[opensuse-kernel] Re: ACPI problems, Dell XPS 15z laptop
On 25/12/11 18:07, Cristian Rodríguez wrote:
(please CC me your replies, I am not subscribed)
Hi:
The laptop in $SUBJECT freezes at boot time, at random points sometimes after
[FIRMWARE BUG] ACPI(PEGP) defines _DOD but not _DOS
But in other ocassions, just after udev attempts to mount filesystems.
Using the following boot options make the system boot and work somewhat stable.
(these are single options, not combined)
- acpi=noirq
- pci=noacpi --> with this option I get warnings telling me to try "usepirqmask..."
- nox2apic
- intremap=off
This is a very recent sandy bridge system, the only clues I get from the log is:
"Not all IO-APIC's listed under remapping hardware x2apic not enabled, IRQ remapping init failed"
Heh, today I tested a crazy theory I had about this problem, turned out to be somewhat accurate.. it is not that the machine that hangs always, but it deceivingly "appears" to hang as I cannot get past the cryptsetup password prompt.. it is the keyboard controller that becomes non responsive, that 's it either before the "prompt" (where it hangs) or right after showing it. (in that scenario the USB port works, as plugin and removing a device shows the relevant events in the console) It is random, let's say, the USB port works twice every three boots. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
On 25/12/11 21:20, Cristian Rodríguez wrote:
It is random, let's say, the USB port works twice every three boots.
Ok, now back to home after xmas, I have managed to boot the machine with an external USB keyboard attached here is dmesg problems booting: Neither touchpad or keyboard works unless I boot with pci=noapci 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable) [ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved) [ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable) [ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved) [ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved) [ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved) [ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved) [ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved) [ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS A08 12/13/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes. [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bac85000-bac8f000 [ 0.000000] RAMDISK: 373d9000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf40000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000-ffff88023e3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000b5a28 [ 0.000000] 0: 0x000b6e29 -> 0x000b886a [ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2069459 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31 [ 0.000000] Normal zone: 17913 pages used for memmap [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5a28000 - 00000000b6e29000 [ 0.000000] PM: Registered nosave memory: 00000000b886a000 - 00000000b8ab3000 [ 0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bad2e000 [ 0.000000] PM: Registered nosave memory: 00000000bad2e000 - 00000000bad3d000 [ 0.000000] PM: Registered nosave memory: 00000000bad3d000 - 00000000badfb000 [ 0.000000] PM: Registered nosave memory: 00000000badfb000 - 00000000badfd000 [ 0.000000] PM: Registered nosave memory: 00000000badfd000 - 00000000badff000 [ 0.000000] PM: Registered nosave memory: 00000000badff000 - 00000000bae02000 [ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae0a000 [ 0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000 [ 0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf18000 [ 0.000000] PM: Registered nosave memory: 00000000baf18000 - 00000000baf1c000 [ 0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000 [ 0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744 r8192 d22656 u262144 [ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037205 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9 resume=/dev/system/swap splash=verbose clocksource=hpet hpet64 ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug i8042.debug vga=0x31b [ 0.000000] bootsplash: verbose mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code, 1157300k absent, 210492k reserved, 7648k data, 944k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet timer0 configured in 64-bit mode [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2793.229 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.45 BogoMIPS (lpj=2793229) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000049] AppArmor: AppArmor initialized [ 0.000647] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002144] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002776] Mount-cache hash table entries: 256 [ 0.002859] Initializing cgroup subsys cpuacct [ 0.002863] Initializing cgroup subsys memory [ 0.002877] Initializing cgroup subsys devices [ 0.002880] Initializing cgroup subsys freezer [ 0.002882] Initializing cgroup subsys net_cls [ 0.002884] Initializing cgroup subsys blkio [ 0.002890] Initializing cgroup subsys perf_event [ 0.002912] Disabled fast string operations [ 0.002915] CPU: Physical Processor ID: 0 [ 0.002917] CPU: Processor Core ID: 0 [ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002922] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002927] mce: CPU supports 7 MCE banks [ 0.002936] CPU0: Thermal monitoring handled by SMI [ 0.002941] using mwait in idle threads. [ 0.003584] ACPI: Core revision 20110623 [ 0.059768] Getting VERSION: 1060015 [ 0.059771] Getting VERSION: 1060015 [ 0.059773] Getting ID: 0 [ 0.059774] Getting ID: 0 [ 0.059783] DMAR: Host address width 36 [ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.059881] HPET id 0 under DRHD base 0xfed91000 [ 0.059884] HPET id 0 under DRHD base 0xfed91000 [ 0.059886] HPET id 0 under DRHD base 0xfed91000 [ 0.059888] HPET id 0 under DRHD base 0xfed91000 [ 0.059890] HPET id 0 under DRHD base 0xfed91000 [ 0.059892] HPET id 0 under DRHD base 0xfed91000 [ 0.059894] HPET id 0 under DRHD base 0xfed91000 [ 0.059896] HPET id 0 under DRHD base 0xfed91000 [ 0.060143] Enabled IRQ remapping in x2apic mode [ 0.060146] Enabling x2apic [ 0.060148] Enabled x2apic [ 0.060153] Switched APIC routing to cluster x2apic. [ 0.060158] enabled ExtINT on CPU#0 [ 0.060404] ESR value before enabling vector: 0x00000080 after: 0x00000000 [ 0.060421] ENABLING IO-APIC IRQs [ 0.060423] init IO_APIC IRQs [ 0.060424] apic 2 pin 0 not connected [ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) [ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) [ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) [ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060535] apic 2 pin 16 not connected [ 0.060536] apic 2 pin 17 not connected [ 0.060537] apic 2 pin 18 not connected [ 0.060538] apic 2 pin 19 not connected [ 0.060538] apic 2 pin 20 not connected [ 0.060539] apic 2 pin 21 not connected [ 0.060540] apic 2 pin 22 not connected [ 0.060541] apic 2 pin 23 not connected [ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07 [ 0.070671] Using local APIC timer interrupts. [ 0.070671] calibrating APIC timer ... [ 0.172123] ... lapic delta = 623574 [ 0.172125] ... PM-Timer delta = 357949 [ 0.172126] ... PM-Timer result ok [ 0.172128] ..... delta 623574 [ 0.172130] ..... mult: 26786370 [ 0.172132] ..... calibration result: 99771 [ 0.172134] ..... CPU clock speed is 2793.0611 MHz. [ 0.172136] ..... host bus clock speed is 99.0771 MHz. [ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.172150] PEBS disabled due to CPU errata. [ 0.172154] ... version: 3 [ 0.172155] ... bit width: 48 [ 0.172157] ... generic registers: 4 [ 0.172159] ... value mask: 0000ffffffffffff [ 0.172162] ... max period: 000000007fffffff [ 0.172164] ... fixed-purpose events: 3 [ 0.172166] ... event mask: 000000070000000f [ 0.180330] NMI watchdog enabled, takes one hw-pmu counter. [ 0.188150] Booting Node 0, Processors #1 [ 0.188160] smpboot cpu 1: start_ip = 98000 [ 0.199162] masked ExtINT on CPU#1 [ 0.259011] Disabled fast string operations [ 0.259023] CPU1: Thermal monitoring handled by SMI [ 0.279047] NMI watchdog enabled, takes one hw-pmu counter. [ 0.285004] #2 [ 0.285010] smpboot cpu 2: start_ip = 98000 [ 0.296013] masked ExtINT on CPU#2 [ 0.355853] Disabled fast string operations [ 0.355864] CPU2: Thermal monitoring handled by SMI [ 0.375921] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381847] #3 [ 0.381852] smpboot cpu 3: start_ip = 98000 [ 0.392852] masked ExtINT on CPU#3 [ 0.452696] Disabled fast string operations [ 0.452707] CPU3: Thermal monitoring handled by SMI [ 0.472765] NMI watchdog enabled, takes one hw-pmu counter. [ 0.474664] Brought up 4 CPUs [ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS). [ 0.478171] devtmpfs: initialized [ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes) [ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes) [ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes) [ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes) [ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes) [ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes) [ 0.479061] print_constraints: dummy: [ 0.479091] RTC time: 1:23:20, date: 12/27/11 [ 0.479128] NET: Registered protocol family 16 [ 0.479269] ACPI: bus type pci registered [ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.489012] PCI: Using configuration type 1 for base access [ 0.489769] bio: create slab <bio-0> at 0 [ 0.489840] ACPI: Added _OSI(Module Device) [ 0.489843] ACPI: Added _OSI(Processor Device) [ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.489848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.491351] ACPI: EC: Look up EC in DSDT [ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code [ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.500979] ACPI: Dynamic OEM Table Load: [ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.506495] ACPI: Dynamic OEM Table Load: [ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.509171] ACPI: Dynamic OEM Table Load: [ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.514717] ACPI: Interpreter enabled [ 0.514722] ACPI: (supports S0 S3 S4 S5) [ 0.514744] ACPI: Using IOAPIC for interrupt routing [ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.520446] ACPI: No dock devices found. [ 0.520448] HEST: Table not found. [ 0.520451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.520852] \_SB_.PCI0:_OSC invalid UUID [ 0.520853] _OSC request data:1 8 1f [ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.521540] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.521544] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.521548] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.521613] pci 0000:00:01.0: PME# disabled [ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.521778] pci 0000:00:16.0: PME# disabled [ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.521902] pci 0000:00:1a.0: PME# disabled [ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.521994] pci 0000:00:1b.0: PME# disabled [ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.522079] pci 0000:00:1c.0: PME# disabled [ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.522166] pci 0000:00:1c.1: PME# disabled [ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.522253] pci 0000:00:1c.3: PME# disabled [ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.522339] pci 0000:00:1c.4: PME# disabled [ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.522426] pci 0000:00:1c.5: PME# disabled [ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.522548] pci 0000:00:1d.0: PME# disabled [ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot [ 0.522774] pci 0000:00:1f.2: PME# disabled [ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.524626] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 [ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.525652] pci 0000:03:00.0: PME# disabled [ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.527917] pci 0000:04:00.0: PME# disabled [ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200 [ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit] [ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529910] pci 0000:06:00.0: PME# disabled [ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.531763] 0000:00:1f[A] -> [21] [ 0.531766] 0000:00:1f[B] -> [19] [ 0.531769] 0000:00:1f[C] -> [18] [ 0.531771] 0000:00:1f[D] -> [16] [ 0.531773] 0000:00:1d[A] -> [23] [ 0.531776] 0000:00:1a[A] -> [16] [ 0.531778] 0000:00:1b[A] -> [22] [ 0.531781] 0000:00:16[A] -> [16] [ 0.531783] 0000:00:16[B] -> [19] [ 0.531785] 0000:00:16[C] -> [18] [ 0.531788] 0000:00:16[D] -> [17] [ 0.531790] 0000:00:1c[A] -> [16] [ 0.531792] 0000:00:1c[B] -> [17] [ 0.531795] 0000:00:1c[C] -> [18] [ 0.531797] 0000:00:1c[D] -> [19] [ 0.531799] 0000:00:01[A] -> [16] [ 0.531802] 0000:00:01[B] -> [17] [ 0.531804] 0000:00:01[C] -> [18] [ 0.531806] 0000:00:01[D] -> [19] [ 0.531809] 0000:00:02[A] -> [16] [ 0.531811] 0000:00:04[A] -> [16] [ 0.531813] 0000:00:04[B] -> [17] [ 0.531816] 0000:00:04[C] -> [18] [ 0.531818] 0000:00:04[D] -> [19] [ 0.531840] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.0 is a PCI bridge [ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.531874] 0000:02:00[A] -> [16] [ 0.531877] 0000:02:00[B] -> [17] [ 0.531879] 0000:02:00[C] -> [18] [ 0.531882] 0000:02:00[D] -> [19] [ 0.531890] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.1 is a PCI bridge [ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.531923] 0000:03:00[A] -> [17] [ 0.531925] 0000:03:00[B] -> [18] [ 0.531928] 0000:03:00[C] -> [19] [ 0.531930] 0000:03:00[D] -> [16] [ 0.531940] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.3 is a PCI bridge [ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.531972] 0000:04:00[A] -> [19] [ 0.531974] 0000:04:00[B] -> [16] [ 0.531977] 0000:04:00[C] -> [17] [ 0.531979] 0000:04:00[D] -> [18] [ 0.531988] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.4 is a PCI bridge [ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.532020] 0000:05:00[A] -> [16] [ 0.532023] 0000:05:00[B] -> [17] [ 0.532025] 0000:05:00[C] -> [18] [ 0.532028] 0000:05:00[D] -> [19] [ 0.532053] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.5 is a PCI bridge [ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.532085] 0000:06:00[A] -> [17] [ 0.532087] 0000:06:00[B] -> [18] [ 0.532090] 0000:06:00[C] -> [19] [ 0.532092] 0000:06:00[D] -> [16] [ 0.532109] pci_bind-0085 [00] pci_bind : Device 0000:00:01.0 is a PCI bridge [ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.532141] 0000:01:00[A] -> [16] [ 0.532143] 0000:01:00[B] -> [17] [ 0.532146] 0000:01:00[C] -> [18] [ 0.532148] 0000:01:00[D] -> [19] [ 0.532198] \_SB_.PCI0:_OSC invalid UUID [ 0.532198] _OSC request data:1 1f 1f [ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.532239] \_SB_.PCI0:_OSC invalid UUID [ 0.532240] _OSC request data:1 0 1d [ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.536069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.536078] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.536083] vgaarb: loaded [ 0.536085] vgaarb: bridge control possible 0000:01:00.0 [ 0.536087] vgaarb: no bridge control possible 0000:00:02.0 [ 0.536179] SCSI subsystem initialized [ 0.536213] libata version 3.00 loaded. [ 0.536245] usbcore: registered new interface driver usbfs [ 0.536257] usbcore: registered new interface driver hub [ 0.536277] usbcore: registered new device driver usb [ 0.536324] PCI: Using ACPI for IRQ routing [ 0.537738] PCI: pci_cache_line_size set to 64 bytes [ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff [ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff [ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff [ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.537947] NetLabel: Initializing [ 0.537950] NetLabel: domain hash size = 128 [ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.537961] NetLabel: unlabeled traffic allowed by default [ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.539993] Switching to clocksource hpet [ 0.541903] AppArmor: AppArmor Filesystem Enabled [ 0.541922] pnp: PnP ACPI init [ 0.541934] ACPI: bus type pnp registered [ 0.542307] pnp 00:00: [bus 00-3e] [ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.542313] pnp 00:00: [io 0x0d00-0xffff window] [ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.542387] pnp 00:01: [io 0x0000-0x001f] [ 0.542389] pnp 00:01: [io 0x0081-0x0091] [ 0.542390] pnp 00:01: [io 0x0093-0x009f] [ 0.542391] pnp 00:01: [io 0x00c0-0x00df] [ 0.542392] pnp 00:01: [dma 4] [ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.542511] pnp 00:03: [io 0x00f0] [ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542525] pnp 00:03: [irq 13] [ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.542550] pnp 00:04: [io 0x002e-0x002f] [ 0.542551] pnp 00:04: [io 0x004e-0x004f] [ 0.542553] pnp 00:04: [io 0x0061] [ 0.542555] pnp 00:04: [io 0x0063] [ 0.542556] pnp 00:04: [io 0x0065] [ 0.542557] pnp 00:04: [io 0x0067] [ 0.542558] pnp 00:04: [io 0x0068] [ 0.542559] pnp 00:04: [io 0x006c] [ 0.542560] pnp 00:04: [io 0x0070] [ 0.542561] pnp 00:04: [io 0x0080] [ 0.542562] pnp 00:04: [io 0x0092] [ 0.542563] pnp 00:04: [io 0x00b2-0x00b3] [ 0.542564] pnp 00:04: [io 0x0680-0x069f] [ 0.542566] pnp 00:04: [io 0x1000-0x1003] [ 0.542567] pnp 00:04: [io 0x1004-0x1013] [ 0.542568] pnp 00:04: [io 0xffff] [ 0.542569] pnp 00:04: [io 0x0400-0x0453] [ 0.542570] pnp 00:04: [io 0x0458-0x047f] [ 0.542571] pnp 00:04: [io 0x0500-0x057f] [ 0.542573] pnp 00:04: [io 0x164e-0x164f] [ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.542616] system 00:04: [io 0xffff] has been reserved [ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.542639] pnp 00:05: [io 0x0070-0x0077] [ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542649] pnp 00:05: [irq 8] [ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.542692] pnp 00:06: [io 0x0454-0x0457] [ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.542760] pnp 00:07: [io 0x0060] [ 0.542761] pnp 00:07: [io 0x0064] [ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542770] pnp 00:07: [irq 1] [ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542824] pnp 00:08: [irq 12] [ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13 (active) [ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20 Mode:0 Active:0 Dest:1) [ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.543177] pnp 00:0a: [irq 20] [ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.543336] pnp: PnP ACPI: found 11 devices [ 0.543338] ACPI: ACPI bus type pnp unregistered [ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.549785] PCI: max bus depth: 1 pci_try_num: 2 [ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.549842] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:01.0[A] _PRT entry [ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16 Mode:1 Active:1 Dest:1) [ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549948] pci 0000:00:01.0: setting latency timer to 64 [ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.0[A] _PRT entry [ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549965] pci 0000:00:1c.0: setting latency timer to 64 [ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.1[B] _PRT entry [ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1 Dest:1) [ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.549988] pci 0000:00:1c.1: setting latency timer to 64 [ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.3[D] _PRT entry [ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1 Dest:1) [ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.550011] pci 0000:00:1c.3: setting latency timer to 64 [ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.4[A] _PRT entry [ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550027] pci 0000:00:1c.4: setting latency timer to 64 [ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.5[B] _PRT entry [ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.550050] pci 0000:00:1c.5: setting latency timer to 64 [ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff] [ 0.550125] NET: Registered protocol family 2 [ 0.550318] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.551888] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.553157] TCP: Hash tables configured (established 524288 bind 65536) [ 0.553161] TCP reno registered [ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553308] NET: Registered protocol family 1 [ 0.553322] pci 0000:00:02.0: Boot video device [ 0.553459] PCI: CLS 64 bytes, default 64 [ 0.553496] Unpacking initramfs... [ 0.723042] Freeing initrd memory: 12380k freed [ 0.724650] DMAR: No ATSR found [ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation [ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation [ 0.724692] IOMMU: Setting RMRR: [ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0 [0xbb800000 - 0xbf9fffff] [ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbae1d000 - 0xbae33fff] [ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbae1d000 - 0xbae33fff] [ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.727095] audit: initializing netlink socket (disabled) [ 0.727106] type=2000 audit(1324949000.518:1): initialized [ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.765057] VFS: Disk quotas dquot_6.5.2 [ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.765302] msgmni has been set to 15909 [ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.765486] io scheduler noop registered (default) [ 0.765491] io scheduler deadline registered [ 0.765508] io scheduler cfq registered [ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11 [ 0.765917] vesafb: scrolling: redraw [ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 10240k, total 65472k [ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture... [ 0.767739] bootsplash: silentjpeg size 109002 bytes [ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3). [ 0.778101] bootsplash: silentjpeg size 126037 bytes [ 0.882677] Console: switching to colour frame buffer device 156x60 [ 0.962069] fb0: VESA VGA frame buffer device [ 0.962474] intel_idle: MWAIT substates: 0x21120 [ 0.962475] intel_idle: v0.4 model 0x2A [ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.962518] ERST: Table is not found! [ 0.962842] GHES: HEST is not enabled! [ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.084566] Non-volatile memory driver v1.3 [ 1.084937] Linux agpgart interface v0.103 [ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.089240] ahci 0000:00:1f.2: version 3.0 [ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.2[B] _PRT entry [ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.090657] ahci: SSS flag set, parallel bus scan disabled [ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.106635] scsi0 : ahci [ 1.106935] scsi1 : ahci [ 1.107220] scsi2 : ahci [ 1.107497] scsi3 : ahci [ 1.107773] scsi4 : ahci [ 1.108048] scsi5 : ahci [ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 43 [ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 43 [ 1.109687] ata3: DUMMY [ 1.109906] ata4: DUMMY [ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 43 [ 1.110785] ata6: DUMMY [ 1.111067] Fixed MDIO