Hallo, Peter Thill schrieb:
Am Son, 2004-05-30 um 18.51 schrieb helmert:
Hallo,
Peter Thill schrieb:
Am Fre, 2004-05-28 um 21.32 schrieb helmert:
Hallo, auf meinem Laptop (Compaq Evo N800c) lauft die 9.1 mit Kernel 2.6.4-54.5 (nach den SuSE-Updates via Yast). Ich bekomme mein PCMCIA-Satem nicht ordentlich zum Laufen.
[...snip...]
Kennt jemand diesen Fehler und vor allem: weiß jemand, wie damit umzugehen ist?
Unter der 8.1 musste in der /etc/sysconfig/pcmcia der Wert PCMCIA_SYSTEM="external" gesetz werden
... und genau diese Variable gibt es nun nicht mehr, es sind lediglich noch pcmcia_beep und pcmcia_pcic (setzt den socket-Treiber) vorhanden. Wo man das interne KernelSystem ausschalten kann, wird im Handbuch auch nicht beschreiben. Ein neuer Kernel ohne die pcmcia-Option jedenfalls führt zu gar keiner Erkennung. Wolfram
Gefunden auf der Debian Liste: I had similar issues getting PCMCIA going on kernels after 2.6.0-test7. What I did to get it to work was to remove yenta_socket from /etc/modules. After that, it worked perfectly. I'm running sid and 2.6.0.
HTH
die Idee war vielleicht nicht schlecht - in /etc/modprobe.conf habe ich yenta_socket zwar nicht gefunden, aber mit lsmod. Ok - per Hand als root yenta_socket entladen und anschließend die Karte reingesteckt. Das ergab bei /var/log/messages zwar keine Fehlermeldung mehr - aber dafür auch gar keine pcmcia-Erkennung, cardmgr sagt: no sockets found. Dann per modprobe yenta_socket wieder geladen und nun gibt cardmgr folgende Ausgabe:
sonne:/home/wolfram # cardmgr cardmgr[8487]: watching 1 socket cardmgr[8487]: could not adjust resource: IO ports 0xc00-0xcff: Device or resource busy cardmgr[8487]: could not adjust resource: IO ports 0x820-0x8ff: Device or resource busy cardmgr[8487]: could not adjust resource: IO ports 0x800-0x80f: Device or resource busy cardmgr[8487]: could not adjust resource: IO ports 0x3e0-0x4ff: Device or resource busy cardmgr[8487]: could not adjust resource: IO ports 0x100-0x3af: Device or resource busy cardmgr[8487]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error cardmgr[8487]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error cardmgr[8487]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error cardmgr[8487]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy
/var/log/messages liefert:
May 31 19:33:35 sonne cardmgr[8384]: no sockets found! May 31 19:35:39 sonne kernel: Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004a] May 31 19:35:39 sonne kernel: Yenta: Using CSCINT to route CSC interrupts to PCI May 31 19:35:39 sonne kernel: Yenta: Routing CardBus interrupts to PCI May 31 19:35:39 sonne kernel: Yenta: ISA IRQ mask 0x0098, PCI irq 11 May 31 19:35:39 sonne kernel: Socket status: 30000010 May 31 19:35:55 sonne cardmgr[8487]: watching 1 socket May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0xc00-0xcff: Device or resource busy May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0x820-0x8ff: Device or resource busy May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0x800-0x80f: Device or resource busy May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0x3e0-0x4ff: Device or resource busy May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0x100-0x3af: Device or resource busy May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error May 31 19:35:55 sonne cardmgr[8487]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy May 31 19:35:55 sonne kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. May 31 19:35:55 sonne cardmgr[8488]: socket 0: Anonymous Memory May 31 19:35:55 sonne cardmgr[8488]: executing: 'modprobe memory_cs 2>&1' May 31 19:35:55 sonne cardmgr[8488]: + FATAL: Module memory_cs not found. May 31 19:35:55 sonne cardmgr[8488]: modprobe exited with status 1 May 31 19:35:55 sonne cardmgr[8488]: module /lib/modules/2.6.4-54.5-default/pcmcia/memory_cs.o not available May 31 19:35:55 sonne cardmgr[8488]: bind 'memory_cs' to socket 0 failed: Invalid argument
Hilft das jemandem??? Kann jemand damit etwas anfangen??? Um die Anfragen von Stefan Seyfried aufzunehmen:
sonne:/home/wolfram # rpm -q kernel-default kernel-default-2.6.4-54.5
und
sonne:/home/wolfram # uname -a Linux sonne 2.6.4-54.5-default #3 Fri May 28 20:17:24 CEST 2004 i686 i686 i386 GNU/Linux
