Hi, Tim Oliver Wagner wrote:
hast Du das Paket "wireless-tools-23-119" installiert?
Ja, hab ich. Ich hab sogar schon mal die wireless-howto gelesen ;-), nur viel geholfen hat's bisher nicht.
Nach dem Installieren kannst Du erstmal probieren in den Dateien /etc/pcmcia/... die Sache einzustellen ...
Hab ich, hat nix gnutzt (aber vielleicht war ich auch nur zu bloed)
Ich musste es z.B. in wireless.opts umstellen:
da war ich auch schon mal drin
musst mal schauen, in welchem MAC bereich Deine Karte liegt oder ob sie dort auch aufgelistet ist ...
MAC = Vendor/device-ID? Aufgelistet ist meine Karte nicht in den configs, das waer ja einfach :-) Hier die auszuege aus dmesg usw: aus lspci: 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8180 (rev 20) aus /var/log/messages: Mar 31 11:49:25 monisneueschaos rcpcmcia: /sbin/insmod /lib/modules/2.4.19-4GB/kernel/drivers/pcmcia/pcmcia_core.o Mar 31 11:49:25 monisneueschaos kernel: Linux Kernel Card Services 3.1.22 Mar 31 11:49:25 monisneueschaos kernel: options: [pci] [cardbus] [pm] Mar 31 11:49:26 monisneueschaos rcpcmcia: /sbin/insmod /lib/modules/2.4.19-4GB/kernel/drivers/pcmcia/pcmcia_core.o Mar 31 11:49:26 monisneueschaos rcpcmcia: /sbin/insmod /lib/modules/2.4.19-4GB/kernel/drivers/pcmcia/yenta_socket.o Mar 31 11:49:26 monisneueschaos kernel: PCI: No IRQ known for interrupt pin A of device 01:02.0. Mar 31 11:49:26 monisneueschaos kernel: PCI: No IRQ known for interrupt pin B of device 01:02.1. # da scheint auch schon was faulty? Seit ich pci=biosirq angebe, schafft er mir wenigstens nicht mehr an, das zu versuchen ;-) Mar 31 11:49:26 monisneueschaos kernel: Yenta IRQ list 00b8, PCI irq0 Mar 31 11:49:26 monisneueschaos kernel: Socket status: 30000006 Mar 31 11:49:26 monisneueschaos kernel: Yenta IRQ list 04b8, PCI irq0 Mar 31 11:49:26 monisneueschaos kernel: Socket status: 30000820 Mar 31 11:49:26 monisneueschaos rcpcmcia: /sbin/insmod /lib/modules/2.4.19-4GB/kernel/drivers/pcmcia/pcmcia_core.o Mar 31 11:49:26 monisneueschaos rcpcmcia: /sbin/insmod /lib/modules/2.4.19-4GB/kernel/drivers/pcmcia/ds.o Mar 31 11:49:27 monisneueschaos kernel: cs: cb_alloc(bus 6): vendor 0x10ec, device 0x8180 Mar 31 11:49:27 monisneueschaos kernel: PCI: Failed to allocate resource 0(4000-3fff) for 06:00.0 Mar 31 11:49:27 monisneueschaos kernel: PCI: Failed to allocate resource 1(f4400000-f41fffff) for 06:00.0 Mar 31 11:49:27 monisneueschaos kernel: PCI: Enabling device 06:00.0 (0000 -> 0003) Mar 31 11:49:27 monisneueschaos kernel: PCI: No IRQ known for interrupt pin A of device 06:00.0. Mar 31 11:49:27 monisneueschaos cardmgr[525]: modpath = /lib/modules/2.4.19-4GB/ Mar 31 11:49:27 monisneueschaos cardmgr[525]: modsubdir = pcmcia Mar 31 11:49:27 monisneueschaos cardmgr[525]: error in file 'config' line 1244: unknown device 'rtl8180_rh73.o' # den mach ich noch raus, der wollte auch nicht :-) Mar 31 11:49:27 monisneueschaos cardmgr[525]: watching 2 sockets Mar 31 11:49:27 monisneueschaos kernel: cs: IO port probe 0x0c00-0x0cff: clean. Mar 31 11:49:27 monisneueschaos kernel: cs: IO port probe 0x0820-0x08ff: clean. Mar 31 11:49:27 monisneueschaos kernel: cs: IO port probe 0x0800-0x080f: clean. Mar 31 11:49:27 monisneueschaos kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 Mar 31 11:49:27 monisneueschaos kernel: cs: IO port probe 0x0a00-0x0aff: clean. Mar 31 11:49:28 monisneueschaos cardmgr[556]: starting, version is 3.2.0 Mar 31 11:49:28 monisneueschaos cardmgr[556]: socket 1: CardBus hotplug device Mar 31 11:49:28 monisneueschaos insmod: Using /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o Mar 31 11:49:28 monisneueschaos insmod: Symbol version prefix '' Mar 31 11:49:28 monisneueschaos insmod: /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o: kernel-module version mismatch /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o was compiled for kernel version 2.4.18-3custom while this kernel is version 2.4.19-4GB. Mar 31 11:49:28 monisneueschaos insmod: /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o: insmod /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o failed Mar 31 11:49:28 monisneueschaos insmod: /lib/modules/2.4.19- 4GB/kernel/drivers/net/pcmcia/rtl8180_24x.o: insmod rtl8180_24x failed Mar 31 11:49:28 monisneueschaos /etc/hotplug/pci.agent[531]: ... can't load module rtl8180_24x Mar 31 11:49:28 monisneueschaos /etc/hotplug/pci.agent[531]: missing kernel or user mode driver rtl8180_24x Mar 31 11:49:28 monisneueschaos /etc/hotplug/pci.agent[531]: writing pcmcia-1 to /var/run/hotplug/net Mar 31 11:49:31 monisneueschaos kernel: PCI: Found IRQ 9 for device 00:1f.5 Mar 31 11:49:31 monisneueschaos kernel: PCI: Sharing IRQ 9 with 00:1f.3 Mar 31 11:49:31 monisneueschaos kernel: PCI: Sharing IRQ 9 with 00:1f.6 Mar 31 11:49:31 monisneueschaos kernel: PCI: Setting latency timer of device 00:1f.5 to 64 Mar 31 11:49:31 monisneueschaos kernel: IPv6 v0.8 for NET4.0 Mar 31 11:49:31 monisneueschaos kernel: IPv6 over IPv4 tunneling driver Mar 31 11:49:31 monisneueschaos sshd[611]: Server listening on :: port 22. Mar 31 11:49:32 monisneueschaos /etc/hotplug/net.agent[620]: Using HW description sit-pcmcia-1 Mar 31 11:49:32 monisneueschaos /etc/hotplug/net.agent[620]: ifup: No configuration found for sit-pcmcia-1 sit0 Mar 31 11:49:32 monisneueschaos ifup: No configuration found for sit-pcmcia-1 sit0 Mar 31 11:49:32 monisneueschaos kernel: ALSA ac97_codec.c:1517: AC'97 1:0 does not respond - RESET [REC_GAIN = 0x0] Mar 31 11:49:33 monisneueschaos kernel: ALSA ac97_codec.c:1554: AC'97 1:0 analog subsections not ready Mar 31 11:49:33 monisneueschaos kernel: intel8x0: clocking to 48000 Mar 31 11:49:39 monisneueschaos smpppd[681]: smpppd version 0.78 started Mar 31 11:49:44 monisneueschaos /usr/sbin/cron[913]: (CRON) STARTUP (fork ok) Mar 31 11:49:47 monisneueschaos kernel: isapnp: Scanning for PnP cards... Mar 31 11:49:47 monisneueschaos kernel: isapnp: No Plug & Play device found Mar 31 11:49:48 monisneueschaos kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Mar 31 11:49:48 monisneueschaos kernel: cdrom: open failed. Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 64 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 66 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 68 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 70 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 72 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 74 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 76 Mar 31 11:49:48 monisneueschaos kernel: ide-scsi: hdc: unsupported command in request queue (0) Mar 31 11:49:48 monisneueschaos kernel: end_request: I/O error, dev 16:00 (hdc), sector 78 Mar 31 11:49:52 monisneueschaos kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Mar 31 11:49:52 monisneueschaos kernel: agpgart: Maximum main memory to use for agp memory: 93M Mar 31 11:49:52 monisneueschaos kernel: agpgart: agpgart: Detected an Intel i815 Chipset. Mar 31 11:49:52 monisneueschaos kernel: agpgart: detected 4MB dedicated video ram. dmesg bringt folgendes: Linux version 2.4.19-4GB (root@Pentium.suse.de) (gcc version 3.2) #1 Fri Sep 13 13:14:56 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007cf0000 (usable) BIOS-e820: 0000000007cf0000 - 0000000007cff000 (ACPI data) BIOS-e820: 0000000007cff000 - 0000000007d00000 (ACPI NVS) BIOS-e820: 0000000007d00000 - 0000000007e80000 (usable) BIOS-e820: 0000000007e80000 - 0000000008000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature 126MB LOWMEM available. ACPI: have wakeup address 0xc0001000 Advanced speculative caching feature not present On node 0 totalpages: 32384 zone(0): 4096 pages. zone(1): 28288 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f7110 ACPI: RSDT (v001 SONY U0 08194.00774) @ 0x07cfa757 ACPI: FADT (v001 SONY U0 08194.00774) @ 0x07cfef64 ACPI: BOOT (v001 SONY U0 08194.00774) @ 0x07cfefd8 ACPI: MADT not present Sony Vaio laptop detected. Building zonelist for node : 0 Kernel command line: root=/dev/hda3 cdromdevice=hdc hdc=ide- scsi pci=biosirq ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 794.935 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1585.97 BogoMIPS Memory: 124652k/129536k available (1553k kernel code, 4428k reserved, 416k data, 152k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20020829 PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Unknown bridge resource 2: assuming transparent ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Link [LNKA] (IRQs *9) ACPI: PCI Interrupt Link [LNKB] (IRQs *9) ACPI: PCI Interrupt Link [LNKC] (IRQs 9, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 9, disabled) ACPI: PCI Interrupt Link [LNKE] (IRQs *9) ACPI: PCI Interrupt Link [LNKH] (IRQs *9) PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. mxt_scan_bios: enter Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 8096 aio_setup: sizeof(struct page) = 48 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 9 for device 00:1f.6 PCI: Sharing IRQ 9 with 00:1f.3 PCI: Sharing IRQ 9 with 00:1f.5 Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2M: IDE controller on PCI bus 00 dev f9 ICH2M: chipset revision 3 ICH2M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-20, ATA DISK drive hdc: UJDA710, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c037be64, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 216k freed VFS: Mounted root (ext2 filesystem). hdc: no flushcache support scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA710 Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 sd_attach() reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3)) reiserfs: using ordered data mode Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 152k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5(mp-v6)(15/07/2002) module loaded Adding Swap: 409648k swap-space (priority 42) reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (ide0(3,7)) for (ide0(3,7)) reiserfs: using ordered data mode Using r5 hash to sort names reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6)) reiserfs: using ordered data mode Using r5 hash to sort names reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (ide0(3,8)) for (ide0(3,8)) reiserfs: using ordered data mode Using r5 hash to sort names Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] ds: no socket drivers loaded! unloading Kernel Card Services Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] ds: no socket drivers loaded! unloading Kernel Card Services usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 13:53:01 Sep 13 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:1f.2 IRQ routing conflict for 00:1f.2, have irq 9, want irq 10 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21 sg: ... found 15:00 sg_attach: dev0=(21:0) Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 01:02.0. PCI: No IRQ known for interrupt pin B of device 01:02.1. Yenta IRQ list 00b8, PCI irq0 Socket status: 30000006 Yenta IRQ list 04b8, PCI irq0 Socket status: 30000820 cs: cb_alloc(bus 6): vendor 0x10ec, device 0x8180 PCI: Failed to allocate resource 0(4000-3fff) for 06:00.0 PCI: Failed to allocate resource 1(f4400000-f41fffff) for 06:00.0 PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: No IRQ known for interrupt pin A of device 06:00.0. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0- 0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. PCI: Found IRQ 9 for device 00:1f.5 PCI: Sharing IRQ 9 with 00:1f.3 PCI: Sharing IRQ 9 with 00:1f.6 PCI: Setting latency timer of device 00:1f.5 to 64 IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ALSA ac97_codec.c:1517: AC'97 1:0 does not respond - RESET [REC_GAIN = 0x0] ALSA ac97_codec.c:1554: AC'97 1:0 analog subsections not ready intel8x0: clocking to 48000 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found sr0: CDROM (ioctl) reports ILLEGAL REQUEST. cdrom: open failed. ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 64 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 66 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 68 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 70 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 72 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 74 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 76 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 78 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 93M agpgart: agpgart: Detected an Intel i815 Chipset. agpgart: detected 4MB dedicated video ram. agpgart: AGP aperture is 64M @ 0xf8000000 memory : c184a3a0 memory : c3d38520 memory : c3d384e0 Linux video capture interface: v1.00 Mar 31 11:49:52 monisneueschaos kernel: agpgart: AGP aperture is 64M @ 0xf8000000 Mar 31 11:49:52 monisneueschaos kernel: memory : c184a3a0 Mar 31 11:49:52 monisneueschaos kernel: memory : c3d38520 Mar 31 11:49:52 monisneueschaos kernel: memory : c3d384e0 Mar 31 11:49:52 monisneueschaos kernel: Linux video capture interface: v1.00 Mar 31 11:50:09 monisneueschaos kdm[1013]: pam_unix2: session started for user moncis, service xdm tx Monika Cisch