r2708 - in /limal-branches/mc-devel/limal-ca-mgm: ./ doc/autodocs/ src/ src/INIParser/ src/ca-mgm/ src/limal/ swig/ swig/perl5/ swig/ruby/ testsuite/ testsuite/TestRepos/Test_CA1/ testsuite/TestRep...
Author: mcalmer
Date: Sat Aug 28 18:48:58 2010
New Revision: 2708
URL: http://svn.opensuse.org/viewcvs/limal?rev=2708&view=rev
Log:
move headers to ca-mgm/ directory
Added:
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/AuthorityInfoAccessExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/AuthorityInfoAccessExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/AuthorityKeyIdentifierExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/AuthorityKeyIdentifierExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/AuthorityKeyIdentifierGenerateExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/AuthorityKeyIdentifierGenerateExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/BasicConstraintsExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/BasicConstraintsExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/BitExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/BitExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ByteBuffer.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ByteBuffer.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CA.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CA.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CAConfig.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CAConfig.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CRLData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CRLData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CRLDistributionPointsExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CRLDistributionPointsExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CRLGenerationData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CRLGenerationData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CRLReason.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CRLReason.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CallbackBase.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/CallbackBase.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CertificateData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CertificateData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CertificateIssueData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CertificateIssueData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CertificatePoliciesExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CertificatePoliciesExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/CommonData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/CommonData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/DNObject.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/DNObject.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/Date.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/Date.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/Exception.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/Exception.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ExtendedKeyUsageExt.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/ExtendedKeyUsageExt.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ExtensionBase.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/ExtensionBase.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ExternalDataSource.hpp
- copied unchanged from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ExternalDataSource.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ExternalProgram.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ExternalProgram.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/IssuerAlternativeNameExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/IssuerAlternativeNameExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/LiteralValues.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/LiteralValues.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/LocalManagement.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/LocalManagement.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/LogControl.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/LogControl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/Logger.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/Logger.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/Makefile.am
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/Makefile.am
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PathInfo.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PathInfo.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PathName.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PathName.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PathUtils.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PathUtils.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PerlRegEx.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PerlRegEx.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PosixRegEx.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PosixRegEx.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/PtrTypes.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/PtrTypes.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ReferenceCounted.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ReferenceCounted.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/RequestData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/RequestData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/RequestGenerationData.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/RequestGenerationData.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/String.hpp
