Suse Linux 8.0 Thinkpad A20p und PCMCIA D-Link DWL650 WLAN funktioniert nicht !
Hallo, kann mir vielleicht jemand einen Tip geben? Als Als Newbie bin ich fuer jeden Tip dankbar. Suse Linux 8.0 Kernel 2.4.18 Thinkpad A20p D-Link DWL 650 Wirleless PCMCIA mit Intersil PRISM2 Chipsatz. Wenn die Karte reingeschoben wird höre ich zwei kurz Beeps was anscheinend ein gutes Zeichen ist. In /var/log messages, macht mich aber einiges stutzig, vorallem: prism2_cs: CardServices release does not match! Auszüge aus /var/log/messages und Resultate von cardctl ident & status, sowie lsmod sind unten angehängt. MfG :-) Dirk May 27 17:41:41 merlin cardmgr[554]: executing: 'rmmod prism2_cs' May 27 17:41:42 merlin cardmgr[554]: + rmmod: module prism2_cs is not loaded May 27 17:41:42 merlin cardmgr[554]: rmmod exited with status 1 May 27 17:43:09 merlin cardmgr[554]: socket 0: Intersil PRISM2 Reference Design 11Mb/s WLAN Card May 27 17:43:09 merlin cardmgr[554]: executing: 'insmod -v /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o' May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol p80211pb_alloc_p80211 May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol p802addr_to_str May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol p80211pb_free May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol register_wlandev May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol p80211netdev_rx May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol unregister_wlandev May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol wlan_setup May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol p80211ind_sniff May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o: unresolved symbol wlan_unsetup May 27 17:43:09 merlin cardmgr[554]: + Using /lib/modules/2.4.18-4GB//pcmcia/prism2_cs.o May 27 17:43:09 merlin cardmgr[554]: + Symbol version prefix '' May 27 17:43:09 merlin cardmgr[554]: insmod exited with status 1 May 27 17:43:09 merlin cardmgr[554]: executing: 'modprobe -v prism2_cs' May 27 17:43:09 merlin cardmgr[554]: + /sbin/insmod /lib/modules/2.4.18-4GB/wlan-ng/p80211.o May 27 17:43:09 merlin cardmgr[554]: + Using /lib/modules/2.4.18-4GB/wlan-ng/p80211.o May 27 17:43:09 merlin cardmgr[554]: + Symbol version prefix '' May 27 17:43:09 merlin cardmgr[554]: + /sbin/insmod /lib/modules/2.4.18-4GB/wlan-ng/prism2_cs.o May 27 17:43:09 merlin cardmgr[554]: + Using /lib/modules/2.4.18-4GB/wlan-ng/prism2_cs.o May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB/wlan-ng/prism2_cs.o: init_module: Operation not permitted May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB/wlan-ng/prism2_cs.o: insmod /lib/modules/2.4.18-4GB/wlan-ng/prism2_cs.o failed May 27 17:43:09 merlin cardmgr[554]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters May 27 17:43:09 merlin cardmgr[554]: + # delete p80211 May 27 17:43:09 merlin cardmgr[554]: + /sbin/insmod /lib/modules/2.4.18-4GB/wlan-ng/p80211.o May 27 17:43:09 merlin cardmgr[554]: + Using /lib/modules/2.4.18-4GB/wlan-ng/p80211.o May 27 17:43:09 merlin cardmgr[554]: + /sbin/insmod /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o May 27 17:43:09 merlin cardmgr[554]: + Using /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o: init_module: Operation not permitted May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o: insmod /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o failed May 27 17:43:09 merlin cardmgr[554]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters May 27 17:43:09 merlin cardmgr[554]: + # delete p80211 May 27 17:43:09 merlin cardmgr[554]: + /lib/modules/2.4.18-4GB/pcmcia-external/prism2_cs.o: insmod prism2_cs failed May 27 17:43:09 merlin cardmgr[554]: modprobe exited with status 255 May 27 17:43:10 merlin kernel: init_module: prism2_cs.o: 0.1.13-devel1 Loaded May 27 17:43:10 merlin kernel: init_module: dev_info is: prism2_cs May 27 17:43:10 merlin kernel: prism2_cs: CardServices release does not match! May 27 17:43:10 merlin kernel: p80211.o: 0.1.13-devel1 Unloaded May 27 17:43:10 merlin kernel: init_module: prism2_cs.o: 0.1.13-devel1 Loaded May 27 17:43:10 merlin kernel: init_module: dev_info is: prism2_cs May 27 17:43:10 merlin kernel: prism2_cs: CardServices release does not match! May 27 17:43:10 merlin kernel: p80211.o: 0.1.13-devel1 Unloaded May 27 17:43:11 merlin cardmgr[554]: get dev info on socket 0 failed: Resource temporarily unavailable merlin:~ # cardctl ident Socket 0: product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", "" manfid: 0x0156, 0x0002 function: 6 (network) Socket 1: product info: "SONY", "MEMORYSTICK( 4M)", "1.0" manfid: 0x00f1, 0x0000 function: 4 (fixed disk) merlin:~ # cardctl status Socket 0: 3.3V 16-bit PC Card function 0: [ready], [bat low] Socket 1: 3.3V 16-bit PC Card function 0: [ready], [bat dead], [bat low] merlin:~ # lsmod Module Size Used by Tainted: P ide-cs 3264 1 nls_iso8859-1 2880 1 (autoclean) nls_cp437 4384 1 (autoclean) vfat 9244 1 (autoclean) fat 28984 0 (autoclean) [vfat] ppp_deflate 39456 0 (autoclean) bsd_comp 4032 0 (autoclean) ppp_async 6080 0 (autoclean) ppp_generic 14984 0 (autoclean) [ppp_deflate bsd_comp ppp_async] slhc 4432 0 (autoclean) [ppp_generic] lt_serial 20384 2 (autoclean) lt_modem 314432 0 (autoclean) [lt_serial] snd-pcm-oss 45152 0 (autoclean) snd-mixer-oss 11136 0 (autoclean) r128 87704 25 agpgart 29664 3 (autoclean) parport_pc 25448 1 (autoclean) lp 5824 0 (autoclean) parport 21856 1 (autoclean) [parport_pc lp] ipv6 123424 -1 (autoclean) snd-cs46xx 72644 0 snd-pcm 58528 0 [snd-pcm-oss snd-cs46xx] snd-timer 11456 0 [snd-pcm] snd-rawmidi 13536 0 [snd-cs46xx] snd-seq-device 4336 0 [snd-rawmidi] snd-ac97-codec 24196 0 [snd-cs46xx] snd 31720 0 [snd-pcm-oss snd-mixer-oss snd-cs46xx snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec] soundcore 3268 5 [snd] ds 6368 4 [ide-cs] yenta_socket 8384 2 pcmcia_core 37984 0 [ide-cs ds yenta_socket] isa-pnp 27816 0 (unused) joydev 5728 0 (unused) evdev 3904 0 (unused) input 3072 0 [joydev evdev] usb-uhci 20996 0 (unused) usbcore 55136 1 [usb-uhci] e100 69272 1 reiserfs 158816 1
Hallo Dirk, On Tue, 28 May 2002 deekee@bluewin.ch wrote:
Suse Linux 8.0 Kernel 2.4.18 Thinkpad A20p D-Link DWL 650 Wirleless PCMCIA mit Intersil PRISM2 Chipsatz. Wenn die Karte reingeschoben wird höre ich zwei kurz Beeps was anscheinend ein gutes Zeichen ist. In /var/log messages, macht mich aber einiges stutzig, vorallem: prism2_cs: CardServices release does not match! Auszüge aus /var/log/messages und Resultate von cardctl ident & status, sowie lsmod sind unten angehängt.
Vielleicht hilft folgende URL weiter http://www.holtmann.org/linux/wlan/ Viele Grüße Andrea
participants (2)
-
Andrea Ratschker
-
deekee@bluewin.ch