Hallo , erstmal herzlichen Dank an Stefan (Stefan_Walther@gehag-dsk.de) und Christian (zoz@suse.de). Das erste Problem ist gelöst, ich hatte im Kernel tatsächlich native language support 437 ausgeschaltet. Naja, vielleicht aus Lokalpatriotismus ;-) 2. Sound Ich habe also alsa komplett aus der modules.conf verbannt und arbeite mit dem kernel- modul maestro3 (experimental). Trotzdem versucht irgendeiner char-major-116 zu laden. Wo könnte das stehen? Ich kann jetzt auch meine mp3 über xmms hören, aber dann gehen die Systemsounds nicht mehr. Der Mixer zeigt mir 2 leere Sektionen an: "Ungültiger Mixer ESS Maestro3", "Ungültiger Mixer mixer00" und dann die funktionierende "SigmaTel STAC9721/23". Wo kann man die falschen Einträge entfernen ? Anscheinend klappt das mit dem maestro3- Treiber doch noch nicht so doll. Wenn ich alsa einsetzen will, muß ich dann alle anderen Sound- Module aus dem Kernel deaktivieren oder muß ich wenigstens "Sound card support" aktiviert lassen? 3. PCI lspci -v 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) Flags: bus master, fast devsel, latency 0 Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [88] #09 [f104] Capabilities: [a0] AGP version 2.0 00:01.0 PCI bridge: Intel Corporation: Unknown device 1131 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: e8000000-ebffffff 00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (-M) (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=08, sec-latency=32 I/O behind bridge: 0000d000-0000ffff Memory behind bridge: f2000000-fbffffff 00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge (ICH2-M) (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100 (-M) (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation: Unknown device 4541 Flags: bus master, medium devsel, latency 0 I/O ports at bfa0 [size=16] 00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A) (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation: Unknown device 4541 Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at bce0 [size=32] 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Mobility M4 AGP (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00a4 Flags: VGA palette snoop, stepping, 66Mhz, medium devsel, IRQ 11 Memory at e8000000 (32-bit, prefetchable) [size=64M] I/O ports at cc00 [size=256] Memory at fcffc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Capabilities: [5c] Power Management version 2 02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10) Subsystem: Dell Computer Corporation: Unknown device 00a4 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at dc00 [size=256] Memory at f6ffe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [c0] Power Management version 2 02:06.0 PCI bridge: Action Tec Electronics Inc: Unknown device 0100 (rev 11) (prog-if 00 [Normal decode]) Flags: bus master, medium devsel, latency 32 Bus: primary=02, secondary=08, subordinate=08, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-f9ffffff Capabilities: [80] Power Management version 2 Capabilities: [90] #06 [0000] 02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller Subsystem: Dell Computer Corporation: Unknown device 00a4 Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at f2000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=04, subordinate=04, sec-latency=176 Memory window 0: f2400000-f27ff000 (prefetchable) Memory window 1: f2800000-f2bff000 I/O window 0: 0000d000-0000d0ff I/O window 1: 0000d400-0000d4ff 16-bit legacy interface ports at 0001 02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller Subsystem: Dell Computer Corporation: Unknown device 00a4 Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at f2001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=05, subordinate=05, sec-latency=176 Memory window 0: f2c00000-f2fff000 (prefetchable) Memory window 1: f3000000-f33ff000 I/O window 0: 0000d800-0000d8ff I/O window 1: 0000f000-0000f0ff 16-bit legacy interface ports at 0001 02:0f.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8027 (prog-if 10 [OHCI]) Subsystem: Dell Computer Corporation: Unknown device 00a4 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at f6ffd800 (32-bit, non-prefetchable) [size=2K] Memory at f6ff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 08:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08) Subsystem: Action Tec Electronics Inc: Unknown device 1100 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at f8fff000 (32-bit, non-prefetchable) [size=4K] I/O ports at ecc0 [size=64] Memory at f8e00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2 08:08.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) Subsystem: Action Tec Electronics Inc: Unknown device 2400 Flags: bus master, medium devsel, latency 0, IRQ 11 Memory at f8ffec00 (32-bit, non-prefetchable) [size=256] I/O ports at ecb8 [size=8] I/O ports at e800 [size=256] Capabilities: [f8] Power Management version 2 4. PCMCIA Wozu die HST- Saphir kompatibel ist, weiß ich noch nicht. Die PCI oder ISA Version wird jedenfalls unterstützt (laut SuSE Hardwaredatenbank)

PCMCIA sollte besser als Module verwendet werden. Wenn Du eine Zeile: PCMCIA=yenta_socket in die rc.config einfügst, müßte das Start-Script eigentlich funktionieren.

Wie das suseconf haut mir doch die Zeile wieder raus ?

... weil kein D.Hinds-PCMCIA für den aktuellen Kernel da ist. Macht aber nix.

Und das bedeuted ?

...

Master Resource Control: runlevel 5 has been reached (Christian) Hauptsache bunt ;)

man gönnt sich ja sonst nichts pansen