- copied unchanged from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/String.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/StringExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/StringExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/SubjectAlternativeNameExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/SubjectAlternativeNameExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/SubjectKeyIdentifierExtension.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/SubjectKeyIdentifierExtension.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/Url.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/Url.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/UrlBase.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/UrlBase.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/UrlUtils.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/UrlUtils.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ValueCheck.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ValueCheck.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ValueIntCheck.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ValueIntCheck.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ValuePerlRECheck.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ValuePerlRECheck.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ValuePosixRECheck.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ValuePosixRECheck.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/ValueRegExCheck.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ValueRegExCheck.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/X509v3CRLExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/X509v3CRLExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/X509v3CRLGenerationExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/X509v3CRLGenerationExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/X509v3CertificateExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/X509v3CertificateExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/X509v3CertificateIssueExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/X509v3CertificateIssueExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/X509v3RequestExtensions.hpp
- copied, changed from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/X509v3RequestExtensions.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ca-mgm/config.h.in
- copied unchanged from r2705, limal-branches/mc-devel/limal-ca-mgm/src/limal/ca-mgm/config.h.in
Removed:
limal-branches/mc-devel/limal-ca-mgm/src/limal/
Modified:
limal-branches/mc-devel/limal-ca-mgm/configure.in
limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/Makefile.am
limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/doxygen.conf
limal-branches/mc-devel/limal-ca-mgm/src/AuthorityInfoAccessExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/AuthorityKeyIdentifierExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/AuthorityKeyIdentifierExtension_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/AuthorityKeyIdentifierGenerateExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/BasicConstraintsExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/BitExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ByteBuffer.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CA.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CAConfig.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLDataImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLData_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLData_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLDistributionPointsExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLGenerationData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLReason.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLReason_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CRLReason_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificateData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificateDataImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificateData_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificateData_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificateIssueData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/CertificatePoliciesExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Commands.hpp.in
limal-branches/mc-devel/limal-ca-mgm/src/DNObject.cpp
limal-branches/mc-devel/limal-ca-mgm/src/DNObjectImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/DNObject_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/DNObject_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/Date.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Exception.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ExtendedKeyUsageExt.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ExtensionBase.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ExternalDataSource.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ExternalProgram.cpp
limal-branches/mc-devel/limal-ca-mgm/src/INIParser/INIParser.cpp
limal-branches/mc-devel/limal-ca-mgm/src/INIParser/INIParser.hpp
limal-branches/mc-devel/limal-ca-mgm/src/INIParser/INIParserDescr.hpp
limal-branches/mc-devel/limal-ca-mgm/src/INIParser/IniFile.h
limal-branches/mc-devel/limal-ca-mgm/src/INIParser/IniParser.h
limal-branches/mc-devel/limal-ca-mgm/src/IssuerAlternativeNameExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/LDAPUrlImpl.cpp
limal-branches/mc-devel/limal-ca-mgm/src/LDAPUrlImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/LiteralValues.cpp
limal-branches/mc-devel/limal-ca-mgm/src/LiteralValues_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/LocalManagement.cpp
limal-branches/mc-devel/limal-ca-mgm/src/LogControl.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Makefile.am
limal-branches/mc-devel/limal-ca-mgm/src/OpenSSLUtils.cpp
limal-branches/mc-devel/limal-ca-mgm/src/OpenSSLUtils.hpp
limal-branches/mc-devel/limal-ca-mgm/src/PathInfo.cpp
limal-branches/mc-devel/limal-ca-mgm/src/PathName.cpp
limal-branches/mc-devel/limal-ca-mgm/src/PathUtils.cpp
limal-branches/mc-devel/limal-ca-mgm/src/PerlRegEx.cpp
limal-branches/mc-devel/limal-ca-mgm/src/PosixRegEx.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ReferenceCounted.cpp
limal-branches/mc-devel/limal-ca-mgm/src/RequestData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/RequestDataImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/RequestData_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/RequestData_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/RequestGenerationData.cpp
limal-branches/mc-devel/limal-ca-mgm/src/String.cpp
limal-branches/mc-devel/limal-ca-mgm/src/StringExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/SubjectAlternativeNameExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/SubjectKeyIdentifierExtension.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Url.cpp
limal-branches/mc-devel/limal-ca-mgm/src/UrlBase.cpp
limal-branches/mc-devel/limal-ca-mgm/src/UrlByScheme.hpp
limal-branches/mc-devel/limal-ca-mgm/src/UrlUtils.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Utils.cpp
limal-branches/mc-devel/limal-ca-mgm/src/Utils.hpp
limal-branches/mc-devel/limal-ca-mgm/src/ValueCheck.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ValueIntCheck.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ValuePerlRECheck.cpp
