Re: [opensuse-kernel] Backporting 2.6.30?

newer
[opensuse-kernel] kernel & BIOS...

older
[opensuse-kernel] Question on...

Francis Giannaros

29 Jul 2009 29 Jul '09

18:56

2009/7/27 Jeff Mahoney :

...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Francis Giannaros wrote:

...
2009/7/27 Greg KH :

...
On Sat, Jul 25, 2009 at 10:14:00PM +0100, Francis Giannaros wrote:

...
...
...
Just try it. I'am running 3.6.30 kernels on 11.1 for some time now without problems. Most error messages are caused by a configuration change. The driver is no longer build as module but compiled into the kernel. Yes, that is why those warnings show up now. For some reason I thought we had fixed the printing of those messages, maybe that hasn't made it out into FACTORY just yet...

thanks, Seems to be working very well so far...I guess then it would be great if someone triggered the builds for openSUSE 11.1 as well. Why do you need something different, the above should work fine. We aren't going to add it to the "normal" 11.1 update server.

Of course not, it would just be better if it was in an openSUSE 11.1 repository under the kernel:head project (rather than under factory), because at least then the packages are being built against 11.1 (though I admit it's working fine for me now).

Looks like someone already did it since my original mail, so no worries.

Yeah, I did it but wasn't going to announce it until it was populated.

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas? Regards, -- Francis Giannaros http://francis.giannaros.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Show replies by thread

Greg KH

29 Jul 29 Jul

20:45

New subject: [opensuse-kernel] Backporting 2.6.30?

On Wed, Jul 29, 2009 at 07:56:56PM +0100, Francis Giannaros wrote:

...

2009/7/27 Jeff Mahoney :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Francis Giannaros wrote:

...
2009/7/27 Greg KH :

...
On Sat, Jul 25, 2009 at 10:14:00PM +0100, Francis Giannaros wrote:

...
...
> Just try it. I'am running 3.6.30 kernels on 11.1 for some time now without > problems. Most error messages are caused by a configuration change. The > driver is no longer build as module but compiled into the kernel. Yes, that is why those warnings show up now. For some reason I thought we had fixed the printing of those messages, maybe that hasn't made it out into FACTORY just yet...

thanks, Seems to be working very well so far...I guess then it would be great if someone triggered the builds for openSUSE 11.1 as well. Why do you need something different, the above should work fine. We aren't going to add it to the "normal" 11.1 update server.

Of course not, it would just be better if it was in an openSUSE 11.1 repository under the kernel:head project (rather than under factory), because at least then the packages are being built against 11.1 (though I admit it's working fine for me now).

Looks like someone already did it since my original mail, so no worries.

Yeah, I did it but wasn't going to announce it until it was populated.

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

Are you using the closed source ATI or nvidia drivers? if so, I wouldn't recommend using .31-rc yet. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Francis Giannaros

20:54

New subject: [opensuse-kernel] Backporting 2.6.30?

2009/7/29 Greg KH :

...

On Wed, Jul 29, 2009 at 07:56:56PM +0100, Francis Giannaros wrote:

...
2009/7/27 Jeff Mahoney :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Francis Giannaros wrote:

...
2009/7/27 Greg KH :

...
On Sat, Jul 25, 2009 at 10:14:00PM +0100, Francis Giannaros wrote:

...
>> Just try it. I'am running 3.6.30 kernels on 11.1 for some time now without >> problems. Most error messages are caused by a configuration change. The >> driver is no longer build as module but compiled into the kernel. > Yes, that is why those warnings show up now. For some reason I thought > we had fixed the printing of those messages, maybe that hasn't made it > out into FACTORY just yet... > > thanks, Seems to be working very well so far...I guess then it would be great if someone triggered the builds for openSUSE 11.1 as well. Why do you need something different, the above should work fine. We aren't going to add it to the "normal" 11.1 update server.

Of course not, it would just be better if it was in an openSUSE 11.1 repository under the kernel:head project (rather than under factory), because at least then the packages are being built against 11.1 (though I admit it's working fine for me now).

Looks like someone already did it since my original mail, so no worries.

