New ARM MicroOS snapshot 20220219 released!
Please note that this mail was generated by a script. The described changes are computed based on the aarch64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=microos&groupid=3&version=Tumbleweed&build=20220219 https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&component=MicroOS&query_format=advanced&resolution=--- Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (21.3.5 -> 21.3.6) Mesa-demo Mesa-drivers (21.3.5 -> 21.3.6) NetworkManager (1.32.12 -> 1.34.0) accountsservice apparmor (3.0.3 -> 3.0.4) appstream-glib (0.7.18 -> 0.7.18+30) augeas avahi bluedevil5 (5.24.0 -> 5.24.1) breeze (5.24.0 -> 5.24.1) btrfsprogs (5.16 -> 5.16.1) busybox-links dhcp discover (5.24.0 -> 5.24.1) dolphin (21.12.2 -> 21.12.2.1) drkonqi5 (5.24.0 -> 5.24.1) evolution-data-server (3.42.3 -> 3.42.4) ffmpeg-4 flatpak (1.12.4 -> 1.12.5) fwupd (1.7.3 -> 1.7.5) gcc gcc11 gdbm (1.22 -> 1.23) gdm gjs (1.70.0 -> 1.70.1) glib2 (2.70.3 -> 2.70.4) glib2-branding-openSUSE glibc (2.34 -> 2.35) gnome-autoar (0.4.2 -> 0.4.3) gnome-control-center (41.2 -> 41.4) gnome-disk-utility gnome-settings-daemon gnome-shell (41.3 -> 41.4) gnome-shell-extensions (41.1 -> 41.2) gnome-software (41.3 -> 41.4) gnome-user-docs (41.1 -> 41.2) gobject-introspection grep grub2 gstreamer (1.18.5 -> 1.18.6) gstreamer-plugins-bad (1.18.5 -> 1.18.6) gstreamer-plugins-base (1.18.5 -> 1.18.6) gstreamer-plugins-good (1.18.5 -> 1.18.6) gtk4 (4.6.0 -> 4.6.1) gvfs gzip harfbuzz (3.2.0 -> 3.3.2) hwdata (0.355 -> 0.356) installation-images-MicroOS (17.39 -> 17.42) iputils kactivitymanagerd (5.24.0 -> 5.24.1) kde-cli-tools5 (5.24.0 -> 5.24.1) kde-gtk-config5 (5.24.0 -> 5.24.1) kdump kernel-source (5.16.5 -> 5.16.10) keylime kgamma5 (5.24.0 -> 5.24.1) khotkeys5 (5.24.0 -> 5.24.1) kinfocenter5 (5.24.0 -> 5.24.1) kmenuedit5 (5.24.0 -> 5.24.1) kscreen5 (5.24.0 -> 5.24.1) kscreenlocker (5.24.0 -> 5.24.1) ksystemstats5 (5.24.0 -> 5.24.1) kuserfeedback (1.0.0 -> 1.2.0) kwayland-integration (5.24.0 -> 5.24.1) kwayland-server (5.24.0 -> 5.24.1) kwin5 (5.24.0 -> 5.24.1) kwrited5 (5.24.0 -> 5.24.1) layer-shell-qt (5.24.0 -> 5.24.1) lcms2 (2.13 -> 2.13.1) libapparmor (3.0.3 -> 3.0.4) libgpg-error (1.43 -> 1.44) libkdecoration2 (5.24.0 -> 5.24.1) libkscreen2 (5.24.0 -> 5.24.1) libksysguard5 (5.24.0 -> 5.24.1) libnetfilter_conntrack (1.0.8 -> 1.0.9) libnvme (1.0~2 -> 1.0~3) libpeas libproxy libqmi (1.30.2 -> 1.30.4) libqt5-qtbase librsvg (2.52.5 -> 2.52.6) libsemanage liburing libzypp (17.29.3 -> 17.29.4) llvm13 milou5 (5.24.0 -> 5.24.1) multipath-tools (0.8.8+45+suse.628d603e -> 0.8.8+64+suse.f265f7e0) mutter (41.3 -> 41.4) nvme-cli (2.0~2 -> 2.0~3) open-iscsi openexr (3.1.3 -> 3.1.4) openssl-1_1 openvpn pam-config (1.5 -> 1.6) pango (1.50.3 -> 1.50.4) patterns-base patterns-gnome patterns-kde (20220203 -> 20220215) plasma-browser-integration (5.24.0 -> 5.24.1) plasma-nm5 (5.24.0 -> 5.24.1) plasma5-addons (5.24.0 -> 5.24.1) plasma5-desktop (5.24.0 -> 5.24.1) plasma5-integration (5.24.0 -> 5.24.1) plasma5-openSUSE plasma5-pa (5.24.0 -> 5.24.1) plasma5-workspace (5.24.0 -> 5.24.1) polkit-kde-agent-5 (5.24.0 -> 5.24.1) powerdevil5 (5.24.0 -> 5.24.1) pulseaudio python-alembic (1.7.5 -> 1.7.6) python-charset-normalizer (2.0.10 -> 2.0.12) python-cryptography python-pandas (1.4.0 -> 1.4.1) python-pyOpenSSL (21.0.0 -> 22.0.0) python-pycups python-pyparsing (3.0.6 -> 3.0.7) python-semanage python-setuptools (57.4.0 -> 58.3.0) rpm-config-SUSE (0.g93 -> 0.g96) selinux-policy sg3_utils (1.47+2.388b767 -> 1.47+3.adb7276) spice-vdagent (0.21.0 -> 0.22.1) sssd (2.6.2 -> 2.6.3) sudo systemd systemd-rpm-macros (15 -> 16) systemsettings5 (5.24.0 -> 5.24.1) sysuser-tools u-boot-rpiarm64 udisks2 vim (8.2.4286 -> 8.2.4375) webkit2gtk3 (2.34.4 -> 2.34.6) webkit2gtk3-soup2 (2.34.4 -> 2.34.6) wireless-regdb (20211209 -> 20220108) wireplumber (0.4.7 -> 0.4.8) wpa_supplicant xdg-dbus-proxy (0.1.2 -> 0.1.3) xdg-desktop-portal-kde (5.24.0 -> 5.24.1) xdm xorg-x11-server xwayland (22.0.99.902 -> 22.1.0) yast2 (4.4.43 -> 4.4.45) === Details === ==== Mesa ==== Version update (21.3.5 -> 21.3.6) Subpackages: Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - update to 21.3.6 * sixth bugfix release ==== Mesa-demo ==== - added sub-packages as dependencies to the main package to ensure the complete installation of the program * Mesa-demo-x * Mesa-demo-es * Mesa-demo-egl - added "-egl" subpackage for common EGL-based demos include eglinfo, eglgears, egltri, peglgears, xeglgears, xeglthreads (boo#1195695) ==== Mesa-drivers ==== Version update (21.3.5 -> 21.3.6) Subpackages: Mesa-dri Mesa-gallium - update to 21.3.6 * sixth bugfix release ==== NetworkManager ==== Version update (1.32.12 -> 1.34.0) Subpackages: libnm0 typelib-1_0-NM-1_0 - Packaging additions with Autotools replacement: + Add Meson build requirement and replace Automake macros with Meson equivalent ones as autotools will be deprecated in the future. + Options passed to Meson to mimmic our default preferences: systemdsystemunitdir=%{_unitdir}, udev_dir=%{_udevdir}, dbus_conf_dir=%{_dbusconfdir}, iptables=%{_sbindir}/iptables, dnsmasq=%{_sbindir}/dnsmasq, dnssec_trigger=%{_libexecdir}\ /dnssec-trigger-script, dist_version=%{version}, polkit_agent_helper_1=%{_libexecdir}/polkit-1\ /polkit-agent-helper-1, hostname_persist=suse, switchable libaudit=%{libaudit_meson_opt}, iwd=true, pppd=%{_sbindir}\ /pppd, pppd_plugin_dir=%{_pppddir}, nm_cloud_setup=true, bluez5_dun=true, netconfig=%{_sbindir}/netconfig, dhclient=%{_sbindir}/dhclient, docs=true, switchable tests=%{tests_meson_opt}, more_asserts=0, more_logging=false, qt=false, and switchable teamdctl=true (teamctl is about to be deprecated). + Add conditionalized audit pkgconfig module build requirement to allow easier feature testing, and pass 'yes-disabled-by-default' to 'libaudit' Meson option. As an observation: Meson defaults passing 'yes' to this feature. + Add explicit c++_compiler build requirement to avoid build abortion. + Add explicit libselinux pkgconfig module build requirement checked by Meson and was already being pulled in by some other package. + Add polkit-gobject-1 pkgconfig module build requirement checked by Meson and needed for user auth-polkit support. + Add mobile-broadband-provider-info pkgconfig module build requirement checked by Meson and needed for ModemManager1 interface support. + Add sed command to fix server.conf config file location from defaultdocdir/NetworkManager/examples to defaultdocdir/NetworkManager. + Add useful %{_pppddir} and %{_dbusconfdir} macros to spec file, while dropping no longed needed pppddir shell variable definition and 'test -n "$pppddir" || exit 1' construct. + Add "< 1.21" version to libnm-glib-vpn1, libnm-glib4, and libnm-util2 < 1.21 to main package's Obsoletes tags, following packaging good practices to avoid future unwated behavior regarding versioning schemes. + Replace %version macro with hardcoded "0.9.1" version to the devel subpackage's %name-doc Obsoletes tag following packaging good practices to avoid future unwanted behaviors regarding versioning schemes (the doc subpackage was merged with the devel one in the 0.9.0 release). + Pass "%{?no_lang_C}" to %find_lang macro to avoid stripping any English translations (the default language) from main package. - Packaging deletions with Autotools replacement: + Remove data/server.conf from %doc macro in files section as it no longer works with Meson. + Remove "rm" command on server.conf file following sed command addition to fix the right location of the file. + Remove no longer useful conditional build abortion depending whether or not netconfig support was found 'grep "with_netconfig='no'" config.log' since this file isn't generated by Meson. + Remove no longer needed "find" command for GNU Libtool LA files deletion. + Drop no longer needed libtool build requirement as Meson does not use it. + Drop redundant sysconfig-netconfig build requirement as it does not add anything to the build anymore. + Drop comment about suse-release build requirement not being needed anymore, it's been deprecated for almost a decade now. + Drop setBadness for 'dbus-file-unauthorized' in the rpmlintrc: the new dbus file has been whitelisted already (bsc#1194799). - Split out NetworkManager-pppoe, needed to configure regular PPPoE connections (Not very common, as most users have PPPoE routers for the DSL connections). - Update to version 1.34.0: + initrd: wait for both IPv4 and IPv6 with "ip=dhcp,dhcp6" + core: better handle sd-resolved errors when resolving hostnames + nmcli: fix import WireGuard profile with DNS domain and address family disabled + ndisc: send router solicitations before expiry + policy: send earlier the ip configs to the DNS manager + core: support linking with LLD 13 + wireguard: importing wg-quick configuration files with nmcli no longer sets a negative, exclusive "dns-priority". This plays better with common split DNS setups that use systemd-resolved. Adjust the "dns-priority" to your liking after import yourself. + NetworkManager no longer listens for netlink events for traffic control objects (qdiscs and filters). + core: add internal nm-priv-helper service for separating privileges and have a way to drop capabilities from NetworkManager daemon. + bond: add support for setting queue-id of bond port. + dns: support configuring DNS over TLS (DoT) with systemd-resolved. + nmtui: add support for WireGuard profiles. + nmcli: add aliases `nmcli device up|down` beside connect|disconnect. + conscious language: Deprecate 'Device.Slaves' D-Bus property in favor of new 'Device.Ports' property. Depracate 'nm_device_*_get_slaves()' in favor of 'nm_device_get_ports()' in libnm. + nmcli: invoking nmcli command without arguments will now show 'default' instead of null address in route4 or route6 section. - Refresh patches with quilt. - Replace addFilter("suse-branding-unversioned-requires*") from rpmlintrc, with the current branding-requires-unversioned. - Update our Supplements to current standard. - Add the new internal nm-priv-helper.service to pre(un)/post(un) handling. ==== accountsservice ==== Subpackages: libaccountsservice0 typelib-1_0-AccountsService-1_0 - Add ac9b14f1c1bbca413987d0bbfeaad05804107e9a.patch: Fix build with meson 0.61.0. ==== apparmor ==== Version update (3.0.3 -> 3.0.4) Subpackages: apparmor-abstractions apparmor-parser apparmor-profiles apparmor-utils python3-apparmor - update to AppArmor 3.0.4 - various fixes in profiles, abstractions, apparmor_parser and utils (some of them were already included as patches) - add support for mctp address family - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_3.0.4 for the full upstream changelog - remove upstream(ed) patches: - aa-notify-more-arch-mr809.diff - ruby-3.1-build-fix.diff - add-samba-bgqd.diff - openssl-engdef-mr818.diff - profiles-python-3.10-mr783.diff - update-samba-abstractions-ldb2.diff - refresh patches: - apparmor-samba-include-permissions-for-shares.diff - ruby-2_0-mkmf-destdir.patch ==== appstream-glib ==== Version update (0.7.18 -> 0.7.18+30) Subpackages: libappstream-glib8 - Update to version 0.7.18+30: * libappstream-builder: Fix file paths in icon tarball - Update to version 0.7.18+29: * Updated translations. - Improve _service file to handle to drop +0 in versions for when we are exactly on a tag. - Update to version 0.7.18+28: * as-app: Also unwrap description in metainfo files * Fix validation of translated captions when LANG is not C * Revert "Don't emit legacy component type values" * Don't emit legacy component type values * its: Sync with appstream * Consider AppStream version as a string * meson: Check --version-script linker option before using. * Update current newest version in AsStore * Support em/code tags Some appstream-data packages add <em> and </em> or <code> and </code> to the files. Not all package manager can handle that. An example would be pamac from Manjaro * Update asb-self-test to match current behavior * Add validation for duplicate license xml elements * builder: make directories as 0755 && umask * Do not show a critical warning on <suggests><id/></suggests> * libappstream-builder: Fix paths for cached icons * as-util: Fix Markdown underlining in appdata-to-news * Replace links http://standards.freedesktop.org/... by https in README.md * Replace a link http://www.freedesktop.org/wiki/... by https in README.md * as-app: Parse launchables from DEP-11 * as-app: Parse custom tags from DEP-11 * as-content-rating: Align the OARS/CSM mappings of sex-* * Updated translations. - Switch to current git head, upstream is not making releases. - Drop 0001-as-app-Also-unwrap-description-in-metainfo-files.patch: Fixed upstream. - Add patch to fix descriptions in .metainfo.xml files (boo#1192243, gh#hughsie/appstream-glib#381): * 0001-as-app-Also-unwrap-description-in-metainfo-files.patch ==== augeas ==== - testsuite requires glibc-locale, buildrequire it ==== avahi ==== Subpackages: libavahi-client3 libavahi-common3 libavahi-core7 - Replace avahi-0.6.31-systemd-order.patch with avahi-add-resolv-conf-to-inotify.patch: re-read configuration when resolv.conf changes, per discussion on the bug (boo#1194561). ==== bluedevil5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * kded/devicemonitor: Check BlueDevilDaemon exists when calling login1PrepareForSleep (kde#450195) ==== breeze ==== Version update (5.24.0 -> 5.24.1) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-wallpapers libbreezecommon5-5 - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Fix "Blue Ocean" styling of QCommandLinkButtons ==== btrfsprogs ==== Version update (5.16 -> 5.16.1) Subpackages: btrfsprogs-udev-rules libbtrfs0 - Update to 5.16.1 * mkfs: support DUP on metadata on zoned devices * subvol delete: drop warning for root when search ioctl fails * check: * fix --init-csum-tree to not create checksums for extents that are not supposed to have them * add check for metadata item levels * add udev rule for zoned devices as they require mq-deadline * build: fix redefinition of ALIGN on mixed old/new kernel/userspace (5.11) * other: * typo fixes * new tests * CI targets updated * Removed patches: btrfs-progs-kerncompat-add-local-definition-for-alig.patch (upstream) ==== busybox-links ==== Subpackages: busybox-coreutils busybox-gawk busybox-grep busybox-gzip busybox-hostname busybox-sed busybox-xz - Drop update-alternatives support ==== dhcp ==== Subpackages: dhcp-client - modify source if-up.d.dhcpd-restart-hook: * fix option parsing * do not call /usr/libexec/dhcp/dhcpd directly, use systemd for it ==== discover ==== Version update (5.24.0 -> 5.24.1) Subpackages: discover-backend-flatpak discover-backend-packagekit discover-notifier - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * notifier: Don't trigger updates while busy * notifier: Update lastUnattendedTrigger before checking for updates again * notifier: Actually save LastUnattendedTrigger * notifier: Use KIdleTime properly * Use C++17 * Don't display critical packages/apps in the UI * update: Ensure we never have two update processes running in parallel * Implement Kirigami.CheckableListItem properly (kde#449766) * Fix unattended update interval check - 5.24.0 tarball got updated: * kns: Do not keep an own Attica::Provider * notifier: Make sure we don't trigger offline updates too often * notifier: Only refresh unattended when it actually changes * ApplicationPage: Fix infinite resize loop on screenshoots (kde#449583) * Force focus to the search field properly (kde#417213) * Fix global drawer overlapping the app screenshot (kde#434055) ==== dolphin ==== Version update (21.12.2 -> 21.12.2.1) Subpackages: dolphin-part libdolphinvcs5 - Update to 21.12.2.1 * Fix opening FTP files in their preferred app * Use the CDN based endpoint rather than the legacy endpoint ==== drkonqi5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== evolution-data-server ==== Version update (3.42.3 -> 3.42.4) Subpackages: libcamel-1_2-63 libebackend-1_2-10 libebook-1_2-20 libebook-contacts-1_2-3 libecal-2_0-1 libedata-book-1_2-26 libedata-cal-2_0-1 libedataserver-1_2-26 libedataserverui-1_2-3 - Update to version 3.42.4: + IMAPx: Avoid creating NOSELECT CamelFolder-s + CamelMimeFilterCRLF: Correct encoding part of the filter + CamelMimeParser: Correct body content parse when CRLF is used + camel-net-utils: Allow NULL string arguments in IDNA/ASCII functions + Bugs fixed: glgo#GNOME/evolution-data-server#374 ==== ffmpeg-4 ==== Subpackages: libavcodec58_134 libavformat58_76 libavutil56_70 libswresample3_9 - Disamble libsmbclient usage (can always be built with - -with-smbclient): the usecase of ffmpeg directly accessing smb:// shares is quite constructed (most users will have their smb shares mounted). ==== flatpak ==== Version update (1.12.4 -> 1.12.5) Subpackages: libflatpak0 system-user-flatpak - drop apparently unused libdwarf buildrequires - Update to version 1.12.5: + Detect and remove left-over data from /var/lib/flatpak/appstream + Fix display bugs in flatpak history + Don't set up an unnecessary polkit agent for flatpak history + Don't propagate GStreamer-related environment variables into sandbox + Updated translations. ==== fwupd ==== Version update (1.7.3 -> 1.7.5) Subpackages: libfwupd2 libfwupdplugin5 typelib-1_0-Fwupd-2_0 - Update to version 1.7.5: * This release adds the following features: + Add a flag to indicate the firmware is not provided by the vendor + Add support for showing dependency versions in JSON format + Allow fwupd to operate in socket mode without a D-Bus daemon + Allow marking a device as End-of-Life by the OEM vendor + Allow specifying the machine Best Known Configuration locally + Fall back to the ARM Device Tree 'compatible' data when required * This release fixes the following bugs: + Be more robust by retrying IPMI transactions on servers + Change the expired Redfish password when required + Fix a ModemManager segfault on startup for some MBIM-QDU devices + Fix a possible dell-dock segfault at startup + Fix compiling with new versions of efivar + Fix the Nordic bootloader type detection + Fix USB4 retimer enumeration + Get the SMBIOS table and host machine ID when running on Windows + Show results when calling get-details if failing requirements + Uninhibit the modem using ModemManager after upgrade * This release adds support for the following hardware: + Future Analogix devices + NovaCustom NV4x - Changes from version 1.7.4: * This release adds the following features: + Add firmware branch support for ModemManager devices + Allow firmware engineers to patch files at known offsets + Show why more devices are not marked as updatable * This release fixes the following bugs: + Allow fwupdtool to be run as the non-root user in more cases + Assign the Logitech bulkcontroller update interface correctly + Do not allow UEFI updates when the laptop lid is closed + Do not autoload ipmi-si to avoid warning on non-server hardware + Do not show a critical warning for a weird TPM event log + Fix waiting for USB devices when using Windows + Ignore non-PCI NVMe devices * This release adds support for the following hardware: + HP USB-C G2 Dock + Many UF2 devices, experimentally + More PixArt devices + Nordic HID devices using MCUBoot + Quectel EG25-G LTE Modem + ThinkPad Thunderbolt 4 Dock ==== gcc ==== - Move gcc-PIE contents to gccVER-PIE and only require that from the gcc-PIE package. [bsc#1195628] ==== gcc11 ==== Subpackages: cpp11 libgcc_s1 libgfortran5 libgomp1 libstdc++6 libubsan1 - Add gcc11-PIE, similar to gcc-PIE but affecting gcc11 [bsc#1195628] - Put libstdc++6-pp Requires on the shared library and drop to Recoomends. - Remove sys/rseq.h from include-fixed ==== gdbm ==== Version update (1.22 -> 1.23) Subpackages: libgdbm6 libgdbm_compat4 - update to 1.23: * Bucket cache switched from balanced tree to hash table * Speed up flushing the changed buckets on disk * New option codes for gdbm_setopt * Enable or disable automatic cache adjustment - remove obsolete texinfo packaging macros ==== gdm ==== Subpackages: gdm-schema gdmflexiserver libgdm1 typelib-1_0-Gdm-1_0 - Use _pam_vendordir instead of _distconfdir/pam.d (boo#1195996). AS this means /etc/pam.d on SLE15, we mark those files as %config(noreplace). ==== gjs ==== Version update (1.70.0 -> 1.70.1) Subpackages: libgjs0 typelib-1_0-GjsPrivate-1_0 - Update to version 1.70.1: + Build and crash fixes backported from the development branch. + Closed bugs and merge requests: - Handle optional out parameters in callbacks - Link fails on Debian armel|mipsel|powerpc: needs more - latomic - gjs/jsapi-util.cpp: fix build on gcc-12 - Drop patches fixed upstream: + b9e122044a7ccc1e2a3374c680b6ea82066bfa59.patch + 62025d4a2738a36ea5f1a7cebef08b22b5eef613.patch ==== glib2 ==== Version update (2.70.3 -> 2.70.4) Subpackages: glib2-tools libgio-2_0-0 libglib-2_0-0 libgmodule-2_0-0 libgobject-2_0-0 - Update to version 2.70.4: + Bugs fixed: glgo#GNOME/GLib!2462 ?Fix memory leak in gio/gdbusauthmechanismsha1.c? to glib-2-70. + Updated translations. ==== glib2-branding-openSUSE ==== - Drop gnome-documents from favorite-apps for both openSUSE and SLED, package is archived upstream. ==== glibc ==== Version update (2.34 -> 2.35) Subpackages: glibc-locale glibc-locale-base - Update to glibc 2.35 Major new features: * Unicode 14.0.0 Support * Bump r_version in the debugger interface to 2 * Support for the C.UTF-8 locale has been added to glibc * <math.h> functions that round their results to a narrower type, and corresponding <tgmath.h> macros, are added from TS 18661-1:2014, TS 18661-3:2015 and draft ISO C2X * <math.h> functions for floating-point maximum and minimum, corresponding to new operations in IEEE 754-2019, and corresponding <tgmath.h> macros, are added from draft ISO C2X * <math.h> macros for single-precision float constants are added as a GNU extension * The __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__ macros are predefined as specified in TS 18661-1:2014 * The exp10 functions in <math.h> now have a corresponding type-generic macro in <tgmath.h> * The ISO C2X macro _PRINTF_NAN_LEN_MAX has been added to <stdio.h> * printf-family functions now support the %b format for output of integers in binary, as specified in draft ISO C2X, and the %B variant of that format recommended by draft ISO C2X * A new DSO sorting algorithm has been added in the dynamic linker that uses topological sorting by depth-first search (DFS), solving performance issues of the existing sorting algorithm when encountering particular circular object dependency cases * A new tunable, glibc.rtld.dynamic_sort, can be used to select between the two DSO sorting algorithms * ABI support for a new function '__memcmpeq'. '__memcmpeq' is meant to be used by compilers for optimizing usage of 'memcmp' when its return value is only used for its boolean status * Support for automatically registering threads with the Linux rseq system call has been added * A symbolic link to the dynamic linker is now installed under /usr/bin/ld.so (or more precisely, '${bindir}/ld.so') * All programs and the testsuite in glibc are now built as position independent executables (PIE) by default on toolchains and architectures that support it * On Linux, a new tunable, glibc.malloc.hugetlb, can be used to either make malloc issue madvise plus MADV_HUGEPAGE on mmap and sbrk or to use huge pages directly with mmap calls with the MAP_HUGETLB flags) * The printf family of functions now handles the flagged %#m conversion specifier, printing errno as an error constant (similar to strerrorname_np) * The function _dl_find_object has been added * On Linux, the epoll_pwait2 function has been added * The function posix_spawn_file_actions_addtcsetpgrp_np has been added, enabling posix_spawn and posix_spawnp to set the controlling terminal in the new process in a race free manner * Source fortification (_FORTIFY_SOURCE) level 3 is now available for applications compiling with glibc and gcc 12 and later Deprecated and removed features, and other changes affecting compatibility: * On x86-64, the LD_PREFER_MAP_32BIT_EXEC environment variable support has been removed since the first PT_LOAD segment is no longer executable due to defaulting to -z separate-code * The r_version update in the debugger interface makes the glibc binary incompatible with GDB * Intel MPX support (lazy PLT, ld.so profile, and LD_AUDIT) has been removed * The catchsegv script and associated libSegFault.so shared object have been removed * Support for prelink will be removed in the next release; this includes removal of the LD_TRACE_PRELINKING, and LD_USE_LOAD_BIAS, environment variables and their functionality in the dynamic loader Changes to build and runtime requirements: * The audit module interface version LAV_CURRENT is increased to enable proper bind-now support * The audit interface on aarch64 is extended to support both the indirect result location register (x8) and NEON Q register Security related changes: * CVE-2022-23219: Passing an overlong file name to the clnt_create legacy function could result in a stack-based buffer overflow when using the "unix" protocol * CVE-2022-23218: Passing an overlong file name to the svcunix_create legacy function could result in a stack-based buffer overflow * CVE-2021-3998: Passing a path longer than PATH_MAX to the realpath function could result in a memory leak and potential access of uninitialized memory * CVE-2021-3999: Passing a buffer of size exactly 1 byte to the getcwd function may result in an off-by-one buffer underflow and overflow when the current working directory is longer than PATH_MAX and also corresponds to the / directory through an unprivileged mount namespace - copy-and-spawn-sgid-double-close.patch, fcntl-time-bits-64-redirect.patch, gaiconf-init-double-free.patch, gconv-parseconfdir-memory-leak.patch, getcwd-attribute-access.patch, glibc-c-utf8-locale.patch, iconv-charmap-close-output.patch, ld-show-auxv-colon.patch, ldconfig-leak-empty-paths.patch, librt-null-pointer.patch, pthread-kill-fail-after-exit.patch, pthread-kill-race-thread-exit.patch, pthread-kill-return-esrch.patch, pthread-kill-send-specific-thread.patch, pthread-mutexattr-getrobust-np-type.patch, setxid-deadlock-blocked-signals.patch, sysconf-nprocessors-affinity.patch, x86-string-control-test.patch: Removed. ==== gnome-autoar ==== Version update (0.4.2 -> 0.4.3) - Update to version 0.4.3: + Prevent NULL dereference when extracting to root. + Do not include basename in error messages. + Do not request password when encryption is unsupported. + Propagate libarchive errors when extraction failed. ==== gnome-control-center ==== Version update (41.2 -> 41.4) Subpackages: gnome-control-center-goa - Update to version 41.4: + Drop unused argument for i18n.merge_file() in Meson rules + Applications: Set the Icon key in desktop file to a icon that exists + Display: Do not invert order when constructing modes + Network: Show configuration button only for active/connecting connections + Printers: Fix error cancelling PPD dialog + Sound: Clear level bar when stream is empty + Updated translations. - Drop 4f64deb5f1bc7b83fcc4381b7dbbaf71ad4a77c8.patch: Fixed upstream. ==== gnome-disk-utility ==== - Add 60.patch: Fix build with meson 0.61 and newer. ==== gnome-settings-daemon ==== - Add 283.patch: Fix build with meson 0.60.0 and newer. - Renumber SLE/LEAP only patches to 1000+ range, make the separation of appliance more clear. ==== gnome-shell ==== Version update (41.3 -> 41.4) Subpackages: gnome-shell-calendar - Add gnome-shell-fix-NMDevice-get-path.patch: Fix the NMDevice get_path is null(bsc#1176553 glgo#GNOME/gnome-shell#4565). - Update to version 41.4: + Start tracking windows when expected by extensions. + Fix timing issue on login screen. + Fix lightbox shader compatibility with older drivers. + Fix activating apps with tracked OR windows. + Fix banding issues with the vignette lightbox shader. + Fix keyboard navigation to windows/apps in overview. + Fix stuck transition when using super-scroll gesture. + Fix calendar events with custom timezone. + Fix out-of-sync location indicator. + Misc. bug fixes and cleanups. + Updated translations. - Update gs-fate318433-prevent-same-account-multi-logins.patch: Fix the JS ERR: Error: Wrong type number; string expected (bsc#1195179 bsc#1195141). - Add 2078.patch: Fix build with meson 0.61 and newer. ==== gnome-shell-extensions ==== Version update (41.1 -> 41.2) Subpackages: gnome-shell-classic gnome-shell-extensions-common - Update to version 41.2: + window-list: Update window tracking to avoid missing icons. - Rebase gse-sle-classic-ext.patch. - Add cdaa837d48894737ca0b4e7d2dfb365119e53759.patch: Fix build with meson 0.61 and newer. Backported to apply on stable version. ==== gnome-software ==== Version update (41.3 -> 41.4) - Update to version 41.4: + Updated translations. ==== gnome-user-docs ==== Version update (41.1 -> 41.2) - Update to version 41.2: + Added missing icon for network-wired-symbolic + Added Ubuntu note about GNOME Classic prerequisite + Updated translations. ==== gobject-introspection ==== Subpackages: girepository-1_0 libgirepository-1_0-1 - use bash for bash scripts (bsc#1195391) - Add upstream patches to fix build with meson 0.61.0 and newer: + 7c1178069f1c58a05ec56a94ca6ba124215a947b.patch + effb1e09dee263cdac4ec593e8caf316e6f01fe2.patch + 827494d6415b696a98fa195cbd883b50cc893bfc.patch ==== grep ==== - use glibc-locale to reenable less common locale tests (bsc#1195390) ==== grub2 ==== Subpackages: grub2-arm64-efi grub2-snapper-plugin - Set grub2-check-default shebang to "#!