limal-branches/mc-devel/limal-ca-mgm/src/ValuePosixRECheck.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CRLExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CRLExtensionsImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CRLExtensions_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CRLExtensions_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CRLGenerationExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CertificateExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CertificateExtensionsImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CertificateExtensions_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CertificateExtensions_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3CertificateIssueExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3RequestExtensions.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3RequestExtensionsImpl.hpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3RequestExtensions_Priv.cpp
limal-branches/mc-devel/limal-ca-mgm/src/X509v3RequestExtensions_Priv.hpp
limal-branches/mc-devel/limal-ca-mgm/src/config.cpp
limal-branches/mc-devel/limal-ca-mgm/swig/CaMgm.i
limal-branches/mc-devel/limal-ca-mgm/swig/perl5/Makefile.am
limal-branches/mc-devel/limal-ca-mgm/swig/ruby/Makefile.am
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA1.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA2.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA3.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA4.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA5.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA6.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA7.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA8.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CA9.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CAConfig.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CRLTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest2.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest3.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest4.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest5.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/CertificateTest6.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ConvertTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/DeleteCATest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ExportTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/IPv6CheckTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ImportCATest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ImportCommonCertificateTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ImportRequestTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ListCATreeTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ListTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ParseCATest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ParseCRLTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ParseCertificateTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ParseCertificateTest2.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/ParseRequestTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RemoveCertificateTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RemoveRequestTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RequestTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RevokeTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RevokeTest2.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RevokeTest3.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RevokeTest4.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/RevokeTest5.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/SubCATest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestLineFormater.hpp
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestLineFormater2.hpp
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestRepos/Test_CA1/cam.txt
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestRepos/Test_CA1/index.txt
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestRepos/Test_CA1/serial
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestRepos/Test_CA2/.rand
limal-branches/mc-devel/limal-ca-mgm/testsuite/TestRepos/Test_CA2/crl/crl.pem
limal-branches/mc-devel/limal-ca-mgm/testsuite/UpdateDBTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/VerifyTest.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/iniParser.cc
limal-branches/mc-devel/limal-ca-mgm/testsuite/sysConfig.cc
limal-branches/mc-devel/limal-ca-mgm/typemaps/perl5/camgm_CommonTypes.i
limal-branches/mc-devel/limal-ca-mgm/typemaps/perl5/camgm_exceptions.i
Modified: limal-branches/mc-devel/limal-ca-mgm/configure.in
URL: http://svn.opensuse.org/viewcvs/limal/limal-branches/mc-devel/limal-ca-mgm/configure.in?rev=2708&r1=2707&r2=2708&view=diff
==============================================================================
--- limal-branches/mc-devel/limal-ca-mgm/configure.in (original)
+++ limal-branches/mc-devel/limal-ca-mgm/configure.in Sat Aug 28 18:48:58 2010
@@ -28,7 +28,7 @@
camgmbindir=\${bindir}
camgmlibdir=\${libdir}/
camgmdatadir=\${prefix}/share/$RPMNAME
-camgmincludedir=\${includedir}/
+camgmincludedir=\${includedir}/ca-mgm
dnl pkgconfig honors lib64
pkgconfigdir=\${libdir}/pkgconfig
@@ -311,9 +311,8 @@
AC_CONFIG_FILES(src/Commands.hpp)
-AC_CONFIG_FILES(Makefile src/limal/ca-mgm/Makefile
-src/limal/ca-mgm/config.h
-src/limal/Makefile
+AC_CONFIG_FILES(Makefile src/ca-mgm/Makefile
+src/ca-mgm/config.h
src/Makefile
swig/perl5/Makefile
swig/ruby/Makefile
Modified: limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/Makefile.am
URL: http://svn.opensuse.org/viewcvs/limal/limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/Makefile.am?rev=2708&r1=2707&r2=2708&view=diff
==============================================================================
--- limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/Makefile.am (original)
+++ limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/Makefile.am Sat Aug 28 18:48:58 2010
@@ -10,7 +10,7 @@
doxygen.css @RPMNAME@.tag: index.html
-headers = $(wildcard $(srcdir)/../../src/limal/*.hpp $(srcdir)/../../src/limal/ca-mgm/*.hpp)
+headers = $(wildcard $(srcdir)/../../src/ca-mgm/*.hpp)
index.html: $(headers) $(srcdir)/../../doc/examples/*.cpp doxygen.conf
@DOXYGEN_COMMAND@ doxygen.conf
Modified: limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/doxygen.conf
URL: http://svn.opensuse.org/viewcvs/limal/limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/doxygen.conf?rev=2708&r1=2707&r2=2708&view=diff
==============================================================================
--- limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/doxygen.conf (original)
+++ limal-branches/mc-devel/limal-ca-mgm/doc/autodocs/doxygen.conf Sat Aug 28 18:48:58 2010