Yeah, I did it but wasn't going to announce it until it was populated.

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

Are you using the closed source ATI or nvidia drivers? if so, I wouldn't recommend using .31-rc yet.

Nope, I have an Intel GMA 4500MHD Regards, -- Francis Giannaros http://francis.giannaros.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Greg KH

21:03

New subject: [opensuse-kernel] Backporting 2.6.30?

On Wed, Jul 29, 2009 at 09:54:29PM +0100, Francis Giannaros wrote:

...

2009/7/29 Greg KH :

...
On Wed, Jul 29, 2009 at 07:56:56PM +0100, Francis Giannaros wrote:

...
2009/7/27 Jeff Mahoney :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Francis Giannaros wrote:

...
2009/7/27 Greg KH :

...
On Sat, Jul 25, 2009 at 10:14:00PM +0100, Francis Giannaros wrote: >>> Just try it. I'am running 3.6.30 kernels on 11.1 for some time now without >>> problems. Most error messages are caused by a configuration change. The >>> driver is no longer build as module but compiled into the kernel. >> Yes, that is why those warnings show up now. For some reason I thought >> we had fixed the printing of those messages, maybe that hasn't made it >> out into FACTORY just yet... >> >> thanks, > Seems to be working very well so far...I guess then it would be great > if someone triggered the builds for openSUSE 11.1 as well. Why do you need something different, the above should work fine. We aren't going to add it to the "normal" 11.1 update server.

Of course not, it would just be better if it was in an openSUSE 11.1 repository under the kernel:head project (rather than under factory), because at least then the packages are being built against 11.1 (though I admit it's working fine for me now).

Looks like someone already did it since my original mail, so no worries.

Yeah, I did it but wasn't going to announce it until it was populated.

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

Are you using the closed source ATI or nvidia drivers? if so, I wouldn't recommend using .31-rc yet.

Nope, I have an Intel GMA 4500MHD

Ick, not good. Odds are you need to update the intel xorg driver as well. Or turn KMS off (or on, if it's off). For now, it's probably easiest to just go back to the 11.1 kernel, or go to the 11.2 snapshots, the mixture here might just not be good. sorry, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

AndiSugandi™

30 Jul 30 Jul

02:22

New subject: [opensuse-kernel] Backporting 2.6.30?

On Thu, Jul 30, 2009 at 1:56 AM, Francis Giannaros wrote: Btw, should we make a new thread about this 2.6.31-rc4?

...

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

I also have another issue about this kernel. It succeeded to boot, GUI ran well, but I it failed to run 'wvdial' to my 3G Modem. I have ZTE USB 3G Modem[0], worked fine on last kernels (default openSUSE 11.1 kernel, and 2.6.30-2). The log after I launch 'usb_modeswitch': http://pastebin.ca/1511751 'wvdial': http://pastebin.ca/1511759 and the kernel is 2.6.31-rc4-4-default Any clues, please? TIA. [0] http://easgs.wordpress.com/2009/07/09/modem-zte-mf636-in-opensuse-11-1-32bit... Regards, Andi S. -- AndiSugandi™ is andi.opensuse-id.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Greg KH

15:15

New subject: [opensuse-kernel] Backporting 2.6.30?

On Thu, Jul 30, 2009 at 09:22:58AM +0700, AndiSugandi™ wrote:

...

On Thu, Jul 30, 2009 at 1:56 AM, Francis Giannaros wrote:

Btw, should we make a new thread about this 2.6.31-rc4?

...
After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

I also have another issue about this kernel. It succeeded to boot, GUI ran well, but I it failed to run 'wvdial' to my 3G Modem.

I have ZTE USB 3G Modem[0], worked fine on last kernels (default openSUSE 11.1 kernel, and 2.6.30-2).

The log after I launch 'usb_modeswitch': http://pastebin.ca/1511751

'wvdial': http://pastebin.ca/1511759

and the kernel is 2.6.31-rc4-4-default

Any clues, please?

usb-serial devices don't work very well in 2.6.31-rc4, it will be fixed in the next release. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Francis Giannaros

17:49

New subject: [opensuse-kernel] Backporting 2.6.30?