Bus: probed [ 1.111378] arcnet loaded. [ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1a.0[A] _PRT entry [ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.240042] usb usb1: Product: EHCI Host Controller [ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.306584] hub 1-0:1.0: USB hub found [ 1.328442] hub 1-0:1.0: 2 ports detected [ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1d.0[A] _PRT entry [ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23 Mode:1 Active:1 Dest:1) [ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473720] usb usb2: Product: EHCI Host Controller [ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.473841] hub 2-0:1.0: USB hub found [ 1.473845] hub 2-0:1.0: 2 ports detected [ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver [ 1.753069] Initializing USB Mass Storage driver... [ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz. [ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB, AXM08D1Q, max UDMA/133 [ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.757928] ata1.00: configured for UDMA/133 [ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 AXM0 PQ: 0 ANSI: 5 [ 1.912674] usbcore: registered new interface driver usb-storage [ 1.912675] USB Mass Storage support registered. [ 1.912682] usbcore: registered new interface driver ums-alauda [ 1.912688] usbcore: registered new interface driver ums-cypress [ 1.912694] usbcore: registered new interface driver ums-datafab [ 1.912701] usbcore: registered new interface driver ums-freecom [ 1.912707] usbcore: registered new interface driver ums-isd200 [ 1.912713] usbcore: registered new interface driver ums-jumpshot [ 1.912718] usbcore: registered new interface driver ums-karma [ 1.912724] usbcore: registered new interface driver ums-onetouch [ 1.912730] usbcore: registered new interface driver ums-sddr09 [ 1.912736] usbcore: registered new interface driver ums-sddr55 [ 1.912741] usbcore: registered new interface driver ums-usbat [ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.912807] i8042: [0] 20 -> i8042 (command) [ 1.913286] i8042: [0] 67 <- i8042 (return) [ 1.913347] i8042: [1] 20 -> i8042 (command) [ 1.913721] i8042: [1] 67 <- i8042 (return) [ 1.913726] i8042: [1] 60 -> i8042 (command) [ 1.913889] i8042: [1] 76 -> i8042 (parameter) [ 1.914109] i8042: [1] d3 -> i8042 (command) [ 1.914325] i8042: [1] 5a -> i8042 (parameter) [ 1.914544] i8042: [1] 5a <- i8042 (return) [ 1.914553] i8042: [2] a7 -> i8042 (command) [ 1.914661] i8042: [2] 20 -> i8042 (command) [ 1.914931] i8042: [2] 76 <- i8042 (return) [ 1.914935] i8042: [2] a8 -> i8042 (command) [ 1.915095] i8042: [2] 20 -> i8042 (command) [ 1.915364] i8042: [2] 56 <- i8042 (return) [ 1.915373] i8042: [3] 60 -> i8042 (command) [ 1.915536] i8042: [3] 74 -> i8042 (parameter) [ 1.915763] i8042: [3] d3 -> i8042 (command) [ 1.915978] i8042: [3] f0 -> i8042 (parameter) [ 1.916198] i8042: [3] f0 <- i8042 (return) [ 1.916222] i8042: [4] d3 -> i8042 (command) [ 1.916282] i8042: [4] 56 -> i8042 (parameter) [ 1.916555] i8042: [4] 56 <- i8042 (return) [ 1.916567] i8042: [4] d3 -> i8042 (command) [ 1.916783] i8042: [4] a4 -> i8042 (parameter) [ 1.917002] i8042: [4] a4 <- i8042 (return) [ 1.917027] i8042: [5] 60 -> i8042 (command) [ 1.917137] i8042: [5] 56 -> i8042 (parameter) [ 1.917309] i8042: [5] 60 -> i8042 (command) [ 1.917525] i8042: [5] 47 -> i8042 (parameter) [ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.917632] mousedev: PS/2 mouse device common for all mice [ 1.917760] i8042: [5] f2 -> i8042 (kbd-data) [ 1.917804] rtc_cmos 00:05: RTC can wake from S4 [ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.918037] cpuidle: using governor ladder [ 2.402856] i8042: [491] ed -> i8042 (kbd-data) [ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12) [ 2.402926] hpet1: lost 30 rtc interrupts [ 2.403065] cpuidle: using governor menu [ 2.403067] EFI Variables Facility v0.08 2004-May-17 [ 2.403295] usbcore: registered new interface driver usbhid [ 2.403297] usbhid: USB HID core driver [ 2.404035] i8042: [492] 00 -> i8042 (kbd-data) [ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1) [ 2.510940] i8042: [599] ed -> i8042 (kbd-data) [ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.511126] TCP cubic registered [ 2.511128] IPv6: Loaded, but administratively disabled, reboot required to enable [ 2.511144] lib80211: common routines for IEEE802.11 drivers [ 2.511145] lib80211_crypt: registered algorithm 'NULL' [ 2.511147] Registering the dns_resolver key type [ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 2.511169] [ 2.511169] printing PIC contents [ 2.511173] ... PIC IMR: ffff [ 2.511177] ... PIC IRR: 0c01 [ 2.511184] ... PIC ISR: 0000 [ 2.511187] ... PIC ELCR: 0e00 [ 2.643783] printing local APIC contents on CPU#0/0: [ 2.643784] ... APIC ID: 00000000 (0) [ 2.666176] ... APIC VERSION: 01060015 [ 2.688175] ... APIC TASKPRI: 00000000 (00) [ 2.688176] ... APIC PROCPRI: 00000000 [ 2.688177] ... APIC LDR: 00000001 [ 2.688178] ... APIC SPIV: 000001ff [ 2.688179] ... APIC ISR field: [ 2.688180] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.709866] i8042: [799] f4 -> i8042 (kbd-data) [ 2.710552] ... APIC TMR field: [ 2.710553] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.732661] ... APIC IRR field: [ 2.732662] 0000000002020000000200000000000000000000000000000000000000008000 [ 2.754421] ... APIC ESR: 00000000 [ 2.754422] ... APIC ICR: 000008fd [ 2.754422] ... APIC ICR2: 00000040 [ 2.754423] ... APIC LVTT: 000000ef [ 2.754424] ... APIC LVTPC: 00000400 [ 2.754425] ... APIC LVT0: 00010700 [ 2.754426] ... APIC LVT1: 00000400 [ 2.754427] ... APIC LVTERR: 000000fe [ 2.754428] ... APIC TMICT: 000004c0 [ 2.754428] ... APIC TMCCT: 00000000 [ 2.754429] ... APIC TDCR: 00000003 [ 2.754430] [ 2.775580] number of MP IRQ sources: 15. [ 2.775582] number of IO-APIC #2 registers: 24. [ 2.775583] testing the IO APIC....................... [ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1) [ 2.775695] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.775800] sd 0:0:0:0: [sda] Write Protect is off [ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133 [ 2.825187] ata2.00: configured for UDMA/133 [ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5 [ 2.995778] [ 2.995813] i8042: [1085] d4 -> i8042 (command) [ 2.995924] i8042: [1085] f2 -> i8042 (parameter) [ 2.995926] hub 1-1:1.0: USB hub found [ 2.996023] hub 1-1:1.0: 6 ports detected [ 2.997464] sda: sda1 sda2 [ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12) [ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12) [ 2.999939] i8042: [1089] 60 -> i8042 (command) [ 3.000102] i8042: [1089] 45 -> i8042 (parameter) [ 3.000317] i8042: [1089] 60 -> i8042 (command) [ 3.000531] i8042: [1089] 47 -> i8042 (parameter) [ 3.000767] i8042: [1089] d4 -> i8042 (command) [ 3.000930] i8042: [1089] f2 -> i8042 (parameter) [ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12) [ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12) [ 3.005871] i8042: [1095] d4 -> i8042 (command) [ 3.006034] i8042: [1095] f6 -> i8042 (parameter) [ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12) [ 3.009391] i8042: [1099] d4 -> i8042 (command) [ 3.009609] i8042: [1099] f3 -> i8042 (parameter) [ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12) [ 3.012042] i8042: [1101] d4 -> i8042 (command) [ 3.012206] i8042: [1101] 0a -> i8042 (parameter) [ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12) [ 3.015508] i8042: [1105] d4 -> i8042 (command) [ 3.015725] i8042: [1105] e8 -> i8042 (parameter) [ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12) [ 3.018029] i8042: [1107] d4 -> i8042 (command) [ 3.018192] i8042: [1107] 00 -> i8042 (parameter) [ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12) [ 3.020643] i8042: [1110] d4 -> i8042 (command) [ 3.020807] i8042: [1110] f3 -> i8042 (parameter) [ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12) [ 3.023302] i8042: [1112] d4 -> i8042 (command) [ 3.023465] i8042: [1112] 14 -> i8042 (parameter) [ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12) [ 3.026083] i8042: [1115] d4 -> i8042 (command) [ 3.026247] i8042: [1115] f3 -> i8042 (parameter) [ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12) [ 3.029440] i8042: [1119] d4 -> i8042 (command) [ 3.029708] i8042: [1119] 3c -> i8042 (parameter) [ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12) [ 3.031981] i8042: [1121] d4 -> i8042 (command) [ 3.032144] i8042: [1121] f3 -> i8042 (parameter) [ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12) [ 3.034987] i8042: [1124] d4 -> i8042 (command) [ 3.035149] i8042: [1124] 28 -> i8042 (parameter) [ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12) [ 3.037436] i8042: [1127] d4 -> i8042 (command) [ 3.037600] i8042: [1127] f3 -> i8042 (parameter) [ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12) [ 3.040490] i8042: [1130] d4 -> i8042 (command) [ 3.040757] i8042: [1130] 14 -> i8042 (parameter) [ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12) [ 3.043034] i8042: [1132] d4 -> i8042 (command) [ 3.043198] i8042: [1132] f3 -> i8042 (parameter) [ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12) [ 3.046243] i8042: [1135] d4 -> i8042 (command) [ 3.046408] i8042: [1135] 14 -> i8042 (parameter) [ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12) [ 3.048718] i8042: [1138] d4 -> i8042 (command) [ 3.048882] i8042: [1138] f3 -> i8042 (parameter) [ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12) [ 3.051926] i8042: [1141] d4 -> i8042 (command) [ 3.052194] i8042: [1141] 3c -> i8042 (parameter) [ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12) [ 3.054467] i8042: [1144] d4 -> i8042 (command) [ 3.054630] i8042: [1144] f3 -> i8042 (parameter) [ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12) [ 3.060853] i8042: [1150] d4 -> i8042 (command) [ 3.061069] i8042: [1150] 28 -> i8042 (parameter) [ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12) [ 3.063316] i8042: [1153] d4 -> i8042 (command) [ 3.063479] i8042: [1153] f3 -> i8042 (parameter) [ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12) [ 3.066166] i8042: [1155] d4 -> i8042 (command) [ 3.066329] i8042: [1155] 14 -> i8042 (parameter) [ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12) [ 3.068608] i8042: [1158] d4 -> i8042 (command) [ 3.068772] i8042: [1158] f3 -> i8042 (parameter) [ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12) [ 3.071780] i8042: [1161] d4 -> i8042 (command) [ 3.071943] i8042: [1161] 14 -> i8042 (parameter) [ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12) [ 3.074285] i8042: [1164] d4 -> i8042 (command) [ 3.074448] i8042: [1164] f2 -> i8042 (parameter) [ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12) [ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12) [ 3.077922] i8042: [1167] d4 -> i8042 (command) [ 3.078085] i8042: [1167] e8 -> i8042 (parameter) [ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12) [ 3.080830] i8042: [1170] d4 -> i8042 (command) [ 3.081046] i8042: [1170] 00 -> i8042 (parameter) [ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12) [ 3.083288] i8042: [1173] d4 -> i8042 (command) [ 3.083555] i8042: [1173] e8 -> i8042 (parameter) [ 3.085294] IO APIC #2...... [ 3.085295] .... register #00: 02000000 [ 3.085296] ....... : physical APIC id: 02 [ 3.085297] ....... : Delivery Type: 0 [ 3.085298] ....... : LTS : 0 [ 3.085299] .... register #01: 00170020 [ 3.085300] ....... : max redirection entries: 17 [ 3.085301] ....... : PRQ implemented: 0 [ 3.085302] ....... : IO APIC version: 20 [ 3.085302] .... IRQ redirection table: [ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: [ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00 [ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01 [ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02 [ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03 [ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04 [ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05 [ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06 [ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07 [ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08 [ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09 [ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A [ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B [ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C [ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D [ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E [ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F [ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10 [ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11 [ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00 [ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13 [ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14 [ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00 [ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00 [ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17 [ 3.085428] IRQ to pin mappings: [ 3.085429] IRQ0 -> 0:2 [ 3.085431] IRQ1 -> 0:1 [ 3.085432] IRQ3 -> 0:3 [ 3.085433] IRQ4 -> 0:4 [ 3.085435] IRQ5 -> 0:5 [ 3.085436] IRQ6 -> 0:6 [ 3.085437] IRQ7 -> 0:7 [ 3.085438] IRQ8 -> 0:8 [ 3.085440] IRQ9 -> 0:9 [ 3.085441] IRQ10 -> 0:10 [ 3.085443] IRQ11 -> 0:11 [ 3.085444] IRQ12 -> 0:12 [ 3.085445] IRQ13 -> 0:13 [ 3.085446] IRQ14 -> 0:14 [ 3.085448] IRQ15 -> 0:15 [ 3.085449] IRQ16 -> 0:16 [ 3.085450] IRQ17 -> 0:17 [ 3.085451] IRQ19 -> 0:19 [ 3.085453] IRQ20 -> 0:20 [ 3.085454] IRQ23 -> 0:23 [ 3.085455] .................................... done. [ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12) [ 3.086492] i8042: [1176] d4 -> i8042 (command) [ 3.086656] i8042: [1176] 00 -> i8042 (parameter) [ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12) [ 3.089102] i8042: [1178] d4 -> i8042 (command) [ 3.089370] i8042: [1178] e8 -> i8042 (parameter) [ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12) [ 3.092012] i8042: [1181] d4 -> i8042 (command) [ 3.092227] i8042: [1181] 00 -> i8042 (parameter) [ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12) [ 3.094483] i8042: [1184] d4 -> i8042 (command) [ 3.094648] i8042: [1184] e8 -> i8042 (parameter) [ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12) [ 3.097161] i8042: [1186] d4 -> i8042 (command) [ 3.097427] i8042: [1186] 00 -> i8042 (parameter) [ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12) [ 3.099675] i8042: [1189] d4 -> i8042 (command) [ 3.099838] i8042: [1189] e9 -> i8042 (parameter) [ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12) [ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12) [ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12) [ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12) [ 3.105799] i8042: [1195] d4 -> i8042 (command) [ 3.106067] i8042: [1195] f6 -> i8042 (parameter) [ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12) [ 3.108600] i8042: [1198] d4 -> i8042 (command) [ 3.108762] i8042: [1198] e8 -> i8042 (parameter) [ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12) [ 3.111677] i8042: [1201] d4 -> i8042 (command) [ 3.111945] i8042: [1201] 00 -> i8042 (parameter) [ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12) [ 3.114254] i8042: [1204] d4 -> i8042 (command) [ 3.114522] i8042: [1204] e6 -> i8042 (parameter) [ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12) [ 3.117214] i8042: [1207] d4 -> i8042 (command) [ 3.117378] i8042: [1207] e6 -> i8042 (parameter) [ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12) [ 3.119715] i8042: [1209] d4 -> i8042 (command) [ 3.119880] i8042: [1209] e6 -> i8042 (parameter) [ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12) [ 3.123105] i8042: [1212] d4 -> i8042 (command) [ 3.123320] i8042: [1212] e9 -> i8042 (parameter) [ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12) [ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12) [ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12) [ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12) [ 3.128731] i8042: [1218] d4 -> i8042 (command) [ 3.128894] i8042: [1218] f6 -> i8042 (parameter) [ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12) [ 3.132101] i8042: [1221] d4 -> i8042 (command) [ 3.132265] i8042: [1221] f5 -> i8042 (parameter) [ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12) [ 3.134786] i8042: [1224] d4 -> i8042 (command) [ 3.134949] i8042: [1224] e6 -> i8042 (parameter) [ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12) [ 3.137773] i8042: [1227] d4 -> i8042 (command) [ 3.137935] i8042: [1227] e6 -> i8042 (parameter) [ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12) [ 3.140385] i8042: [1230] d4 -> i8042 (command) [ 3.140654] i8042: [1230] e6 -> i8042 (parameter) [ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12) [ 3.143076] i8042: [1232] d4 -> i8042 (command) [ 3.143291] i8042: [1232] e9 -> i8042 (parameter) [ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12) [ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12) [ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12) [ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12) [ 3.148796] i8042: [1238] d4 -> i8042 (command) [ 3.148959] i8042: [1238] e8 -> i8042 (parameter) [ 3.151988] PM: Checking hibernation image partition /dev/system/swap [ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12) [ 3.152134] i8042: [1241] d4 -> i8042 (command) [ 3.152298] i8042: [1242] 03 -> i8042 (parameter) [ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12) [ 3.154707] i8042: [1244] d4 -> i8042 (command) [ 3.154818] i8042: [1244] e6 -> i8042 (parameter) [ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12) [ 3.157971] i8042: [1247] d4 -> i8042 (command) [ 3.158134] i8042: [1247] e6 -> i8042 (parameter) [ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12) [ 3.160558] i8042: [1250] d4 -> i8042 (command) [ 3.160669] i8042: [1250] e6 -> i8042 (parameter) [ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12) [ 3.163788] i8042: [1253] d4 -> i8042 (command) [ 3.163900] i8042: [1253] e9 -> i8042 (parameter) [ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12) [ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12) [ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12) [ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12) [ 3.169856] i8042: [1259] d4 -> i8042 (command) [ 3.169966] i8042: [1259] e8 -> i8042 (parameter) [ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12) [ 3.173421] i8042: [1263] d4 -> i8042 (command) [ 3.173639] i8042: [1263] 00 -> i8042 (parameter) [ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12) [ 3.176044] i8042: [1265] d4 -> i8042 (command) [ 3.176209] i8042: [1265] e6 -> i8042 (parameter) [ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12) [ 3.178820] i8042: [1268] d4 -> i8042 (command) [ 3.178931] i8042: [1268] e6 -> i8042 (parameter) [ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12) [ 3.181499] i8042: [1271] d4 -> i8042 (command) [ 3.182240] i8042: [1271] e6 -> i8042 (parameter) [ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12) [ 3.184842] i8042: [1274] d4 -> i8042 (command) [ 3.184954] i8042: [1274] e9 -> i8042 (parameter) [ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12) [ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12) [ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12) [ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12) [ 3.190841] i8042: [1280] d4 -> i8042 (command) [ 3.190953] i8042: [1280] e1 -> i8042 (parameter) [ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.259900] hub 2-1:1.0: USB hub found [ 3.281547] hub 2-1:1.0: 8 ports detected [ 3.299961] ata5: SATA link down (SStatus 0 SControl 300) [ 3.389927] i8042: [1480] d4 -> i8042 (command) [ 3.390091] i8042: [1480] 0a -> i8042 (parameter) [ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=642a [ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.589561] i8042: [1680] d4 -> i8042 (command) [ 3.589671] i8042: [1680] f5 -> i8042 (parameter) [ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12) [ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM [ 3.604613] i8042: [1695] d4 -> i8042 (command) [ 3.604725] i8042: [1695] f3 -> i8042 (parameter) [ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12) [ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00 [ 3.626320] i8042: [1716] d4 -> i8042 (command) [ 3.626484] i8042: [1716] 66 -> i8042 (parameter) [ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12) [ 3.648259] i8042: [1738] d4 -> i8042 (command) [ 3.648424] i8042: [1738] 88 -> i8042 (parameter) [ 3.678465] i8042: [1769] d4 -> i8042 (command) [ 3.678643] i8042: [1769] f3 -> i8042 (parameter) [ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12) [ 3.681225] i8042: [1771] d4 -> i8042 (command) [ 3.681336] i8042: [1771] f4 -> i8042 (parameter) [ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12) [ 3.684574] i8042: [1775] d4 -> i8042 (command) [ 3.684791] i8042: [1775] f6 -> i8042 (parameter) [ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12) [ 3.688507] i8042: [1779] d4 -> i8042 (command) [ 3.689512] i8042: [1779] ff -> i8042 (parameter) [ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12) [ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd [ 3.838521] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12) [ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12) [ 3.893215] i8042: [1984] d4 -> i8042 (command) [ 3.893483] i8042: [1984] f3 -> i8042 (parameter) [ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12) [ 3.896676] i8042: [1987] d4 -> i8042 (command) [ 3.896787] i8042: [1987] c8 -> i8042 (parameter) [ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12) [ 3.899238] i8042: [1990] d4 -> i8042 (command) [ 3.899454] i8042: [1990] f3 -> i8042 (parameter) [ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12) [ 3.902664] i8042: [1993] d4 -> i8042 (command) [ 3.902775] i8042: [1993] 64 -> i8042 (parameter) [ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12) [ 3.905283] i8042: [1996] d4 -> i8042 (command) [ 3.905973] i8042: [1996] f3 -> i8042 (parameter) [ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12) [ 3.908653] i8042: [1999] d4 -> i8042 (command) [ 3.908765] i8042: [1999] 50 -> i8042 (parameter) [ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12) [ 3.911743] i8042: [2002] d4 -> i8042 (command) [ 3.911855] i8042: [2002] f2 -> i8042 (parameter) [ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12) [ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12) [ 3.915406] i8042: [2006] d4 -> i8042 (command) [ 3.916096] i8042: [2006] f3 -> i8042 (parameter) [ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12) [ 3.918752] i8042: [2009] d4 -> i8042 (command) [ 3.918864] i8042: [2009] c8 -> i8042 (parameter) [ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12) [ 3.921958] i8042: [2012] d4 -> i8042 (command) [ 3.922122] i8042: [2012] f3 -> i8042 (parameter) [ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12) [ 3.924738] i8042: [2015] d4 -> i8042 (command) [ 3.924850] i8042: [2015] c8 -> i8042 (parameter) [ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12) [ 3.927502] i8042: [2018] d4 -> i8042 (command) [ 3.927667] i8042: [2018] f3 -> i8042 (parameter) [ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12) [ 3.930313] i8042: [2021] d4 -> i8042 (command) [ 3.931428] i8042: [2021] 50 -> i8042 (parameter) [ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12) [ 3.933824] i8042: [2024] d4 -> i8042 (command) [ 3.933936] i8042: [2024] f2 -> i8042 (parameter) [ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12) [ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12) [ 3.937931] i8042: [2028] d4 -> i8042 (command) [ 3.938042] i8042: [2028] f3 -> i8042 (parameter) [ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12) [ 3.941554] i8042: [2032] d4 -> i8042 (command) [ 3.941770] i8042: [2032] c8 -> i8042 (parameter) [ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12) [ 3.944219] i8042: [2035] d4 -> i8042 (command) [ 3.944330] i8042: [2035] f3 -> i8042 (parameter) [ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12) [ 3.947324] i8042: [2038] d4 -> i8042 (command) [ 3.947488] i8042: [2038] 64 -> i8042 (parameter) [ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12) [ 3.949903] i8042: [2040] d4 -> i8042 (command) [ 3.950015] i8042: [2040] f3 -> i8042 (parameter) [ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12) [ 3.952941] i8042: [2043] d4 -> i8042 (command) [ 3.953053] i8042: [2043] 50 -> i8042 (parameter) [ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12) [ 3.955589] i8042: [2046] d4 -> i8042 (command) [ 3.955753] i8042: [2046] f2 -> i8042 (parameter) [ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12) [ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12) [ 3.959980] i8042: [2051] d4 -> i8042 (command) [ 3.960092] i8042: [2051] f3 -> i8042 (parameter) [ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12) [ 3.963213] i8042: [2054] d4 -> i8042 (command) [ 3.963378] i8042: [2054] 64 -> i8042 (parameter) [ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12) [ 3.965945] i8042: [2056] d4 -> i8042 (command) [ 3.966056] i8042: [2056] e8 -> i8042 (parameter) [ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12) [ 3.968794] i8042: [2059] d4 -> i8042 (command) [ 3.968959] i8042: [2059] 03 -> i8042 (parameter) [ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12) [ 3.971398] i8042: [2062] d4 -> i8042 (command) [ 3.974350] i8042: [2062] e6 -> i8042 (parameter) [ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12) [ 3.977018] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 4.000810] i8042: [2091] d4 -> i8042 (command) [ 4.000921] i8042: [2091] f4 -> i8042 (parameter) [ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12) [ 4.003598] PM: Hibernation image not present or could not be loaded. [ 4.003620] registered taskstats version 1 [ 4.035412] Magic number: 7:990:357 [ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27 01:23:24 UTC (1324949004) [ 4.085662] Freeing unused kernel memory: 944k freed [ 4.110469] Write protecting the kernel read-only data: 12288k [ 4.135741] Freeing unused kernel memory: 192k freed [ 4.164739] Freeing unused kernel memory: 1944k freed [ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.266531] shpchp: shpcd_init: pci_register_driver = 0 [ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.322294] udevd[131]: starting version 173 [ 4.356829] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 4.393554] ACPI: Power Button [PWRB] [ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.393743] ACPI: Thermal Zone [TZ00] (54 C) [ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.393981] ACPI: Thermal Zone [TZ01] (54 C) [ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found 0000:04:00.0[A] _PRT entry [ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 4.523002] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.523047] usb usb3: Product: xHCI Host Controller [ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.523050] usb usb3: SerialNumber: 0000:04:00.0 [ 4.523265] xHCI xhci_add_endpoint called for root hub [ 4.523267] xHCI xhci_check_bandwidth called for root hub [ 4.523328] hub 3-0:1.0: USB hub found [ 4.523339] hub 3-0:1.0: 2 ports detected [ 4.523379] ACPI: Sleep Button [SLPB] [ 4.523426] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 4.524286] ACPI: Lid Switch [LID0] [ 4.524340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.524373] ACPI: Power Button [PWRF] [ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.526220] usb usb4: Product: xHCI Host Controller [ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.526223] usb usb4: SerialNumber: 0000:04:00.0 [ 4.526375] xHCI xhci_add_endpoint called for root hub [ 4.526377] xHCI xhci_check_bandwidth called for root hub [ 4.526439] hub 4-0:1.0: USB hub found [ 4.526448] hub 4-0:1.0: 2 ports detected [ 4.526942] [drm] Initialized drm 1.1.0 20060810 [ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:02.0[A] _PRT entry [ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.531292] i915 0000:00:02.0: setting latency timer to 64 [ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.368667] [drm] Driver supports precise vblank timestamp query. [ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378837] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027 [ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.647346] usb 3-1: Product: USB Multimedia Keyboard [ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp. [ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6 [ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input0 [ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7 [ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input1 [ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608 [ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.895947] usb 3-2: Product: USB2.0 Hub [ 5.901665] hub 3-2:1.0: USB hub found [ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.911512] hub 3-2:1.0: 4 ports detected [ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000) [ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 5.950427] Console: switching to colour dummy device 80x25 [ 5.951515] fbcon: inteldrmfb (fb0) is primary device [ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd [ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0608 [ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.201327] usb 3-2.4: Product: USB2.0 Hub [ 6.202290] hub 3-2.4:1.0: USB hub found [ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.202925] hub 3-2.4:1.0: 4 ports detected [ 6.313235] Console: switching to colour frame buffer device 236x63 [ 6.334979] fb0: inteldrmfb frame buffer device [ 6.335054] drm: registered panic notifier [ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 6.338677] acpi device:2e: registered as cooling_device4 [ 6.338816] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8 [ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 6.343258] acpi device:32: registered as cooling_device5 [ 6.343536] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.402163] Btrfs loaded [ 6.443076] md: linear personality registered for level -1 [ 6.478910] device-mapper: uevent: version 1.0.3 [ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd [ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d, idProduct=c063 [ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse [ 6.519906] usb 3-2.4.4: Manufacturer: DELL [ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.536487] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10 [ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0 [ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000 [ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000 [ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000 [ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000 [ 39.517655] PM: Basic memory bitmaps created [ 39.540690] PM: Basic memory bitmaps freed [ 39.540694] video LNXVIDEO:00: Restoring backlight state [ 39.540695] video LNXVIDEO:01: Restoring backlight state [ 39.590164] PM: Starting manual resume from disk [ 39.595666] PM: Hibernation image partition 253:3 present [ 39.595669] PM: Looking for hibernation image. [ 39.597171] PM: Image not found (code -22) [ 39.597173] PM: Hibernation image not present or could not be loaded. [ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1 transid 21081 /dev/mapper/system-root [ 39.616353] btrfs: turning off barriers [ 39.616356] btrfs: enabling auto defrag [ 39.616357] btrfs: use lzo compression [ 39.616358] btrfs: disk space caching is enabled [ 39.661102] Btrfs detected SSD devices, enabling SSD mode [ 40.401467] btrfs: turning off barriers [ 40.407291] btrfs: enabling auto defrag [ 40.407352] btrfs: use lzo compression [ 40.418719] btrfs: disk space caching is enabled [ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>. [ 41.272117] udevd[606]: starting version 173 [ 41.435290] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:16.0[A] _PRT entry [ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.435834] mei 0000:00:16.0: setting latency timer to 64 [ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X [ 41.473031] iTCO_vendor_support: vendor-support=0 [ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found 0000:06:00.0[A] _PRT entry [ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64 [ 41.487779] mtp-probe[752]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1" [ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.3[C] _PRT entry [ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1 Dest:1) [ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device [ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 41.528598] mtp-probe[776]: checking bus 3, device 5: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4" [ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device [ 41.538647] btrfs: turning off barriers [ 41.538650] btrfs: enabling auto defrag [ 41.538653] btrfs: use lzo compression [ 41.538653] btrfs: disk space caching is enabled [ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.568681] mtp-probe[794]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4" [ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device [ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 41.597648] Bluetooth: Core ver 2.16 [ 41.603983] NET: Registered protocol family 31 [ 41.608008] ACPI: AC Adapter [ADP0] (on-line) [ 41.614610] Bluetooth: HCI device and connection manager initialized [ 41.614613] Bluetooth: HCI socket layer initialized [ 41.614615] Bluetooth: L2CAP socket layer initialized [ 41.614622] Bluetooth: SCO socket layer initialized [ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 41.654637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.681836] ACPI: Battery Slot [BAT0] (battery present) [ 41.687239] wmi: Mapper loaded [ 41.693494] Linux video capture interface: v2.00 [ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 41.702161] usbcore: registered new interface driver btusb [ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 41.742658] cfg80211: Calling CRDA to update world regulatory domain [ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 41.766095] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0c45:642a) [ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 41.778771] Copyright(c) 2003-2011 Intel Corporation [ 41.778833] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12 [ 41.778960] usbcore: registered new interface driver uvcvideo [ 41.778962] USB Video Class driver (1.1.1) [ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1b.0[A] _PRT entry [ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found 0000:03:00.0[A] _PRT entry [ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64 [ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000 [ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X [ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0 [ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 41.829386] ifup[893]: Service network not started and mode 'auto' -> skipping [ 41.852847] cfg80211: World regulatory domain updated: [ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22 Mode:1 Active:1 Dest:1) [ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13 [ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1 build 33993 [ 41.940849] Registered led device: phy0-led [ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 42.010557] ifup[964]: Service network not started and mode 'auto' -> skipping [ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap. Priority:0 extents:1 across:2097148k SS [ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d [ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1 [ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1 [ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007 [ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a [ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5 [ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1 [ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0 [ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1 [ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0 [ 45.437901] ALSA hda_codec.c:4964 inputs: [ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12 [ 45.437904] ALSA hda_codec.c:4968 Mic=0x18 [ 45.437905] ALSA hda_codec.c:4970 [ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d [ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269 [ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 45.453689] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 45.458609] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active. [ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros, 137097/159744 bloques [ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1 transid 22126 /dev/mapper/system-home [ 45.829949] btrfs: turning off barriers [ 45.834896] btrfs: enabling auto defrag [ 45.834957] btrfs: use lzo compression [ 45.840735] EXT4-fs (sda1): barriers disabled [ 45.849518] btrfs: disk space caching is enabled [ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: acl,barrier=0,data=writeback,user_xattr [ 45.869431] Btrfs detected SSD devices, enabling SSD mode [ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.174581] Bluetooth: BNEP filters: protocol multicast [ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.337233] Bluetooth: RFCOMM TTY layer initialized [ 47.337238] Bluetooth: RFCOMM socket layer initialized [ 47.337239] Bluetooth: RFCOMM ver 1.11 [ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X [ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 47.648775] NET: Registered protocol family 17 [ 48.961311] EXT4-fs (sda1): re-mounted. Opts: acl,barrier=0,data=writeback,user_xattr,commit=0 [ 96.852567] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 96.855107] wlan0: authenticated [ 96.896863] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 96.903865] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 96.903869] wlan0: associated [ 106.895705] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 106.909897] cfg80211: Calling CRDA to update world regulatory domain [ 106.912356] cfg80211: World regulatory domain updated: [ 106.912359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 106.912361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.912363] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.912365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.912366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.912367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 110.146828] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 110.149314] wlan0: authenticated [ 110.154157] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 110.159155] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 110.159157] wlan0: associated [ 120.042706] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 120.054236] cfg80211: Calling CRDA to update world regulatory domain [ 120.056757] cfg80211: World regulatory domain updated: [ 120.056761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 120.056763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.056764] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 120.056766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 120.056767] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.056769] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 138.190818] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 138.193402] wlan0: authenticated [ 138.196754] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 138.201826] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 138.201840] wlan0: associated [ 148.192646] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 148.206339] cfg80211: Calling CRDA to update world regulatory domain [ 148.208741] cfg80211: World regulatory domain updated: [ 148.208744] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 148.208746] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 148.208748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 148.208749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 148.208751] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 148.208752] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 151.443088] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 151.445498] wlan0: authenticated [ 151.446657] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 151.451688] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 151.451691] wlan0: associated [ 159.980012] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 159.992768] cfg80211: Calling CRDA to update world regulatory domain [ 159.995101] cfg80211: World regulatory domain updated: [ 159.995104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 159.995106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.995108] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 159.995109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 159.995111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.995112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 172.519660] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 172.522038] wlan0: authenticated [ 172.525229] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 172.530226] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 172.530229] wlan0: associated root@xps15z:/home/crrodriguez # systemctl restart NetworkManager.service root@xps15z:/home/crrodriguez # dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-rc6-3-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Dec 22 15:05:54 UTC 2011 (c4246bf) [ 0.000000] Command line: root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9 resume=/dev/system/swap splash=verbose clocksource=hpet hpet64 ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug i8042.debug vga=0x31b [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable) [ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved) [ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable) [ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved) [ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved) [ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved) [ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved) [ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved) [ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS A08 12/13/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes. [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bac85000-bac8f000 [ 0.000000] RAMDISK: 373d9000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf40000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000-ffff88023e3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000b5a28 [ 0.000000] 0: 0x000b6e29 -> 0x000b886a [ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2069459 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31 [ 0.000000] Normal zone: 17913 pages used for memmap [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5a28000 - 00000000b6e29000 [ 0.000000] PM: Registered nosave memory: 00000000b886a000 - 00000000b8ab3000 [ 0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bad2e000 [ 0.000000] PM: Registered nosave memory: 00000000bad2e000 - 00000000bad3d000 [ 0.000000] PM: Registered nosave memory: 00000000bad3d000 - 00000000badfb000 [ 0.000000] PM: Registered nosave memory: 00000000badfb000 - 00000000badfd000 [ 0.000000] PM: Registered nosave memory: 00000000badfd000 - 00000000badff000 [ 0.000000] PM: Registered nosave memory: 00000000badff000 - 00000000bae02000 [ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae0a000 [ 0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000 [ 0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf18000 [ 0.000000] PM: Registered nosave memory: 00000000baf18000 - 00000000baf1c000 [ 0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000 [ 0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744 r8192 d22656 u262144 [ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037205 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9 resume=/dev/system/swap splash=verbose clocksource=hpet hpet64 ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug i8042.debug vga=0x31b [ 0.000000] bootsplash: verbose mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code, 1157300k absent, 210492k reserved, 7648k data, 944k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet timer0 configured in 64-bit mode [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2793.229 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.45 BogoMIPS (lpj=2793229) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000049] AppArmor: AppArmor initialized [ 0.000647] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002144] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002776] Mount-cache hash table entries: 256 [ 0.002859] Initializing cgroup subsys cpuacct [ 0.002863] Initializing cgroup subsys memory [ 0.002877] Initializing cgroup subsys devices [ 0.002880] Initializing cgroup subsys freezer [ 0.002882] Initializing cgroup subsys net_cls [ 0.002884] Initializing cgroup subsys blkio [ 0.002890] Initializing cgroup subsys perf_event [ 0.002912] Disabled fast string operations [ 0.002915] CPU: Physical Processor ID: 0 [ 0.002917] CPU: Processor Core ID: 0 [ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002922] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002927] mce: CPU supports 7 MCE banks [ 0.002936] CPU0: Thermal monitoring handled by SMI [ 0.002941] using mwait in idle threads. [ 0.003584] ACPI: Core revision 20110623 [ 0.059768] Getting VERSION: 1060015 [ 0.059771] Getting VERSION: 1060015 [ 0.059773] Getting ID: 0 [ 0.059774] Getting ID: 0 [ 0.059783] DMAR: Host address width 36 [ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.059881] HPET id 0 under DRHD base 0xfed91000 [ 0.059884] HPET id 0 under DRHD base 0xfed91000 [ 0.059886] HPET id 0 under DRHD base 0xfed91000 [ 0.059888] HPET id 0 under DRHD base 0xfed91000 [ 0.059890] HPET id 0 under DRHD base 0xfed91000 [ 0.059892] HPET id 0 under DRHD base 0xfed91000 [ 0.059894] HPET id 0 under DRHD base 0xfed91000 [ 0.059896] HPET id 0 under DRHD base 0xfed91000 [ 0.060143] Enabled IRQ remapping in x2apic mode [ 0.060146] Enabling x2apic [ 0.060148] Enabled x2apic [ 