@@ -14,276 +14,276 @@
# Project related configuration options
#---------------------------------------------------------------------------
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
PROJECT_NAME = libcamgm
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER =
+PROJECT_NUMBER =
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
-OUTPUT_DIRECTORY =
+OUTPUT_DIRECTORY =
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
# otherwise cause performance problems for the file system.
CREATE_SUBDIRS = NO
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
OUTPUT_LANGUAGE = English
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
# Set to NO to disable this.
BRIEF_MEMBER_DESC = YES
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
-ABBREVIATE_BRIEF =
+ABBREVIATE_BRIEF =
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
# description.
ALWAYS_DETAILED_SEC = NO
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
# path to strip.
-STRIP_FROM_PATH =
+STRIP_FROM_PATH =
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
-STRIP_FROM_INC_PATH =
+STRIP_FROM_INC_PATH =
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
# (thus requiring an explicit @brief command for a brief description.)
JAVADOC_AUTOBRIEF = NO
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
# an explicit \brief command for a brief description.)
QT_AUTOBRIEF = NO
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
MULTILINE_CPP_IS_BRIEF = NO
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
# re-implements.
INHERIT_DOCS = YES
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
# be part of the file/class/namespace that contains it.
SEPARATE_MEMBER_PAGES = NO
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
-ALIASES =
+ALIASES =
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
# scopes will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
# Fortran.
OPTIMIZE_FOR_FORTRAN = NO
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
# VHDL.
OPTIMIZE_OUTPUT_VHDL = NO
-# Doxygen selects the parser to use depending on the extension of the files it parses.
-# With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this tag.
-# The format is ext=language, where ext is a file extension, and language is one of
-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-EXTENSION_MAPPING =
+EXTENSION_MAPPING =
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
CPP_CLI_SUPPORT = NO
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
# instead of private inheritance when no explicit protection keyword is present.
SIP_SUPPORT = NO
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen to replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = YES
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command.
SUBGROUPING = YES
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penality.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will rougly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols
SYMBOL_CACHE_SIZE = 0
@@ -292,265 +292,265 @@
# Build related configuration options
#---------------------------------------------------------------------------
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.
EXTRACT_PRIVATE = YES
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation.
EXTRACT_STATIC = YES
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
# If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
# anonymous namespace are hidden.
EXTRACT_ANON_NSPACES = NO
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = NO
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = NO
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
# documentation.
HIDE_FRIEND_COMPOUNDS = NO
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
# and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
# of that file.
SHOW_INCLUDE_FILES = YES
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members.
INLINE_INFO = YES
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
# declaration order.
SORT_MEMBER_DOCS = YES
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
# the group names will appear in their defined order.
SORT_GROUP_NAMES = NO
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.
GENERATE_TODOLIST = YES
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
# commands in the documentation.
GENERATE_TESTLIST = YES
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.
GENERATE_BUGLIST = YES
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES
-# The ENABLED_SECTIONS tag can be used to enable conditional
+# The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif.
-ENABLED_SECTIONS =
+ENABLED_SECTIONS =
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
SHOW_FILES = YES
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
# and from the Folder Tree View (if specified). The default is YES.
SHOW_NAMESPACES = YES
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
-FILE_VERSION_FILTER =
+FILE_VERSION_FILTER =
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
-# doxygen. The layout file controls the global structure of the generated output files
-# in an output format independent way. The create the layout file that represents
-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
-# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
# of the layout file.
-LAYOUT_FILE =
+LAYOUT_FILE =
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------
-# The QUIET tag can be used to turn on/off the messages that are generated
+# The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = YES
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
WARNINGS = YES
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.
WARN_IF_UNDOCUMENTED = YES
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text "