2009/7/29 Greg KH :

...

On Wed, Jul 29, 2009 at 09:54:29PM +0100, Francis Giannaros wrote:

...
2009/7/29 Greg KH :

...
On Wed, Jul 29, 2009 at 07:56:56PM +0100, Francis Giannaros wrote:

...
2009/7/27 Jeff Mahoney :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Francis Giannaros wrote:

...
2009/7/27 Greg KH : > On Sat, Jul 25, 2009 at 10:14:00PM +0100, Francis Giannaros wrote: >>>> Just try it. I'am running 3.6.30 kernels on 11.1 for some time now without >>>> problems. Most error messages are caused by a configuration change. The >>>> driver is no longer build as module but compiled into the kernel. >>> Yes, that is why those warnings show up now. For some reason I thought >>> we had fixed the printing of those messages, maybe that hasn't made it >>> out into FACTORY just yet... >>> >>> thanks, >> Seems to be working very well so far...I guess then it would be great >> if someone triggered the builds for openSUSE 11.1 as well. > Why do you need something different, the above should work fine. We > aren't going to add it to the "normal" 11.1 update server.

Of course not, it would just be better if it was in an openSUSE 11.1 repository under the kernel:head project (rather than under factory), because at least then the packages are being built against 11.1 (though I admit it's working fine for me now).

Looks like someone already did it since my original mail, so no worries.

Yeah, I did it but wasn't going to announce it until it was populated.

After updating to the .31rc4 my X doesn't start (but it works in failsafe); if I run sax2 -r it freezes (the screen, I can still input stuff even though it's not shown), but here's the error log: http://francis.giannaros.org/temp/SaX.log -- any ideas?

Are you using the closed source ATI or nvidia drivers? if so, I wouldn't recommend using .31-rc yet.

Nope, I have an Intel GMA 4500MHD

Ick, not good. Odds are you need to update the intel xorg driver as well.

Ah, thanks -- upgraded my Xorg too and it's working perfectly now. Regards, -- Francis Giannaros http://francis.giannaros.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

AndiSugandi™

3 Aug 3 Aug

10:52

New subject: [opensuse-kernel] Backporting 2.6.30?

2009/7/30 Greg KH :

...

...
I also have another issue about this kernel. It succeeded to boot, GUI ran well, but I it failed to run 'wvdial' to my 3G Modem.

I have ZTE USB 3G Modem[0], worked fine on last kernels (default openSUSE 11.1 kernel, and 2.6.30-2).

The log after I launch 'usb_modeswitch': http://pastebin.ca/1511751

'wvdial': http://pastebin.ca/1511759

and the kernel is 2.6.31-rc4-4-default

Any clues, please?

usb-serial devices don't work very well in 2.6.31-rc4, it will be fixed in the next release.

So there's no need to report it to the bugzilla, right? Regards, Andi S. -- AndiSugandi™ is andi.opensuse-id.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

Greg KH

15:52

New subject: [opensuse-kernel] Backporting 2.6.30?

On Mon, Aug 03, 2009 at 05:52:46PM +0700, AndiSugandi™ wrote:

...

2009/7/30 Greg KH :

...
...
I also have another issue about this kernel. It succeeded to boot, GUI ran well, but I it failed to run 'wvdial' to my 3G Modem.

I have ZTE USB 3G Modem[0], worked fine on last kernels (default openSUSE 11.1 kernel, and 2.6.30-2).

The log after I launch 'usb_modeswitch': http://pastebin.ca/1511751

'wvdial': http://pastebin.ca/1511759

and the kernel is 2.6.31-rc4-4-default

Any clues, please?

usb-serial devices don't work very well in 2.6.31-rc4, it will be fixed in the next release.

So there's no need to report it to the bugzilla, right?

As it should be fixed already in -rc5, no :) But if -rc5 is causing you problems, please let us know. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org

5392

Age (days ago)

5397

Last active (days ago)

List overview

Download

8 comments

3 participants

participants (3)

AndiSugandi™
Francis Giannaros
Greg KH