Hallo Leute, ich wende mich gleich mit einer ganzen Latte von Problemen an Euch und hoffe, daß Ihr mir helfen könnt und wollt. Die Inhalte der log- Dateien boot.msg, messages und warn habe ich hinten angehängt. Bisher lief auf meinem Dell Inspiron SuSE 7.1 mit Kernel 2.4.0. PCMCIA ------------- Da hatte ich das Problem, daß PCMCIA nicht lief. Das ließ sich aber teilweise beheben indem ich dem Tip folgte und in der Datei/etc/pcmcia/config.opt folgende Änderungen vornahm: include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff durch include port 0x100-0x4ff, port 0xc00-0xcff ersetzt Der CardManager läuft jetzt aber es gibt immernoch Probleme mit dem Laden von Modulen und meine PCMCIA ISDN-Karte HST- Saphir läuft nicht. Die entsprechenden Meldungen -- siehe boot.msg. Nun will ich aber Fire Wire benutzen und habe mir einen Kern 2.4.5 gebaut. Der läuft nun auch aber die obigen Probleme existieren immernoch. Hinzugekommen sind folgende Probleme. AUTOMOUNT -------------------- Beim Versuch, meine Win- Partitionen zu mounten findet er ein paar Module nicht mehr modprobe: modprobe: Can't locate module nls_cp437 keine Ahnung, was das für Module sind. Die Partitionen sind dann zwar gemountet aber als normaler user kann ich trotz unmask in der fstab nicht darauf schreiben. SOUNDKARTE ---------------------- Ich habe im Kernel die maestro 3 als Modul angegeben. Alsa habe ich neu gebaut und installiert. Dann habe ich mit Yast2 die Soundkarte eingerichtet und es funktionierte------ bis zum nächsten Systemstart. Dann traten die Fehlermeldungen auf. Ich deute das so, er hat wahrscheinlich das Device nicht dauerhaft generiert. Der Versuch, die Soundkarte mit alsaconf zu konfigurieren scheiterte von Anfang an. Das Tool findet keinerlei Soundkarten und beendet sich. PCI ------- Außerdem meckert Linux, weil die IRQ's mehrfach belegt sind, ich habe aber noch keine Möglichkeit gefunden, die Sache manuell im Bios einzustellen. ACPI --------- Das Powermanagement funktioniert auch nicht mehr. Angeblich ist es nicht installiert. Bitte helft mir !!! Pansen :-) ******************************************************** boot.msg: Inspecting /boot/System.map-2.4.5 Loaded 15055 symbols from /boot/System.map-2.4.5. Symbols match kernel version 2.4.5. Loaded 65 symbols from 4 modules. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.5 (root@nb_std) (gcc version 2.95.2 19991024 (release)) #5 Sam Jul 7 22:37:42 CEST 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000ffec000 (usable) <4> BIOS-e820: 000000000ffec000 - 000000000fff0000 (reserved) <4> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) <4>On node 0 totalpages: 65516 <4>zone(0): 4096 pages. <4>zone(1): 61420 pages. <4>zone(2): 0 pages. <4>Kernel command line: auto BOOT_IMAGE=linux-2.4.5 ro root=309 BOOT_FILE=/boot/vmlinuz-2.4.5 <6>Initializing CPU#0 <4>Detected 598.696 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 1196.03 BogoMIPS <4>Memory: 255380k/262064k available (1138k kernel code, 6296k reserved, 392k data, 176k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <7>CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: Common caps: 0383f9ff 00000000 00000000 00000000 <4>CPU: Intel Pentium III (Coppermine) stepping 06 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=8 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 2: assuming transparent <3>Unknown bridge resource 2: assuming transparent <6>PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0 <3> got res[f2000000:f2000fff] for resource 0 of Texas Instruments PCI4451 PC card Cardbus Controller <3> got res[f2001000:f2001fff] for resource 0 of Texas Instruments PCI4451 PC card Cardbus Controller (#2) <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Starting kswapd v1.8 <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS02 at 0x03e8 (irq = 4) is a 16550A <4>block: queued sectors max/low 169693kB/56564kB, 512 slots per queue <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=244a <4>PCI_IDE: chipset revision 2 <4>PCI_IDE: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio <4>hda: HITACHI_DK23BA-20, ATA DISK drive <4>hdb: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive <4>ide2: ports already in use, skipping probe <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63 <4>hdb: ATAPI 24X DVD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html <4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others <6>eth0: OEM i82557/i82558 10/100 Ethernet, 00:20:E0:64:91:D4, IRQ 11. <6> Receiver lock-up bug exists -- enabling work-around. <6> Board assembly 727095-002, Physical connectors present: RJ45 <6> Primary interface chip i82555 PHY #1. <6> General self-test: passed. <6> Serial sub-system self-test: passed. <6> Internal registers