0.060153] Switched APIC routing to cluster x2apic. [ 0.060158] enabled ExtINT on CPU#0 [ 0.060404] ESR value before enabling vector: 0x00000080 after: 0x00000000 [ 0.060421] ENABLING IO-APIC IRQs [ 0.060423] init IO_APIC IRQs [ 0.060424] apic 2 pin 0 not connected [ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) [ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) [ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) [ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060535] apic 2 pin 16 not connected [ 0.060536] apic 2 pin 17 not connected [ 0.060537] apic 2 pin 18 not connected [ 0.060538] apic 2 pin 19 not connected [ 0.060538] apic 2 pin 20 not connected [ 0.060539] apic 2 pin 21 not connected [ 0.060540] apic 2 pin 22 not connected [ 0.060541] apic 2 pin 23 not connected [ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07 [ 0.070671] Using local APIC timer interrupts. [ 0.070671] calibrating APIC timer ... [ 0.172123] ... lapic delta = 623574 [ 0.172125] ... PM-Timer delta = 357949 [ 0.172126] ... PM-Timer result ok [ 0.172128] ..... delta 623574 [ 0.172130] ..... mult: 26786370 [ 0.172132] ..... calibration result: 99771 [ 0.172134] ..... CPU clock speed is 2793.0611 MHz. [ 0.172136] ..... host bus clock speed is 99.0771 MHz. [ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.172150] PEBS disabled due to CPU errata. [ 0.172154] ... version: 3 [ 0.172155] ... bit width: 48 [ 0.172157] ... generic registers: 4 [ 0.172159] ... value mask: 0000ffffffffffff [ 0.172162] ... max period: 000000007fffffff [ 0.172164] ... fixed-purpose events: 3 [ 0.172166] ... event mask: 000000070000000f [ 0.180330] NMI watchdog enabled, takes one hw-pmu counter. [ 0.188150] Booting Node 0, Processors #1 [ 0.188160] smpboot cpu 1: start_ip = 98000 [ 0.199162] masked ExtINT on CPU#1 [ 0.259011] Disabled fast string operations [ 0.259023] CPU1: Thermal monitoring handled by SMI [ 0.279047] NMI watchdog enabled, takes one hw-pmu counter. [ 0.285004] #2 [ 0.285010] smpboot cpu 2: start_ip = 98000 [ 0.296013] masked ExtINT on CPU#2 [ 0.355853] Disabled fast string operations [ 0.355864] CPU2: Thermal monitoring handled by SMI [ 0.375921] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381847] #3 [ 0.381852] smpboot cpu 3: start_ip = 98000 [ 0.392852] masked ExtINT on CPU#3 [ 0.452696] Disabled fast string operations [ 0.452707] CPU3: Thermal monitoring handled by SMI [ 0.472765] NMI watchdog enabled, takes one hw-pmu counter. [ 0.474664] Brought up 4 CPUs [ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS). [ 0.478171] devtmpfs: initialized [ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes) [ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes) [ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes) [ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes) [ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes) [ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes) [ 0.479061] print_constraints: dummy: [ 0.479091] RTC time: 1:23:20, date: 12/27/11 [ 0.479128] NET: Registered protocol family 16 [ 0.479269] ACPI: bus type pci registered [ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.489012] PCI: Using configuration type 1 for base access [ 0.489769] bio: create slab <bio-0> at 0 [ 0.489840] ACPI: Added _OSI(Module Device) [ 0.489843] ACPI: Added _OSI(Processor Device) [ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.489848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.491351] ACPI: EC: Look up EC in DSDT [ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code [ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.500979] ACPI: Dynamic OEM Table Load: [ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.506495] ACPI: Dynamic OEM Table Load: [ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.509171] ACPI: Dynamic OEM Table Load: [ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.514717] ACPI: Interpreter enabled [ 0.514722] ACPI: (supports S0 S3 S4 S5) [ 0.514744] ACPI: Using IOAPIC for interrupt routing [ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.520446] ACPI: No dock devices found. [ 0.520448] HEST: Table not found. [ 0.520451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.520852] \_SB_.PCI0:_OSC invalid UUID [ 0.520853] _OSC request data:1 8 1f [ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.521540] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.521544] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.521548] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.521613] pci 0000:00:01.0: PME# disabled [ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.521778] pci 0000:00:16.0: PME# disabled [ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.521902] pci 0000:00:1a.0: PME# disabled [ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.521994] pci 0000:00:1b.0: PME# disabled [ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.522079] pci 0000:00:1c.0: PME# disabled [ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.522166] pci 0000:00:1c.1: PME# disabled [ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.522253] pci 0000:00:1c.3: PME# disabled [ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.522339] pci 0000:00:1c.4: PME# disabled [ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.522426] pci 0000:00:1c.5: PME# disabled [ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.522548] pci 0000:00:1d.0: PME# disabled [ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot [ 0.522774] pci 0000:00:1f.2: PME# disabled [ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.524626] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 [ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.525652] pci 0000:03:00.0: PME# disabled [ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.527917] pci 0000:04:00.0: PME# disabled [ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200 [ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit] [ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529910] pci 0000:06:00.0: PME# disabled [ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.531763] 0000:00:1f[A] -> [21] [ 0.531766] 0000:00:1f[B] -> [19] [ 0.531769] 0000:00:1f[C] -> [18] [ 0.531771] 0000:00:1f[D] -> [16] [ 0.531773] 0000:00:1d[A] -> [23] [ 0.531776] 0000:00:1a[A] -> [16] [ 0.531778] 0000:00:1b[A] -> [22] [ 0.531781] 0000:00:16[A] -> [16] [ 0.531783] 0000:00:16[B] -> [19] [ 0.531785] 0000:00:16[C] -> [18] [ 0.531788] 0000:00:16[D] -> [17] [ 0.531790] 0000:00:1c[A] -> [16] [ 0.531792] 0000:00:1c[B] -> [17] [ 0.531795] 0000:00:1c[C] -> [18] [ 0.531797] 0000:00:1c[D] -> [19] [ 0.531799] 0000:00:01[A] -> [16] [ 0.531802] 0000:00:01[B] -> [17] [ 0.531804] 0000:00:01[C] -> [18] [ 0.531806] 0000:00:01[D] -> [19] [ 0.531809] 0000:00:02[A] -> [16] [ 0.531811] 0000:00:04[A] -> [16] [ 0.531813] 0000:00:04[B] -> [17] [ 0.531816] 0000:00:04[C] -> [18] [ 0.531818] 0000:00:04[D] -> [19] [ 0.531840] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.0 is a PCI bridge [ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.531874] 0000:02:00[A] -> [16] [ 0.531877] 0000:02:00[B] -> [17] [ 0.531879] 0000:02:00[C] -> [18] [ 0.531882] 0000:02:00[D] -> [19] [ 0.531890] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.1 is a PCI bridge [ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.531923] 0000:03:00[A] -> [17] [ 0.531925] 0000:03:00[B] -> [18] [ 0.531928] 0000:03:00[C] -> [19] [ 0.531930] 0000:03:00[D] -> [16] [ 0.531940] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.3 is a PCI bridge [ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.531972] 0000:04:00[A] -> [19] [ 0.531974] 0000:04:00[B] -> [16] [ 0.531977] 0000:04:00[C] -> [17] [ 0.531979] 0000:04:00[D] -> [18] [ 0.531988] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.4 is a PCI bridge [ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.532020] 0000:05:00[A] -> [16] [ 0.532023] 0000:05:00[B] -> [17] [ 0.532025] 0000:05:00[C] -> [18] [ 0.532028] 0000:05:00[D] -> [19] [ 0.532053] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.5 is a PCI bridge [ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.532085] 0000:06:00[A] -> [17] [ 0.532087] 0000:06:00[B] -> [18] [ 0.532090] 0000:06:00[C] -> [19] [ 0.532092] 0000:06:00[D] -> [16] [ 0.532109] pci_bind-0085 [00] pci_bind : Device 0000:00:01.0 is a PCI bridge [ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.532141] 0000:01:00[A] -> [16] [ 0.532143] 0000:01:00[B] -> [17] [ 0.532146] 0000:01:00[C] -> [18] [ 0.532148] 0000:01:00[D] -> [19] [ 0.532198] \_SB_.PCI0:_OSC invalid UUID [ 0.532198] _OSC request data:1 1f 1f [ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.532239] \_SB_.PCI0:_OSC invalid UUID [ 0.532240] _OSC request data:1 0 1d [ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.536069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.536078] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.536083] vgaarb: loaded [ 0.536085] vgaarb: bridge control possible 0000:01:00.0 [ 0.536087] vgaarb: no bridge control possible 0000:00:02.0 [ 0.536179] SCSI subsystem initialized [ 0.536213] libata version 3.00 loaded. [ 0.536245] usbcore: registered new interface driver usbfs [ 0.536257] usbcore: registered new interface driver hub [ 0.536277] usbcore: registered new device driver usb [ 0.536324] PCI: Using ACPI for IRQ routing [ 0.537738] PCI: pci_cache_line_size set to 64 bytes [ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff [ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff [ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff [ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.537947] NetLabel: Initializing [ 0.537950] NetLabel: domain hash size = 128 [ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.537961] NetLabel: unlabeled traffic allowed by default [ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.539993] Switching to clocksource hpet [ 0.541903] AppArmor: AppArmor Filesystem Enabled [ 0.541922] pnp: PnP ACPI init [ 0.541934] ACPI: bus type pnp registered [ 0.542307] pnp 00:00: [bus 00-3e] [ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.542313] pnp 00:00: [io 0x0d00-0xffff window] [ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.542387] pnp 00:01: [io 0x0000-0x001f] [ 0.542389] pnp 00:01: [io 0x0081-0x0091] [ 0.542390] pnp 00:01: [io 0x0093-0x009f] [ 0.542391] pnp 00:01: [io 0x00c0-0x00df] [ 0.542392] pnp 00:01: [dma 4] [ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.542511] pnp 00:03: [io 0x00f0] [ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542525] pnp 00:03: [irq 13] [ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.542550] pnp 00:04: [io 0x002e-0x002f] [ 0.542551] pnp 00:04: [io 0x004e-0x004f] [ 0.542553] pnp 00:04: [io 0x0061] [ 0.542555] pnp 00:04: [io 0x0063] [ 0.542556] pnp 00:04: [io 0x0065] [ 0.542557] pnp 00:04: [io 0x0067] [ 0.542558] pnp 00:04: [io 0x0068] [ 0.542559] pnp 00:04: [io 0x006c] [ 0.542560] pnp 00:04: [io 0x0070] [ 0.542561] pnp 00:04: [io 0x0080] [ 0.542562] pnp 00:04: [io 0x0092] [ 0.542563] pnp 00:04: [io 0x00b2-0x00b3] [ 0.542564] pnp 00:04: [io 0x0680-0x069f] [ 0.542566] pnp 00:04: [io 0x1000-0x1003] [ 0.542567] pnp 00:04: [io 0x1004-0x1013] [ 0.542568] pnp 00:04: [io 0xffff] [ 0.542569] pnp 00:04: [io 0x0400-0x0453] [ 0.542570] pnp 00:04: [io 0x0458-0x047f] [ 0.542571] pnp 00:04: [io 0x0500-0x057f] [ 0.542573] pnp 00:04: [io 0x164e-0x164f] [ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.542616] system 00:04: [io 0xffff] has been reserved [ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.542639] pnp 00:05: [io 0x0070-0x0077] [ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542649] pnp 00:05: [irq 8] [ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.542692] pnp 00:06: [io 0x0454-0x0457] [ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.542760] pnp 00:07: [io 0x0060] [ 0.542761] pnp 00:07: [io 0x0064] [ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542770] pnp 00:07: [irq 1] [ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542824] pnp 00:08: [irq 12] [ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13 (active) [ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20 Mode:0 Active:0 Dest:1) [ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.543177] pnp 00:0a: [irq 20] [ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.543336] pnp: PnP ACPI: found 11 devices [ 0.543338] ACPI: ACPI bus type pnp unregistered [ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.549785] PCI: max bus depth: 1 pci_try_num: 2 [ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.549842] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:01.0[A] _PRT entry [ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16 Mode:1 Active:1 Dest:1) [ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549948] pci 0000:00:01.0: setting latency timer to 64 [ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.0[A] _PRT entry [ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549965] pci 0000:00:1c.0: setting latency timer to 64 [ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.1[B] _PRT entry [ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1 Dest:1) [ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.549988] pci 0000:00:1c.1: setting latency timer to 64 [ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.3[D] _PRT entry [ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1 Dest:1) [ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.550011] pci 0000:00:1c.3: setting latency timer to 64 [ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.4[A] _PRT entry [ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550027] pci 0000:00:1c.4: setting latency timer to 64 [ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.5[B] _PRT entry [ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.550050] pci 0000:00:1c.5: setting latency timer to 64 [ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff] [ 0.550125] NET: Registered protocol family 2 [ 0.550318] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.551888] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.553157] TCP: Hash tables configured (established 524288 bind 65536) [ 0.553161] TCP reno registered [ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553308] NET: Registered protocol family 1 [ 0.553322] pci 0000:00:02.0: Boot video device [ 0.553459] PCI: CLS 64 bytes, default 64 [ 0.553496] Unpacking initramfs... [ 0.723042] Freeing initrd memory: 12380k freed [ 0.724650] DMAR: No ATSR found [ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation [ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation [ 0.724692] IOMMU: Setting RMRR: [ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0 [0xbb800000 - 0xbf9fffff] [ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbae1d000 - 0xbae33fff] [ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbae1d000 - 0xbae33fff] [ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.727095] audit: initializing netlink socket (disabled) [ 0.727106] type=2000 audit(1324949000.518:1): initialized [ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.765057] VFS: Disk quotas dquot_6.5.2 [ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.765302] msgmni has been set to 15909 [ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.765486] io scheduler noop registered (default) [ 0.765491] io scheduler deadline registered [ 0.765508] io scheduler cfq registered [ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11 [ 0.765917] vesafb: scrolling: redraw [ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 10240k, total 65472k [ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture... [ 0.767739] bootsplash: silentjpeg size 109002 bytes [ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3). [ 0.778101] bootsplash: silentjpeg size 126037 bytes [ 0.882677] Console: switching to colour frame buffer device 156x60 [ 0.962069] fb0: VESA VGA frame buffer device [ 0.962474] intel_idle: MWAIT substates: 0x21120 [ 0.962475] intel_idle: v0.4 model 0x2A [ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.962518] ERST: Table is not found! [ 0.962842] GHES: HEST is not enabled! [ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.084566] Non-volatile memory driver v1.3 [ 1.084937] Linux agpgart interface v0.103 [ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.089240] ahci 0000:00:1f.2: version 3.0 [ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.2[B] _PRT entry [ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.090657] ahci: SSS flag set, parallel bus scan disabled [ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.106635] scsi0 : ahci [ 1.106935] scsi1 : ahci [ 1.107220] scsi2 : ahci [ 1.107497] scsi3 : ahci [ 1.107773] scsi4 : ahci [ 1.108048] scsi5 : ahci [ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 43 [ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 43 [ 1.109687] ata3: DUMMY [ 1.109906] ata4: DUMMY [ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 43 [ 1.110785] ata6: DUMMY [ 1.111067] Fixed MDIO Bus: probed [ 1.111378] arcnet loaded. [ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1a.0[A] _PRT entry [ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.240042] usb usb1: Product: EHCI Host Controller [ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.306584] hub 1-0:1.0: USB hub found [ 1.328442] hub 1-0:1.0: 2 ports detected [ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1d.0[A] _PRT entry [ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23 Mode:1 Active:1 Dest:1) [ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473720] usb usb2: Product: EHCI Host Controller [ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.473841] hub 2-0:1.0: USB hub found [ 1.473845] hub 2-0:1.0: 2 ports detected [ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver [ 1.753069] Initializing USB Mass Storage driver... [ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz. [ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB, AXM08D1Q, max UDMA/133 [ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.757928] ata1.00: configured for UDMA/133 [ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 AXM0 PQ: 0 ANSI: 5 [ 1.912674] usbcore: registered new interface driver usb-storage [ 1.912675] USB Mass Storage support registered. [ 1.912682] usbcore: registered new interface driver ums-alauda [ 1.912688] usbcore: registered new interface driver ums-cypress [ 1.912694] usbcore: registered new interface driver ums-datafab [ 1.912701] usbcore: registered new interface driver ums-freecom [ 1.912707] usbcore: registered new interface driver ums-isd200 [ 1.912713] usbcore: registered new interface driver ums-jumpshot [ 1.912718] usbcore: registered new interface driver ums-karma [ 1.912724] usbcore: registered new interface driver ums-onetouch [ 1.912730] usbcore: registered new interface driver ums-sddr09 [ 1.912736] usbcore: registered new interface driver ums-sddr55 [ 1.912741] usbcore: registered new interface driver ums-usbat [ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.912807] i8042: [0] 20 -> i8042 (command) [ 1.913286] i8042: [0] 67 <- i8042 (return) [ 1.913347] i8042: [1] 20 -> i8042 (command) [ 1.913721] i8042: [1] 67 <- i8042 (return) [ 1.913726] i8042: [1] 60 -> i8042 (command) [ 1.913889] i8042: [1] 76 -> i8042 (parameter) [ 1.914109] i8042: [1] d3 -> i8042 (command) [ 1.914325] i8042: [1] 5a -> i8042 (parameter) [ 1.914544] i8042: [1] 5a <- i8042 (return) [ 1.914553] i8042: [2] a7 -> i8042 (command) [ 1.914661] i8042: [2] 20 -> i8042 (command) [ 1.914931] i8042: [2] 76 <- i8042 (return) [ 1.914935] i8042: [2] a8 -> i8042 (command) [ 1.915095] i8042: [2] 20 -> i8042 (command) [ 1.915364] i8042: [2] 56 <- i8042 (return) [ 1.915373] i8042: [3] 60 -> i8042 (command) [ 1.915536] i8042: [3] 74 -> i8042 (parameter) [ 1.915763] i8042: [3] d3 -> i8042 (command) [ 1.915978] i8042: [3] f0 -> i8042 (parameter) [ 1.916198] i8042: [3] f0 <- i8042 (return) [ 1.916222] i8042: [4] d3 -> i8042 (command) [ 1.916282] i8042: [4] 56 -> i8042 (parameter) [ 1.916555] i8042: [4] 56 <- i8042 (return) [ 1.916567] i8042: [4] d3 -> i8042 (command) [ 1.916783] i8042: [4] a4 -> i8042 (parameter) [ 1.917002] i8042: [4] a4 <- i8042 (return) [ 1.917027] i8042: [5] 60 -> i8042 (command) [ 1.917137] i8042: [5] 56 -> i8042 (parameter) [ 1.917309] i8042: [5] 60 -> i8042 (command) [ 1.917525] i8042: [5] 47 -> i8042 (parameter) [ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.917632] mousedev: PS/2 mouse device common for all mice [ 1.917760] i8042: [5] f2 -> i8042 (kbd-data) [ 1.917804] rtc_cmos 00:05: RTC can wake from S4 [ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.918037] cpuidle: using governor ladder [ 2.402856] i8042: [491] ed -> i8042 (kbd-data) [ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12) [ 2.402926] hpet1: lost 30 rtc interrupts [ 2.403065] cpuidle: using governor menu [ 2.403067] EFI Variables Facility v0.08 2004-May-17 [ 2.403295] usbcore: registered new interface driver usbhid [ 2.403297] usbhid: USB HID core driver [ 2.404035] i8042: [492] 00 -> i8042 (kbd-data) [ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1) [ 2.510940] i8042: [599] ed -> i8042 (kbd-data) [ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.511126] TCP cubic registered [ 2.511128] IPv6: Loaded, but administratively disabled, reboot required to enable [ 2.511144] lib80211: common routines for IEEE802.11 drivers [ 2.511145] lib80211_crypt: registered algorithm 'NULL' [ 2.511147] Registering the dns_resolver key type [ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 2.511169] [ 2.511169] printing PIC contents [ 2.511173] ... PIC IMR: ffff [ 2.511177] ... PIC IRR: 0c01 [ 2.511184] ... PIC ISR: 0000 [ 2.511187] ... PIC ELCR: 0e00 [ 2.643783] printing local APIC contents on CPU#0/0: [ 2.643784] ... APIC ID: 00000000 (0) [ 2.666176] ... APIC VERSION: 01060015 [ 2.688175] ... APIC TASKPRI: 00000000 (00) [ 2.688176] ... APIC PROCPRI: 00000000 [ 2.688177] ... APIC LDR: 00000001 [ 2.688178] ... APIC SPIV: 000001ff [ 2.688179] ... APIC ISR field: [ 2.688180] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.709866] i8042: [799] f4 -> i8042 (kbd-data) [ 2.710552] ... APIC TMR field: [ 2.710553] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.732661] ... APIC IRR field: [ 2.732662] 0000000002020000000200000000000000000000000000000000000000008000 [ 2.754421] ... APIC ESR: 00000000 [ 2.754422] ... APIC ICR: 000008fd [ 2.754422] ... APIC ICR2: 00000040 [ 2.754423] ... APIC LVTT: 000000ef [ 2.754424] ... APIC LVTPC: 00000400 [ 2.754425] ... APIC LVT0: 00010700 [ 2.754426] ... APIC LVT1: 00000400 [ 2.754427] ... APIC LVTERR: 000000fe [ 2.754428] ... APIC TMICT: 000004c0 [ 2.754428] ... APIC TMCCT: 00000000 [ 2.754429] ... APIC TDCR: 00000003 [ 2.754430] [ 2.775580] number of MP IRQ sources: 15. [ 2.775582] number of IO-APIC #2 registers: 24. [ 2.775583] testing the IO APIC....................... [ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1) [ 2.775695] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.775800] sd 0:0:0:0: [sda] Write Protect is off [ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133 [ 2.825187] ata2.00: configured for UDMA/133 [ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5 [ 2.995778] [ 2.995813] i8042: [1085] d4 -> i8042 (command) [ 2.995924] i8042: [1085] f2 -> i8042 (parameter) [ 2.995926] hub 1-1:1.0: USB hub found [ 2.996023] hub 1-1:1.0: 6 ports detected [ 2.997464] sda: sda1 sda2 [ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12) [ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12) [ 2.999939] i8042: [1089] 60 -> i8042 (command) [ 3.000102] i8042: [1089] 45 -> i8042 (parameter) [ 3.000317] i8042: [1089] 60 -> i8042 (command) [ 3.000531] i8042: [1089] 47 -> i8042 (parameter) [ 3.000767] i8042: [1089] d4 -> i8042 (command) [ 3.000930] i8042: [1089] f2 -> i8042 (parameter) [ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12) [ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12) [ 3.005871] i8042: [1095] d4 -> i8042 (command) [ 3.006034] i8042: [1095] f6 -> i8042 (parameter) [ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12) [ 3.009391] i8042: [1099] d4 -> i8042 (command) [ 3.009609] i8042: [1099] f3 -> i8042 (parameter) [ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12) [ 3.012042] i8042: [1101] d4 -> i8042 (command) [ 3.012206] i8042: [1101] 0a -> i8042 (parameter) [ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12) [ 3.015508] i8042: [1105] d4 -> i8042 (command) [ 3.015725] i8042: [1105] e8 -> i8042 (parameter) [ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12) [ 3.018029] i8042: [1107] d4 -> i8042 (command) [ 3.018192] i8042: [1107] 00 -> i8042 (parameter) [ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12) [ 3.020643] i8042: [1110] d4 -> i8042 (command) [ 3.020807] i8042: [1110] f3 -> i8042 (parameter) [ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12) [ 3.023302] i8042: [1112] d4 -> i8042 (command) [ 3.023465] i8042: [1112] 14 -> i8042 (parameter) [ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12) [ 3.026083] i8042: [1115] d4 -> i8042 (command) [ 3.026247] i8042: [1115] f3 -> i8042 (parameter) [ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12) [ 3.029440] i8042: [1119] d4 -> i8042 (command) [ 3.029708] i8042: [1119] 3c -> i8042 (parameter) [ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12) [ 3.031981] i8042: [1121] d4 -> i8042 (command) [ 3.032144] i8042: [1121] f3 -> i8042 (parameter) [ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12) [ 3.034987] i8042: [1124] d4 -> i8042 (command) [ 3.035149] i8042: [1124] 28 -> i8042 (parameter) [ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12) [ 3.037436] i8042: [1127] d4 -> i8042 (command) [ 3.037600] i8042: [1127] f3 -> i8042 (parameter) [ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12) [ 3.040490] i8042: [1130] d4 -> i8042 (command) [ 3.040757] i8042: [1130] 14 -> i8042 (parameter) [ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12) [ 3.043034] i8042: [1132] d4 -> i8042 (command) [ 3.043198] i8042: [1132] f3 -> i8042 (parameter) [ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12) [ 3.046243] i8042: [1135] d4 -> i8042 (command) [ 3.046408] i8042: [1135] 14 -> i8042 (parameter) [ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12) [ 3.048718] i8042: [1138] d4 -> i8042 (command) [ 3.048882] i8042: [1138] f3 -> i8042 (parameter) [ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12) [ 3.051926] i8042: [1141] d4 -> i8042 (command) [ 3.052194] i8042: [1141] 3c -> i8042 (parameter) [ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12) [ 3.054467] i8042: [1144] d4 -> i8042 (command) [ 3.054630] i8042: [1144] f3 -> i8042 (parameter) [ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12) [ 3.060853] i8042: [1150] d4 -> i8042 (command) [ 3.061069] i8042: [1150] 28 -> i8042 (parameter) [ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12) [ 3.063316] i8042: [1153] d4 -> i8042 (command) [ 3.063479] i8042: [1153] f3 -> i8042 (parameter) [ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12) [ 3.066166] i8042: [1155] d4 -> i8042 (command) [ 3.066329] i8042: [1155] 14 -> i8042 (parameter) [ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12) [ 3.068608] i8042: [1158] d4 -> i8042 (command) [ 3.068772] i8042: [1158] f3 -> i8042 (parameter) [ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12) [ 3.071780] i8042: [1161] d4 -> i8042 (command) [ 3.071943] i8042: [1161] 14 -> i8042 (parameter) [ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12) [ 3.074285] i8042: [1164] d4 -> i8042 (command) [ 3.074448] i8042: [1164] f2 -> i8042 (parameter) [ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12) [ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12) [ 3.077922] i8042: [1167] d4 -> i8042 (command) [ 3.078085] i8042: [1167] e8 -> i8042 (parameter) [ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12) [ 3.080830] i8042: [1170] d4 -> i8042 (command) [ 3.081046] i8042: [1170] 00 -> i8042 (parameter) [ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12) [ 3.083288] i8042: [1173] d4 -> i8042 (command) [ 3.083555] i8042: [1173] e8 -> i8042 (parameter) [ 3.085294] IO APIC #2...... [ 3.085295] .... register #00: 02000000 [ 3.085296] ....... : physical APIC id: 02 [ 3.085297] ....... : Delivery Type: 0 [ 3.085298] ....... : LTS : 0 [ 3.085299] .... register #01: 00170020 [ 3.085300] ....... : max redirection entries: 17 [ 3.085301] ....... : PRQ implemented: 0 [ 3.085302] ....... : IO APIC version: 20 [ 3.085302] .... IRQ redirection table: [ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: [ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00 [ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01 [ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02 [ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03 [ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04 [ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05 [ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06 [ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07 [ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08 [ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09 [ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A [ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B [ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C [ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D [ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E [ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F [ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10 [ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11 [ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00 [ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13 [ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14 [ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00 [ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00 [ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17 [ 3.085428] IRQ to pin mappings: [ 3.085429] IRQ0 -> 0:2 [ 3.085431] IRQ1 -> 0:1 [ 3.085432] IRQ3 -> 0:3 [ 3.085433] IRQ4 -> 0:4 [ 3.085435] IRQ5 -> 0:5 [ 3.085436] IRQ6 -> 0:6 [ 3.085437] IRQ7 -> 0:7 [ 3.085438] IRQ8 -> 0:8 [ 3.085440] IRQ9 -> 0:9 [ 3.085441] IRQ10 -> 0:10 [ 3.085443] IRQ11 -> 0:11 [ 3.085444] IRQ12 -> 0:12 [ 3.085445] IRQ13 -> 0:13 [ 3.085446] IRQ14 -> 0:14 [ 3.085448] IRQ15 -> 0:15 [ 3.085449] IRQ16 -> 0:16 [ 3.085450] IRQ17 -> 0:17 [ 3.085451] IRQ19 -> 0:19 [ 3.085453] IRQ20 -> 0:20 [ 3.085454] IRQ23 -> 0:23 [ 3.085455] .................................... done. [ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12) [ 3.086492] i8042: [1176] d4 -> i8042 (command) [ 3.086656] i8042: [1176] 00 -> i8042 (parameter) [ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12) [ 3.089102] i8042: [1178] d4 -> i8042 (command) [ 3.089370] i8042: [1178] e8 -> i8042 (parameter) [ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12) [ 3.092012] i8042: [1181] d4 -> i8042 (command) [ 3.092227] i8042: [1181] 00 -> i8042 (parameter) [ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12) [ 3.094483] i8042: [1184] d4 -> i8042 (command) [ 3.094648] i8042: [1184] e8 -> i8042 (parameter) [ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12) [ 3.097161] i8042: [1186] d4 -> i8042 (command) [ 3.097427] i8042: [1186] 00 -> i8042 (parameter) [ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12) [ 3.099675] i8042: [1189] d4 -> i8042 (command) [ 3.099838] i8042: [1189] e9 -> i8042 (parameter) [ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12) [ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12) [ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12) [ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12) [ 3.105799] i8042: [1195] d4 -> i8042 (command) [ 3.106067] i8042: [1195] f6 -> i8042 (parameter) [ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12) [ 3.108600] i8042: [1198] d4 -> i8042 (command) [ 3.108762] i8042: [1198] e8 -> i8042 (parameter) [ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12) [ 3.111677] i8042: [1201] d4 -> i8042 (command) [ 3.111945] i8042: [1201] 00 -> i8042 (parameter) [ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12) [ 3.114254] i8042: [1204] d4 -> i8042 (command) [ 3.114522] i8042: [1204] e6 -> i8042 (parameter) [ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12) [ 3.117214] i8042: [1207] d4 -> i8042 (command) [ 3.117378] i8042: [1207] e6 -> i8042 (parameter) [ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12) [ 3.119715] i8042: [1209] d4 -> i8042 (command) [ 3.119880] i8042: [1209] e6 -> i8042 (parameter) [ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12) [ 3.123105] i8042: [1212] d4 -> i8042 (command) [ 3.123320] i8042: [1212] e9 -> i8042 (parameter) [ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12) [ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12) [ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12) [ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12) [ 3.128731] i8042: [1218] d4 -> i8042 (command) [ 3.128894] i8042: [1218] f6 -> i8042 (parameter) [ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12) [ 3.132101] i8042: [1221] d4 -> i8042 (command) [ 3.132265] i8042: [1221] f5 -> i8042 (parameter) [ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12) [ 3.134786] i8042: [1224] d4 -> i8042 (command) [ 3.134949] i8042: [1224] e6 -> i8042 (parameter) [ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12) [ 3.137773] i8042: [1227] d4 -> i8042 (command) [ 3.137935] i8042: [1227] e6 -> i8042 (parameter) [ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12) [ 3.140385] i8042: [1230] d4 -> i8042 (command) [ 3.140654] i8042: [1230] e6 -> i8042 (parameter) [ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12) [ 3.143076] i8042: [1232] d4 -> i8042 (command) [ 3.143291] i8042: [1232] e9 -> i8042 (parameter) [ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12) [ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12) [ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12) [ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12) [ 3.148796] i8042: [1238] d4 -> i8042 (command) [ 3.148959] i8042: [1238] e8 -> i8042 (parameter) [ 3.151988] PM: Checking hibernation image partition /dev/system/swap [ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12) [ 3.152134] i8042: [1241] d4 -> i8042 (command) [ 3.152298] i8042: [1242] 03 -> i8042 (parameter) [ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12) [ 3.154707] i8042: [1244] d4 -> i8042 (command) [ 3.154818] i8042: [1244] e6 -> i8042 (parameter) [ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12) [ 3.157971] i8042: [1247] d4 -> i8042 (command) [ 3.158134] i8042: [1247] e6 -> i8042 (parameter) [ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12) [ 3.160558] i8042: [1250] d4 -> i8042 (command) [ 3.160669] i8042: [1250] e6 -> i8042 (parameter) [ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12) [ 3.163788] i8042: [1253] d4 -> i8042 (command) [ 3.163900] i8042: [1253] e9 -> i8042 (parameter) [ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12) [ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12) [ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12) [ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12) [ 3.169856] i8042: [1259] d4 -> i8042 (command) [ 3.169966] i8042: [1259] e8 -> i8042 (parameter) [ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12) [ 3.173421] i8042: [1263] d4 -> i8042 (command) [ 3.173639] i8042: [1263] 00 -> i8042 (parameter) [ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12) [ 3.176044] i8042: [1265] d4 -> i8042 (command) [ 3.176209] i8042: [1265] e6 -> i8042 (parameter) [ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12) [ 3.178820] i8042: [1268] d4 -> i8042 (command) [ 3.178931] i8042: [1268] e6 -> i8042 (parameter) [ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12) [ 3.181499] i8042: [1271] d4 -> i8042 (command) [ 3.182240] i8042: [1271] e6 -> i8042 (parameter) [ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12) [ 3.184842] i8042: [1274] d4 -> i8042 (command) [ 3.184954] i8042: [1274] e9 -> i8042 (parameter) [ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12) [ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12) [ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12) [ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12) [ 3.190841] i8042: [1280] d4 -> i8042 (command) [ 3.190953] i8042: [1280] e1 -> i8042 (parameter) [ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.259900] hub 2-1:1.0: USB hub found [ 3.281547] hub 2-1:1.0: 8 ports detected [ 3.299961] ata5: SATA link down (SStatus 0 SControl 300) [ 3.389927] i8042: [1480] d4 -> i8042 (command) [ 3.390091] i8042: [1480] 0a -> i8042 (parameter) [ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=642a [ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.589561] i8042: [1680] d4 -> i8042 (command) [ 3.589671] i8042: [1680] f5 -> i8042 (parameter) [ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12) [ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM [ 3.604613] i8042: [1695] d4 -> i8042 (command) [ 3.604725] i8042: [1695] f3 -> i8042 (parameter) [ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12) [ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00 [ 3.626320] i8042: [1716] d4 -> i8042 (command) [ 3.626484] i8042: [1716] 66 -> i8042 (parameter) [ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12) [ 3.648259] i8042: [1738] d4 -> i8042 (command) [ 3.648424] i8042: [1738] 88 -> i8042 (parameter) [ 3.678465] i8042: [1769] d4 -> i8042 (command) [ 3.678643] i8042: [1769] f3 -> i8042 (parameter) [ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12) [ 3.681225] i8042: [1771] d4 -> i8042 (command) [ 3.681336] i8042: [1771] f4 -> i8042 (parameter) [ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12) [ 3.684574] i8042: [1775] d4 -> i8042 (command) [ 3.684791] i8042: [1775] f6 -> i8042 (parameter) [ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12) [ 3.688507] i8042: [1779] d4 -> i8042 (command) [ 3.689512] i8042: [1779] ff -> i8042 (parameter) [ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12) [ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd [ 3.838521] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12) [ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12) [ 3.893215] i8042: [1984] d4 -> i8042 (command) [ 3.893483] i8042: [1984] f3 -> i8042 (parameter) [ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12) [ 3.896676] i8042: [1987] d4 -> i8042 (command) [ 3.896787] i8042: [1987] c8 -> i8042 (parameter) [ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12) [ 3.899238] i8042: [1990] d4 -> i8042 (command) [ 3.899454] i8042: [1990] f3 -> i8042 (parameter) [ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12) [ 3.902664] i8042: [1993] d4 -> i8042 (command) [ 3.902775] i8042: [1993] 64 -> i8042 (parameter) [ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12) [ 3.905283] i8042: [1996] d4 -> i8042 (command) [ 3.905973] i8042: [1996] f3 -> i8042 (parameter) [ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12) [ 3.908653] i8042: [1999] d4 -> i8042 (command) [ 3.908765] i8042: [1999] 50 -> i8042 (parameter) [ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12) [ 3.911743] i8042: [2002] d4 -> i8042 (command) [ 3.911855] i8042: [2002] f2 -> i8042 (parameter) [ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12) [ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12) [ 3.915406] i8042: [2006] d4 -> i8042 (command) [ 3.916096] i8042: [2006] f3 -> i8042 (parameter) [ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12) [ 3.918752] i8042: [2009] d4 -> i8042 (command) [ 3.918864] i8042: [2009] c8 -> i8042 (parameter) [ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12) [ 3.921958] i8042: [2012] d4 -> i8042 (command) [ 3.922122] i8042: [2012] f3 -> i8042 (parameter) [ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12) [ 3.924738] i8042: [2015] d4 -> i8042 (command) [ 3.924850] i8042: [2015] c8 -> i8042 (parameter) [ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12) [ 3.927502] i8042: [2018] d4 -> i8042 (command) [ 3.927667] i8042: [2018] f3 -> i8042 (parameter) [ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12) [ 3.930313] i8042: [2021] d4 -> i8042 (command) [ 3.931428] i8042: [2021] 50 -> i8042 (parameter) [ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12) [ 3.933824] i8042: [2024] d4 -> i8042 (command) [ 3.933936] i8042: [2024] f2 -> i8042 (parameter) [ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12) [ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12) [ 3.937931] i8042: [2028] d4 -> i8042 (command) [ 3.938042] i8042: [2028] f3 -> i8042 (parameter) [ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12) [ 3.941554] i8042: [2032] d4 -> i8042 (command) [ 3.941770] i8042: [2032] c8 -> i8042 (parameter) [ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12) [ 3.944219] i8042: [2035] d4 -> i8042 (command) [ 3.944330] i8042: [2035] f3 -> i8042 (parameter) [ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12) [ 3.947324] i8042: [2038] d4 -> i8042 (command) [ 3.947488] i8042: [2038] 64 -> i8042 (parameter) [ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12) [ 3.949903] i8042: [2040] d4 -> i8042 (command) [ 3.950015] i8042: [2040] f3 -> i8042 (parameter) [ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12) [ 3.952941] i8042: [2043] d4 -> i8042 (command) [ 3.953053] i8042: [2043] 50 -> i8042 (parameter) [ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12) [ 3.955589] i8042: [2046] d4 -> i8042 (command) [ 3.955753] i8042: [2046] f2 -> i8042 (parameter) [ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12) [ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12) [ 3.959980] i8042: [2051] d4 -> i8042 (command) [ 3.960092] i8042: [2051] f3 -> i8042 (parameter) [ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12) [ 3.963213] i8042: [2054] d4 -> i8042 (command) [ 3.963378] i8042: [2054] 64 -> i8042 (parameter) [ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12) [ 3.965945] i8042: [2056] d4 -> i8042 (command) [ 3.966056] i8042: [2056] e8 -> i8042 (parameter) [ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12) [ 3.968794] i8042: [2059] d4 -> i8042 (command) [ 3.968959] i8042: [2059] 03 -> i8042 (parameter) [ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12) [ 3.971398] i8042: [2062] d4 -> i8042 (command) [ 3.974350] i8042: [2062] e6 -> i8042 (parameter) [ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12) [ 3.977018] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 4.000810] i8042: [2091] d4 -> i8042 (command) [ 4.000921] i8042: [2091] f4 -> i8042 (parameter) [ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12) [ 4.003598] PM: Hibernation image not present or could not be loaded. [ 4.003620] registered taskstats version 1 [ 4.035412] Magic number: 7:990:357 [ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27 01:23:24 UTC (1324949004) [ 4.085662] Freeing unused kernel memory: 944k freed [ 4.110469] Write protecting the kernel read-only data: 12288k [ 4.135741] Freeing unused kernel memory: 192k freed [ 4.164739] Freeing unused kernel memory: 1944k freed [ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.266531] shpchp: shpcd_init: pci_register_driver = 0 [ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.322294] udevd[131]: starting version 173 [ 4.356829] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 4.393554] ACPI: Power Button [PWRB] [ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.393743] ACPI: Thermal Zone [TZ00] (54 C) [ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.393981] ACPI: Thermal Zone [TZ01] (54 C) [ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found 0000:04:00.0[A] _PRT entry [ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 4.523002] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.523047] usb usb3: Product: xHCI Host Controller [ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.523050] usb usb3: SerialNumber: 0000:04:00.0 [ 4.523265] xHCI xhci_add_endpoint called for root hub [ 4.523267] xHCI xhci_check_bandwidth called for root hub [ 4.523328] hub 3-0:1.0: USB hub found [ 4.523339] hub 3-0:1.0: 2 ports detected [ 4.523379] ACPI: Sleep Button [SLPB] [ 4.523426] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 4.524286] ACPI: Lid Switch [LID0] [ 4.524340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.524373] ACPI: Power Button [PWRF] [ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.526220] usb usb4: Product: xHCI Host Controller [ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.526223] usb usb4: SerialNumber: 0000:04:00.0 [ 4.526375] xHCI xhci_add_endpoint called for root hub [ 4.526377] xHCI xhci_check_bandwidth called for root hub [ 4.526439] hub 4-0:1.0: USB hub found [ 4.526448] hub 4-0:1.0: 2 ports detected [ 4.526942] [drm] Initialized drm 1.1.0 20060810 [ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:02.0[A] _PRT entry [ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.531292] i915 0000:00:02.0: setting latency timer to 64 [ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.368667] [drm] Driver supports precise vblank timestamp query. [ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378837] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027 [ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.647346] usb 3-1: Product: USB Multimedia Keyboard [ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp. [ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6 [ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input0 [ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7 [ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input1 [ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608 [ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.895947] usb 3-2: Product: USB2.0 Hub [ 5.901665] hub 3-2:1.0: USB hub found [ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.911512] hub 3-2:1.0: 4 ports detected [ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000) [ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 5.950427] Console: switching to colour dummy device 80x25 [ 5.951515] fbcon: inteldrmfb (fb0) is primary device [ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd [ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0608 [ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.201327] usb 3-2.4: Product: USB2.0 Hub [ 6.202290] hub 3-2.4:1.0: USB hub found [ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.202925] hub 3-2.4:1.0: 4 ports detected [ 6.313235] Console: switching to colour frame buffer device 236x63 [ 6.334979] fb0: inteldrmfb frame buffer device [ 6.335054] drm: registered panic notifier [ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 6.338677] acpi device:2e: registered as cooling_device4 [ 6.338816] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8 [ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 6.343258] acpi device:32: registered as cooling_device5 [ 6.343536] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.402163] Btrfs loaded [ 6.443076] md: linear personality registered for level -1 [ 6.478910] device-mapper: uevent: version 1.0.3 [ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd [ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d, idProduct=c063 [ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse [ 6.519906] usb 3-2.4.4: Manufacturer: DELL [ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.536487] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10 [ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0 [ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000 [ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000 [ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000 [ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000 [ 39.517655] PM: Basic memory bitmaps created [ 39.540690] PM: Basic memory bitmaps freed [ 39.540694] video LNXVIDEO:00: Restoring backlight state [ 39.540695] video LNXVIDEO:01: Restoring backlight state [ 39.590164] PM: Starting manual resume from disk [ 39.595666] PM: Hibernation image partition 253:3 present [ 39.595669] PM: Looking for hibernation image. [ 39.597171] PM: Image not found (code -22) [ 39.597173] PM: Hibernation image not present or could not be loaded. [ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1 transid 21081 /dev/mapper/system-root [ 39.616353] btrfs: turning off barriers [ 39.616356] btrfs: enabling auto defrag [ 39.616357] btrfs: use lzo compression [ 39.616358] btrfs: disk space caching is enabled [ 39.661102] Btrfs detected SSD devices, enabling SSD mode [ 40.401467] btrfs: turning off barriers [ 40.407291] btrfs: enabling auto defrag [ 40.407352] btrfs: use lzo compression [ 40.418719] btrfs: disk space caching is enabled [ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>. [ 41.272117] udevd[606]: starting version 173 [ 41.435290] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:16.0[A] _PRT entry [ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.435834] mei 0000:00:16.0: setting latency timer to 64 [ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X [ 41.473031] iTCO_vendor_support: vendor-support=0 [ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found 0000:06:00.0[A] _PRT entry [ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64 [ 41.487779] mtp-probe[752]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1" [ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.3[C] _PRT entry [ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1 Dest:1) [ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device [ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 41.528598] mtp-probe[776]: checking bus 3, device 5: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4" [ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device [ 41.538647] btrfs: turning off barriers [ 41.538650] btrfs: enabling auto defrag [ 41.538653] btrfs: use lzo compression [ 41.538653] btrfs: disk space caching is enabled [ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.568681] mtp-probe[794]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4" [ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device [ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 41.597648] Bluetooth: Core ver 2.16 [ 41.603983] NET: Registered protocol family 31 [ 41.608008] ACPI: AC Adapter [ADP0] (on-line) [ 41.614610] Bluetooth: HCI device and connection manager initialized [ 41.614613] Bluetooth: HCI socket layer initialized [ 41.614615] Bluetooth: L2CAP socket layer initialized [ 41.614622] Bluetooth: SCO socket layer initialized [ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 41.654637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.681836] ACPI: Battery Slot [BAT0] (battery present) [ 41.687239] wmi: Mapper loaded [ 41.693494] Linux video capture interface: v2.00 [ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 41.702161] usbcore: registered new interface driver btusb [ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 41.742658] cfg80211: Calling CRDA to update world regulatory domain [ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 41.766095] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0c45:642a) [ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 41.778771] Copyright(c) 2003-2011 Intel Corporation [ 41.778833] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12 [ 41.778960] usbcore: registered new interface driver uvcvideo [ 41.778962] USB Video Class driver (1.1.1) [ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1b.0[A] _PRT entry [ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found 0000:03:00.0[A] _PRT entry [ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64 [ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000 [ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X [ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0 [ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 41.829386] ifup[893]: Service network not started and mode 'auto' -> skipping [ 41.852847] cfg80211: World regulatory domain updated: [ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22 Mode:1 Active:1 Dest:1) [ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13 [ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1 build 33993 [ 41.940849] Registered led device: phy0-led [ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 42.010557] ifup[964]: Service network not started and mode 'auto' -> skipping [ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap. Priority:0 extents:1 across:2097148k SS [ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d [ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1 [ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1 [ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007 [ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a [ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5 [ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1 [ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0 [ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1 [ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0 [ 45.437901] ALSA hda_codec.c:4964 inputs: [ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12 [ 45.437904] ALSA hda_codec.c:4968 Mic=0x18 [ 45.437905] ALSA hda_codec.c:4970 [ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d [ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269 [ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 45.453689] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 45.458609] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active. [ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros, 137097/159744 bloques [ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1 transid 22126 /dev/mapper/system-home [ 45.829949] btrfs: turning off barriers [ 45.834896] btrfs: enabling auto defrag [ 45.834957] btrfs: use lzo compression [ 45.840735] EXT4-fs (sda1): barriers disabled [ 45.849518] btrfs: disk space caching is enabled [ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: acl,barrier=0,data=writeback,user_xattr [ 45.869431] Btrfs detected SSD devices, enabling SSD mode [ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.174581] Bluetooth: BNEP filters: protocol multicast [ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.337233] Bluetooth: RFCOMM TTY layer initialized [ 47.337238] Bluetooth: RFCOMM socket layer initialized [ 47.337239] Bluetooth: RFCOMM ver 1.11 [ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X [ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 47.648775] NET: Registered protocol family 17 [ 48.961311] EXT4-fs (sda1): re-mounted. Opts: acl,barrier=0,data=writeback,user_xattr,commit=0 [ 96.852567] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 96.855107] wlan0: authenticated [ 96.896863] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 96.903865] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 96.903869] wlan0: associated [ 106.895705] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 106.909897] cfg80211: Calling CRDA to update world regulatory domain [ 106.912356] cfg80211: World regulatory domain updated: [ 106.912359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 106.912361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.912363] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.912365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.912366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.912367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 110.146828] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 110.149314] wlan0: authenticated [ 110.154157] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 110.159155] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 110.159157] wlan0: associated [ 120.042706] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 120.054236] cfg80211: Calling CRDA to update world regulatory domain [ 120.056757] cfg80211: World regulatory domain updated: [ 120.056761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 120.056763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.056764] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 120.056766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 120.056767] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.056769] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 138.190818] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 138.193402] wlan0: authenticated [ 138.196754] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 138.201826] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 138.201840] wlan0: associated [ 148.192646] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 148.206339] cfg80211: Calling CRDA to update world regulatory domain [ 148.208741] cfg80211: World regulatory domain updated: [ 148.208744] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 148.208746] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 148.208748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 148.208749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 148.208751] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 148.208752] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 151.443088] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 151.445498] wlan0: authenticated [ 151.446657] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 151.451688] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 151.451691] wlan0: associated [ 159.980012] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 159.992768] cfg80211: Calling CRDA to update world regulatory domain [ 159.995101] cfg80211: World regulatory domain updated: [ 159.995104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 159.995106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.995108] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 159.995109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 159.995111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.995112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 172.519660] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 172.522038] wlan0: authenticated [ 172.525229] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 172.530226] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 172.530229] wlan0: associated [ 182.521101] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 182.535253] cfg80211: Calling CRDA to update world regulatory domain [ 182.537720] cfg80211: World regulatory domain updated: [ 182.537723] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 182.537725] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 182.537727] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 182.537728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 182.537730] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 182.537731] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 185.803811] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 185.806245] wlan0: authenticated [ 185.807952] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 185.814223] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 185.814226] wlan0: associated [ 194.926199] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 194.939848] cfg80211: Calling CRDA to update world regulatory domain [ 194.942320] cfg80211: World regulatory domain updated: [ 194.942323] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 194.942325] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 194.942326] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 194.942328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 194.942329] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 194.942331] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 200.611067] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 200.617743] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 200.746343] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X [ 200.746502] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 215.864303] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 215.867879] wlan0: authenticated [ 215.871819] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 215.878327] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 215.878330] wlan0: associated [ 225.870530] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 225.885706] cfg80211: Calling CRDA to update world regulatory domain [ 225.888475] cfg80211: World regulatory domain updated: [ 225.888479] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 225.888481] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 225.888483] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 225.888484] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 225.888486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 225.888487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 229.142454] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 229.145043] wlan0: authenticated [ 229.146399] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 229.151507] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 229.151510] wlan0: associated [ 237.860170] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 237.878971] cfg80211: Calling CRDA to update world regulatory domain [ 237.881425] cfg80211: World regulatory domain updated: [ 237.881428] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 237.881430] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 237.881431] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 237.881433] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 237.881434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 237.881436] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 253.367126] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 253.371335] wlan0: authenticated [ 253.372468] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 253.377431] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 253.377434] wlan0: associated [ 263.368490] wlan0: disassociating from 06:1c:f0:60:61:11 by local choice (reason=3) [ 263.381771] cfg80211: Calling CRDA to update world regulatory domain [ 263.384197] cfg80211: World regulatory domain updated: [ 263.384200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 263.384202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 263.384203] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 263.384205] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 263.384206] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 263.384208] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 266.659599] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1) [ 266.662253] wlan0: authenticated [ 266.665307] wlan0: associate with 06:1c:f0:60:61:11 (try 1) [ 266.670391] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431 status=0 aid=1) [ 266.670394] wlan0: associated root@xps15z:/home/crrodriguez # ls abuild .cache .emacs .gconf home:elvigia:nfs-systemd .kchmviewer .mozilla .profile .qmmp .skel .vim .xim.template .zsh-update .adobe .config esc.php .gitconfig .htoprc .kde4 Música public_html .quiltrc .ssh .viminfo .xinitrc.template .aqemu .dbus Escritorio .gnome2 Imágenes .kderc .oh-my-zsh Público .rcc .subversion .vim_local .xsession-errors attachments Descargas .esd_auth .gstreamer-0.10 .inputrc .lastpass .osc_cookiejar .pulse rpmbuild systemd.svg .vimrc yankring_history_v2.txt .bash_history .dmrc .fontconfig .gtkrc-2.0-kde4 isos .lesshst .oscrc .pulse-cookie .rpmmacros .thumbnails vms .zcompdump .bashrc Documentos .fonts .gvfs .java .local .pki pulseverbose.log .scanview.cfg .thunderbird .wine .zsh_history bin dotvim .fonts.conf home:elvigia:branches:network jdk-7u2-linux-x64.rpm .macromedia Plantillas .pyhistory scm Vídeos .Xauthority .zshrc root@xps15z:/home/crrodriguez # ls abuild .cache .emacs .gconf home:elvigia:nfs-systemd .kchmviewer .mozilla .profile .qmmp .skel .vim .xim.template .zsh-update .adobe .config esc.php .gitconfig .htoprc .kde4 Música public_html .quiltrc .ssh .viminfo .xinitrc.template .aqemu .dbus Escritorio .gnome2 Imágenes .kderc .oh-my-zsh Público .rcc .subversion .vim_local .xsession-errors attachments Descargas .esd_auth .gstreamer-0.10 .inputrc .lastpass .osc_cookiejar .pulse rpmbuild systemd.svg .vimrc yankring_history_v2.txt .bash_history .dmrc .fontconfig .gtkrc-2.0-kde4 isos .lesshst .oscrc .pulse-cookie .rpmmacros .thumbnails vms .zcompdump .bashrc Documentos .fonts .gvfs .java .local .pki pulseverbose.log .scanview.cfg .thunderbird .wine .zsh_history bin dotvim .fonts.conf home:elvigia:branches:network jdk-7u2-linux-x64.rpm .macromedia Plantillas .pyhistory scm Vídeos .Xauthority .zshrc root@xps15z:/home/crrodriguez # dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-rc6-3-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Dec 22 15:05:54 UTC 2011 (c4246bf) [ 0.000000] Command line: root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9 resume=/dev/system/swap splash=verbose clocksource=hpet hpet64 ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug i8042.debug vga=0x31b [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable) [ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved) [ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable) [ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved) [ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved) [ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved) [ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved) [ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved) [ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS A08 12/13/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes. [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bac85000-bac8f000 [ 0.000000] RAMDISK: 373d9000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf40000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000-ffff88023e3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000b5a28 [ 0.000000] 0: 0x000b6e29 -> 0x000b886a [ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2069459 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31 [ 0.000000] Normal zone: 17913 pages used for memmap [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5a28000 - 00000000b6e29000 [ 0.000000] PM: Registered nosave memory: 00000000b886a000 - 00000000b8ab3000 [ 0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bad2e000 [ 0.000000] PM: Registered nosave memory: 00000000bad2e000 - 00000000bad3d000 [ 0.000000] PM: Registered nosave memory: 00000000bad3d000 - 00000000badfb000 [ 0.000000] PM: Registered nosave memory: 00000000badfb000 - 00000000badfd000 [ 0.000000] PM: Registered nosave memory: 00000000badfd000 - 00000000badff000 [ 0.000000] PM: Registered nosave memory: 00000000badff000 - 00000000bae02000 [ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae0a000 [ 0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000 [ 0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf18000 [ 0.000000] PM: Registered nosave memory: 00000000baf18000 - 00000000baf1c000 [ 0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000 [ 0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744 r8192 d22656 u262144 [ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037205 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9 resume=/dev/system/swap splash=verbose clocksource=hpet hpet64 ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug i8042.debug vga=0x31b [ 0.000000] bootsplash: verbose mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code, 1157300k absent, 210492k reserved, 7648k data, 944k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet timer0 configured in 64-bit mode [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2793.229 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.45 BogoMIPS (lpj=2793229) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000049] AppArmor: AppArmor initialized [ 0.000647] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002144] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002776] Mount-cache hash table entries: 256 [ 0.002859] Initializing cgroup subsys cpuacct [ 0.002863] Initializing cgroup subsys memory [ 0.002877] Initializing cgroup subsys devices [ 0.002880] Initializing cgroup subsys freezer [ 0.002882] Initializing cgroup subsys net_cls [ 0.002884] Initializing cgroup subsys blkio [ 0.002890] Initializing cgroup subsys perf_event [ 0.002912] Disabled fast string operations [ 0.002915] CPU: Physical Processor ID: 0 [ 0.002917] CPU: Processor Core ID: 0 [ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002922] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002927] mce: CPU supports 7 MCE banks [ 0.002936] CPU0: Thermal monitoring handled by SMI [ 0.002941] using mwait in idle threads. [ 0.003584] ACPI: Core revision 20110623 [ 0.059768] Getting VERSION: 1060015 [ 0.059771] Getting VERSION: 1060015 [ 0.059773] Getting ID: 0 [ 0.059774] Getting ID: 0 [ 0.059783] DMAR: Host address width 36 [ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.059881] HPET id 0 under DRHD base 0xfed91000 [ 0.059884] HPET id 0 under DRHD base 0xfed91000 [ 0.059886] HPET id 0 under DRHD base 0xfed91000 [ 0.059888] HPET id 0 under DRHD base 0xfed91000 [ 0.059890] HPET id 0 under DRHD base 0xfed91000 [ 0.059892] HPET id 0 under DRHD base 0xfed91000 [ 0.059894] HPET id 0 under DRHD base 0xfed91000 [ 0.059896] HPET id 0 under DRHD base 0xfed91000 [ 0.060143] Enabled IRQ remapping