schließlich noch die komplette Ausgabe von dmesg (sehr lang!!):
sonne:/home/wolfram # dmesg 0000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX do_initcalls init_elf_binfmt NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 No customized DSDT found! ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C047] (00:00) PCI: Probing PCI hardware (bus 00) ... the first call_usermodehelper: pci_bus Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C059._PRT] ACPI: Embedded Controller [C0E5] (gpe 29) ACPI: Power Resource [C156] (off) ACPI: Power Resource [C16A] (off) ACPI: Power Resource [C16E] (off) ACPI: Power Resource [C172] (off) ACPI: Power Resource [C17B] (on) ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [C0C2] (IRQs *5 10 11) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 10 11) ACPI: PCI Interrupt Link [C0C4] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [C0C5] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [C0C6] (IRQs) ACPI: PCI Interrupt Link [C0C7] (IRQs) ACPI: PCI Interrupt Link [C0C8] (IRQs) ACPI: Power Resource [C0E4] (on) ACPI: Power Resource [C1EA] (off) ACPI: Power Resource [C1EB] (off) ACPI: Power Resource [C1EC] (off) ACPI: Power Resource [C1ED] (off) Linux Plug and Play Support v0.97 (c) Adam Belay ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 5 ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI: Cannot allocate resource region 0 of device 0000:02:0e.2 vesafb: framebuffer at 0x88000000, mapped to 0xf8810000, size 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:5687 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Initial HugeTLB pages allocated: 0 ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 SELinux: Registering netfilter hooks Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 37245 bytes, found (1024x768, 17142 bytes, v3). Console: switching to colour frame buffer device 118x41 Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a NS16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio hda: IC25T060ATCS05-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: _NEC DVD_RW ND-5500A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 51 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: Synaptics pass-through port at isa0060/serio4/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 8 NET: Registered protocol family 20 Resume Machine: resuming from /dev/hda6 Resuming from device hda6 Resume Machine: This is normal swap space PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 212k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names subfs 0.9 Adding 1048784k swap on /dev/hda6. Priority:42 extents:1 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03545c0(lo) IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team Disabled Privacy Extensions on device f68e9c00(sit0) ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8190 buckets, 65520 max) - 296 bytes per conntrack e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation e100: eth0: e100_probe: addr 0x80100000, irq 10, MAC addr 00:08:02:67:54:29 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004a] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0098, PCI irq 11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f cs: IO port probe 0x0a00-0x0aff: clean. hw_random: RNG not detected e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff67:54 29 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0 SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff67:54 29 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:02:0e.0: OHCI Host Controller ohci_hcd 0000:02:0e.0: irq 10, pci mem fadf8000 ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 1 SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0208:02ff:fe67:5429 DST=ff02:0000:0000:0000:0000:0000:0000:00 02 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.4-54.5-default ohci_hcd usb usb1: SerialNumber: 0000:02:0e.