MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity-barom... Enable the driver for potential users. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m -- 2.35.3
Hi Matwey, On 22/06/2022 19:59, Matwey V. Kornilov wrote:
MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity-barom...
Enable the driver for potential users.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Are you targeting Leap or Tumbleweed with this patch? Regards, Matthias
--- config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m
On 22. 06. 22, 19:59, Matwey V. Kornilov wrote:
MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity-barom...
Enable the driver for potential users.
What distro version do you want this to be applied? Provided you didn't CC master+stable maintainers, you should start there. The most straightforward way is to open a bug with the text above anyway. (And attaching this very patch too.)
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m
-- js suse labs
чт, 23 июн. 2022 г. в 11:48, Jiri Slaby <jslaby@suse.cz>:
On 22. 06. 22, 19:59, Matwey V. Kornilov wrote:
MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity-barom...
Enable the driver for potential users.
What distro version do you want this to be applied? Provided you didn't CC master+stable maintainers, you should start there.
This is for master.
The most straightforward way is to open a bug with the text above anyway. (And attaching this very patch too.)
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m
-- js suse labs
-- With best regards, Matwey V. Kornilov
On Thu, Jun 23, 2022 at 12:03:00PM +0300, Matwey V. Kornilov wrote:
чт, 23 июн. V2022 г. в 11:48, Jiri Slaby <jslaby@suse.cz>:
On 22. 06. 22, 19:59, Matwey V. Kornilov wrote:
MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity-barom...
Enable the driver for potential users.
[...]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m -# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m
The CONFIG_MLX90614 config option is also available on x86_64, i386 and riscv64, AFAICS. Would it make sense to enable the driver there as well or is the hardware ARM specific? Michal Kubecek
On Freitag, 24. Juni 2022 11:25:39 CEST Michal Kubecek wrote:
On Thu, Jun 23, 2022 at 12:03:00PM +0300, Matwey V. Kornilov wrote:
чт, 23 июн. V2022 г. в 11:48, Jiri Slaby <jslaby@suse.cz>:
On 22. 06. 22, 19:59, Matwey V. Kornilov wrote:
MLX90614 is I2C (SMBus) remote temperature sensor. The boards are available for SBCs: https://www.waveshare.com/product/modules/sensors/temperature-humidity -barometer/infrared-temperature-sensor.htm
Enable the driver for potential users.
[...]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> ---
config/arm64/default | 2 +- config/armv7hl/default | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/arm64/default b/config/arm64/default index 9c28c2ac8ed..cf280b4e8a1 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -10820,7 +10820,7 @@ CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m
-# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m
CONFIG_MLX90632=m # CONFIG_TMP006 is not set CONFIG_TMP007=m
diff --git a/config/armv7hl/default b/config/armv7hl/default index a9607accd0e..823da06962a 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -10660,7 +10660,7 @@ CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m
-# CONFIG_MLX90614 is not set +CONFIG_MLX90614=m
CONFIG_MLX90632=m CONFIG_TMP006=m CONFIG_TMP007=m
The CONFIG_MLX90614 config option is also available on x86_64, i386 and riscv64, AFAICS. Would it make sense to enable the driver there as well or is the hardware ARM specific?
Michal Kubecek
It is a far-infrared thermometer IC, connected via I2C to the host. There is probably not a single board (PC, Laptop, SBC, ...) which has this built in, but it is available on small breakout boards from several vendors. As it can be connected to any computer which has an I2C connector (this also includes USB-I2C converters), it should also be enabled on *all* other architectures. Note, the similar MLX90632 is enabled for at least x86_64. Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen phone: +49 241 53809034 mobile: +49 151 50412019
On Fri, Jun 24, 2022 at 04:52:53PM +0200, Stefan Brüns wrote:
It is a far-infrared thermometer IC, connected via I2C to the host. There is probably not a single board (PC, Laptop, SBC, ...) which has this built in, but it is available on small breakout boards from several vendors.
As it can be connected to any computer which has an I2C connector (this also includes USB-I2C converters), it should also be enabled on *all* other architectures.
master branch is updated now, with MLX90632=m in all configs where it is available. Please note that all ARM configs are disabled until they are updated for 5.19. Michal
пт, 24 июн. 2022 г., 19:05 Michal Kubecek <mkubecek@suse.cz>:
On Fri, Jun 24, 2022 at 04:52:53PM +0200, Stefan Brüns wrote:
It is a far-infrared thermometer IC, connected via I2C to the host. There is probably not a single board (PC, Laptop, SBC, ...) which has this built in, but it is available on small breakout boards from several vendors.
As it can be connected to any computer which has an I2C connector (this also includes USB-I2C converters), it should also be enabled on *all* other architectures.
master branch is updated now, with MLX90632=m in all configs where it is available. Please note that all ARM configs are disabled until they are updated for 5.19.
Thank you!
Michal
participants (5)
-
Jiri Slaby -
Matthias Brugger -
Matwey V. Kornilov -
Michal Kubecek -
Stefan Brüns