Hallo Liste! Ich habe bei meinem Acer TM661 (Centrino-Chipsatz, leider)(Intel 855GM). WLAN und Smart-Media-Reader habe ich vorerst aufgegeben, aber zumindest die Auflösung von 1400x1050 sollte funktionieren, da sonst alles etwas verschwommen (interpoliert) aussieht. Nur leider schaffe ich es nicht! Ich bekommen folgende Fehlermeldung, wenn ich mit sax2 einrichte: (EE) I810(0): No valid modes. (EE) Screen(s) found, but none have a usable configuration. Muß ich Modelines selbst ändern? Habe ich auch mit Beispielen versucht, hat gar nichts gebracht. Ausschnitte aus /etc/X11/XF86Config: *************************************************************************** Section "Monitor" Option "CalcAlgorithm" "CheckDesktopGeometry" DisplaySize 320 240 HorizSync 30-90 Identifier "Monitor[0]" ModelName "1400X1050@60HZ" Option "DPMS" VendorName "--> LCD" VertRefresh 40-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 102.24 1280 1296 1552 1736 1024 1024 1033 1070 Modeline "1400x1050" 114.41 1400 1416 1704 1944 1050 1050 1060 1097 Modeline "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" EndSubSection SubSection "Display" Depth 24 Modes "1400x1050" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "855 GM" BusID "0:2:0" Driver "i810" Identifier "Device[0]" VendorName "Intel" EndSection *************************************************************************** Ausschnitte aus /var/log/SaX.log: *************************************************************************** (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,3580 card 1025,0035 rev 02 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 8086,3584 card 1025,0035 rev 02 class 08,80,00 hdr 00 (II) PCI: 00:00:3: chip 8086,3585 card 1025,0035 rev 02 class 08,80,00 hdr 80 (II) PCI: 00:02:0: chip 8086,3582 card 1025,0035 rev 02 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,3582 card 1025,0035 rev 02 class 03,80,00 hdr 80 (II) PCI: 00:1d:0: chip 8086,24c2 card 1025,0035 rev 03 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1025,0035 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1025,0035 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1025,0035 rev 03 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24ca card 1025,0035 rev 03 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1025,0035 rev 03 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1025,0035 rev 03 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,24c6 card 1025,0035 rev 03 class 07,03,00 hdr 00 (II) PCI: 02:02:0: chip 14e4,4401 card 1025,0035 rev 01 class 02,00,00 hdr 00 (II) PCI: 02:04:0: chip 8086,1043 card 8086,2527 rev 04 class 02,80,00 hdr 00 (II) PCI: 02:06:0: chip 1217,7113 card 3401,0000 rev 20 class 06,07,00 hdr 82 (II) PCI: 02:06:1: chip 1217,7113 card 3c01,0000 rev 20 class 06,07,00 hdr 82 (II) PCI: 02:07:0: chip 104c,8026 card 1025,0035 rev 00 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (--) PCI:*(0:2:0) Intel Corp. 852GM/852GME/855GM/855GME Chipset Graphics Controller rev 2, Mem @ 0xe8000000/27, 0xe0000000/19, I/O @ 0x1800/3 (--) PCI: (0:2:1) Intel Corp. 852GM/852GME/855GM/855GME Chipset Graphics Controller rev 2, Mem @ 0xf0000000/27, 0xe0080000/19 ....... (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): Integrated Graphics Chipset: Intel(R) 855GM (--) I810(0): Chipset: "852GM/855GM" (--) I810(0): Linear framebuffer at 0xE8000000 (--) I810(0): IO registers at addr 0xE0000000 (II) I810(0): detected 16252 kB stolen memory. (II) I810(0): I830CheckAvailableMemory: 433076 kB available (--) I810(0): Pre-allocated VideoRAM: 16252 kByte (==) I810(0): VideoRAM: 32768 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (--) I810(0): Maximum frambuffer space: 32616 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): 2 display pipes available. (II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (800,600) (II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (800,600) (II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1400,1050) (II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Size of device LFP (local flat panel) is 1400 x 1050 (II) I810(0): No active displays on Pipe A. (II) I810(0): Currently active displays on Pipe B: (II) I810(0): LFP (local flat panel) (II) I810(0): Lowest common panel size for pipe B is 1400 x 1050 ......... (II) I810(0): Monitor[0]: Using hsync range of 30.00-90.00 kHz (II) I810(0): Monitor[0]: Using vrefresh range of 40.00-60.00 Hz (II) I810(0): Not using mode "1400x1050" (no mode of this name) (II) I810(0): Not using built-in mode "1280x1024" (width too large for virtual size) (II) I810(0): Not using built-in mode "1024x768" (width too large for virtual size) (II) I810(0): Not using built-in mode "800x600" (width too large for virtual size) (II) I810(0): Not using built-in mode "640x480" (width too large for virtual size) (EE) I810(0): No valid modes. (II) Unloading /usr/X11R6/lib/modules/libddc.a (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (II) Unloading /usr/X11R6/lib/modules/libvbe.a (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found *************************************************************************** was bedeutet: (II) I810(0): Not using mode "1400x1050" (no mode of this name) unter Windoof geht es ja auch... Ich hätte auch schon mal den original Intel-Treiber auprobiert, ist aber nur binär für Kernel 2.4.18 und 2.4.19 verfügbar, ich habe SuSE-Linux 8.2 mit Kernel 2.4.20 und manchmal 2.4.21. Hat jemand eine Idee, wie ich an den richtigen Modus rankomme? Danke im voraus, Günther