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:02:0e.1: OHCI Host Controller ohci_hcd 0000:02:0e.1: irq 10, pci mem fad83000 usb 1-1: new low speed USB device using address 2 ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 2 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.4-54.5-default ohci_hcd usb usb2: SerialNumber: 0000:02:0e.1 usb 1-1: Product: USB-PS/2 Optical Mouse usb 1-1: Manufacturer: Logitech hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:02:0e.2: EHCI Host Controller ehci_hcd 0000:02:0e.2: irq 10, pci mem fad5e400 ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:02:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29 usb 1-1: USB disconnect, address 2 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.4-54.5-default ehci_hcd usb usb3: SerialNumber: 0000:02:0e.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected usb 1-1: new low speed USB device using address 3 usb 1-1: Product: USB-PS/2 Optical Mouse usb 1-1: Manufacturer: Logitech vmmon: module license 'unspecified' taints kernel. /dev/vmmon: VMMON CPUID: Unrecognized CPU /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized parport0: PC-style at 0x378 [PCSPP,TRISTATE] vmnet: module license 'unspecified' taints kernel. SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0208:02ff:fe67:5429 DST=ff02:0000:0000:0000:0000:0000:0000:00 02 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0208:02ff:fe67:5429 DST=ff02:0000:0000:0000:0000:0001:ff67:54 29 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0 /dev/vmnet: open called by PID 3587 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0208:02ff:fe67:5429 DST=ff02:0000:0000:0000:0000:0000:0000:00 02 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 eth0: no IPv6 routers present drivers/usb/core/usb.c: registered new driver hiddev input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:0e.0-1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver There is already a security framework initialized, register_security failed. selinux_register_security: There is already a secondary security module registered. dazuko: failed to register Unable to handle kernel paging request at virtual address faee68d3 printing eip: c01dd285 *pde = 01886067 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01dd285>] Tainted: P EFLAGS: 00010297 (2.6.4-54.5-default) EIP is at vsnprintf+0x2b5/0x510 eax: faee68d3 ebx: 0000000a ecx: faee68d3 edx: fffffffe esi: f69950bf edi: 00000000 ebp: ffffffff esp: f7a73eec ds: 007b es: 007b ss: 0068 Process grep (pid: 4200, threadinfo=f7a72000 task=f630abf0) Stack: ffffffff ffffffff ffffffff 0966af45 f69950bb c030c100 f698c880 000000bb f6995000 000000fd c01dd4ed f7a73f34 c01dd501 c015cd48 f69950bb c030c0fb 000000fd faee68d3 c0181650 f6995000 00000000 f7a73f7c c018165f c0181650 Call Trace: [<c01dd4ed>] vsprintf+0xd/0x10 [<c01dd501>] sprintf+0x11/0x20 [<c015cd48>] get_chrdev_list+0x38/0x60 [<c0181650>] devices_read_proc+0x0/0x40 [<c018165f>] devices_read_proc+0xf/0x40 [<c0181650>] devices_read_proc+0x0/0x40 [<c017fd31>] proc_file_read+0x161/0x270 [<c017fbd0>] proc_file_read+0x0/0x270 [<c015573e>] vfs_read+0xae/0xf0 [<c015581c>] sys_read+0x2c/0x50 [<c0107dc9>] sysenter_past_esp+0x52/0x79
Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 83 e7 10 89 c3 75 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49304 usecs intel8x0: clocking to 48000 ACPI: AC Adapter [C131] (off-line) ACPI: Battery Slot [C133] (battery present) ACPI: Battery Slot [C132] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C135] ACPI: Lid Switch [C134] ACPI: Fan [C1EE] (off) ACPI: Fan [C1EF] (off) ACPI: Fan [C1F0] (off) ACPI: Fan [C1F1] (off) ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [TZ1] (31 C) ACPI: Thermal Zone [TZ2] (25 C) ACPI: Thermal Zone [TZ3] (22 C) Non-volatile memory driver v1.2 hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 SCSI subsystem initialized st: Version 20040318, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.13 2004-Mar-09, 1 devices found end_request: I/O error, dev fd0, sector 0 lp0: using parport0 (polling). drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic drivers/usb/core/usb.c: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 mtrr: 0x88000000,0x4000000 overlaps existing 0x88000000,0x2000000 Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004a] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0098, PCI irq 11 Socket status: 30000010 cs: memory probe 0xa0000000-0xa0ffffff: clean.
Es möge helfen .... Danke und Grüße Wolfram Helmert