in x2apic mode [ 0.060146] Enabling x2apic [ 0.060148] Enabled x2apic [ 0.060153] Switched APIC routing to cluster x2apic. [ 0.060158] enabled ExtINT on CPU#0 [ 0.060404] ESR value before enabling vector: 0x00000080 after: 0x00000000 [ 0.060421] ENABLING IO-APIC IRQs [ 0.060423] init IO_APIC IRQs [ 0.060424] apic 2 pin 0 not connected [ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) [ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) [ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) [ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.060535] apic 2 pin 16 not connected [ 0.060536] apic 2 pin 17 not connected [ 0.060537] apic 2 pin 18 not connected [ 0.060538] apic 2 pin 19 not connected [ 0.060538] apic 2 pin 20 not connected [ 0.060539] apic 2 pin 21 not connected [ 0.060540] apic 2 pin 22 not connected [ 0.060541] apic 2 pin 23 not connected [ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07 [ 0.070671] Using local APIC timer interrupts. [ 0.070671] calibrating APIC timer ... [ 0.172123] ... lapic delta = 623574 [ 0.172125] ... PM-Timer delta = 357949 [ 0.172126] ... PM-Timer result ok [ 0.172128] ..... delta 623574 [ 0.172130] ..... mult: 26786370 [ 0.172132] ..... calibration result: 99771 [ 0.172134] ..... CPU clock speed is 2793.0611 MHz. [ 0.172136] ..... host bus clock speed is 99.0771 MHz. [ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.172150] PEBS disabled due to CPU errata. [ 0.172154] ... version: 3 [ 0.172155] ... bit width: 48 [ 0.172157] ... generic registers: 4 [ 0.172159] ... value mask: 0000ffffffffffff [ 0.172162] ... max period: 000000007fffffff [ 0.172164] ... fixed-purpose events: 3 [ 0.172166] ... event mask: 000000070000000f [ 0.180330] NMI watchdog enabled, takes one hw-pmu counter. [ 0.188150] Booting Node 0, Processors #1 [ 0.188160] smpboot cpu 1: start_ip = 98000 [ 0.199162] masked ExtINT on CPU#1 [ 0.259011] Disabled fast string operations [ 0.259023] CPU1: Thermal monitoring handled by SMI [ 0.279047] NMI watchdog enabled, takes one hw-pmu counter. [ 0.285004] #2 [ 0.285010] smpboot cpu 2: start_ip = 98000 [ 0.296013] masked ExtINT on CPU#2 [ 0.355853] Disabled fast string operations [ 0.355864] CPU2: Thermal monitoring handled by SMI [ 0.375921] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381847] #3 [ 0.381852] smpboot cpu 3: start_ip = 98000 [ 0.392852] masked ExtINT on CPU#3 [ 0.452696] Disabled fast string operations [ 0.452707] CPU3: Thermal monitoring handled by SMI [ 0.472765] NMI watchdog enabled, takes one hw-pmu counter. [ 0.474664] Brought up 4 CPUs [ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS). [ 0.478171] devtmpfs: initialized [ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes) [ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes) [ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes) [ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes) [ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes) [ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes) [ 0.479061] print_constraints: dummy: [ 0.479091] RTC time: 1:23:20, date: 12/27/11 [ 0.479128] NET: Registered protocol family 16 [ 0.479269] ACPI: bus type pci registered [ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.489012] PCI: Using configuration type 1 for base access [ 0.489769] bio: create slab <bio-0> at 0 [ 0.489840] ACPI: Added _OSI(Module Device) [ 0.489843] ACPI: Added _OSI(Processor Device) [ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.489848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.491351] ACPI: EC: Look up EC in DSDT [ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code [ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.500979] ACPI: Dynamic OEM Table Load: [ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.506495] ACPI: Dynamic OEM Table Load: [ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.509171] ACPI: Dynamic OEM Table Load: [ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.514717] ACPI: Interpreter enabled [ 0.514722] ACPI: (supports S0 S3 S4 S5) [ 0.514744] ACPI: Using IOAPIC for interrupt routing [ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.520446] ACPI: No dock devices found. [ 0.520448] HEST: Table not found. [ 0.520451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.520852] \_SB_.PCI0:_OSC invalid UUID [ 0.520853] _OSC request data:1 8 1f [ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.521540] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.521544] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.521548] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.521613] pci 0000:00:01.0: PME# disabled [ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.521778] pci 0000:00:16.0: PME# disabled [ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.521902] pci 0000:00:1a.0: PME# disabled [ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.521994] pci 0000:00:1b.0: PME# disabled [ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.522079] pci 0000:00:1c.0: PME# disabled [ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.522166] pci 0000:00:1c.1: PME# disabled [ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.522253] pci 0000:00:1c.3: PME# disabled [ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.522339] pci 0000:00:1c.4: PME# disabled [ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.522426] pci 0000:00:1c.5: PME# disabled [ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.522548] pci 0000:00:1d.0: PME# disabled [ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot [ 0.522774] pci 0000:00:1f.2: PME# disabled [ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.524626] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 [ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.525652] pci 0000:03:00.0: PME# disabled [ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.527917] pci 0000:04:00.0: PME# disabled [ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200 [ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit] [ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529910] pci 0000:06:00.0: PME# disabled [ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.531763] 0000:00:1f[A] -> [21] [ 0.531766] 0000:00:1f[B] -> [19] [ 0.531769] 0000:00:1f[C] -> [18] [ 0.531771] 0000:00:1f[D] -> [16] [ 0.531773] 0000:00:1d[A] -> [23] [ 0.531776] 0000:00:1a[A] -> [16] [ 0.531778] 0000:00:1b[A] -> [22] [ 0.531781] 0000:00:16[A] -> [16] [ 0.531783] 0000:00:16[B] -> [19] [ 0.531785] 0000:00:16[C] -> [18] [ 0.531788] 0000:00:16[D] -> [17] [ 0.531790] 0000:00:1c[A] -> [16] [ 0.531792] 0000:00:1c[B] -> [17] [ 0.531795] 0000:00:1c[C] -> [18] [ 0.531797] 0000:00:1c[D] -> [19] [ 0.531799] 0000:00:01[A] -> [16] [ 0.531802] 0000:00:01[B] -> [17] [ 0.531804] 0000:00:01[C] -> [18] [ 0.531806] 0000:00:01[D] -> [19] [ 0.531809] 0000:00:02[A] -> [16] [ 0.531811] 0000:00:04[A] -> [16] [ 0.531813] 0000:00:04[B] -> [17] [ 0.531816] 0000:00:04[C] -> [18] [ 0.531818] 0000:00:04[D] -> [19] [ 0.531840] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.0 is a PCI bridge [ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.531874] 0000:02:00[A] -> [16] [ 0.531877] 0000:02:00[B] -> [17] [ 0.531879] 0000:02:00[C] -> [18] [ 0.531882] 0000:02:00[D] -> [19] [ 0.531890] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.1 is a PCI bridge [ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.531923] 0000:03:00[A] -> [17] [ 0.531925] 0000:03:00[B] -> [18] [ 0.531928] 0000:03:00[C] -> [19] [ 0.531930] 0000:03:00[D] -> [16] [ 0.531940] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.3 is a PCI bridge [ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.531972] 0000:04:00[A] -> [19] [ 0.531974] 0000:04:00[B] -> [16] [ 0.531977] 0000:04:00[C] -> [17] [ 0.531979] 0000:04:00[D] -> [18] [ 0.531988] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.4 is a PCI bridge [ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.532020] 0000:05:00[A] -> [16] [ 0.532023] 0000:05:00[B] -> [17] [ 0.532025] 0000:05:00[C] -> [18] [ 0.532028] 0000:05:00[D] -> [19] [ 0.532053] pci_bind-0085 [00] pci_bind : Device 0000:00:1c.5 is a PCI bridge [ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.532085] 0000:06:00[A] -> [17] [ 0.532087] 0000:06:00[B] -> [18] [ 0.532090] 0000:06:00[C] -> [19] [ 0.532092] 0000:06:00[D] -> [16] [ 0.532109] pci_bind-0085 [00] pci_bind : Device 0000:00:01.0 is a PCI bridge [ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.532141] 0000:01:00[A] -> [16] [ 0.532143] 0000:01:00[B] -> [17] [ 0.532146] 0000:01:00[C] -> [18] [ 0.532148] 0000:01:00[D] -> [19] [ 0.532198] \_SB_.PCI0:_OSC invalid UUID [ 0.532198] _OSC request data:1 1f 1f [ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.532239] \_SB_.PCI0:_OSC invalid UUID [ 0.532240] _OSC request data:1 0 1d [ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9 [ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0 [ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10 [ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10 possible IRQs [ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11 [ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.536069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.536078] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.536083] vgaarb: loaded [ 0.536085] vgaarb: bridge control possible 0000:01:00.0 [ 0.536087] vgaarb: no bridge control possible 0000:00:02.0 [ 0.536179] SCSI subsystem initialized [ 0.536213] libata version 3.00 loaded. [ 0.536245] usbcore: registered new interface driver usbfs [ 0.536257] usbcore: registered new interface driver hub [ 0.536277] usbcore: registered new device driver usb [ 0.536324] PCI: Using ACPI for IRQ routing [ 0.537738] PCI: pci_cache_line_size set to 64 bytes [ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff [ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff [ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff [ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.537947] NetLabel: Initializing [ 0.537950] NetLabel: domain hash size = 128 [ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.537961] NetLabel: unlabeled traffic allowed by default [ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.539993] Switching to clocksource hpet [ 0.541903] AppArmor: AppArmor Filesystem Enabled [ 0.541922] pnp: PnP ACPI init [ 0.541934] ACPI: bus type pnp registered [ 0.542307] pnp 00:00: [bus 00-3e] [ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.542313] pnp 00:00: [io 0x0d00-0xffff window] [ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.542387] pnp 00:01: [io 0x0000-0x001f] [ 0.542389] pnp 00:01: [io 0x0081-0x0091] [ 0.542390] pnp 00:01: [io 0x0093-0x009f] [ 0.542391] pnp 00:01: [io 0x00c0-0x00df] [ 0.542392] pnp 00:01: [dma 4] [ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.542511] pnp 00:03: [io 0x00f0] [ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542525] pnp 00:03: [irq 13] [ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.542550] pnp 00:04: [io 0x002e-0x002f] [ 0.542551] pnp 00:04: [io 0x004e-0x004f] [ 0.542553] pnp 00:04: [io 0x0061] [ 0.542555] pnp 00:04: [io 0x0063] [ 0.542556] pnp 00:04: [io 0x0065] [ 0.542557] pnp 00:04: [io 0x0067] [ 0.542558] pnp 00:04: [io 0x0068] [ 0.542559] pnp 00:04: [io 0x006c] [ 0.542560] pnp 00:04: [io 0x0070] [ 0.542561] pnp 00:04: [io 0x0080] [ 0.542562] pnp 00:04: [io 0x0092] [ 0.542563] pnp 00:04: [io 0x00b2-0x00b3] [ 0.542564] pnp 00:04: [io 0x0680-0x069f] [ 0.542566] pnp 00:04: [io 0x1000-0x1003] [ 0.542567] pnp 00:04: [io 0x1004-0x1013] [ 0.542568] pnp 00:04: [io 0xffff] [ 0.542569] pnp 00:04: [io 0x0400-0x0453] [ 0.542570] pnp 00:04: [io 0x0458-0x047f] [ 0.542571] pnp 00:04: [io 0x0500-0x057f] [ 0.542573] pnp 00:04: [io 0x164e-0x164f] [ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.542616] system 00:04: [io 0xffff] has been reserved [ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.542639] pnp 00:05: [io 0x0070-0x0077] [ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542649] pnp 00:05: [irq 8] [ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.542692] pnp 00:06: [io 0x0454-0x0457] [ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.542760] pnp 00:07: [io 0x0060] [ 0.542761] pnp 00:07: [io 0x0064] [ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542770] pnp 00:07: [irq 1] [ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.542824] pnp 00:08: [irq 12] [ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13 (active) [ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20 Mode:0 Active:0 Dest:1) [ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.543177] pnp 00:0a: [irq 20] [ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.543336] pnp: PnP ACPI: found 11 devices [ 0.543338] ACPI: ACPI bus type pnp unregistered [ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.549785] PCI: max bus depth: 1 pci_try_num: 2 [ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.549842] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:01.0[A] _PRT entry [ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16 Mode:1 Active:1 Dest:1) [ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549948] pci 0000:00:01.0: setting latency timer to 64 [ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.0[A] _PRT entry [ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.549965] pci 0000:00:1c.0: setting latency timer to 64 [ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.1[B] _PRT entry [ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17 Mode:1 Active:1 Dest:1) [ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.549988] pci 0000:00:1c.1: setting latency timer to 64 [ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.3[D] _PRT entry [ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1 Dest:1) [ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.550011] pci 0000:00:1c.3: setting latency timer to 64 [ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.4[A] _PRT entry [ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550027] pci 0000:00:1c.4: setting latency timer to 64 [ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1c.5[B] _PRT entry [ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.550050] pci 0000:00:1c.5: setting latency timer to 64 [ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff] [ 0.550125] NET: Registered protocol family 2 [ 0.550318] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.551888] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.553157] TCP: Hash tables configured (established 524288 bind 65536) [ 0.553161] TCP reno registered [ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.553308] NET: Registered protocol family 1 [ 0.553322] pci 0000:00:02.0: Boot video device [ 0.553459] PCI: CLS 64 bytes, default 64 [ 0.553496] Unpacking initramfs... [ 0.723042] Freeing initrd memory: 12380k freed [ 0.724650] DMAR: No ATSR found [ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation [ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation [ 0.724692] IOMMU: Setting RMRR: [ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0 [0xbb800000 - 0xbf9fffff] [ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbae1d000 - 0xbae33fff] [ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbae1d000 - 0xbae33fff] [ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.727095] audit: initializing netlink socket (disabled) [ 0.727106] type=2000 audit(1324949000.518:1): initialized [ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.765057] VFS: Disk quotas dquot_6.5.2 [ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.765302] msgmni has been set to 15909 [ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.765486] io scheduler noop registered (default) [ 0.765491] io scheduler deadline registered [ 0.765508] io scheduler cfq registered [ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11 [ 0.765917] vesafb: scrolling: redraw [ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 10240k, total 65472k [ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture... [ 0.767739] bootsplash: silentjpeg size 109002 bytes [ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3). [ 0.778101] bootsplash: silentjpeg size 126037 bytes [ 0.882677] Console: switching to colour frame buffer device 156x60 [ 0.962069] fb0: VESA VGA frame buffer device [ 0.962474] intel_idle: MWAIT substates: 0x21120 [ 0.962475] intel_idle: v0.4 model 0x2A [ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.962518] ERST: Table is not found! [ 0.962842] GHES: HEST is not enabled! [ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.084566] Non-volatile memory driver v1.3 [ 1.084937] Linux agpgart interface v0.103 [ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.089240] ahci 0000:00:1f.2: version 3.0 [ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.2[B] _PRT entry [ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.090657] ahci: SSS flag set, parallel bus scan disabled [ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.106635] scsi0 : ahci [ 1.106935] scsi1 : ahci [ 1.107220] scsi2 : ahci [ 1.107497] scsi3 : ahci [ 1.107773] scsi4 : ahci [ 1.108048] scsi5 : ahci [ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 43 [ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 43 [ 1.109687] ata3: DUMMY [ 1.109906] ata4: DUMMY [ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 43 [ 1.110785] ata6: DUMMY [ 1.111067] Fixed MDIO Bus: probed [ 1.111378] arcnet loaded. [ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1a.0[A] _PRT entry [ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.240042] usb usb1: Product: EHCI Host Controller [ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.306584] hub 1-0:1.0: USB hub found [ 1.328442] hub 1-0:1.0: 2 ports detected [ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1d.0[A] _PRT entry [ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23 Mode:1 Active:1 Dest:1) [ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473720] usb usb2: Product: EHCI Host Controller [ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd [ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.473841] hub 2-0:1.0: USB hub found [ 1.473845] hub 2-0:1.0: 2 ports detected [ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver [ 1.753069] Initializing USB Mass Storage driver... [ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz. [ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB, AXM08D1Q, max UDMA/133 [ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.757928] ata1.00: configured for UDMA/133 [ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 AXM0 PQ: 0 ANSI: 5 [ 1.912674] usbcore: registered new interface driver usb-storage [ 1.912675] USB Mass Storage support registered. [ 1.912682] usbcore: registered new interface driver ums-alauda [ 1.912688] usbcore: registered new interface driver ums-cypress [ 1.912694] usbcore: registered new interface driver ums-datafab [ 1.912701] usbcore: registered new interface driver ums-freecom [ 1.912707] usbcore: registered new interface driver ums-isd200 [ 1.912713] usbcore: registered new interface driver ums-jumpshot [ 1.912718] usbcore: registered new interface driver ums-karma [ 1.912724] usbcore: registered new interface driver ums-onetouch [ 1.912730] usbcore: registered new interface driver ums-sddr09 [ 1.912736] usbcore: registered new interface driver ums-sddr55 [ 1.912741] usbcore: registered new interface driver ums-usbat [ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.912807] i8042: [0] 20 -> i8042 (command) [ 1.913286] i8042: [0] 67 <- i8042 (return) [ 1.913347] i8042: [1] 20 -> i8042 (command) [ 1.913721] i8042: [1] 67 <- i8042 (return) [ 1.913726] i8042: [1] 60 -> i8042 (command) [ 1.913889] i8042: [1] 76 -> i8042 (parameter) [ 1.914109] i8042: [1] d3 -> i8042 (command) [ 1.914325] i8042: [1] 5a -> i8042 (parameter) [ 1.914544] i8042: [1] 5a <- i8042 (return) [ 1.914553] i8042: [2] a7 -> i8042 (command) [ 1.914661] i8042: [2] 20 -> i8042 (command) [ 1.914931] i8042: [2] 76 <- i8042 (return) [ 1.914935] i8042: [2] a8 -> i8042 (command) [ 1.915095] i8042: [2] 20 -> i8042 (command) [ 1.915364] i8042: [2] 56 <- i8042 (return) [ 1.915373] i8042: [3] 60 -> i8042 (command) [ 1.915536] i8042: [3] 74 -> i8042 (parameter) [ 1.915763] i8042: [3] d3 -> i8042 (command) [ 1.915978] i8042: [3] f0 -> i8042 (parameter) [ 1.916198] i8042: [3] f0 <- i8042 (return) [ 1.916222] i8042: [4] d3 -> i8042 (command) [ 1.916282] i8042: [4] 56 -> i8042 (parameter) [ 1.916555] i8042: [4] 56 <- i8042 (return) [ 1.916567] i8042: [4] d3 -> i8042 (command) [ 1.916783] i8042: [4] a4 -> i8042 (parameter) [ 1.917002] i8042: [4] a4 <- i8042 (return) [ 1.917027] i8042: [5] 60 -> i8042 (command) [ 1.917137] i8042: [5] 56 -> i8042 (parameter) [ 1.917309] i8042: [5] 60 -> i8042 (command) [ 1.917525] i8042: [5] 47 -> i8042 (parameter) [ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.917632] mousedev: PS/2 mouse device common for all mice [ 1.917760] i8042: [5] f2 -> i8042 (kbd-data) [ 1.917804] rtc_cmos 00:05: RTC can wake from S4 [ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.918037] cpuidle: using governor ladder [ 2.402856] i8042: [491] ed -> i8042 (kbd-data) [ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12) [ 2.402926] hpet1: lost 30 rtc interrupts [ 2.403065] cpuidle: using governor menu [ 2.403067] EFI Variables Facility v0.08 2004-May-17 [ 2.403295] usbcore: registered new interface driver usbhid [ 2.403297] usbhid: USB HID core driver [ 2.404035] i8042: [492] 00 -> i8042 (kbd-data) [ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1) [ 2.510940] i8042: [599] ed -> i8042 (kbd-data) [ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.511126] TCP cubic registered [ 2.511128] IPv6: Loaded, but administratively disabled, reboot required to enable [ 2.511144] lib80211: common routines for IEEE802.11 drivers [ 2.511145] lib80211_crypt: registered algorithm 'NULL' [ 2.511147] Registering the dns_resolver key type [ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 2.511169] [ 2.511169] printing PIC contents [ 2.511173] ... PIC IMR: ffff [ 2.511177] ... PIC IRR: 0c01 [ 2.511184] ... PIC ISR: 0000 [ 2.511187] ... PIC ELCR: 0e00 [ 2.643783] printing local APIC contents on CPU#0/0: [ 2.643784] ... APIC ID: 00000000 (0) [ 2.666176] ... APIC VERSION: 01060015 [ 2.688175] ... APIC TASKPRI: 00000000 (00) [ 2.688176] ... APIC PROCPRI: 00000000 [ 2.688177] ... APIC LDR: 00000001 [ 2.688178] ... APIC SPIV: 000001ff [ 2.688179] ... APIC ISR field: [ 2.688180] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.709866] i8042: [799] f4 -> i8042 (kbd-data) [ 2.710552] ... APIC TMR field: [ 2.710553] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.732661] ... APIC IRR field: [ 2.732662] 0000000002020000000200000000000000000000000000000000000000008000 [ 2.754421] ... APIC ESR: 00000000 [ 2.754422] ... APIC ICR: 000008fd [ 2.754422] ... APIC ICR2: 00000040 [ 2.754423] ... APIC LVTT: 000000ef [ 2.754424] ... APIC LVTPC: 00000400 [ 2.754425] ... APIC LVT0: 00010700 [ 2.754426] ... APIC LVT1: 00000400 [ 2.754427] ... APIC LVTERR: 000000fe [ 2.754428] ... APIC TMICT: 000004c0 [ 2.754428] ... APIC TMCCT: 