/bin/bash", as the the code uses many instructions which are undefined for a POSIX sh. (boo#1195794). ==== gstreamer ==== Version update (1.18.5 -> 1.18.6) Subpackages: libgstreamer-1_0-0 typelib-1_0-Gst-1_0 - Update to version 1.18.6: + gstplugin: Fix for UWP build + gst-ptp-helper: Do not disable multicast loopback + concat: fix qos event handling + pluginfeature: Fix object leak + baseparse: fix invalid avg_bitrate after reset + multiqueue: Fix query unref race on flush + gst: Initialize optional event/message fields when parsing + bitwriter: Fix the trailing bits lost when getting its data + multiqueue: never consider a queue that is not waiting + input-selector: Use proper segments when cleaning cached buffers ==== gstreamer-plugins-bad ==== Version update (1.18.5 -> 1.18.6) Subpackages: libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstcodecs-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgstplayer-1_0-0 libgstsctp-1_0-0 libgsturidownloader-1_0-0 libgstvulkan-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 - Update to version 1.18.6: + interlace: Fix a double-unref on shutdown + webrtcbin: Chain up to parent constructed method + webrtc: fix log error message in function gst_webrtc_bin_set_local_description + mxfdemux: don't error out if VANC track only contains packets we don't handle + av1parser: Fix data type of film grain param + assrender: Support RFC8081 mime types + pitch: Specify layout as required for negotiation + magicleap: update lumin_rt libraries names to the latest official version + codecs: h265decoder: Fix per-slice leak + mpeg4videoparse: fix criticals trying to insert configs that don't exist yet + webrtcbin: Always set SINK/SRC flags + mpegtspacketizer: memcmp potentially seen_before data + zxing: update to support version 1.1.1 - Drop service, use source url, upstream changes in git. ==== gstreamer-plugins-base ==== Version update (1.18.5 -> 1.18.6) Subpackages: libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstfft-1_0-0 libgstgl-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgstvideo-1_0-0 - Update to version 1.18.6: + tagdemux: Fix crash when presented with malformed files (security fix) + videoencoder: make sure the buffer is writable before modifying metadata + video-converter: Fix for broken gamma remap with high bitdepth YUV output + sdpmessage: fix mapping single char fmtp params + oggdemux: fix a race in push mode when performing the duration seek + uridecodebin: Fix critical warnings + audio-converter: Fix resampling when there's nothing to output + tcp: fix build on Solaris + uridecodebin3: Nullify current item after all play items are freed. + audio-resampler: Fix segfault when we can't output any frames + urisourcebin: Handle sources with dynamic pads and pads already present + playbin2/3: autoplug/caps: don't expand caps to ANY + uridecodebin3/urisourcebin: Reusability fixes + rtspconnection: Only reset timeout when socket is unused + gstvideoaggregator.c: fix build with gcc 4.8 - Drop service, use source url, upstream changes in git. ==== gstreamer-plugins-good ==== Version update (1.18.5 -> 1.18.6) - Update to version 1.18.6: + rtspsrc: Fix critical while serializing timeout element message + multifilesrc: fix caps leak + shout2: Add compatibility for libshout >= 2.4.2 shout_open return values + v4l2: Update fmt if padded height is greater than fmt height + v4l2bufferpool: set video alignment of video meta + qtmux: fix deadlock in gst_qt_mux_prepare_moov_recovery + matroska: Add support for muxing/demuxing ffv1 + qtdemux: Try to build AAC codec-data whenever it's possible - Remove service, use source url, upstream changes in git. ==== gtk4 ==== Version update (4.6.0 -> 4.6.1) Subpackages: gtk4-schema libgtk-4-1 typelib-1_0-Gtk-4_0 - Update to version 4.6.1: + GtkFontChooser: - Stop using PangoFc api - Fix a crash - Use new HarfBuzz api + GtkMenuButton: Update accessible description + GtkTextView: Fix intra-widget dnd + Printing: Fix an fd leak + Input: - Make sure input methods get focus-in events - Always flush events to avoid scroll event pileup - Support hold events - Update keysyms from libxkbcommon + Theme: Improve text selection legibility + Introspection: Add missing nullable annotations everywhere + Build: - Make stack noexec again - Avoid symbol leaks - Drop unneeded script data + Wayland: - Fix support for the new high-contrast setting - Avoid redundant scale changes - Fix DND hotspot handling - Don't always restore the saved size when floating + Updated translations. - Drop gtk4-make-our-stack-noexec.patch: Fixed upstream. ==== gvfs ==== Subpackages: gvfs-backends - Add 17a067b9b823a0d54e061eae45ff8e2c7e4a88d0.patch: Fix build with meson 0.61 and newer. Backported to apply on stable version. ==== gzip ==== - add conflicts/provides for alternative(gzip) - modernize spec file ==== harfbuzz ==== Version update (3.2.0 -> 3.3.2) Subpackages: libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz-subset0 libharfbuzz0 typelib-1_0-HarfBuzz-0_0 - update to 3.3.2: + Revert splitting of pair positioning values introduced in 3.3.0 as it proved problematic - includes changes from 3.3.1: + Fix heap-use-after-free in harfbuzz-subset introduced in previous release - includes changes from 3.3.0: + Improved documentation, code cleanup + The low 16-bits of face index will be used by hb_face_create() to select a face inside a font collection file format, while the high 16-bits will be used by hb_font_create() to load the named instance + Glyph positions and other font metrics now apply synthetic slant set by hb_font_set_synthetic_slant(), for improved positioning for synthetically slanted fonts + Fixed unintentional locale dependency in hb_variation_to_string() for decimal point representation + When applying pair positioning (kerning) the positioning value is split between the two sides of the pair for improved cursor positioning between such pairs + Introduced new HB_GLYPH_FLAG_UNSAFE_TO_CONCAT, to be used in conjunction with HB_GLYPH_FLAG_UNSAFE_TO_BREAK for optimizing re-shaping during line breaking. Check the documentation for further details + Improved handling of macrolanguages when mapping BCP 47 codes to OpenType tags ==== hwdata ==== Version update (0.355 -> 0.356) - Update to version 0.356: + Updated pci, usb and vendor ids. ==== installation-images-MicroOS ==== Version update (17.39 -> 17.42) - merge gh#openSUSE/installation-images#577 - remove obsolete systemd-sysvinit package - 17.42 - merge gh#openSUSE/installation-images#572 - debuginfodeps: blacklist usr/bin/syslinux-mtools - 17.41 - merge gh#openSUSE/installation-images#554 - Support for new oscrc location - 17.40 ==== iputils ==== - rarpd and rdisc tools are now disabled again [jsc#SLE-23521] ==== kactivitymanagerd ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== kde-cli-tools5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * plasma-open-settings: systemsettings5 is now systemsettings ==== kde-gtk-config5 ==== Version update (5.24.0 -> 5.24.1) Subpackages: kde-gtk-config5-gtk3 - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== kdump ==== - Exclude i586 from SLE builds. ==== kernel-source ==== Version update (5.16.5 -> 5.16.10) - Revert "config: x86-64: Enable DRM stack for early-boot graphics (boo#1193472)" This reverts commit 8e500f570e98a3997e9f4bc80b4c45bba2a50789. Going back to efifb/vesafb for now. See boo#1195885 and boo#1195887. - commit 20d1fcf - Linux 5.16.10 (bsc#1012628). - integrity: check the return value of audit_log_start() (bsc#1012628). - audit: don't deref the syscall args when checking the openat2 open_how::flags (bsc#1012628). - ima: fix reference leak in asymmetric_verify() (bsc#1012628). - ima: Remove ima_policy file before directory (bsc#1012628). - ima: Allow template selection with ima_template[_fmt]= after ima_hash= (bsc#1012628). - ima: Do not print policy rule with inactive LSM labels (bsc#1012628). - mmc: sdhci-of-esdhc: Check for error num after setting mask (bsc#1012628). - mmc: core: Wait for command setting 'Power Off Notification' bit to complete (bsc#1012628). - mmc: sh_mmcif: Check for null res pointer (bsc#1012628). - can: isotp: fix potential CAN frame reception race in isotp_rcv() (bsc#1012628). - can: isotp: fix error path in isotp_sendmsg() to unlock wait queue (bsc#1012628). - net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs (bsc#1012628). - net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs (bsc#1012628). - NFS: Fix initialisation of nfs_client cl_flags field (bsc#1012628). - NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes (bsc#1012628). - NFSD: Fix ia_size underflow (bsc#1012628). - NFSD: Clamp WRITE offsets (bsc#1012628). - NFSD: Fix offset type in I/O trace points (bsc#1012628). - NFSD: Fix the behavior of READ near OFFSET_MAX (bsc#1012628). - NFS: change nfs_access_get_cached to only report the mask (bsc#1012628). - NFSv4 only print the label when its queried (bsc#1012628). - nfs: nfs4clinet: check the return value of kstrdup() (bsc#1012628). - NFSv4.1: Fix uninitialised variable in devicenotify (bsc#1012628). - NFSv4 remove zero number of fs_locations entries error check (bsc#1012628). - NFSv4 store server support for fs_location attribute (bsc#1012628). - NFSv4.1 query for fs_location attr on a new file system (bsc#1012628). - NFSv4 expose nfs_parse_server_name function (bsc#1012628). - NFSv4 handle port presence in fs_location server string (bsc#1012628). - SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt (bsc#1012628). - net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change (bsc#1012628). - sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change() (bsc#1012628). - irqchip/realtek-rtl: Service all pending interrupts (bsc#1012628). - perf/x86/rapl: fix AMD event handling (bsc#1012628). - x86/perf: Avoid warning for Arch LBR without XSAVE (bsc#1012628). - sched: Avoid double preemption in __cond_resched_*lock*() (bsc#1012628). - drm/vc4: Fix deadlock on DSI device attach error (bsc#1012628). - drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer (bsc#1012628). - net: sched: Clarify error message when qdisc kind is unknown (bsc#1012628). - powerpc/fixmap: Fix VM debug warning on unmap (bsc#1012628). - s390/module: test loading modules with a lot of relocations (bsc#1012628). - arm64: Add Cortex-X2 CPU part definition (bsc#1012628). - arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges (bsc#1012628). - scsi: target: iscsi: Make sure the np under each tpg is unique (bsc#1012628). - scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup() (bsc#1012628). - scsi: qedf: Add stag_work to all the vports (bsc#1012628). - scsi: qedf: Fix refcount issue when LOGO is received during TMF (bsc#1012628). - scsi: qedf: Change context reset messages to ratelimited (bsc#1012628). - scsi: pm8001: Fix bogus FW crash for maxcpus=1 (bsc#1012628). - scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode() (bsc#1012628). - scsi: ufs: Treat link loss as fatal error (bsc#1012628). - scsi: myrs: Fix crash in error case (bsc#1012628). - net: stmmac: reduce unnecessary wakeups from eee sw timer (bsc#1012628). - PM: hibernate: Remove register_nosave_region_late() (bsc#1012628). - drm/amd/display: Correct MPC split policy for DCN301 (bsc#1012628). - drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval (bsc#1012628). - drm/amdgpu/display: use msleep rather than udelay for long delays (bsc#1012628). - usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend (bsc#1012628). - perf: Always wake the parent event (bsc#1012628). - nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (bsc#1012628). - MIPS: Fix build error due to PTR used in more places (bsc#1012628). - net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout() (bsc#1012628). - arm64: errata: Add detection for TRBE ignored system register