self-test: passed. <6> ROM checksum self-test: passed (0x04f4518b). <6> Receiver lock-up workaround activated. <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 203M <3>agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card. <6>agpgart: Detected Intel i815 chipset <6>agpgart: AGP aperture is 64M @ 0xe4000000 <6>Linux PCMCIA Card Services 3.1.22 <6> options: [pci] [cardbus] [pm] <6>PCI: Found IRQ 11 for device 02:0f.0 <6>PCI: The same IRQ used for device 00:1f.2 <6>PCI: The same IRQ used for device 02:0f.1 <6>PCI: The same IRQ used for device 02:0f.2 <6>PCI: Found IRQ 11 for device 02:0f.1 <6>PCI: The same IRQ used for device 00:1f.2 <6>PCI: The same IRQ used for device 02:0f.0 <6>PCI: The same IRQ used for device 02:0f.2 <4>Yenta IRQ list 0688, PCI irq11 <4>Socket status: 30000006 <4>Yenta IRQ list 0688, PCI irq11 <4>Socket status: 30000010 <6>ACPI: Core Subsystem version [20010208] <3>ACPI: Subsystem enabled <6>ACPI: System firmware supports: C2 <6>ACPI: plvl2lat=50 plvl3lat=2000 <6>ACPI: C2 enter=715 C2 exit=178 <6>ACPI: C3 enter=-1 C3 exit=-1 <6>ACPI: Using ACPI idle <6>ACPI: If experiencing system slowness, try adding "acpi=no-idle" to cmdline <6>ACPI: System firmware supports: S0 S1 S3 S4 S5 <6>AC Adapter: found <6>Cmbatt: Battery socket 0 empty <6>Cmbatt: Battery socket 1 occupied <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 2048 buckets, 16Kbytes <4>TCP: Hash tables configured (established 16384 bind 16384) <4>reiserfs: checking transaction log (device 03:09) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>Freeing unused kernel memory: 176k freed <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>Adding Swap: 530104k swap-space (priority -1) <4>reiserfs: checking transaction log (device 03:07) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started at Tue Jul 10 10:48:46 2001 Activating swap-devices in /etc/fstab... done Checking file systems... Parallelizing fsck version 1.19a (13-Jul-2000) done Setting up the CMOS clock done Mounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda7 on /boot type reiserfs (rw) modprobe: modprobe: Can't locate module nls_cp437 /dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,unmask) modprobe: modprobe: Can't locate module nls_cp437 /dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,unmask) modprobe: modprobe: Can't locate module nls_cp437 /dev/hda6 on /windows/E type vfat (rw,noexec,nosuid,nodev,unmask) modprobe: modprobe: Can't locate module nls_cp437 /dev/hda10 on /windows/F type vfat (rw,noexec,nosuid,nodev,unmask) done Setting up timezone data done Setting up loopback device done Setting up hostname done Mount SHM FS on /dev/shm done Configuring serial ports... Configuring serial ports done Running /etc/init.d/boot.local done Creating /var/log/boot.msg done Enabling dynamic IP patch done Disabling IP forwarding done INIT: Entering runlevel: 5 Boot logging started at Tue Jul 10 08:48:54 2001 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Loading ISDN drivers ... /dev/isdnctrl: No such device Enabling ide dma mode: hda done Initializing random number generator done /dev/isdninfo: No such device Setting up network device eth0 done PCMCIA: Starting services: PCMCIA: using scheme: SuSE modprobe: Can't locate module pcmcia_core modprobe: Can't locate module pcmcia_core modprobe: Can't locate module i82365 modprobe: Can't locate module i82365 modprobe: Can't locate module ds cardmgr[176]: starting, version is 3.1.22 PCMCIA: cardmanager is running cardmgr[176]: watching 2 sockets cardmgr[176]: initializing socket 1 cardmgr[176]: unsupported card in socket 1 cardmgr[176]: product info: "(c) HST High Soft Tech GmbH", "HST-Saphir PCMCIA", " " cardmgr[176]: manfid: 0x020c, 0x0003 function: 6 (network) done Setting up routing (using /etc/route.conf) done Starting RPC portmap daemon done Starting SSH daemon done Starting syslog services done Starting lpd done Starting service usbmgr done Starting service at daemon: done Loading keymap qwertz/de-latin1-nodeadkeys.map.gz done Loading compose table winkeys shiftctrl latin1.add done Loading console font lat1-16.psfu done Loading unimap lat1u.uni done Setting up console ttys done Starting Name Service Cache Daemon done Starting CRON daemon done Starting service kdm done Starting inetd done Starting sound driver: snd-card-maestro3 /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod /lib/modules/2.4.5/misc/snd-card-maestro3.o failed /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-maestro3 failed done Master Resource Control: runlevel 5 has been reached ***************************************************************** /var/log/messages Jul 10 08:48:59 nb_std syslogd 1.3-3: restart. Jul 10 08:49:01 nb_std usbmgr[241]: start 0.4.1 Jul 10 08:49:01 