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
# to stderr.
WARN_LOGFILE = doxygen.log
@@ -559,168 +559,168 @@
# configuration options related to the input files
#---------------------------------------------------------------------------
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = ./../../src/limal/ByteBuffer.hpp \
- ./../../src/limal/CallbackBase.hpp \
- ./../../src/limal/Date.hpp \
- ./../../src/limal/Exception.hpp \
- ./../../src/limal/ExternalDataSource.hpp \
- ./../../src/limal/ExternalProgram.hpp \
- ./../../src/limal/LogControl.hpp \
- ./../../src/limal/Logger.hpp \
- ./../../src/limal/PathInfo.hpp \
- ./../../src/limal/PathName.hpp \
- ./../../src/limal/PathUtils.hpp \
- ./../../src/limal/PerlRegEx.hpp \
- ./../../src/limal/PosixRegEx.hpp \
- ./../../src/limal/PtrTypes.hpp \
- ./../../src/limal/ReferenceCounted.hpp \
- ./../../src/limal/String.hpp \
- ./../../src/limal/UrlBase.hpp \
- ./../../src/limal/Url.hpp \
- ./../../src/limal/UrlUtils.hpp \
- ./../../src/limal/ValueCheck.hpp \
- ./../../src/limal/ValueIntCheck.hpp \
- ./../../src/limal/ValuePerlRECheck.hpp \
- ./../../src/limal/ValuePosixRECheck.hpp \
- ./../../src/limal/ValueRegExCheck.hpp \
- ./../../src/limal/ca-mgm/AuthorityInfoAccessExtension.hpp \
- ./../../src/limal/ca-mgm/AuthorityKeyIdentifierExtension.hpp \
- ./../../src/limal/ca-mgm/AuthorityKeyIdentifierGenerateExtension.hpp \
- ./../../src/limal/ca-mgm/BasicConstraintsExtension.hpp \
- ./../../src/limal/ca-mgm/BitExtensions.hpp \
- ./../../src/limal/ca-mgm/CAConfig.hpp \
- ./../../src/limal/ca-mgm/CA.hpp \
- ./../../src/limal/ca-mgm/CertificateData.hpp \
- ./../../src/limal/ca-mgm/CertificateIssueData.hpp \
- ./../../src/limal/ca-mgm/CertificatePoliciesExtension.hpp \
- ./../../src/limal/ca-mgm/CommonData.hpp \
- ./../../src/limal/ca-mgm/CRLData.hpp \
- ./../../src/limal/ca-mgm/CRLDistributionPointsExtension.hpp \
- ./../../src/limal/ca-mgm/CRLGenerationData.hpp \
- ./../../src/limal/ca-mgm/CRLReason.hpp \
- ./../../src/limal/ca-mgm/DNObject.hpp \
- ./../../src/limal/ca-mgm/ExtendedKeyUsageExt.hpp \
- ./../../src/limal/ca-mgm/ExtensionBase.hpp \
- ./../../src/limal/ca-mgm/IssuerAlternativeNameExtension.hpp \
- ./../../src/limal/ca-mgm/LiteralValues.hpp \
- ./../../src/limal/ca-mgm/LocalManagement.hpp \
- ./../../src/limal/ca-mgm/RequestData.hpp \
- ./../../src/limal/ca-mgm/RequestGenerationData.hpp \
- ./../../src/limal/ca-mgm/StringExtensions.hpp \
- ./../../src/limal/ca-mgm/SubjectAlternativeNameExtension.hpp \
- ./../../src/limal/ca-mgm/SubjectKeyIdentifierExtension.hpp \
- ./../../src/limal/ca-mgm/X509v3CertificateExtensions.hpp \
- ./../../src/limal/ca-mgm/X509v3CertificateIssueExtensions.hpp \
- ./../../src/limal/ca-mgm/X509v3CRLExtensions.hpp \
- ./../../src/limal/ca-mgm/X509v3CRLGenerationExtensions.hpp \
- ./../../src/limal/ca-mgm/X509v3RequestExtensions.hpp
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+INPUT = ./../../src/ca-mgm/ByteBuffer.hpp \
+ ./../../src/ca-mgm/CallbackBase.hpp \
+ ./../../src/ca-mgm/Date.hpp \
+ ./../../src/ca-mgm/Exception.hpp \
+ ./../../src/ca-mgm/ExternalDataSource.hpp \
+ ./../../src/ca-mgm/ExternalProgram.hpp \
+ ./../../src/ca-mgm/LogControl.hpp \
+ ./../../src/ca-mgm/Logger.hpp \
+ ./../../src/ca-mgm/PathInfo.hpp \
+ ./../../src/ca-mgm/PathName.hpp \
+ ./../../src/ca-mgm/PathUtils.hpp \
+ ./../../src/ca-mgm/PerlRegEx.hpp \
+ ./../../src/ca-mgm/PosixRegEx.hpp \