writes (bsc#1012628). - arm64: errata: Add detection for TRBE invalid prohibited states (bsc#1012628). - arm64: errata: Add detection for TRBE trace data corruption (bsc#1012628). - arm64: cpufeature: List early Cortex-A510 parts as having broken dbm (bsc#1012628). - kasan: test: fix compatibility with FORTIFY_SOURCE (bsc#1012628). - KVM: eventfd: Fix false positive RCU usage warning (bsc#1012628). - KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER (bsc#1012628). - KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS (bsc#1012628). - KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermode (bsc#1012628). - KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow (bsc#1012628). - KVM: x86: Report deprecated x87 features in supported CPUID (bsc#1012628). - riscv: fix build with binutils 2.38 (bsc#1012628). - riscv: Fix XIP_FIXUP_FLASH_OFFSET (bsc#1012628). - riscv: cpu-hotplug: clear cpu from numa map when teardown (bsc#1012628). - riscv/mm: Add XIP_FIXUP for phys_ram_base (bsc#1012628). - riscv: eliminate unreliable __builtin_frame_address(1) (bsc#1012628). - gfs2: Fix gfs2_release for non-writers regression (bsc#1012628). - Revert "gfs2: check context in gfs2_glock_put" (bsc#1012628). - Revert "PCI/portdrv: Do not setup up IRQs if there are no users" (bsc#1012628). - ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group (bsc#1012628). - ARM: dts: Fix boot regression on Skomer (bsc#1012628). - ARM: socfpga: fix missing RESET_CONTROLLER (bsc#1012628). - nvme-tcp: fix bogus request completion when failing to send AER (bsc#1012628). - ACPI/IORT: Check node revision for PMCG resources (bsc#1012628). - PM: s2idle: ACPI: Fix wakeup interrupts handling (bsc#1012628). - drm/amdgpu/display: change pipe policy for DCN 2.0 (bsc#1012628). - drm/rockchip: vop: Correct RK3399 VOP register fields (bsc#1012628). - drm/i915: Disable DRRS on IVB/HSW port != A (bsc#1012628). - ARM: dts: Fix timer regression for beagleboard revision c (bsc#1012628). - ARM: dts: meson: Fix the UART compatible strings (bsc#1012628). - ARM: dts: meson8: Fix the UART device-tree schema validation (bsc#1012628). - ARM: dts: meson8b: Fix the UART device-tree schema validation (bsc#1012628). - phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option (bsc#1012628). - tee: optee: do not check memref size on return from Secure World (bsc#1012628). - optee: add error checks in optee_ffa_do_call_with_arg() (bsc#1012628). - staging: fbtft: Fix error path in fbtft_driver_module_init() (bsc#1012628). - ARM: dts: imx6qdl-udoo: Properly describe the SD card detect (bsc#1012628). - phy: xilinx: zynqmp: Fix bus width setting for SGMII (bsc#1012628). - phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() (bsc#1012628). - ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo (bsc#1012628). - arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers (bsc#1012628). - usb: f_fs: Fix use-after-free for epfile (bsc#1012628). - arm64: Enable Cortex-A510 erratum 2051678 by default (bsc#1012628). - phy: dphy: Correct clk_pre parameter (bsc#1012628). - gpio: aggregator: Fix calling into sleeping GPIO controllers (bsc#1012628). - NFS: Don't overfill uncached readdir pages (bsc#1012628). - NFS: Don't skip directory entries when doing uncached readdir (bsc#1012628). - NFS: Avoid duplicate uncached readdir calls on eof (bsc#1012628). - drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd (bsc#1012628). - misc: fastrpc: avoid double fput() on failed usercopy (bsc#1012628). - net: sparx5: Fix get_stat64 crash in tcpdump (bsc#1012628). - netfilter: nft_payload: don't allow th access for fragments (bsc#1012628). - netfilter: ctnetlink: disable helper autoassign (bsc#1012628). - arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133' (bsc#1012628). - arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator (bsc#1012628). - arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2 (bsc#1012628). - arm64: dts: meson-sm1-odroid: fix boot loop after reboot (bsc#1012628). - ixgbevf: Require large buffers for build_skb on 82599VF (bsc#1012628). - tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case (bsc#1012628). - net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP (bsc#1012628). - drm/panel: simple: Assign data from panel_dpi_probe() correctly (bsc#1012628). - s390/module: fix building test_modules_helpers.o with clang (bsc#1012628). - ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE (bsc#1012628). - gpiolib: Never return internal error codes to user space (bsc#1012628). - gpio: sifive: use the correct register to read output values (bsc#1012628). - fbcon: Avoid 'cap' set but not used warning (bsc#1012628). - SUNRPC: lock against ->sock changing during sysfs read (bsc#1012628). - gve: Recording rx queue before sending to napi (bsc#1012628). - bonding: pair enable_port with slave_arr_updates (bsc#1012628). - net: dsa: mv88e6xxx: don't use devres for mdiobus (bsc#1012628). - net: dsa: ar9331: register the mdiobus under devres (bsc#1012628). - net: dsa: bcm_sf2: don't use devres for mdiobus (bsc#1012628). - net: dsa: felix: don't use devres for mdiobus (bsc#1012628). - net: dsa: ocelot: seville: utilize of_mdiobus_register (bsc#1012628). - net: dsa: seville: register the mdiobus under devres (bsc#1012628). - net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding (bsc#1012628). - net: dsa: lantiq_gswip: don't use devres for mdiobus (bsc#1012628). - ibmvnic: don't release napi in __ibmvnic_open() (bsc#1012628). - net: ethernet: litex: Add the dependency on HAS_IOMEM (bsc#1012628). - ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path (bsc#1012628). - nfp: flower: fix ida_idx not being released (bsc#1012628). - net: do not keep the dst cache when uncloning an skb dst and its metadata (bsc#1012628). - net: fix a memleak when uncloning an skb dst and its metadata (bsc#1012628). - veth: fix races around rq->rx_notify_masked (bsc#1012628). - net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE (bsc#1012628). - tipc: rate limit warning for received illegal binding update (bsc#1012628). - net: amd-xgbe: disable interrupts during pci removal (bsc#1012628). - net: dsa: fix panic when DSA master device unbinds on shutdown (bsc#1012628). - drm/amd/pm: fix hwmon node of power1_label create issue (bsc#1012628). - mptcp: netlink: process IPv6 addrs in creating listening sockets (bsc#1012628). - dpaa2-eth: unregister the netdev before disconnecting from the PHY (bsc#1012628). - ice: fix an error code in ice_cfg_phy_fec() (bsc#1012628). - ice: fix IPIP and SIT TSO offload (bsc#1012628). - ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler (bsc#1012628). - ice: Avoid RTNL lock when re-creating auxiliary device (bsc#1012628). - net: mscc: ocelot: fix mutex lock error during ethtool stats read (bsc#1012628). - net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister (bsc#1012628). - vt_ioctl: fix array_index_nospec in vt_setactivate (bsc#1012628). - vt_ioctl: add array_index_nospec to VT_ACTIVATE (bsc#1012628). - n_tty: wake up poll(POLLRDNORM) on receiving data (bsc#1012628). - eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX (bsc#1012628). - usb: dwc2: drd: fix soft connect when gadget is unconfigured (bsc#1012628). - Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured" (bsc#1012628). - net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup (bsc#1012628). - usb: ulpi: Move of_node_put to ulpi_dev_release (bsc#1012628). - usb: ulpi: Call of_node_put correctly (bsc#1012628). - usb: dwc3: gadget: Prevent core from processing stale TRBs (bsc#1012628). - usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition (bsc#1012628). - USB: gadget: validate interface OS descriptor requests (bsc#1012628). - usb: gadget: rndis: check size of RNDIS_MSG_SET command (bsc#1012628). - usb: gadget: f_uac2: Define specific wTerminalType (bsc#1012628). - usb: raw-gadget: fix handling of dual-direction-capable endpoints (bsc#1012628). - USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 (bsc#1012628). - USB: serial: option: add ZTE MF286D modem (bsc#1012628). - USB: serial: ch341: add support for GW Instek USB2.0-Serial devices (bsc#1012628). - USB: serial: cp210x: add NCR Retail IO box id (bsc#1012628). - USB: serial: cp210x: add CPI Bulk Coin Recycler id (bsc#1012628). - speakup-dectlk: Restore pitch setting (bsc#1012628). - phy: ti: Fix missing sentinel for clk_div_table (bsc#1012628). - iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL (bsc#1012628). - fs/proc: task_mmu.c: don't read mapcount for migration entry (bsc#1012628). - mm: vmscan: remove deadlock due to throttling failing to make progress (bsc#1012628). - mm: memcg: synchronize objcg lists with a dedicated spinlock (bsc#1012628). - seccomp: Invalidate seccomp mode to catch death failures (bsc#1012628). - signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE (bsc#1012628). - s390/cio: verify the driver availability for path_event call (bsc#1012628). - bus: mhi: pci_generic: Add mru_default for Foxconn SDX55 (bsc#1012628). - bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W (bsc#1012628). - x86/sgx: Silence softlockup detection when releasing large enclaves (bsc#1012628). - Makefile.extrawarn: Move -Wunaligned-access to W=1 (bsc#1012628). - scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled (bsc#1012628). - scsi: lpfc: Reduce log messages seen after firmware download (bsc#1012628). - MIPS: octeon: Fix missed PTR->PTR_WD conversion (bsc#1012628). - arm64: dts: imx8mq: fix lcdif port node (bsc#1012628). - perf: Fix list corruption in perf_cgroup_switch() (bsc#1012628). - kconfig: fix missing fclose() on error paths (bsc#1012628). - docs/ABI: testing: aspeed-uart-routing: Escape asterisk (bsc#1012628). - iommu: Fix potential use-after-free during probe (bsc#1012628). - Update config files. - commit 3192082 - Refresh patches.suse/drm-i915-Workaround-broken-BIOS-DBUF-configuration-o.patch. Update upstream status. - commit 9ffab43 - Refresh patches.suse/drm-i915-Populate-pipe-dbuf-slices-more-accurately-d.patch. Update upstream status. - commit ae6fdf3 - Refresh patches.suse/drm-i915-Allow-join_mbus-cases-for-adlp-dbuf-configu.patch. Update upstream status. - commit d6e9958 - config: Disable CONFIG_READ_ONLY_THP_FOR_FS (bsc#1195774) - commit 4a5d464 - usb: gadget: clear related members when goto fail (CVE-2022-24958 bsc#1195905). - usb: gadget: don't release an existing dev->buf (CVE-2022-24958 bsc#1195905). - commit dedbf20 - ALSA: hda/realtek: Fix deadlock by COEF mutex (bsc#1195913). - ALSA: usb-audio: Don't abort resume upon errors (bsc#1195913). - ALSA: memalloc: invalidate SG pages before sync (bsc#1195913). - ALSA: memalloc: Fix dma_need_sync() checks (bsc#1195913). - commit 86181b2 - constraints: Also adjust disk requirement for x86 and s390. - commit 9719db0 - constraints: Increase disk space for aarch64 - commit 09c2882 - Linux 5.16.9 (bsc#1012628). - tipc: improve size validations for received domain records (bsc#1012628). - crypto: api - Move cryptomgr soft dependency into algapi (bsc#1012628). - ksmbd: fix SMB 3.11 posix extension mount failure (bsc#1012628). - KVM: s390: Return error on SIDA memop on normal guest (bsc#1012628). - moxart: fix potential use-after-free on remove path (bsc#1012628). - ata: libata-core: Fix ata_dev_config_cpr() (bsc#1012628). - commit 704dc30 - Revert "build initrd without systemd" (bsc#1195775) This reverts commit ef4c569b998635a9369390d4e9cfe3a922815c76. systemd is needed to at least mount /sys/kernel/security/ during apparmor build. - commit 5d1f5d2 - rpm/fdupes_relink: dups linking implementation in perl (bsc#1195709) - rpm/kernel-source.spec.in: use the above This is orders of magnitude faster. - commit 359854d - Update config files. Set CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y on i386. the rest to =n. Copied from master branch. - commit 224cad2 - Linux 5.16.8 (bsc#1012628). - drm/i915: Disable DSB usage for now (bsc#1012628). - selinux: fix double free of cond_list on error paths (bsc#1012628). - audit: improve audit queue handling when "audit=1" on cmdline (bsc#1012628). - ipc/sem: do not sleep with a spin lock held (bsc#1012628). - spi: stm32-qspi: Update spi registering (bsc#1012628). - ASoC: hdmi-codec: Fix OOB memory accesses (bsc#1012628). - ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() (bsc#1012628). - ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx() (bsc#1012628). - ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx() (bsc#1012628). - ALSA: usb-audio: Correct quirk for VF0770 (bsc#1012628). - ALSA: hda: Fix UAF of leds class devs at unbinding (bsc#1012628). - ALSA: hda: realtek: Fix race at concurrent COEF updates (bsc#1012628). - ALSA: hda/realtek: Add quirk for ASUS GU603 (bsc#1012628). - ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks (bsc#1012628). - ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset) (bsc#1012628). - ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows (bsc#1012628). - ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage (bsc#1012628). - btrfs: don't start transaction for scrub if the fs is mounted read-only (bsc#1012628). - btrfs: fix deadlock between quota disable and qgroup rescan worker (bsc#1012628). - btrfs: fix use-after-free after failure to create a snapshot (bsc#1012628). - Revert "fs/9p: search open fids first" (bsc#1012628). - drm/nouveau: fix off by one in BIOS boundary checking (bsc#1012628). - drm/i915/adlp: Fix TypeC PHY-ready status readout (bsc#1012628). - drm/amdgpu: fix a potential GPU hang on cyan skillfish (bsc#1012628). - drm/amd/pm: correct the MGpuFanBoost support for Beige Goby (bsc#1012628). - drm/amd/display: Update watermark values for DCN301 (bsc#1012628). - drm/amd/display: watermark latencies is not enough on DCN31 (bsc#1012628). - drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels (bsc#1012628). - nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts() (bsc#1012628). - mm/debug_vm_pgtable: remove pte entry from the page table (bsc#1012628). - mm/pgtable: define pte_index so that preprocessor could recognize it (bsc#1012628). - mm/kmemleak: avoid scanning potential huge holes (bsc#1012628). - block: bio-integrity: Advance seed correctly for larger interval sizes (bsc#1012628). - dma-buf: heaps: Fix potential spectre v1 gadget (bsc#1012628). - IB/hfi1: Fix panic with larger ipoib send_queue_size (bsc#1012628). - IB/hfi1: Fix alloc failure with larger txqueuelen (bsc#1012628). - IB/hfi1: Fix AIP early init panic (bsc#1012628). - Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)" (bsc#1012628). - Revert "fbcon: Disable accelerated scrolling" (bsc#1012628). - fbcon: Add option to enable legacy hardware acceleration (bsc#1012628). - mptcp: fix msk traversal in mptcp_nl_cmd_set_flags() (bsc#1012628). - Revert "ASoC: mediatek: Check for error clk pointer" (bsc#1012628). - RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode (bsc#1012628). - KVM: arm64: Avoid consuming a stale esr value when SError occur (bsc#1012628). - KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs (bsc#1012628). - arm64: Add Cortex-A510 CPU part definition (bsc#1012628). - RDMA/cma: Use correct address when leaving multicast group (bsc#1012628). - RDMA/ucma: Protect mc during concurrent multicast leaves (bsc#1012628). - RDMA/siw: Fix refcounting leak in siw_create_qp() (bsc#1012628). - IB/rdmavt: Validate remote_addr during loopback atomic tests (bsc#1012628). - RDMA/siw: Fix broken RDMA Read Fence/Resume logic (bsc#1012628). - RDMA/mlx4: Don't continue event handler after memory allocation failure (bsc#1012628). - ALSA: usb-audio: initialize variables that could ignore errors (bsc#1012628). - ALSA: hda: Fix signedness of sscanf() arguments (bsc#1012628). - ALSA: hda: Skip codec shutdown in case the codec is not registered (bsc#1012628). - iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() (bsc#1012628). - iommu/amd: Fix loop timeout issue in iommu_ga_log_enable() (bsc#1012628). - spi: bcm-qspi: check for valid cs before applying chip select (bsc#1012628). - spi: mediatek: Avoid NULL pointer crash in interrupt (bsc#1012628). - spi: meson-spicc: add IRQ check in meson_spicc_probe (bsc#1012628). - spi: uniphier: fix reference count leak in uniphier_spi_probe() (bsc#1012628). - IB/hfi1: Fix tstats alloc and dealloc (bsc#1012628). - IB/cm: Release previously acquired reference counter in the cm_id_priv (bsc#1012628). - net: ieee802154: hwsim: Ensure proper channel selection at probe time (bsc#1012628). - net: ieee802154: mcr20a: Fix lifs/sifs periods (bsc#1012628). - net: ieee802154: ca8210: Stop leaking skb's (bsc#1012628). - netfilter: nft_reject_bridge: Fix for missing reply from prerouting (bsc#1012628). - net: ieee802154: Return meaningful error codes from the netlink helpers (bsc#1012628). - net/smc: Forward wakeup to smc socket waitqueue after fallback (bsc#1012628). - net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request (bsc#1012628). - net: stmmac: properly handle with runtime pm in stmmac_dvr_remove() (bsc#1012628). - net: macsec: Fix offload support for NETDEV_UNREGISTER event (bsc#1012628). - net: macsec: Verify that send_sci is on when setting Tx sci explicitly (bsc#1012628). - net: stmmac: dump gmac4 DMA registers correctly (bsc#1012628). - net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work (bsc#1012628). - net: stmmac: ensure PTP time register reads are consistent (bsc#1012628). - drm: mxsfb: Fix NULL pointer dereference (bsc#1012628). - drm/kmb: Fix for build errors with Warray-bounds (bsc#1012628). - drm/i915/overlay: Prevent divide by zero bugs in scaling (bsc#1012628). - drm/i915: Lock timeline mutex directly in error path of eb_pin_timeline (bsc#1012628). - drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled (bsc#1012628). - ASoC: rt5682: Fix deadlock on resume (bsc#1012628). - ASoC: fsl: Add missing error handling in pcm030_fabric_probe (bsc#1012628). - ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes (bsc#1012628). - ASoC: simple-card: fix probe failure on platform component (bsc#1012628). - ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name (bsc#1012628). - ASoC: max9759: fix underflow in speaker_gain_control_put() (bsc#1012628). - ASoC: codecs: wcd938x: fix incorrect used of portid (bsc#1012628). - ASoC: codecs: lpass-rx-macro: fix sidetone register offsets (bsc#1012628). - ASoC: codecs: wcd938x: fix return value of mixer put function (bsc#1012628). - ASoC: qdsp6: q6apm-dai: only stop graphs that are started (bsc#1012628). - pinctrl: sunxi: Fix H616 I2S3 pin data (bsc#1012628). - pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line (bsc#1012628). - pinctrl: intel: fix unexpected interrupt (bsc#1012628). - pinctrl: bcm2835: Fix a few error paths (bsc#1012628). - btrfs: fix use of uninitialized variable at rm device ioctl (bsc#1012628). - scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe (bsc#1012628). - nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client (bsc#1012628). - gve: fix the wrong AdminQ buffer queue index check (bsc#1012628). - bpf: Use VM_MAP instead of VM_ALLOC for ringbuf (bsc#1012628). - selftests/exec: Remove pipe from TEST_GEN_FILES (bsc#1012628). - selftests: futex: Use variable MAKE instead of make (bsc#1012628). - tools/resolve_btfids: Do not print any commands when building silently (bsc#1012628). - e1000e: Separate ADP board type from TGP (bsc#1012628). - rtc: cmos: Evaluate century appropriate (bsc#1012628). - objtool: Fix truncated string warning (bsc#1012628). - kvm: add guest_state_{enter,exit}_irqoff() (bsc#1012628). - kvm/arm64: rework guest entry logic (bsc#1012628). - perf: Copy perf_event_attr::sig_data on modification (bsc#1012628). - perf stat: Fix display of grouped aliased events (bsc#1012628). - perf/x86/intel/pt: Fix crash with stop filters in single-range mode (bsc#1012628). - x86/perf: Default set FREEZE_ON_SMI for all (bsc#1012628). - EDAC/altera: Fix deferred probing (bsc#1012628). - EDAC/xgene: Fix deferred probing (bsc#1012628). - ext4: prevent used blocks from being allocated during fast commit replay (bsc#1012628). - ext4: modify the logic of ext4_mb_new_blocks_simple (bsc#1012628). - ext4: fix error handling in ext4_restore_inline_data() (bsc#1012628). - ext4: fix error handling in ext4_fc_record_modified_inode() (bsc#1012628). - ext4: fix incorrect type issue during replay_del_range (bsc#1012628). - net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY (bsc#1012628). - cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning (bsc#1012628). - tools include UAPI: Sync sound/asound.h copy with the kernel sources (bsc#1012628). - gpio: idt3243x: Fix an ignored error return from platform_get_irq() (bsc#1012628). - gpio: mpc8xxx: Fix an ignored error return from platform_get_irq() (bsc#1012628). - selftests: nft_concat_range: add test for reload with no element add/del (bsc#1012628). - selftests: netfilter: check stateless nat udp checksum fixup (bsc#1012628). - Update config files. - commit 1b44d21 - Refresh patches.suse/0001-lib-raid6-Use-strict-priority-ranking-for-pq-gen-ben.patch. - Refresh patches.suse/0001-lib-raid6-skip-benchmark-of-non-chosen-xor_syndrome-.patch. - Refresh patches.suse/cifs-fix-workstation_name-for-multiuser-mounts.patch. Update upstream status and move to sorted section. - commit 9ebef3e - drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL (bsc#1193640). - drm/i915: Populate pipe dbuf slices more accurately during readout (bsc#1193640). - drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration (bsc#1193640). - commit 0503f69 - Linux 5.16.7 (bsc#1012628). - Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" again (bsc#1012628). - Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" (bsc#1012628). - commit 37d59fa - Linux 5.16.6 (bsc#1012628). - ovl: fix NULL pointer dereference in copy up warning (bsc#1012628). - tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() (bsc#1012628). - tcp: fix mem under-charging with zerocopy sendmsg() (bsc#1012628). - af_packet: fix data-race in packet_setsockopt / packet_setsockopt (bsc#1012628). - e1000e: Handshake with CSME starts from ADL platforms (bsc#1012628). - cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask() (bsc#1012628). - bpf: Fix possible race in inc_misses_counter (bsc#1012628). - net: ipa: request IPA register values be retained (bsc#1012628). - rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() (bsc#1012628). - net: sched: fix use-after-free in tc_new_tfilter() (bsc#1012628). - fanotify: Fix stale file descriptor in copy_event_to_user() (bsc#1012628). - net: amd-xgbe: Fix skb data length underflow (bsc#1012628). - net: amd-xgbe: ensure to reset the tx_timer_active flag (bsc#1012628). - i40e: Fix reset path while removing the driver (bsc#1012628). - i40e: Fix reset bw limit when DCB enabled with 1 TC (bsc#1012628). - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback (bsc#1012628). - net/mlx5e: Avoid implicit modify hdr for decap drop rule (bsc#1012628). - net/mlx5: E-Switch, Fix uninitialized variable modact (bsc#1012628). - net/mlx5e: Fix broken SKB allocation in HW-GRO (bsc#1012628). - net/mlx5e: Fix wrong calculation of header index in HW_GRO (bsc#1012628). - net/mlx5e: Avoid field-overflowing memcpy() (bsc#1012628). - net/mlx5: Bridge, Fix devlink deadlock on net namespace deletion (bsc#1012628). - net/mlx5e: Don't treat small ceil values as unlimited in HTB offload (bsc#1012628). - net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE (bsc#1012628). - net/mlx5e: TC, Reject rules with forward and drop actions (bsc#1012628). - net/mlx5e: Fix module EEPROM query (bsc#1012628). - net/mlx5: Use del_timer_sync in fw reset flow of halting poll (bsc#1012628). - net/mlx5e: Fix handling of wrong devices during bond netevent (bsc#1012628). - net/mlx5: Bridge, ensure dev_name is null-terminated (bsc#1012628). - net/mlx5: Bridge, take rtnl lock in init error handler (bsc#1012628). - net/mlx5e: TC, Reject rules with drop and modify hdr action (bsc#1012628). - net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic (bsc#1012628). - net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic (bsc#1012628). - lockd: fix failure to cleanup client locks (bsc#1012628). - lockd: fix server crash on reboot of client holding lock (bsc#1012628). - ovl: don't fail copy up if no fileattr support on upper (bsc#1012628). - net: phy: Fix qca8081 with speeds lower than 2.5Gb/s (bsc#1012628). - Revert "mm/gup: small refactoring: simplify try_grab_page()" (bsc#1012628). - cgroup-v1: Require capabilities to set release_agent (bsc#1012628). - drm/vc4: hdmi: Make sure the device is powered with CEC (bsc#1012628). - net: ipa: prevent concurrent replenish (bsc#1012628). - net: ipa: use a bitmap for endpoint replenish_enabled (bsc#1012628). - selftests: mptcp: fix ipv6 routing setup (bsc#1012628). - PCI: pciehp: Fix infinite loop in IRQ handler upon power fault (bsc#1012628). - commit 1e2a324 - Refresh patches.suse/Input-elan_i2c-Add-deny-list-for-Lenovo-Yoga-Slim-7.patch Fix section mistmatch warning - commit 1f97ae0 ==== keylime ==== Subpackages: keylime-agent keylime-config keylime-firewalld keylime-registrar keylime-tpm_cert_store keylime-verifier python38-keylime - Change back agent_uuid to hostname - Set tpm_hash_alg to sha256 by default - Update version.diff patch to point to the correct version number - Fix issue with Tornado, when multiple workers are started * Add cloud_verifier_tornado-use-fork_processes.patch (bsc#1195605) ==== kgamma5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== khotkeys5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== kinfocenter5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Search in /usr/local/sbin:/usr/sbin:/sbin as fallback (kde#449792) - Drop patches, now upstream * 0001-Search-in-usr-local-sbin-usr-sbin-sbin-as-fallback.patch - Change patch to also search in /sbin: * Add 0001-Search-in-usr-local-sbin-usr-sbin-sbin-as-fallback.patch * Drop 0001-Search-in-usr-local-sbin-usr-sbin-as-fallback.patch * Rebase 0002-Look-for-binaries-in-Mesa-demos-path-as-well.patch - Add patch to actually find lscpi (kde#449792, boo#1195696): * 0001-Search-in-usr-local-sbin-usr-sbin-as-fallback.patch - ... and eglinfo (boo1195695): * 0002-Look-for-binaries-in-Mesa-demos-path-as-well.patch - Suggest Mesa-demo for eglinfo ==== kmenuedit5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== kscreen5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * KCM: Workaround unknown Qt issue that causes the revert dialog to be invisible (kde#449560) * [kcm] Only enable revert action when revert sheet is open (kde#449931) - Add Requires: xrdb since it's executed when setting the global dpi. ==== kscreenlocker ==== Version update (5.24.0 -> 5.24.1) Subpackages: libKScreenLocker5 - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== ksystemstats5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * CPU Plugin: Prevent integer overflow of total usage (kde#448626) ==== kuserfeedback ==== Version update (1.0.0 -> 1.2.0) Subpackages: kuserfeedback-imports libKUserFeedbackCore1 libKUserFeedbackWidgets1 - Update to 1.2.0 * bump version for new release * opengl source: Do not crash if we could not make our context current * Add Linux Qt6 CI * Make UserFeedbackConsole build with Qt6 * Fix linking libKUserFeedbackCommon.a * Build with C++17 * Build docs on Qt6 too * Adapt CMake code to make it build with Qt6 * Add auto generated files to .gitignore * Add FreeBSD CI * Add Android CI * Enable Linux CI * Fix typos found by codespell * Qt 6: Replace calls to removed QDateTime(QDate) constructor * Qt 6: Fix issues caused by size() returning a qsizetype * Qt 6: Remove QNetworkRequest::FollowRedirectsAttribute * Replace declarations of QVector, QStringList * CMake: Allow building with Qt 6 * Qt 6: Replace QMap>QVariant ... * Qt 6: Fix signature of methods for QQmlListProperty * Fix cmake warning * Port away from ECMSetupVersion's deprecated *_VERSION_STRING CMake variable * Make the survey expression variant comparison work with Qt6 as well * Use non-deprecated QStandardPaths enum values * Make QString to QUuid conversion explicit * fix Windows compile, no unistd.h needed * Update historical links to cgit.kde.org. * Check for invalid JSON first, then for empty objects * Don't record telemetry-less survey queries, that just produces empty rows * Fix php unit tests * Also record the device pixel ratio * [server] Convert JSON fetch to stream data * Provider: add API to restore default user-visible settings * Always show the "View previously submitted data..." link * Add appdata file for UserFeedbackConsole * KUserFeedback: Convert license headers to SPDX expressions * Fix area charts with Qt 5.14 * Use KDE_INSTALL_LOGGINGCATEGORIESDIR with ECM >= 5.58 * Make it compile without deprecated method - Update kuserfeedback.keyring ==== kwayland-integration ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== kwayland-server ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Add missing errno.h include ==== kwin5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * backends/drm: fix legacy dpms * utils/serviceutils: compare executablePath against canonical path of exec fields in .desktops * x11: Fix shrinking window size after toggling no border multiple times (kde#449988) * wayland: Fix maximize mode propagation to decoration (kde#450053) * effects/overview: Add translation domain * effects: Extract messages from QML files * inputmethod: Also open the inputm method panel with a pen (kde#449888) * Implement services in our QPA (kde#446144) * Don't force QT_QPA_PLATFORM=wayland (kde#450000) * Schedule workspace repaint when window leaves current desktop (kde#444172) * Initialize the KSldApp after we connect * Fix loading of effect if plugin defined X-KDE-Library (kde#449881) * wayland: Fix mispositioned decoration tooltips (kde#432860) * Make openGL context current when recording frame triggered by cursor move (kde#448162) * effects/DesktopGrid: use delta, not absolute time for MotionManager (kde#443971) * Fix window decoration quads in OpenGL scene * wayland: Make the launcher not restart kwin_wayland if it crashes at shutdown * Add missing errno.h include * Avoid mixing current and next state (kde#449541) * effects/overview: Hide selection rect during dnd (kde#448573) * effects/overview: Don't show minimized windows in desktop thumbnails (kde#448850) * Fix mouse pointer disappearing after using zoom effect on X11 (kde#448537) * effects/fallapart: Avoid animating windows while there's a fullscreen effect (kde#449844) * effects/scale: Make it not grab open and close roles (kde#449832) * backends/drm: ignore modifier env var if modifiers are not supported * kcm/screenedge: Fix default value for TabBox.BorderActivate option (kde#449720) - Drop patches, now upstream: * 43caf2539357a1f9d5b2668a8eff151517377a7e.patch - Add 43caf2539357a1f9d5b2668a8eff151517377a7e.patch: Fix mouse pointer disappearing after using zoom effect on X11 (kde#448537, boo#1195865) ==== kwrited5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== layer-shell-qt ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== lcms2 ==== Version update (2.13 -> 2.13.1) - update to 2.13.1: * Fix a bug on grayscale that made printing gray on white paper * Added support for premultiplied alpha * tifficc can now handle alpha channels, both unassociated and premultiplied * Better documentation * CGATS parser can now deal with very long strings * Added Projects for Visual Studio 2020 * Travis CI discontinued, GitHub actions used instead * Added a very preliminary meson build script (thanks to xclaesse) * Added ARM64 target to visual studio 2019 (thanks to gaborkertesz-linaro) * Added thread safe code to get time * Added automatic linear space detection * Added cmsGetStageContextID function * Added cmsDetectRGBProfileGamma * configure now accepts --without-fastfloat to turn plugin off * autogen.sh has now a --distclean toggle to get rid of all autotools generated files * Checked to work on STM32 Cortex-A, Cortex-M families * Bug & typos fixing (thanks to many reporters and contributors) * Fixed mem leaks and out-of bounds accesses as reported by fuzzer ==== libapparmor ==== Version update (3.0.3 -> 3.0.4) - update to AppArmor 3.0.4 - various fixes in profiles, abstractions, apparmor_parser and utils (some of them were already included as patches) - add support for mctp address family - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_3.0.4 for the full upstream changelog - remove upstream(ed) patches: - aa-notify-more-arch-mr809.diff - ruby-3.1-build-fix.diff - add-samba-bgqd.diff - openssl-engdef-mr818.diff - profiles-python-3.10-mr783.diff - update-samba-abstractions-ldb2.diff - refresh patches: - apparmor-samba-include-permissions-for-shares.diff - ruby-2_0-mkmf-destdir.patch ==== libgpg-error ==== Version update (1.43 -> 1.44) - Update to 1.44: * Fix dependency to gpg-error-config-test.sh. * Run the posix locking test only on supported platforms. * Detect Linux systems using musl. * Fix gpg-error-config-test for PKG_CONFIG_LIBDIR. * Fix returning of option attributes for options with args. * Add Turkish translations. ==== libkdecoration2 ==== Version update (5.24.0 -> 5.24.1) Subpackages: libkdecorations2-5 libkdecorations2private9 - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== libkscreen2 ==== Version update (5.24.0 -> 5.24.1) Subpackages: libKF5Screen7 libkscreen2-plugin - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== libksysguard5 ==== Version update (5.24.0 -> 5.24.1) Subpackages: ksysguardsystemstats-data libKSysGuardSystemStats1 libksysguard5-imports - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Fix showing icons in KSysguard ==== libnetfilter_conntrack ==== Version update (1.0.8 -> 1.0.9) - Update to release 1.0.9 * This release comes with the new nfct_nlmsg_build_filter() function that allows to add metadata for kernel-side filtering of conntrack entries during conntrack table dump. * The nfct_query() API supports the new NFCT_Q_FLUSH_FILTER argument, it allows to flush only IPv6 or IPv4 entries from the connection tracking table. ==== libnvme ==== Version update (1.0~2 -> 1.0~3) - Update to version v1.0-rc3: * Properly create manuals/documentation * Fix memleaks in __nvme_free_ns() and nvme_scan_subsystem() * nvme: get log domain id included in Log Specific Identifier * nvme: Add nulbaf(Number of Unique Capability LBA Formats) field on nvmd_id_ns * ioctl: Add identify ioctl for CNS 09h, 0Ah * nvme: Add Enhanced Controller Meta Data(FID: 0x7D) * nvme: Add Supported Capacity Configuration List log page(LID: 0x11) * tree: do not set dhchap_key to 'none' * tree: restart controller lookup * tree: fixup memory leak in nvme_scan_ctrl() * Rename nvme_path_get_subsystem() * Remove nvme_reset_topology() - Use precompiled documentation instead regenerating it ==== libpeas ==== - Add upstream bug fix patches: + a9d2ba590641d832dcf6b97184687b6eb424c00f.patch: icons: Update icon licenses + dfc763c16c0ce66a180ccb13205f1ca9666278a8.patch: icons: Correct icon licenses again + 2a976339f444d70f10949901a6ee2b1f8ccb24b6.patch: Build: add embedded-resources.h to libembedded_dep - Use ldconfig_scriptlets macro for post(un) handling. - Update our Supplements to current standard. - Stop removing no longer exisiting la files, not present after the switch to meson build system. - Stop packaging the demo files/sub-package, pass demos=false to meson, and add libpeas-demo Obsolets to main lib. - Remove all traces of already disabled via bcond libpeas-loader-python sub-package, there is no chance we will package that again. ==== libproxy ==== - Drop gconf2-devel BuildRequires: libproxy was ported to gsettings quite some time ago. - Update our Supplements to current standard. ==== libqmi ==== Version update (1.30.2 -> 1.30.4) - update to 1.30.4: * * meson: switch to use the new python module in meson. * * meson: added a new boolean 'man' option in the meson setup to explicitly enable or disable building the man pages. * * meson: removed the option to detect if rmnet is supported. * * meson: multiple updates to use newer meson features like install_dir(), install_mode() or summary(). * * meson: options 'mbim_qmux' and 'qrtr' are enabled by default and must be explicitly disabled if they're not needed, there is no attempt to autodetect whether they can be enabled or not. * qmi-proxy: * * Remove assert when attempting to close ghost device. * qmi-firmware-update: * * Use defaults if FLASH variables not reported, enabling support to flash the new Sierra Wireless EM9190 and EM9191 modules. * Several other minor improvements and fixes. ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 - Update patch after it was merged to dev upstream and fix another place missed in the first version (boo#1195386, CVE-2022-23853): * 0001-QProcess-Unix-ensure-we-don-t-accidentally-execute-s.patch ==== librsvg ==== Version update (2.52.5 -> 2.52.6) Subpackages: gdk-pixbuf-loader-rsvg librsvg-2-2 rsvg-thumbnailer typelib-1_0-Rsvg-2_0 - Update to version 2.52.6: + Fix incorrect text rendering when text has different scales in the X/Y axes. This regressed after librsvg 2.52.5, when Pango had to revert its fix for the same bug. Now librsvg renders all text as paths, and does the scaling itself. Please file a bug if you have evidence that this presents a performance problem for you. ==== libsemanage ==== Subpackages: libsemanage-conf libsemanage2 - Drop Buildrequires for libustr-devel, not needed anymore ==== liburing ==== - add explicit liburing2-devel alias to reflect SLE/LEAP 15.4+ naming (bsc#1193522) ==== libzypp ==== Version update (17.29.3 -> 17.29.4) - Fix handling of redirected command in-/output (bsc#1195326) This fixes delays at the end of zypper operations, where zypper unintentionally waits for appdata plugin scripts to complete. - version 17.29.4 (22) ==== llvm13 ==== - Add SUSE_Backports_policy-SLE_conflict to rpmlintrc, we're deliberately conflicting with SLE here to offer a newer version than what SUSE wants to support. (https://code.opensuse.org/leap/features/issue/55) ==== milou5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Avoid sorting old results based on new query input string ==== multipath-tools ==== Version update (0.8.8+45+suse.628d603e -> 0.8.8+64+suse.f265f7e0) Subpackages: kpartx libmpath0 - Update to version 0.8.8+64+suse.f265f7e0: * libmultipath: fix printing native nvme multipath topology (bsc#1196011) * libmultipath: add %L path wildcard for 64-bit hex LUN * libmultipath: support host adapter name lookup for s390x ccw bus - Update to version 0.8.8+60+suse.4c5922cb: * multipathd: add suppport for FC Fabric Performance Impact Notifications (FPIN) (bsc#1195506) - Version 0.8.8+57+suse.dfb672fe * kpartx.rules: skip MD devices (bsc#1195644) * libmultipath: hwtable: use ALUA for all LIO targets (bsc#1195649) * multipathd.service: drop ExecStartPre for loading dm-multipath (bsc#1195397) ==== mutter ==== Version update (41.3 -> 41.4) - Update to version 41.4: + Fix DND between X11 and wayland clients. + Fix resetting idle time on lid open. + wayland/gtk: Only perform allowed titlebar gestures. + Place popups on the same monitor as the anchor rect. + Fix wrong resizes of some clients on focus changes. + Misc. bug fixes. + Fixed crashes. + Updated translations. - Add 0002-Drop-CI-test-setup-that-needs-catchsegv.patch: Fix build with glibc 2.35 and newer. ==== nvme-cli ==== Version update (2.0~2 -> 2.0~3) - Update to version v2.0-rc3: * nvme-print: Fix json output for list-subsys * nvme: Allow --verbose flag to increase log level * Added telemetry log fetch support for SN810, SN530 and SN740 series NVMe SSDs through wdc vs-internal-log command * nvmf: Remove --matching from systemd service file (bsc#1195665) * nvme: Fix --force flag inversion (bsc#1195637) * nvme: Add support for data area 4 to get-telemetry-log * nvme: Add Supported Capacity Configuration List log page(LID: 0x11) * nvme: Add Enhanced Controller Meta Data(FID: 0x7D) * nvme-print: Add NVME_FEAT_FID_ENH_CTRL_METADATA to nvme_feature_to_string * nvme-print: remove unused nvme_show_id_ctrl function * nvme: Add nvm-id-ns-lba-format(CNS 0Ah) command from TP4095 * nvme: Add NVM Command Set specific identify namespace command * nvme: Add id-ns-lba-format(CNS 09h) command from TP4095 * nvme: Add nulbaf(Number of Unique Capability LBA Formats) field on nvmd_id_ns - Include precompiled documentation ==== open-iscsi ==== Subpackages: iscsiuio libopeniscsiusr0_2_0 - Updated to latest upstream 2.1.6 as 2.1.6-suse, which contains bug fixes and cleanups. See the Changelog for more details. ==== openexr ==== Version update (3.1.3 -> 3.1.4) Subpackages: libIex-3_1-30 libIlmThread-3_1-30 libOpenEXR-3_1-30 - update to 3.1.4 (bsc#1194333): * Several bug fixes to properly reject invalid input upon read * A check to enable SSE2 when building with Visual Studio * A check to fix building with VisualStudio on ARM64 * Update the automatically-downloaded version of Imath to v3.1.4 * Miscellaneous documentation improvements - drop openexr-CVE-2021-45942.patch (upstream) ==== openssl-1_1 ==== Subpackages: libopenssl1_1 - Pull libopenssl-1_1 when updating openssl-1_1 with the same version. [bsc#1195792] - FIPS: Fix function and reason error codes [bsc#1182959] * Add openssl-1_1-FIPS-fix-error-reason-codes.patch ==== openvpn ==== - Fix license tag in spec file. ==== pam-config ==== Version update (1.5 -> 1.6) - Update to Version 1.6 - Create /etc/pam.d if not there - Support file option of pam_pwhistory ==== pango ==== Version update (1.50.3 -> 1.50.4) Subpackages: libpango-1_0-0 typelib-1_0-Pango-1_0 - Update to version 1.50.4: + Tweak synthetic space size. + itemize: Try harder to avoid NULL fonts. + docs: Some additions. + Pass synthetic slant to harfbuzz. + Make sloped carets work with uneven scales. + Fix serialiation on arm. + Avoid an uninitialized variable warning. + Reinstate previous behavior of pango_attr_list_splice. + Deprecated pango_coverage_ref/unref. + Fix serialization on non-glibc systems. + Fix allow-breaks handling. ==== patterns-base ==== Subpackages: patterns-base-base patterns-base-bootloader patterns-base-minimal_base patterns-base-x11 - No longer recommend apparmor pattern by enhanced_base: installations using YaST have the LSM selected during installation. Other setups might just as well pick SELinux. ==== patterns-gnome ==== Subpackages: patterns-gnome-gnome_basic patterns-gnome-gnome_basis - Drop gnome-documents Recommends: Package is archived upstream. - Recommend the gnome_games pattern by gnome_x11 instead of the generic games pattern. ==== patterns-kde ==== Version update (20220203 -> 20220215) - Add missing recommends to the Qt5 devel pattern. (boo#1192133) ==== plasma-browser-integration ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== plasma-nm5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== plasma5-addons ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * [applets/notes] Fix drag-and-drop focus stealing (kde#449711) ==== plasma5-desktop ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * attica-kde: Allow it to use HTTP2 ==== plasma5-integration ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Gracefully handle invalid color scheme setting (kde#449613) ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE sddm-theme-openSUSE - Update to 5.24.1 ==== plasma5-pa ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 - Drop conditionals for no longer supported versions of openSUSE. Following this; drop pkgconfig(gconf-2.0) BuildRequires and (pulseaudio-module-gconf if pulseaudio) Recommends, and conditional cmake_kf5 call. Pulseaudio dropped support for gconf in version 15. ==== plasma5-workspace ==== Version update (5.24.0 -> 5.24.1) Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-libs xembedsniproxy - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Move to runtime check of valid font DPI (kde#449918) * applets/battery: adjust show/hide conditions for charge limits (kde#435931) * applets/systemtray: fix SNI context menu usage without libappindicator (kde#449870) * applets/notifications: Increase implicit size of standalone popup (kde#448383) * applets-digital/clock: Add workaround for QTBUG-83890 (kde#448387) * Clean up "empty" mimeType containg only whitespaces * dataengines/apps: Use KIO::ApplicationLauncherJob for starting KService * [containmentactions/applauncher] Use ApplicationLauncherJob instead of OpenUrlJob (kde#449900) * Desktop: Still show services with nodisplay=true set (kde#449243) * appstream runner: De-duplicate results from multiple sources (kde#448619) * Fix ksplash always using default theme. (kde#446966) * kcms/users: Fix missing template arguments before reply in FingerprintModel * De-duplicate 'Uninstall or manage addons' option in the context menu of Kickoff (kde#448564) ==== polkit-kde-agent-5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - No code changes since 5.24.0 ==== powerdevil5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * Support hardware with only one charging threshold, not both (kde#449997) ==== pulseaudio ==== Subpackages: libpulse-mainloop-glib0 libpulse0 pulseaudio-setup - As we now have gstreamer dependencies in place, pass gstreamer=enabled to meson, enable the features. - Enable GStreamer support in Pulseaudio. This allows to use Bluetooth Headsets with LDAC or OpenAptX codec when available. Add pkgconfig(gstreamer-1.0), pkgconfig(gstreamer-app-1.0) and pkgconfig(gstreamer-rtp-1.0) BuildRequires. - Drop unneeded nor used pkgconfig(gconf-2.0) BuildRequires: gconf support was dropped upstream in version 15. ==== python-alembic ==== Version update (1.7.5 -> 1.7.6) - update to 1.7.6: * Add a new command alembic ensure_version, which will ensure that the Alembic version table is present in the target database, but does not alter its contents. * Fixed regression where usage of a with_variant() datatype in conjunction with the existing_type option of op.alter_column() under batch mode would lead to an internal exception. * Implemented support for recognizing and rendering SQLAlchemy ?variant? types going forward into SQLAlchemy 2.0, where the architecture of ?variant? datatypes will be changing. * Added a rule to the MySQL impl so that the translation between JSON / LONGTEXT is accommodated by autogenerate, treating LONGTEXT from the server as equivalent to an existing JSON in the model. * Removed a warning raised by SQLAlchemy when dropping constraints on MSSQL regarding statement caching. ==== python-charset-normalizer ==== Version update (2.0.10 -> 2.0.12) - update to 2.0.12: * ASCII miss-detection on rare cases (PR #170) * Explicit support for Python 3.11 (PR #164) * The logging behavior have been completely reviewed, now using only TRACE and DEBUG levels ==== python-cryptography ==== - split tests in a multibuild variant to optimize rebuild time a bit ==== python-pandas ==== Version update (1.4.0 -> 1.4.1) - update to version 1.4.1: * Fixed regressions + Regression in Series.mask() with inplace=True and PeriodDtype and an incompatible other coercing to a common dtype instead of raising (GH45546) + Regression in assert_frame_equal() not respecting check_flags=False (GH45554) + Regression in DataFrame.loc() raising ValueError when indexing (getting values) on a MultiIndex with one level (GH45779) + Regression in Series.fillna() with downcast=False incorrectly downcasting object dtype (GH45603) + Regression in api.types.is_bool_dtype() raising an AttributeError when evaluating a categorical Series (GH45615) + Regression in DataFrame.iat() setting values leading to not propagating correctly in subsequent lookups (GH45684) + Regression when setting values with DataFrame.loc() losing Index name if DataFrame was empty before (GH45621) + Regression in join() with overlapping IntervalIndex raising an InvalidIndexError (GH45661) + Regression when setting values with Series.loc() raising with all False indexer and Series on the right hand side (GH45778) + Regression in read_sql() with a DBAPI2 connection that is not an instance of sqlite3.Connection incorrectly requiring SQLAlchemy be installed (GH45660) + Regression in DateOffset when constructing with an integer argument with no keywords (e.g. pd.DateOffset(n)) would behave like datetime.timedelta(days=0) (GH45643, GH45890) * Bug fixes + Fixed segfault in DataFrame.to_json() when dumping tz-aware datetimes in Python 3.10 (GH42130) + Stopped emitting unnecessary FutureWarning in DataFrame.sort_values() with sparse columns (GH45618) + Fixed window aggregations in DataFrame.rolling() and Series.rolling() to skip over unused elements (GH45647) + Fixed builtin highlighters in Styler to be responsive to NA with nullable dtypes (GH45804) + Bug in apply() with axis=1 raising an erroneous ValueError (GH45912) * Other + Reverted performance speedup of DataFrame.corr() for method=pearson to fix precision regression (GH45640, GH42761) ==== python-pyOpenSSL ==== Version update (21.0.0 -> 22.0.0) - update to 22.0.0: - Drop support for Python 2.7. - The minimum ``cryptography`` version is now 35.0. - Expose wrappers for some `DTLS <https://en.wikipedia.org/wiki/Datagram_Transport_Layer_Security>`_ primitives. - drop check_inv_ALPN_lists.patch: upstream ==== python-pycups ==== - spec-cleaner ==== python-pyparsing ==== Version update (3.0.6 -> 3.0.7) - specfile: * update copyright year - update to version 3.0.7: * Fixed bug #345, in which delimitedList changed expressions in place using expr.streamline(). Reported by Kim Gräsman, thanks! * Fixed bug #346, when a string of word characters was passed to WordStart or WordEnd instead of just taking the default value. Originally posted as a question by Parag on StackOverflow, good catch! * Fixed bug #350, in which White expressions could fail to match due to unintended whitespace-skipping. Reported by Fu Hanxi, thank you! * Fixed bug #355, when a QuotedString is defined with characters in its quoteChar string containing regex-significant characters such as ., *, ?, [, ], etc. * Fixed bug in ParserElement.run_tests where comments would be displayed using with_line_numbers. * Added optional "min" and "max" arguments to `delimited_list`. PR submitted by Marius, thanks! * Added new API change note in `whats_new_in_pyparsing_3_0_0`, regarding a bug fix in the `bool()` behavior of `ParseResults`. * Prior to pyparsing 3.0.x, the `ParseResults` class implementation of `__bool__` would return `False` if the `ParseResults` item list was empty, even if it contained named results. In 3.0.0 and later, `ParseResults` will return `True` if either the item list is not empty *or* if the named results dict is not empty. * Minor enhancement to Word generation of internal regular expression, to emit consecutive characters in range, such as "ab", as "ab", not "a-b". * Fixed character ranges for search terms using non-Western characters in booleansearchparser, PR submitted by tc-yu, nice work! * Additional type annotations on public methods. ==== python-semanage ==== - Drop Buildrequires for libustr-devel, not needed anymore ==== python-setuptools ==== Version update (57.4.0 -> 58.3.0) - update to 58.3.0: * ``setup.py install`` and ``easy_install`` commands are now officially deprecated. Use other standards-based installers (like pip) and builders (like build). Workloads reliant on this behavior should pin to this major version of Setuptools. * #1988: Deprecated the ``bdist_rpm`` command. * #2785: Replace confirparser's readfp with read_file, deprecated since Python 3.2. * #2823: Officially deprecated support for ``setup_requires``. Users are encouraged instead to migrate to PEP 518 ``build-system.requires`` in ``pyproject.toml``. Users reliant on ``setup_requires`` should consider pinning to this major version to avoid disruption. * #2762: Changed codecov.yml to configure the threshold to be lower * #2757: Add windows arm64 launchers for scripts generated by easy_install. * #2800: Added ``--owner`` and ``--group`` options to the ``sdist`` command, for specifying file ownership within the produced tarball (similarly to the corresponding distutils ``sdist`` options). * #2792: Document how the legacy and non-legacy versions are compared, and reference to the `PEP 440 <https://www.python.org/dev/peps/pep-0440/>`_ scheme. * #2773: Retain case in setup.cfg during sdist. * #2777: Build does not fail fast when ``use_2to3`` is supplied but set to a false value. * #2769: Build now fails fast when ``use_2to3`` is supplied. * #2765: In Distribution.finalize_options, suppress known removed entry points to avoid issues with older Setuptools. * #2086: Removed support for 2to3 during builds. Projects should port to a unified codebase or pin to an older version of Setuptools using PEP 518 build-requires. * #2712: Added implicit globbing support for `[options.data_files]` values. * #2737: fix various syntax and style errors in code snippets in docs ==== rpm-config-SUSE ==== Version update (0.g93 -> 0.g96) - Update to version 0.g96: * changes * Avoid bash specific construct ==== selinux-policy ==== Subpackages: selinux-policy-targeted - Updated fix_cron.patch. Adjust labeling for at (bsc#1195683) - Fix bitlbee runtime directory (bsc#1193230) * add fix_bitlbee.patch ==== sg3_utils ==== Version update (1.47+2.388b767 -> 1.47+3.adb7276) Subpackages: libsgutils2-1_47-2 - Update to version 1.47+3.adb7276: * rescan-scsi-bus.sh: fix garbled output (bsc#1195621) ==== spice-vdagent ==== Version update (0.21.0 -> 0.22.1) - Update to version 0.22.1. Features and Issues addressed: * !40 - Handle side mouse buttons * !39 - Set retry limit to connect to vdagentd and improve logging error * !35 - Fix deprecation warning * !37 - Provide systemd spice-vdagent.service Do not process X11 events in vdagent_x11_create Drop upstream signature file as having "No public key" - Added hardening to systemd service(s) (bsc#1181400). Added patch(es): * harden_spice-vdagentd.service.patch ==== sssd ==== Version update (2.6.2 -> 2.6.3) Subpackages: libsss_certmap0 libsss_idmap0 libsss_nss_idmap0 sssd-krb5-common sssd-ldap - Remove caches only when performing a package downgrade. The sssd daemon takes care of upgrading the database format when necessary (bsc#1195552) - Update to release 2.6.3 * A regression introduced in sssd-2.6.2 in the IPA provider that prevented users from login was fixed. Access control always denied access because the selinux_child returned an unexpected reply. * A critical regression that prevented authentication of users via AD and IPA providers was fixed. LDAP port was reused for Kerberos communication and this provider would send incomprehensible information to this port. * When authenticating AD users, backtrace was triggered even though everything was working correctly. This was caused by a search in the global catalog. Servers from the global catalog are filtered out of the list before writing the KDC info file. With this fix, SSSD does not attempt to write to the KDC info file when performing a GC lookup. ==== sudo ==== - Restrict use of sudo -U other -l to people who have permission to run commands as that user (bsc#1181703, jsc#SLE-22569) * feature-upstream-restrict-sudo-U-other-l.patch ==== systemd ==== Subpackages: libsystemd0 libudev1 udev - Drop enablement symlink migration support of SysV init scripts And let's finish reducing the support of SysV init scripts to its minimum. - spec: fix dependencies for mini variants Make sure that all mini variants won't be installed in real systems and won't be involved when building medias with kiwi. Note that sub-packages that requires systemd (such as udev) don't need any special treatment since the specific deps are inherited from the main (mini) package. - spec: simplify systemd-mini-doc dependencies by assuming that the doc sub-package can't be a build requirement for other packages. - spec: libsystemd-mini and libudev-mini need to provide libsystemd and libudev respectively - Rename systemd-sysvinit into systemd-sysvcompat systemd-sysvinit was probably provided to allow systems to switch from sysvinit to systemd by overwriting /sbin/init with a link to systemd. But this isn't very useful anymore due to the fact that sysvinit is not supported since several years. Therefore the subpackage contains now the files needed to keep backward compatibility with SysV init scripts (most notably sysv-generator) and has been renamed accordingly. The few files that are not specific to sysvinit (such as /bin/init) have been moved to the main package. Normally this new subpackage shouldn't be needed (since all packages use systemd unit files) unless a 3rd party application is installed and still relies on SysV init scripts. - systemd.spec: explicitely turn on/off build options Hence a feature can't be accidentally turned on/off because its dep is pulled in or removed due to another feature being turned on/off. ==== systemd-rpm-macros ==== Version update (15 -> 16) - Bump to version 16 - Drop enablement symlink migration support of SysV init scripts This was announced here: https://lists.opensuse.org/archives/list/factory@lists.opensuse.org/thread/3... ==== systemsettings5 ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * fixup! app/SettingsBase: Only load current view on startup * app/SettingsBase: Show the main window before QML component is loaded * app/SettingsBase: Only load current view on startup ==== sysuser-tools ==== - invoke bash for bash scripts (bsc#1195391) ==== u-boot-rpiarm64 ==== Subpackages: u-boot-rpiarm64-doc - Add nanopc-t4-rk3399 and nanopi-m4b-rk3399 flavor ==== udisks2 ==== Subpackages: libudisks2-0 - Drop gtk-doc BuildRequires, and pass disable-gtk-doc to configure, the included gtk-docs are fine, we do not need to build them ourselves. ==== vim ==== Version update (8.2.4286 -> 8.2.4375) Subpackages: vim-data-common vim-small - Updated to version 8.2.4375, fixes the following problems * Vim9: strict type checking after copy() and deepcopy(). * Cannot assign empty list with any list type to variable with specific list type. * Preprocessor indents are inconsistent. * Warnings reported by MSVC. * Error number used twice. * Test fails. * Vim9: when copying a list it gets type list<any> even when the original list did not have a type. * Vim9: concatenating two lists may result in wrong type. * Vim9: not all code covered by tests. * Vim9: not all code covered by tests. * Divide by zero with huge tabstop value. * SafeState autocommand interferes with debugging. * Cannot build tiny version. (Tony Mechelynck) * Vim9: type error for copy of dict. * Vim9: return type of getline() is too strict. * A few messages should not be translated. * Vim9: slice() makes a copy but doesn't change the type. * Tex filetype detection fails. * No test for fixed perl filetype check. * A few more messages should not be translated. * Vim9: cannot list autoload function. * Vim9: crash when using a partial in the wrong context. * Vim9: constant list and dict get a declaration type other than "any". * Vim9: changing script variable type not caught at compile time. * No error for using :vim9script in a :def function. * Vim9: cannot change type of list after making a slice. * Test fails where lines are skipped. * Put in Visual mode not fully tested. * Various comment and indent mistakes, returning wrong zero. * :put does not work properly in compiled function. (John Beckett) * Athena and Motif: when maximized scrollbar position is wrong. * Vim9: crash when using a funcref to a closure. * Vim9: crash when using funcref with closure. * Vim9: nested function name can start with "_". * Vim9: script-local function name can start with "_". * 'wildmenu' only shows few matches. * "o" and "O" copying comment not sufficiently tested. * May end up with no current buffer. * Command line complete matches cleard when typing character. (Dominique Pellé) * No support for end line number and column in 'errorformat'. * Vim9: no error if script imports itself. * Vim9: no test for existing script variable in block. * Vim9: incomplete test for existing script variable in block. * cstack not always passed to where it is needed. * Command line popup menu not positioned correctly. * No autocommand event triggered before changing directory. (Ronnie Magatti) * Using :filter for :scriptnames does not work. (Ben Jackson) * Part of condition is always true. * An error from an expression mapping messes up the display. * CTRL-A does not work properly with the cmdline popup menu. * Command line not redrawn when finishing popup menu and the screen has scrolled up. * CI will soon switch to other windows version. * When reloading not all properties are detected. * <amatch> is expanded like a file name for DirChangedPre. * A custom statusline may cause Esc to work like Enter on the command line when the popup menu is displayed. * In some build setups UNUSED is not defined. * "legacy exe cmd" does not do what one would expect. * FEAT_GUI_ENABLED defined but never used. * No coverage is measured on MS-Windows CI. * ReScript files are not recognized. * CI does not use the latest Lua and Python. * Dynamic loading of libsodium not handled properly. * Unnecessary call to check_colorcolumn(). * Command line completion functions are very long. * sticky command modifiers are too sticky. * Vim9: line number of exception is not set. * crash when repeatedly using :retab. * Vim9: allowing use of "s:" leads to inconsistencies. * Vim9: some tests fail. * :retab may allocate too much memory. * sticky command modifiers are too sticky. * Not enough tests for command line completion. * Calling in_vim9script() multiple times. * Amiga: a few compiler warnings. * Redundant #ifdef argument. * MS-Windows: libsodium.dll not included with the installer. * Vim9: can create a script variable from a legacy function. * Filetype detection from file contents is in legacy script. * Expression test fails. * Unreachable code. * ctx_imports is not used. ==== webkit2gtk3 ==== Version update (2.34.4 -> 2.34.6) Subpackages: libjavascriptcoregtk-4_1-0 libwebkit2gtk-4_1-0 webkit2gtk-4_1-injected-bundles - Update to version 2.34.6: + Fix accessibility not working when the Bubblewrap sandbox is enabled. + Fix rendering of scrollbars when overlay scrollbars are disabled. + Fix the build when the X11 support is disabled. + Fix the build in a number of situations where the main OpenGL library is not called libGL or libgl, as is the case on systems that use libglvnd. + Fix several crashes and rendering issues. - Update to version 2.34.5 (boo#1195735): + Improve VP8 codec selection when using GStreamer 1.20. + Fix connecting to the accessiblity bus when using the Bubblewrap sandbox. + Fix links being incorrectly activated when starting a pinch zoom gesture. + Fix touch-based scrolling. + Fix the build with recent toolchains based on GCC 12 and on older ones as included e.g. in Ubuntu 18.04. + Fix the build with ICU 60, version 61 is no longer required. + Fix several crashes and rendering issues. + Security fixes: CVE-2022-22589, CVE-2022-22590, CVE-2022-22592,. + Drop webkit2gtk3-gcc12.patch: fixed upstream. - Update constraints for disk space even more, now at 20 gig. ==== webkit2gtk3-soup2 ==== Version update (2.34.4 -> 2.34.6) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 webkit2gtk-4_0-injected-bundles - Update to version 2.34.6: + Fix accessibility not working when the Bubblewrap sandbox is enabled. + Fix rendering of scrollbars when overlay scrollbars are disabled. + Fix the build when the X11 support is disabled. + Fix the build in a number of situations where the main OpenGL library is not called libGL or libgl, as is the case on systems that use libglvnd. + Fix several crashes and rendering issues. - Update to version 2.34.5 (boo#1195735): + Improve VP8 codec selection when using GStreamer 1.20. + Fix connecting to the accessiblity bus when using the Bubblewrap sandbox. + Fix links being incorrectly activated when starting a pinch zoom gesture. + Fix touch-based scrolling. + Fix the build with recent toolchains based on GCC 12 and on older ones as included e.g. in Ubuntu 18.04. + Fix the build with ICU 60, version 61 is no longer required. + Fix several crashes and rendering issues. + Security fixes: CVE-2022-22589, CVE-2022-22590, CVE-2022-22592,. + Drop webkit2gtk3-gcc12.patch: fixed upstream. - Update constraints for disk space even more, now at 20 gig. ==== wireless-regdb ==== Version update (20211209 -> 20220108) - Update to version 20220108: * wireless-regdb: Update regulatory rules for Croatia (HR) on 6GHz ==== wireplumber ==== Version update (0.4.7 -> 0.4.8) Subpackages: libwireplumber-0_4-0 wireplumber-audio - Add patch from upstream to fix va_list APIs for ppc64le and aarch64, where va_list is not a pointer (boo#1195818): * 0001-spa-json-fix-va_list-APIs-for-different-architectures.patch - Add patch from upstream to fix a crash if config.properties is nil: * 0001-restore-stream-do-not-crash-if-config_properties-is-nil.patch - Update to version 0.4.8: * Highlights: - Added bluetooth profile auto-switching support. Bluetooth headsets will now automatically switch to the HSP/HFP profile when making a call and go back to the A2DP profile after the call ends (#90) - Added an option (enabled by default) to auto-switch to echo-cancel virtual device nodes when the echo-cancel module is loaded in pipewire-pulse, if there is no other configured default node * Fixes: - Fixed a regression that prevented nodes from being selected as default when using the pro-audio profile (#163) - Fixed a regression that caused encoded audio streams to stall (#178) - Fixed restoring bluetooth device profiles * Library: - A new WpSpaJson API was added as a front-end to spa-json. This is also exposed to Lua, so that Lua scripts can natively parse and write data in the spa-json format * Misc: - wpctl can now list the configured default sources and sinks and has a new command that allows clearing those configured defaults, so that wireplumber goes back to choosing the default nodes based on node priorities - The restore-stream script now has its own configuration file in main.lua.d/40-stream-defaults.lua and has independent options for restoring properties and target nodes - The restore-stream script now supports rule-based configuration to disable restoring volume properties and/or target nodes for specific streams, useful for applications that misbehave when we restore those (see #169) - policy-endpoint now assigns the "Default" role to any stream that does not have a role, so that it can be linked to a pre-configured endpoint - The route-settings-api module was dropped in favor of dealing with json natively in Lua, now that the API exists - Drop patch which is already upstream: * 0001-default-nodes-handle-nodes-without-Routes.patch - Update split-config-file.py script ==== wpa_supplicant ==== - Apply Revert-DBus-Add-sae-to-interface-key_mgmt-capabilities.patch to fix connect with AVM FB, if WPA3 transition mode is activated, e.g. Wifi -> Security: is WPA2 + WPA3, alt. switch to WPA2 (CCMP) (bsc#1195312) - drop restore-old-dbus-interface.patch, wicked has been switching to the new dbus interface in version 0.6.66. - drop wpa_supplicant-getrandom.patch : glibc has been updated so the getrandom() wrapper is now there - config: * enable QCA vendor extensions to nl80211 * enable EAP-EKE * Support HT overrides * WPA3-Enterprise * TLS v1.1 and TLS v1.2 * Fast Session Transfer (FST) * Automatic Channel Selection * Multi Band Operation * Fast Initial Link Setup * Mesh Networking (IEEE 802.11s) - config: * Reenable Fast BSS Transition (likely fixing bsc#1195312) * Enable OCV, security feature that prevents MITM multi-channel attacks * Enable OWE for better hotspot support ==== xdg-dbus-proxy ==== Version update (0.1.2 -> 0.1.3) - Update to version 0.1.3: + Silence compiler warnings. + Fix build with musl. ==== xdg-desktop-portal-kde ==== Version update (5.24.0 -> 5.24.1) - Update to 5.24.1 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.24.1 - Changes since 5.24.0: * [screencast] Fall back to monitor if no type is given (kde#450206) ==== xdm ==== - added "Recommends: xdmbgrd" to make sure we have a background for xdm and the xdmbgrd package is required by anyone and not silently dropped by accident (boo#1195664) - fix bashism in postinstall script (bsc#1195391) ==== xorg-x11-server ==== Subpackages: xorg-x11-server-Xvfb - U_xephyr-Don-t-check-for-SeatId-anymore.patch * fix mouse/keyboard focus in Xephyr (boo#1194658, github issue#1289) - fix bashisms in pre_checkins.sh (bsc#1195391) ==== xwayland ==== Version update (22.0.99.902 -> 22.1.0) - Update to version 22.1.0 * xwayland: Fix cursor color ==== yast2 ==== Version update (4.4.43 -> 4.4.45) - do not strip surrounding white space in CDATA XML elements (bsc#1195910) - 4.4.45 - Keep the user defined $Y2STYLE and $XCURSOR_THEME environment variables, allow changing the installer theme via these environment variables (related to jsc#SLE-20547) - 4.4.44
participants (1)
-
Guillaume Gardet