Moin, Ich benutze eine Compaq Presario 716 EA Laptop unter SUSE 8.2 mit einer D-Link DWL 650+ W-Lan Karte mit dem 0.1h Treiber. Die Karte wird richtig erkannt und der Treiber vollstaendig installiert, gscannt, ob ein W-Lan verfuegbar ist und auch der vorhandene AP korrekt gefunden (gem. log und AP-Log). Trotzdem kann keine Datenverbindung zum AP aufgebaut werden. Im Abstand von ca. 0,1 Sekunden kommt folgende Meldung: Nov 10 17:49:08 silber kernel: Receiving packet 04 (MGMT/Beacon): fc 0x0080, length 65, mode = 2, iStatus 2 Nov 10 17:49:08 silber kernel: pkt c0022eba info: time 12287862, silence 152, signal 0 Wo steckt der Fehler? Vielen Dank, Joerg Der gesamte Verbindungsaufbau generiert folgenden Log: ----- LOG-File: ----- Nov 10 17:48:55 silber cardmgr[1097]: socket 0: CardBus hotplug device Nov 10 17:48:55 silber kernel: acx100: It looks like you were coaxed into buying a wireless network card Nov 10 17:48:55 silber kernel: acx100: that uses the mysterious ACX100 chip from Texas Instruments. Nov 10 17:48:55 silber kernel: acx100: You should better have bought e.g. a PRISM(R) chipset based card, Nov 10 17:48:55 silber kernel: acx100: since that would mean REAL vendor Linux support. Nov 10 17:48:55 silber kernel: acx100: Given this info, it's plain evident that this driver is EXPERIMENTAL, Nov 10 17:48:55 silber kernel: acx100: thus your mileage may vary. Visit http://acx100.sf.net for support. Nov 10 17:48:55 silber kernel: init_module: TI acx100_pci.o: Ver 0.1h Loaded Nov 10 17:48:55 silber kernel: init_module: dev_info is: TI acx100_pci Nov 10 17:48:55 silber kernel: PCI: Setting latency timer of device 02:00.0 to 64 Nov 10 17:48:55 silber kernel: A Acx100 PCI device found, phymem1:0xfbbfd000, phymem2:0xfbc00000, irq:11, mem1:0xd0924000, mem2:0xd0926000 Nov 10 17:48:55 silber kernel: stop queue after setup. Nov 10 17:48:56 silber kernel: Allocated 33708 bytes for firmware module loading. Nov 10 17:48:56 silber kernel: WriteACXImage (firmware): 1, ValidateACXImage: 1 Nov 10 17:48:56 silber kernel: ****************************************** Nov 10 17:48:56 silber kernel: ************ acx100_initmac_1 ************ Nov 10 17:48:56 silber kernel: ****************************************** Nov 10 17:48:56 silber kernel: ==> Get the mailbox pointers from the scratch pad registers Nov 10 17:48:56 silber kernel: CmdMailboxOffset = fdc8 Nov 10 17:48:56 silber kernel: InfoMailboxOffset = ff4c Nov 10 17:48:56 silber kernel: <== Get the mailbox pointers from the scratch pad registers Nov 10 17:48:56 silber kernel: CommandParameters = [ 0xD0935DCC ] Nov 10 17:48:56 silber kernel: InfoParameters = [ 0xD0935F50 ] Nov 10 17:48:56 silber kernel: Allocated 964 bytes for firmware module loading. Nov 10 17:48:56 silber kernel: WriteACXImage (radio): 1, ValidateACXImage: 1 Nov 10 17:48:56 silber kernel: CodeEnd:875C