+ ./../../src/ca-mgm/PtrTypes.hpp \
+ ./../../src/ca-mgm/ReferenceCounted.hpp \
+ ./../../src/ca-mgm/String.hpp \
+ ./../../src/ca-mgm/UrlBase.hpp \
+ ./../../src/ca-mgm/Url.hpp \
+ ./../../src/ca-mgm/UrlUtils.hpp \
+ ./../../src/ca-mgm/ValueCheck.hpp \
+ ./../../src/ca-mgm/ValueIntCheck.hpp \
+ ./../../src/ca-mgm/ValuePerlRECheck.hpp \
+ ./../../src/ca-mgm/ValuePosixRECheck.hpp \
+ ./../../src/ca-mgm/ValueRegExCheck.hpp \
+ ./../../src/ca-mgm/AuthorityInfoAccessExtension.hpp \
+ ./../../src/ca-mgm/AuthorityKeyIdentifierExtension.hpp \
+ ./../../src/ca-mgm/AuthorityKeyIdentifierGenerateExtension.hpp \
+ ./../../src/ca-mgm/BasicConstraintsExtension.hpp \
+ ./../../src/ca-mgm/BitExtensions.hpp \
+ ./../../src/ca-mgm/CAConfig.hpp \
+ ./../../src/ca-mgm/CA.hpp \
+ ./../../src/ca-mgm/CertificateData.hpp \
+ ./../../src/ca-mgm/CertificateIssueData.hpp \
+ ./../../src/ca-mgm/CertificatePoliciesExtension.hpp \
+ ./../../src/ca-mgm/CommonData.hpp \
+ ./../../src/ca-mgm/CRLData.hpp \
+ ./../../src/ca-mgm/CRLDistributionPointsExtension.hpp \
+ ./../../src/ca-mgm/CRLGenerationData.hpp \
+ ./../../src/ca-mgm/CRLReason.hpp \
+ ./../../src/ca-mgm/DNObject.hpp \
+ ./../../src/ca-mgm/ExtendedKeyUsageExt.hpp \
+ ./../../src/ca-mgm/ExtensionBase.hpp \
+ ./../../src/ca-mgm/IssuerAlternativeNameExtension.hpp \
+ ./../../src/ca-mgm/LiteralValues.hpp \
+ ./../../src/ca-mgm/LocalManagement.hpp \
+ ./../../src/ca-mgm/RequestData.hpp \
+ ./../../src/ca-mgm/RequestGenerationData.hpp \
+ ./../../src/ca-mgm/StringExtensions.hpp \
+ ./../../src/ca-mgm/SubjectAlternativeNameExtension.hpp \
+ ./../../src/ca-mgm/SubjectKeyIdentifierExtension.hpp \
+ ./../../src/ca-mgm/X509v3CertificateExtensions.hpp \
+ ./../../src/ca-mgm/X509v3CertificateIssueExtensions.hpp \
+ ./../../src/ca-mgm/X509v3CRLExtensions.hpp \
+ ./../../src/ca-mgm/X509v3CRLGenerationExtensions.hpp \
+ ./../../src/ca-mgm/X509v3RequestExtensions.hpp
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# the list of possible encodings.
INPUT_ENCODING = UTF-8
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
-FILE_PATTERNS =
+FILE_PATTERNS =
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.
RECURSIVE = YES
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
-EXCLUDE =
+EXCLUDE =
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = YES
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
-EXCLUDE_PATTERNS =
+EXCLUDE_PATTERNS =
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
-EXCLUDE_SYMBOLS =
+EXCLUDE_SYMBOLS =
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
# the \include command).
EXAMPLE_PATH = ./../../doc/examples/
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.
-EXAMPLE_PATTERNS =
+EXAMPLE_PATTERNS =
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
# the \image command).
-IMAGE_PATH =
+IMAGE_PATH =
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
# ignored.
-INPUT_FILTER =
+INPUT_FILTER =
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
# is applied to all files.
-FILTER_PATTERNS =
+FILTER_PATTERNS =
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO
@@ -729,54 +729,54 @@
# configuration options related to source browsing
#---------------------------------------------------------------------------
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = NO
-# Setting the INLINE_SOURCES tag to YES will include the body
+# Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation.