nb_std usbmgr[243]: "hid" was loaded Jul 10 08:49:01 nb_std usbmgr[243]: "mousedev" was loaded Jul 10 08:49:01 nb_std usbmgr[243]: "usb-uhci" was loaded Jul 10 08:49:01 nb_std usbmgr[256]: mount /proc/bus/usb Jul 10 08:49:01 nb_std usbmgr[243]: bye! Jul 10 08:49:02 nb_std kernel: klogd 1.3-3, log source = /proc/kmsg started. Jul 10 08:49:02 nb_std kernel: Inspecting /boot/System.map-2.4.5 Jul 10 08:49:02 nb_std kernel: Loaded 15055 symbols from /boot/System.map-2.4.5. Jul 10 08:49:02 nb_std kernel: Symbols match kernel version 2.4.5. Jul 10 08:49:02 nb_std kernel: Loaded 219 symbols from 9 modules. Jul 10 08:49:02 nb_std kernel: cs: IO port probe 0x0c00-0x0cff: clean. Jul 10 08:49:02 nb_std kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x290-0x297 0x370-0x37f 0x4d0-0x4d7 Jul 10 08:49:02 nb_std kernel: cs: IO port probe 0x0a00-0x0aff: clean. Jul 10 08:49:02 nb_std kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jul 10 08:49:02 nb_std kernel: usb.c: registered new driver hub Jul 10 08:49:02 nb_std kernel: usb-uhci.c: $Revision: 1.259 $ time 22:45:34 Jul 7 2001 Jul 10 08:49:02 nb_std kernel: usb-uhci.c: High bandwidth mode enabled Jul 10 08:49:02 nb_std kernel: PCI: Found IRQ 11 for device 00:1f.2 Jul 10 08:49:02 nb_std kernel: PCI: The same IRQ used for device 02:0f.0 Jul 10 08:49:02 nb_std kernel: PCI: The same IRQ used for device 02:0f.1 Jul 10 08:49:02 nb_std kernel: PCI: The same IRQ used for device 02:0f.2 Jul 10 08:49:02 nb_std kernel: PCI: Setting latency timer of device 00:1f.2 to 64 Jul 10 08:49:02 nb_std kernel: usb-uhci.c: USB UHCI at I/O 0xbce0, IRQ 11 Jul 10 08:49:02 nb_std kernel: usb-uhci.c: Detected 2 ports Jul 10 08:49:02 nb_std kernel: usb.c: new USB bus registered, assigned bus number 1 Jul 10 08:49:02 nb_std kernel: hub.c: USB hub found Jul 10 08:49:02 nb_std kernel: hub.c: 2 ports detected Jul 10 08:49:02 nb_std kernel: usb-uhci.c: v1.251 Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber Jul 10 08:49:02 nb_std kernel: usb-uhci.c: USB Universal Host Controller Interface driver Jul 10 08:49:02 nb_std kernel: usb.c: registered new driver hid Jul 10 08:49:02 nb_std kernel: hid.c: v1.16 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> Jul 10 08:49:02 nb_std kernel: hid.c: USB HID support drivers Jul 10 08:49:02 nb_std kernel: mice: PS/2 mouse device common for all mice Jul 10 08:49:02 nb_std kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Jul 10 08:49:02 nb_std kernel: mouse0: PS/2 mouse device for input0 Jul 10 08:49:02 nb_std kernel: input0: USB HID v1.00 Mouse [Cypress Sem. PS2/USB Browser Combo Mouse] on usb1:2.0 Jul 10 08:49:03 nb_std /usr/sbin/cron[338]: (CRON) STARTUP (fork ok) Jul 10 08:49:05 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:36 nb_std PAM-unix2[392]: session started for user root, service xdm Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod sound-slot-0 failed Jul 10 08:49:47 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:47 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod sound-slot-0 failed Jul 10 08:49:47 nb_std modprobe: modprobe: Can't locate module sound-slot-1 Jul 10 08:49:47 nb_std modprobe: modprobe: Can't locate module sound-service-1-0 Jul 10 08:49:47 nb_std modprobe: modprobe: Can't locate module sound-slot-1 Jul 10 08:49:47 nb_std modprobe: modprobe: Can't locate module sound-service-1-0 Jul 10 08:49:59 nb_std kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:59 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:59 nb_std insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 10 08:49:59 nb_std insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed ********************************************************* /var/log/warn Jul 10 08:49:02 nb_schilling kernel: PCI: Setting latency timer of device 00:1f.2 to 64 Jul 10 08:49:02 nb_schilling kernel: usb-uhci.c: Detected 2 ports Jul 10 08:49:05 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod sound-slot-0 failed Jul 10 08:49:47 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:47 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod sound-slot-0 failed Jul 10 08:49:47 nb_schilling modprobe: modprobe: Can't locate module sound-slot-1 Jul 10 08:49:47 nb_schilling modprobe: modprobe: Can't locate module sound-service-1-0 Jul 10 08:49:47 nb_schilling modprobe: modprobe: Can't locate module sound-slot-1 Jul 10 08:49:47 nb_schilling modprobe: modprobe: Can't locate module sound-service-1-0 Jul 10 08:49:59 nb_schilling kernel: ALSA card-maestro3.c:2579: Maestro3/Allegro soundcard not found or device busy Jul 10 08:49:59 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: init_module: No such device Jul 10 08:49:59 nb_schilling insmod: /lib/modules/2.4.5/misc/snd-card-maestro3.o: insmod snd-card-0 failed