Nov 10 17:48:56 silber kernel: writing WEP options. Nov 10 17:48:56 silber kernel: <== Initialize the Queue Indicator Nov 10 17:48:56 silber kernel: pDc->pFrameHdrQPool = 0xc0360000 Nov 10 17:48:56 silber kernel: pDc->pFrameHdrQPoolPhyAddr = 0x 360000 Nov 10 17:48:56 silber kernel: pDc->TxBufferPool = 0xc0340000 Nov 10 17:48:56 silber kernel: pDc->TxBufferPoolPhyAddr = 0x 340000 Nov 10 17:48:56 silber kernel: pDc->pTxHostDescQPool = 0xc033f000 Nov 10 17:48:56 silber kernel: pDc->TxHostDescQPoolPhyAddr = 0x 33f000 Nov 10 17:48:56 silber kernel: pAdapter->rHWInfo.pvMemBaseAddr2 = 0xd0926000 Nov 10 17:48:56 silber kernel: pDc->ui32ACXTxQueueStart = 0x00008b04 Nov 10 17:48:56 silber kernel: pDc->pTxDescQPool = 0xd092eb04 Nov 10 17:48:56 silber kernel: pDc->pRxHostDescQPool = 0xc033e000 Nov 10 17:48:56 silber kernel: pDc->RxHostDescQPoolPhyAddr = 0x 33e000 Nov 10 17:48:56 silber kernel: pDc->pRxBufferPool = 0xc0020000 Nov 10 17:48:56 silber kernel: pDc->RxBufferPoolPhyAddr = 0x 20000 Nov 10 17:48:56 silber kernel: SSID = STAC7E863, len = 9 Nov 10 17:48:56 silber kernel: Beacon length:61 Nov 10 17:48:56 silber kernel: SSID = STAC7E863, len = 9 Nov 10 17:48:56 silber kernel: SetProberTemp: cb = 61 Nov 10 17:48:56 silber kernel: acx100: form factor 0x00 (CardBus), radio type 0x11 (RFMD), EEPROM version 0x0000. Uploaded firmware 'Rev 1.9.3.e' (0x01020505). Nov 10 17:48:56 silber insmod: Using /usr/src/packages/SOURCES/acx100/src/acx100_pci.o Nov 10 17:48:56 silber insmod: Symbol version prefix '' Nov 10 17:48:57 silber /etc/hotplug/pci.agent[1070]: writing pcmcia-0 to /var/run/hotplug/net Nov 10 17:48:57 silber SuSEfirewall2: Firewall rules successfully set in QUICKMODE for device(s) " ppp+" Nov 10 17:48:57 silber rpc.statd[1323]: Version 1.0.1 Starting Nov 10 17:48:58 silber /etc/hotplug/net.agent[1174]: Using HW description wlan-pcmcia-0 Nov 10 17:48:58 silber SuSEfirewall2: Firewall rules successfully set in QUICKMODE for device(s) " ppp+" -vvv---vvv- Was bedeuten diese Fehlermeldungen? -vvv---vvv- Nov 10 17:48:58 silber modprobe: modprobe: Can't locate module up Nov 10 17:48:58 silber /etc/hotplug/net.agent[1174]: up: error fetching interface information: Device not found Nov 10 17:49:05 silber kernel: <AcxSetStatus> iStatus = 0 (STARTED) Nov 10 17:49:05 silber kernel: <acx100_set_timer> Elapse = 1500000 Nov 10 17:49:05 silber kernel: ctlIssueCommand failed: INvalid InfoEle [700 uSec] Nov 10 17:49:05 silber kernel: <acx100_join_bssid> BSS_Type = 2 Nov 10 17:49:05 silber kernel: <acx100_join_bssid> JoinBSSID MAC:00 00 00 00 00 00 Nov 10 17:49:05 silber kernel: <AcxSetStatus> iStatus = 1 (SCANNING) Nov 10 17:49:05 silber kernel: <acx100_set_timer> Elapse = 3000000 Nov 10 17:49:05 silber kernel: ctlIssueCommand failed: INvalid InfoEle [650 uSec] Nov 10 17:49:05 silber kernel: <AcxSetStatus> iStatus = 1 (SCANNING) Nov 10 17:49:05 silber kernel: <acx100_set_timer> Elapse = 3000000 Nov 10 17:49:05 silber kernel: ctlIssueCommand failed: INvalid InfoEle [700 uSec] Nov 10 17:49:05 silber kernel: ctlIssueCommand failed: Unknown(0xf) [800 uSec] Nov 10 17:49:05 silber /etc/hotplug/net.agent[1174]: /etc/sysconfig/network/scripts/ifup-route: line 154: route-stack-number: No such file or directory ---^^^---^^^---^^^---^^^---^^^----^^^ Nov 10 17:49:06 silber kernel: pkt c002000c info: time 10854259, silence 158, signal 0 Nov 10 17:49:06 silber kernel: Receiving packet 00 (MGMT/Beacon): fc 0x0080, length 65, mode = 2, iStatus 1 Nov 10 17:49:06 silber kernel: ProcessProbeResponse: found and registered station 0 (00 40 05 CA 61 5D) with ESSID default and channel 6, SIR 158, SNR 0. Nov 10 17:49:06 silber kernel: pkt c0020962 info: time 10956659, silence 164, signal 1 Nov 10 17:49:06 silber kernel: Receiving packet 01 (MGMT/Beacon): fc 0x0080, length 65, mode = 2, iStatus 1 Nov 10 17:49:06 silber kernel: checking station 0 [00 40 05 CA 61 5D] Nov 10 17:49:06 silber kernel: station already in our list, no need to add. Nov 10 17:49:07 silber kernel: Radio scan found 1 stations in this area. Nov 10 17:49:07 silber kernel: <Scan Table> 0: SSID="default",CH=6,SIR=158,SNR=0 Nov 10 17:49:07 silber kernel: ESSID matches: "default" (station), "default" (config) Nov 10 17:49:07 silber kernel: needed_cap 0x01 cap: 0x61 Nov 10 17:49:07 silber kernel: matching station found!! Nov 10 17:49:07 silber kernel: d11CompleteScan: matching station FOUND (idx 0), JOINING (00 40 05 CA 61 5D). Nov 10 17:49:07 silber kernel: <acx100_join_bssid> BSS_Type = 2 Nov 10 17:49:07 silber kernel: <acx100_join_bssid> JoinBSSID MAC:00 40 05 CA 61 5D Nov 10 17:49:07 silber kernel: Sending authentication1 request, awaiting response! Nov 10 17:49:07 silber kernel: Sending packet (MGMT/Authen): length 30, hdr_len 24, pyld_len 6, mode = 2, iStatus 1 Nov 10 17:49:07 silber kernel: <AcxSetStatus> iStatus = 2 (WAIT_AUTH) Nov 10 17:49:07 silber kernel: <acx100_set_timer> Elapse = 1500000 -vvv---vvv---vvv---vvv--- Fehler? ---vvv---vvv---vvv- Nov 10 17:49:07 silber kernel: ctlIssueCommand failed: INvalid InfoEle [1650 uSec] Nov 10 17:49:07 silber kernel: pkt c00212b8 info: time 12049567, silence 178, signal 0 Nov 10 17:49:07 silber kernel: NOT receiving packet (CTL/UNKNOWN): size too small (14) Nov 10 17:49:07 silber kernel: pkt c0021c0e info: time 12083062, silence 184, signal 1 Nov 10 17:49:07 silber kernel: Receiving packet 03 (MGMT/Beacon): fc 0x0080, length 65, mode = 2, iStatus 2 Nov 10 17:49:08 silber kernel: pkt c0022564 info: time 12185462, silence 162, signal 0 Nov 10 17:49:08 silber kernel: Receiving packet 04 (MGMT/Beacon): fc 0x0080, length 65, mode = 2, iStatus 2 Nov 10 17:49:08 silber kernel: pkt c0022eba info: time 12287862, silence 152, signal 0