Please note that this mail was generated by a script. The described changes are computed based on the aarch64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=kubic&groupid=3&version=Tumbleweed&build=20201002 https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&component=Kubic&query_format=advanced&resolution=--- Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: busybox-links ima-evm-utils podman (2.0.6 -> 2.1.1) raspberrypi-firmware (2020.09.03 -> 2020.09.30) raspberrypi-firmware-config (2020.09.03 -> 2020.09.30) systemd (246.4 -> 246.6) wicked (0.6.63 -> 0.6.64) === Details === ==== busybox-links ==== Subpackages: busybox-coreutils busybox-gawk busybox-grep busybox-gzip busybox-xz - Don't fail if rpm will not be build ==== ima-evm-utils ==== Subpackages: evmctl libimaevm2 - Fix missing new line in help (0001-help-Add-missing-new-line-for-ignore-violations.patch) ==== podman ==== Version update (2.0.6 -> 2.1.1) Subpackages: podman-cni-config - Added patch varlink.patch to disable needless varlink code generation. This would cause compile failures in OBS. (https://github.com/containers/podman/pull/7854) - Cleanup %build section a bit and no longer build in GOPATH. This shouldn't be needed anymore. - Path BUILDFLAGS via enviroment variable to allow it being appended to the corresponding Makefile variable instead of completely overriding it. - Install new auto-update system units - Update to v2.1.1: * Changes - The `podman info` command now includes the cgroup manager Podman is using. * API - The REST API now includes a Server header in all responses. - Fixed a bug where the Libpod and Compat Attach endpoints could terminate early, before sending all output from the container. - Fixed a bug where the Compat Create endpoint for containers did not properly handle the Interactive parameter. - Fixed a bug where the Compat Kill endpoint for containers could continue to run after a fatal error. - Fixed a bug where the Limit parameter of the Compat List endpoint for Containers did not properly handle a limit of 0 (returning nothing, instead of all containers) [#7722]. - The Libpod Stats endpoint for containers is being deprecated and will be replaced by a similar endpoint with additional features in a future release. - Changes in v2.1.0 * Features - A new command, `podman image mount`, has been added. This allows for an image to be mounted, read-only, to inspect its contents without creating a container from it [#1433]. - The `podman save` and `podman load` commands can now create and load archives containing multiple images [#2669]. - Rootless Podman now supports all `podman network` commands, and rootless containers can now be joined to networks. - The performance of `podman build` on `ADD` and `COPY` instructions has been greatly improved, especially when a `.dockerignore` is present. - The `podman run` and `podman create` commands now support a new mode for the `--cgroups` option, `--cgroups=split`. Podman will create two cgroups under the cgroup it was launched in, one for the container and one for Conmon. This mode is useful for running Podman in a systemd unit, as it ensures that all processes are retained in systemd's cgroup hierarchy [#6400]. - The `podman run` and `podman create` commands can now specify options to slirp4netns by using the `--network` option as follows: `--net slirp4netns:opt1,opt2`. This allows for, among other things, switching the port forwarder used by slirp4netns away from rootlessport. - The `podman ps` command now features a new option, `--storage`, to show containers from Buildah, CRI-O and other applications. - The `podman run` and `podman create` commands now feature a `--sdnotify` option to control the behavior of systemd's sdnotify with containers, enabling improved support for Podman in `Type=notify` units. - The `podman run` command now features a `--preserve-fds` opton to pass file descriptors from the host into the container [#6458]. - The `podman run` and `podman create` commands can now create overlay volume mounts, by adding the `:O` option to a bind mount (e.g. `-v /test:/test:O`). Overlay volume mounts will mount a directory into a container from the host and allow changes to it, but not write those changes back to the directory on the host. - The `podman play kube` command now supports the Socket HostPath type [#7112]. - The `podman play kube` command now supports read-only mounts. - The `podman play kube` command now supports setting labels on pods from Kubernetes metadata labels. - The `podman play kube` command