INLINE_SOURCES = NO
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
# functions referencing it will be listed.
REFERENCED_BY_RELATION = YES
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
# called/used by that function will be listed.
REFERENCES_RELATION = YES
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
# Otherwise they will link to the documentation.
REFERENCES_LINK_SOURCE = YES
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES
@@ -785,243 +785,243 @@
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 2
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers.
-IGNORE_PREFIX =
+IGNORE_PREFIX =
#---------------------------------------------------------------------------
# configuration options related to the HTML output
#---------------------------------------------------------------------------
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output.
GENERATE_HTML = YES
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = .
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
# standard header.
-HTML_HEADER =
+HTML_HEADER =
-# If the HTML_FOOTER_DESCRIPTION tag is set to YES, Doxygen will
+# If the HTML_FOOTER_DESCRIPTION tag is set to YES, Doxygen will
# add generated date, project name and doxygen version to HTML footer.
HTML_FOOTER_DESCRIPTION= NO
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER =
+HTML_FOOTER =
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
-HTML_STYLESHEET =
+HTML_STYLESHEET =
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
HTML_DYNAMIC_SECTIONS = NO
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
GENERATE_DOCSET = NO
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
# can be grouped.
DOCSET_FEEDNAME = "Doxygen generated docs"
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name.
DOCSET_BUNDLE_ID = org.doxygen.Project
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation.
GENERATE_HTMLHELP = NO
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
# written to the html output directory.
-CHM_FILE =
+CHM_FILE =
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp.
-HHC_LOCATION =
+HHC_LOCATION =
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO).
GENERATE_CHI = NO
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
# content.
-CHM_INDEX_ENCODING =
+CHM_INDEX_ENCODING =
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file.
BINARY_TOC = NO
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
-# are set, an additional index file will be generated that can be used as input for
-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
# HTML documentation.
GENERATE_QHP = NO
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder.
-QCH_FILE =
+QCH_FILE =
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#namespace
-QHP_NAMESPACE =
+QHP_NAMESPACE =
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
-# For more information please see
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
# http://doc.trolltech.com/qthelpproject.html#custom-filters
-QHP_CUST_FILTER_NAME =
+QHP_CUST_FILTER_NAME =
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
-QHP_CUST_FILTER_ATTRS =
+QHP_CUST_FILTER_ATTRS =
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
-# filter section matches.
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
-QHP_SECT_FILTER_ATTRS =
+QHP_SECT_FILTER_ATTRS =
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file.
-QHG_LOCATION =
+QHG_LOCATION =
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.
DISABLE_INDEX = NO
-# This tag can be used to set the number of enum values (range [1..20])
+# This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to FRAME, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature. Other possible values
-# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list;
-# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
-# disables this behavior completely. For backwards compatibility with previous
-# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to FRAME, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature. Other possible values
+# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list;
+# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
+# disables this behavior completely. For backwards compatibility with previous
+# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
# respectively.
GENERATE_TREEVIEW = NO
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
TREEVIEW_WIDTH = 250
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated.
FORMULA_FONTSIZE = 10
@@ -1030,74 +1030,74 @@
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
GENERATE_LATEX = NO
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name.
LATEX_CMD_NAME = latex
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name.
MAKEINDEX_CMD_NAME = makeindex
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_LATEX = NO
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output.
-EXTRA_PACKAGES =
+EXTRA_PACKAGES =
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing!
-LATEX_HEADER =
+LATEX_HEADER =
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation.
USE_PDFLATEX = NO
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
# in the output.
LATEX_HIDE_INDICES = NO
@@ -1110,68 +1110,68 @@
# configuration options related to the RTF output
#---------------------------------------------------------------------------
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors.
GENERATE_RTF = NO
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_RTF = NO
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
# Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
-RTF_STYLESHEET_FILE =
+RTF_STYLESHEET_FILE =
-# Set optional variables used in the generation of an rtf document.
+# Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file.
-RTF_EXTENSIONS_FILE =
+RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages
GENERATE_MAN = NO
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man
-# The MAN_EXTENSION tag determines the extension that is added to
+# The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO.
MAN_LINKS = NO
@@ -1180,33 +1180,33 @@
# configuration options related to the XML output
#---------------------------------------------------------------------------
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
# the code including all documentation.
GENERATE_XML = NO
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
# syntax of the XML files.
-XML_SCHEMA =
+XML_SCHEMA =
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
# syntax of the XML files.
-XML_DTD =
+XML_DTD =
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
@@ -1215,10 +1215,10 @@
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
# and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO
@@ -1227,339 +1227,339 @@
# configuration options related to the Perl module output
#---------------------------------------------------------------------------
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
# moment.
GENERATE_PERLMOD = NO
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same.
PERLMOD_PRETTY = YES
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables.
-PERLMOD_MAKEVAR_PREFIX =
+PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
+# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
# files.
ENABLE_PREPROCESSING = YES
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = YES
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
# the preprocessor.
INCLUDE_PATH = /usr/include
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used.
-INCLUDE_FILE_PATTERNS =
+INCLUDE_FILE_PATTERNS =
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
PREDEFINED = LIMAL_NAMESPACE=ca_mgm \
CA_MGM_NAMESPACE=ca_mgm
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition.
-EXPAND_AS_DEFINED =
+EXPAND_AS_DEFINED =
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
# the parser if not removed.
SKIP_FUNCTION_MACROS = YES
#---------------------------------------------------------------------------
-# Configuration::additions related to external references
+# Configuration::additions related to external references
#---------------------------------------------------------------------------
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here.
-TAGFILES =
+TAGFILES =
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
GENERATE_TAGFILE = libcamgm.tag
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
# will be listed.
ALLEXTERNALS = NO
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
# be listed.
EXTERNAL_GROUPS = YES
-# The PERL_PATH should be the absolute path and name of the perl script
+# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl
#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to the dot tool
#---------------------------------------------------------------------------
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
# powerful graphs.
CLASS_DIAGRAMS = YES
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
-MSCGEN_PATH =
+MSCGEN_PATH =
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
# or is not a class.
HIDE_UNDOC_RELATIONS = YES
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)
HAVE_DOT = NO
-# By default doxygen will write a font called FreeSans.ttf to the output
-# directory and reference it in all dot files that doxygen generates. This
-# font does not include all possible unicode characters however, so when you need
-# these (or just want a differently looking font) you can specify the font name
-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
# containing the font.
DOT_FONTNAME = FreeSans
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
DOT_FONTSIZE = 10
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
# can find it using this tag.
-DOT_FONTPATH =
+DOT_FONTPATH =
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
UML_LOOK = NO
-# If set to YES, the inheritance and collaboration graphs will show the
+# If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances.
TEMPLATE_RELATIONS = NO
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
# other documented files.
INCLUDE_GRAPH = YES
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
# indirectly include this file.
INCLUDED_BY_GRAPH = YES
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
# for selected functions only using the \callgraph command.
CALL_GRAPH = NO
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
# If left blank png will be used.
DOT_IMAGE_FORMAT = png
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found in the path.
-DOT_PATH =
+DOT_PATH =
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
# \dotfile command).
-DOTFILE_DIRS =
+DOTFILE_DIRS =
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
DOT_GRAPH_MAX_NODES = 50
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
MAX_DOT_GRAPH_DEPTH = 0
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
# a graph (i.e. they become hard to read).
DOT_TRANSPARENT = NO
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = NO
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs.
GENERATE_LEGEND = YES
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
# the various graphs.
DOT_CLEANUP = YES
@@ -1568,7 +1568,7 @@
# Options related to the search engine
#---------------------------------------------------------------------------
-# The SEARCHENGINE tag specifies whether or not a search engine should be
+# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = NO
Modified: limal-branches/mc-devel/limal-ca-mgm/src/AuthorityInfoAccessExtension.cpp
URL: http://svn.opensuse.org/viewcvs/limal/limal-branches/mc-devel/limal-ca-mgm/src/AuthorityInfoAccessExtension.cpp?rev=2708&r1=2707&r2=2708&view=diff
==============================================================================
--- limal-branches/mc-devel/limal-ca-mgm/src/AuthorityInfoAccessExtension.cpp (original)
+++ limal-branches/mc-devel/limal-ca-mgm/src/AuthorityInfoAccessExtension.cpp Sat Aug 28 18:48:58 2010
@@ -20,10 +20,10 @@
/-*/
-#include