now supports setting container restart policy [#7656]. - The `podman play kube` command now properly handles `HostAlias` entries. - The `podman generate kube` command now adds entries to `/etc/hosts` from `--host-add` generated YAML as `HostAlias` entries. - The `podman play kube` and `podman generate kube` commands now properly support `shareProcessNamespace` to share the PID namespace in pods. - The `podman volume ls` command now supports the `dangling` filter to identify volumes that are dangling (not attached to any container). - The `podman run` and `podman create` commands now feature a `--umask` option to set the umask of the created container. - The `podman create` and `podman run` commands now feature a `--tz` option to set the timezone within the container [#5128]. - Environment variables for Podman can now be added in the `containers.conf` configuration file. - The `--mount` option of `podman run` and `podman create` now supports a new mount type, `type=devpts`, to add a `devpts` mount to the container. This is useful for containers that want to mount `/dev/` from the host into the container, but still create a terminal. - The `--security-opt` flag to `podman run` and `podman create` now supports a new option, `proc-opts`, to specify options for the container's `/proc` filesystem. - Podman with the `crun` OCI runtime now supports a new option to `podman run` and `podman create`, `--cgroup-conf`, which allows for advanced configuration of cgroups on cgroups v2 systems. - The `podman create` and `podman run` commands now support a `--override-variant` option, to override the architecture variant of the image that will be pulled and ran. - A new global option has been added to Podman, `--runtime-flags`, which allows for setting flags to use when the OCI runtime is called. - The `podman manifest add` command now supports the `--cert-dir`, `--auth-file`, `--creds`, and `--tls-verify` options. * Security - This release resolves CVE-2020-14370, in which environment variables could be leaked between containers created using the Varlink API. * Changes - Podman will now retry pulling an image 3 times if a pull fails due to network errors. - The `podman exec` command would previously print error messages (e.g. `exec session exited with non-zero exit code - 1`) when the command run exited with a non-0 exit code. It no longer does this. The `podman exec` command will still exit with the same exit code as the command run in the container did. - Error messages when creating a container or pod with a name that is already in use have been improved. - For read-only containers running systemd init, Podman creates a tmpfs filesystem at `/run`. This was previously limited to 65k in size and mounted `noexec`, but is now unlimited size and mounted `exec`. - The `podman system reset` command no longer removes configuration files for rootless Podman. * API - The Libpod API version has been bumped to v2.0.0 due to a breaking change in the Image List API. - Docker-compatible Volume Endpoints (Create, Inspect, List, Remove, Prune) are now available! - Added an endpoint for generating systemd unit files for containers. - The `last` parameter to the Libpod container list endpoint now has an alias, `limit` [#6413]. - The Libpod image list API new returns timestamps in Unix format, as integer, as opposed to as strings - The Compat Inspect endpoint for containers now includes port information in NetworkSettings. - The Compat List endpoint for images now features limited support for the (deprecated) `filter` query parameter [#6797]. - Fixed a bug where the Compat Create endpoint for containers was not correctly handling bind mounts. - Fixed a bug where the Compat Create endpoint for containers would not return a 404 when the requested image was not present. - Fixed a bug where the Compat Create endpoint for containers did not properly handle Entrypoint and Command from images. - Fixed a bug where name history information was not properly added in the Libpod Image List endpoint. - Fixed a bug where the Libpod image search endpoint improperly populated the Description field of responses. - Added a `noTrunc` option to the Libpod image search endpoint. - Fixed a bug where the Pod List API would return null, instead of an empty array, when no pods were present [#7392]. - Fixed a bug where endpoints that hijacked would do perform the hijack too early, before being ready to send and receive data [#7195]. - Fixed a bug where Pod endpoints that can operate on multiple containers at once (e.g. Kill, Pause, Unpause, Stop) would not forward errors from individual containers that failed. - The Compat List endpoint for networks now supports filtering results [#7462]. - Fixed a bug where the Top endpoint for pods would return both a 500 and 404 when run on a non-existant pod. - Fixed a bug where Pull endpoints did not stream progress back to the client. - The Version endpoints (Libpod and Compat) now provide version in a format compatible with Docker. - All non-hijacking responses to API requests should not include headers with the version of the server. - Fixed a bug where Libpod and Compat Events endpoints did not send response headers until the first event occurred [#7263]. - Fixed a bug where the Build endpoints (Compat and Libpod) did not stream progress to the client. - Fixed a bug where the Stats endpoints (Compat and Libpod) did not properly handle clients disconnecting. - Fixed a bug where the Ignore parameter to the Libpod Stop endpoint was not performing properly. - Fixed a bug where the Compat Logs endpoint for containers did not stream its output in the correct format [#7196]. ==== raspberrypi-firmware ==== Version update (2020.09.03 -> 2020.09.30) - Update to e7464dd (2020-09-30): * firmware: platform: Add support for SCB clock and set to 250MHz * firmware: Revert arm_loader: Move first call to set_turbo after arm->start * firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support * arm_ldconfig: Fix kernel8 decompression See: #1467 * firmware: arm_ldconfig: Restore the fallback load address See: #1467 * firmware: ilcamera: Disable timeouts on trigger sink devices * firmware: genet: Flush RBUF/TBUF and clear mac-address on stop See: raspberrypi/linux#3850 * firmware: dmalib: Add support for 40-bit 2d memcpy * firmware: sdcard: Reduce SD read overhead * firmware: sdhost_arasan: Increase time threshold before suspend * firmware: video_decode: Only shutdown codec on both ports being disabled ? * firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer * firmware: arm_loader: Make arm clock accesses only see their own boosts See: #1469 ==== raspberrypi-firmware-config ==== Version update (2020.09.03 -> 2020.09.30) - Update to e7464dd (2020-09-30): * firmware: platform: Add support for SCB clock and set to 250MHz * firmware: Revert arm_loader: Move first call to set_turbo after arm->start * firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support * arm_ldconfig: Fix kernel8 decompression See: #1467 * firmware: arm_ldconfig: Restore the fallback load address See: #1467 * firmware: ilcamera: Disable timeouts on trigger sink devices * firmware: genet: Flush RBUF/TBUF and clear mac-address on stop See: raspberrypi/linux#3850 * firmware: dmalib: Add support for 40-bit 2d memcpy * firmware: sdcard: Reduce SD read overhead * firmware: sdhost_arasan: Increase time threshold before suspend * firmware: video_decode: Only shutdown codec on both ports being disabled ? * firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer * firmware: arm_loader: Make arm clock accesses only see their own boosts See: #1469 ==== systemd ==== Version update (246.4 -> 246.6) Subpackages: libsystemd0 libudev1 systemd-logger systemd-sysvinit udev - Import commit d7b5ac76dc95ddf30e707d26998e36303e9f52a7 (merge of v246.6) For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/1cab0d44584687ace92d1df30eadf264... - Ship {/usr/lib,/etc}/systemd/network directories in the main package These directories can be used by both udevd and networkd. - Remove dangling symlink /usr/lib/systemd/system/sockets.target.wants/systemd-journald-audit.socket Otherwise the build system complains. - Import commit 1cab0d44584687ace92d1df30eadf264231e3b65 (include v246.5) 304ec2c7ab fstab-generator: add 'nofail' when NFS 'bg' option is used (bsc#1176513) 6ae277fb37 test: adapt TEST-21-SYSUSERS for SUSE acd8bfd2cc test: adapt TEST-13-NSPAWN-SMOKE for SUSE [...] For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/a4e393eecb9dbe140a6c7d57419c291d... ==== wicked ==== Version update (0.6.63 -> 0.6.64) Subpackages: wicked-service - version 0.6.64 - avoid incomplete ifdown/timeout on route deletion error (bsc#1174099) - dhcp4: add DHCLIENT_CREATE_CID to ifcfg (jsc#SLE-15770) - wicked: fixes to ifreload on port changes (bsc#1168155,bsc#1172082) - team: fix schema to use correct hwaddr_policy property (boo#1171234) - team: enable ipv6 on ports when nsna_ping linkwatch is used (bsc#959556) -- To unsubscribe, e-mail: opensuse-kubic+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kubic+owner@opensuse.org