00000000 [ 2.754429] ... APIC TDCR: 00000003 [ 2.754430] [ 2.775580] number of MP IRQ sources: 15. [ 2.775582] number of IO-APIC #2 registers: 24. [ 2.775583] testing the IO APIC....................... [ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1) [ 2.775695] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.775800] sd 0:0:0:0: [sda] Write Protect is off [ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133 [ 2.825187] ata2.00: configured for UDMA/133 [ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5 [ 2.995778] [ 2.995813] i8042: [1085] d4 -> i8042 (command) [ 2.995924] i8042: [1085] f2 -> i8042 (parameter) [ 2.995926] hub 1-1:1.0: USB hub found [ 2.996023] hub 1-1:1.0: 6 ports detected [ 2.997464] sda: sda1 sda2 [ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12) [ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12) [ 2.999939] i8042: [1089] 60 -> i8042 (command) [ 3.000102] i8042: [1089] 45 -> i8042 (parameter) [ 3.000317] i8042: [1089] 60 -> i8042 (command) [ 3.000531] i8042: [1089] 47 -> i8042 (parameter) [ 3.000767] i8042: [1089] d4 -> i8042 (command) [ 3.000930] i8042: [1089] f2 -> i8042 (parameter) [ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12) [ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12) [ 3.005871] i8042: [1095] d4 -> i8042 (command) [ 3.006034] i8042: [1095] f6 -> i8042 (parameter) [ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12) [ 3.009391] i8042: [1099] d4 -> i8042 (command) [ 3.009609] i8042: [1099] f3 -> i8042 (parameter) [ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12) [ 3.012042] i8042: [1101] d4 -> i8042 (command) [ 3.012206] i8042: [1101] 0a -> i8042 (parameter) [ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12) [ 3.015508] i8042: [1105] d4 -> i8042 (command) [ 3.015725] i8042: [1105] e8 -> i8042 (parameter) [ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12) [ 3.018029] i8042: [1107] d4 -> i8042 (command) [ 3.018192] i8042: [1107] 00 -> i8042 (parameter) [ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12) [ 3.020643] i8042: [1110] d4 -> i8042 (command) [ 3.020807] i8042: [1110] f3 -> i8042 (parameter) [ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12) [ 3.023302] i8042: [1112] d4 -> i8042 (command) [ 3.023465] i8042: [1112] 14 -> i8042 (parameter) [ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12) [ 3.026083] i8042: [1115] d4 -> i8042 (command) [ 3.026247] i8042: [1115] f3 -> i8042 (parameter) [ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12) [ 3.029440] i8042: [1119] d4 -> i8042 (command) [ 3.029708] i8042: [1119] 3c -> i8042 (parameter) [ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12) [ 3.031981] i8042: [1121] d4 -> i8042 (command) [ 3.032144] i8042: [1121] f3 -> i8042 (parameter) [ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12) [ 3.034987] i8042: [1124] d4 -> i8042 (command) [ 3.035149] i8042: [1124] 28 -> i8042 (parameter) [ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12) [ 3.037436] i8042: [1127] d4 -> i8042 (command) [ 3.037600] i8042: [1127] f3 -> i8042 (parameter) [ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12) [ 3.040490] i8042: [1130] d4 -> i8042 (command) [ 3.040757] i8042: [1130] 14 -> i8042 (parameter) [ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12) [ 3.043034] i8042: [1132] d4 -> i8042 (command) [ 3.043198] i8042: [1132] f3 -> i8042 (parameter) [ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12) [ 3.046243] i8042: [1135] d4 -> i8042 (command) [ 3.046408] i8042: [1135] 14 -> i8042 (parameter) [ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12) [ 3.048718] i8042: [1138] d4 -> i8042 (command) [ 3.048882] i8042: [1138] f3 -> i8042 (parameter) [ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12) [ 3.051926] i8042: [1141] d4 -> i8042 (command) [ 3.052194] i8042: [1141] 3c -> i8042 (parameter) [ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12) [ 3.054467] i8042: [1144] d4 -> i8042 (command) [ 3.054630] i8042: [1144] f3 -> i8042 (parameter) [ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12) [ 3.060853] i8042: [1150] d4 -> i8042 (command) [ 3.061069] i8042: [1150] 28 -> i8042 (parameter) [ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12) [ 3.063316] i8042: [1153] d4 -> i8042 (command) [ 3.063479] i8042: [1153] f3 -> i8042 (parameter) [ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12) [ 3.066166] i8042: [1155] d4 -> i8042 (command) [ 3.066329] i8042: [1155] 14 -> i8042 (parameter) [ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12) [ 3.068608] i8042: [1158] d4 -> i8042 (command) [ 3.068772] i8042: [1158] f3 -> i8042 (parameter) [ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12) [ 3.071780] i8042: [1161] d4 -> i8042 (command) [ 3.071943] i8042: [1161] 14 -> i8042 (parameter) [ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12) [ 3.074285] i8042: [1164] d4 -> i8042 (command) [ 3.074448] i8042: [1164] f2 -> i8042 (parameter) [ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12) [ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12) [ 3.077922] i8042: [1167] d4 -> i8042 (command) [ 3.078085] i8042: [1167] e8 -> i8042 (parameter) [ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12) [ 3.080830] i8042: [1170] d4 -> i8042 (command) [ 3.081046] i8042: [1170] 00 -> i8042 (parameter) [ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12) [ 3.083288] i8042: [1173] d4 -> i8042 (command) [ 3.083555] i8042: [1173] e8 -> i8042 (parameter) [ 3.085294] IO APIC #2...... [ 3.085295] .... register #00: 02000000 [ 3.085296] ....... : physical APIC id: 02 [ 3.085297] ....... : Delivery Type: 0 [ 3.085298] ....... : LTS : 0 [ 3.085299] .... register #01: 00170020 [ 3.085300] ....... : max redirection entries: 17 [ 3.085301] ....... : PRQ implemented: 0 [ 3.085302] ....... : IO APIC version: 20 [ 3.085302] .... IRQ redirection table: [ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: [ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00 [ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01 [ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02 [ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03 [ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04 [ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05 [ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06 [ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07 [ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08 [ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09 [ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A [ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B [ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C [ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D [ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E [ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F [ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10 [ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11 [ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00 [ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13 [ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14 [ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00 [ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00 [ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17 [ 3.085428] IRQ to pin mappings: [ 3.085429] IRQ0 -> 0:2 [ 3.085431] IRQ1 -> 0:1 [ 3.085432] IRQ3 -> 0:3 [ 3.085433] IRQ4 -> 0:4 [ 3.085435] IRQ5 -> 0:5 [ 3.085436] IRQ6 -> 0:6 [ 3.085437] IRQ7 -> 0:7 [ 3.085438] IRQ8 -> 0:8 [ 3.085440] IRQ9 -> 0:9 [ 3.085441] IRQ10 -> 0:10 [ 3.085443] IRQ11 -> 0:11 [ 3.085444] IRQ12 -> 0:12 [ 3.085445] IRQ13 -> 0:13 [ 3.085446] IRQ14 -> 0:14 [ 3.085448] IRQ15 -> 0:15 [ 3.085449] IRQ16 -> 0:16 [ 3.085450] IRQ17 -> 0:17 [ 3.085451] IRQ19 -> 0:19 [ 3.085453] IRQ20 -> 0:20 [ 3.085454] IRQ23 -> 0:23 [ 3.085455] .................................... done. [ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12) [ 3.086492] i8042: [1176] d4 -> i8042 (command) [ 3.086656] i8042: [1176] 00 -> i8042 (parameter) [ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12) [ 3.089102] i8042: [1178] d4 -> i8042 (command) [ 3.089370] i8042: [1178] e8 -> i8042 (parameter) [ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12) [ 3.092012] i8042: [1181] d4 -> i8042 (command) [ 3.092227] i8042: [1181] 00 -> i8042 (parameter) [ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12) [ 3.094483] i8042: [1184] d4 -> i8042 (command) [ 3.094648] i8042: [1184] e8 -> i8042 (parameter) [ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12) [ 3.097161] i8042: [1186] d4 -> i8042 (command) [ 3.097427] i8042: [1186] 00 -> i8042 (parameter) [ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12) [ 3.099675] i8042: [1189] d4 -> i8042 (command) [ 3.099838] i8042: [1189] e9 -> i8042 (parameter) [ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12) [ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12) [ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12) [ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12) [ 3.105799] i8042: [1195] d4 -> i8042 (command) [ 3.106067] i8042: [1195] f6 -> i8042 (parameter) [ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12) [ 3.108600] i8042: [1198] d4 -> i8042 (command) [ 3.108762] i8042: [1198] e8 -> i8042 (parameter) [ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12) [ 3.111677] i8042: [1201] d4 -> i8042 (command) [ 3.111945] i8042: [1201] 00 -> i8042 (parameter) [ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12) [ 3.114254] i8042: [1204] d4 -> i8042 (command) [ 3.114522] i8042: [1204] e6 -> i8042 (parameter) [ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12) [ 3.117214] i8042: [1207] d4 -> i8042 (command) [ 3.117378] i8042: [1207] e6 -> i8042 (parameter) [ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12) [ 3.119715] i8042: [1209] d4 -> i8042 (command) [ 3.119880] i8042: [1209] e6 -> i8042 (parameter) [ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12) [ 3.123105] i8042: [1212] d4 -> i8042 (command) [ 3.123320] i8042: [1212] e9 -> i8042 (parameter) [ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12) [ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12) [ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12) [ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12) [ 3.128731] i8042: [1218] d4 -> i8042 (command) [ 3.128894] i8042: [1218] f6 -> i8042 (parameter) [ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12) [ 3.132101] i8042: [1221] d4 -> i8042 (command) [ 3.132265] i8042: [1221] f5 -> i8042 (parameter) [ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12) [ 3.134786] i8042: [1224] d4 -> i8042 (command) [ 3.134949] i8042: [1224] e6 -> i8042 (parameter) [ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12) [ 3.137773] i8042: [1227] d4 -> i8042 (command) [ 3.137935] i8042: [1227] e6 -> i8042 (parameter) [ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12) [ 3.140385] i8042: [1230] d4 -> i8042 (command) [ 3.140654] i8042: [1230] e6 -> i8042 (parameter) [ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12) [ 3.143076] i8042: [1232] d4 -> i8042 (command) [ 3.143291] i8042: [1232] e9 -> i8042 (parameter) [ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12) [ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12) [ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12) [ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12) [ 3.148796] i8042: [1238] d4 -> i8042 (command) [ 3.148959] i8042: [1238] e8 -> i8042 (parameter) [ 3.151988] PM: Checking hibernation image partition /dev/system/swap [ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12) [ 3.152134] i8042: [1241] d4 -> i8042 (command) [ 3.152298] i8042: [1242] 03 -> i8042 (parameter) [ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12) [ 3.154707] i8042: [1244] d4 -> i8042 (command) [ 3.154818] i8042: [1244] e6 -> i8042 (parameter) [ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12) [ 3.157971] i8042: [1247] d4 -> i8042 (command) [ 3.158134] i8042: [1247] e6 -> i8042 (parameter) [ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12) [ 3.160558] i8042: [1250] d4 -> i8042 (command) [ 3.160669] i8042: [1250] e6 -> i8042 (parameter) [ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12) [ 3.163788] i8042: [1253] d4 -> i8042 (command) [ 3.163900] i8042: [1253] e9 -> i8042 (parameter) [ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12) [ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12) [ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12) [ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12) [ 3.169856] i8042: [1259] d4 -> i8042 (command) [ 3.169966] i8042: [1259] e8 -> i8042 (parameter) [ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12) [ 3.173421] i8042: [1263] d4 -> i8042 (command) [ 3.173639] i8042: [1263] 00 -> i8042 (parameter) [ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12) [ 3.176044] i8042: [1265] d4 -> i8042 (command) [ 3.176209] i8042: [1265] e6 -> i8042 (parameter) [ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12) [ 3.178820] i8042: [1268] d4 -> i8042 (command) [ 3.178931] i8042: [1268] e6 -> i8042 (parameter) [ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12) [ 3.181499] i8042: [1271] d4 -> i8042 (command) [ 3.182240] i8042: [1271] e6 -> i8042 (parameter) [ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12) [ 3.184842] i8042: [1274] d4 -> i8042 (command) [ 3.184954] i8042: [1274] e9 -> i8042 (parameter) [ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12) [ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12) [ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12) [ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12) [ 3.190841] i8042: [1280] d4 -> i8042 (command) [ 3.190953] i8042: [1280] e1 -> i8042 (parameter) [ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.259900] hub 2-1:1.0: USB hub found [ 3.281547] hub 2-1:1.0: 8 ports detected [ 3.299961] ata5: SATA link down (SStatus 0 SControl 300) [ 3.389927] i8042: [1480] d4 -> i8042 (command) [ 3.390091] i8042: [1480] 0a -> i8042 (parameter) [ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=642a [ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.589561] i8042: [1680] d4 -> i8042 (command) [ 3.589671] i8042: [1680] f5 -> i8042 (parameter) [ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12) [ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM [ 3.604613] i8042: [1695] d4 -> i8042 (command) [ 3.604725] i8042: [1695] f3 -> i8042 (parameter) [ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12) [ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00 [ 3.626320] i8042: [1716] d4 -> i8042 (command) [ 3.626484] i8042: [1716] 66 -> i8042 (parameter) [ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12) [ 3.648259] i8042: [1738] d4 -> i8042 (command) [ 3.648424] i8042: [1738] 88 -> i8042 (parameter) [ 3.678465] i8042: [1769] d4 -> i8042 (command) [ 3.678643] i8042: [1769] f3 -> i8042 (parameter) [ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12) [ 3.681225] i8042: [1771] d4 -> i8042 (command) [ 3.681336] i8042: [1771] f4 -> i8042 (parameter) [ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12) [ 3.684574] i8042: [1775] d4 -> i8042 (command) [ 3.684791] i8042: [1775] f6 -> i8042 (parameter) [ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12) [ 3.688507] i8042: [1779] d4 -> i8042 (command) [ 3.689512] i8042: [1779] ff -> i8042 (parameter) [ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12) [ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd [ 3.838521] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12) [ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12) [ 3.893215] i8042: [1984] d4 -> i8042 (command) [ 3.893483] i8042: [1984] f3 -> i8042 (parameter) [ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12) [ 3.896676] i8042: [1987] d4 -> i8042 (command) [ 3.896787] i8042: [1987] c8 -> i8042 (parameter) [ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12) [ 3.899238] i8042: [1990] d4 -> i8042 (command) [ 3.899454] i8042: [1990] f3 -> i8042 (parameter) [ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12) [ 3.902664] i8042: [1993] d4 -> i8042 (command) [ 3.902775] i8042: [1993] 64 -> i8042 (parameter) [ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12) [ 3.905283] i8042: [1996] d4 -> i8042 (command) [ 3.905973] i8042: [1996] f3 -> i8042 (parameter) [ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12) [ 3.908653] i8042: [1999] d4 -> i8042 (command) [ 3.908765] i8042: [1999] 50 -> i8042 (parameter) [ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12) [ 3.911743] i8042: [2002] d4 -> i8042 (command) [ 3.911855] i8042: [2002] f2 -> i8042 (parameter) [ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12) [ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12) [ 3.915406] i8042: [2006] d4 -> i8042 (command) [ 3.916096] i8042: [2006] f3 -> i8042 (parameter) [ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12) [ 3.918752] i8042: [2009] d4 -> i8042 (command) [ 3.918864] i8042: [2009] c8 -> i8042 (parameter) [ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12) [ 3.921958] i8042: [2012] d4 -> i8042 (command) [ 3.922122] i8042: [2012] f3 -> i8042 (parameter) [ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12) [ 3.924738] i8042: [2015] d4 -> i8042 (command) [ 3.924850] i8042: [2015] c8 -> i8042 (parameter) [ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12) [ 3.927502] i8042: [2018] d4 -> i8042 (command) [ 3.927667] i8042: [2018] f3 -> i8042 (parameter) [ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12) [ 3.930313] i8042: [2021] d4 -> i8042 (command) [ 3.931428] i8042: [2021] 50 -> i8042 (parameter) [ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12) [ 3.933824] i8042: [2024] d4 -> i8042 (command) [ 3.933936] i8042: [2024] f2 -> i8042 (parameter) [ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12) [ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12) [ 3.937931] i8042: [2028] d4 -> i8042 (command) [ 3.938042] i8042: [2028] f3 -> i8042 (parameter) [ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12) [ 3.941554] i8042: [2032] d4 -> i8042 (command) [ 3.941770] i8042: [2032] c8 -> i8042 (parameter) [ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12) [ 3.944219] i8042: [2035] d4 -> i8042 (command) [ 3.944330] i8042: [2035] f3 -> i8042 (parameter) [ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12) [ 3.947324] i8042: [2038] d4 -> i8042 (command) [ 3.947488] i8042: [2038] 64 -> i8042 (parameter) [ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12) [ 3.949903] i8042: [2040] d4 -> i8042 (command) [ 3.950015] i8042: [2040] f3 -> i8042 (parameter) [ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12) [ 3.952941] i8042: [2043] d4 -> i8042 (command) [ 3.953053] i8042: [2043] 50 -> i8042 (parameter) [ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12) [ 3.955589] i8042: [2046] d4 -> i8042 (command) [ 3.955753] i8042: [2046] f2 -> i8042 (parameter) [ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12) [ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12) [ 3.959980] i8042: [2051] d4 -> i8042 (command) [ 3.960092] i8042: [2051] f3 -> i8042 (parameter) [ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12) [ 3.963213] i8042: [2054] d4 -> i8042 (command) [ 3.963378] i8042: [2054] 64 -> i8042 (parameter) [ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12) [ 3.965945] i8042: [2056] d4 -> i8042 (command) [ 3.966056] i8042: [2056] e8 -> i8042 (parameter) [ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12) [ 3.968794] i8042: [2059] d4 -> i8042 (command) [ 3.968959] i8042: [2059] 03 -> i8042 (parameter) [ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12) [ 3.971398] i8042: [2062] d4 -> i8042 (command) [ 3.974350] i8042: [2062] e6 -> i8042 (parameter) [ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12) [ 3.977018] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 4.000810] i8042: [2091] d4 -> i8042 (command) [ 4.000921] i8042: [2091] f4 -> i8042 (parameter) [ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12) [ 4.003598] PM: Hibernation image not present or could not be loaded. [ 4.003620] registered taskstats version 1 [ 4.035412] Magic number: 7:990:357 [ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27 01:23:24 UTC (1324949004) [ 4.085662] Freeing unused kernel memory: 944k freed [ 4.110469] Write protecting the kernel read-only data: 12288k [ 4.135741] Freeing unused kernel memory: 192k freed [ 4.164739] Freeing unused kernel memory: 1944k freed [ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.266531] shpchp: shpcd_init: pci_register_driver = 0 [ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.322294] udevd[131]: starting version 173 [ 4.356829] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 4.393554] ACPI: Power Button [PWRB] [ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.393743] ACPI: Thermal Zone [TZ00] (54 C) [ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.393981] ACPI: Thermal Zone [TZ01] (54 C) [ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found 0000:04:00.0[A] _PRT entry [ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 4.523002] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.523047] usb usb3: Product: xHCI Host Controller [ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.523050] usb usb3: SerialNumber: 0000:04:00.0 [ 4.523265] xHCI xhci_add_endpoint called for root hub [ 4.523267] xHCI xhci_check_bandwidth called for root hub [ 4.523328] hub 3-0:1.0: USB hub found [ 4.523339] hub 3-0:1.0: 2 ports detected [ 4.523379] ACPI: Sleep Button [SLPB] [ 4.523426] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 4.524286] ACPI: Lid Switch [LID0] [ 4.524340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.524373] ACPI: Power Button [PWRF] [ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.526220] usb usb4: Product: xHCI Host Controller [ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd [ 4.526223] usb usb4: SerialNumber: 0000:04:00.0 [ 4.526375] xHCI xhci_add_endpoint called for root hub [ 4.526377] xHCI xhci_check_bandwidth called for root hub [ 4.526439] hub 4-0:1.0: USB hub found [ 4.526448] hub 4-0:1.0: 2 ports detected [ 4.526942] [drm] Initialized drm 1.1.0 20060810 [ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:02.0[A] _PRT entry [ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.531292] i915 0000:00:02.0: setting latency timer to 64 [ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.368667] [drm] Driver supports precise vblank timestamp query. [ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 5.378837] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027 [ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.647346] usb 3-1: Product: USB Multimedia Keyboard [ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp. [ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6 [ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input0 [ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7 [ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:04:00.0-1/input1 [ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608 [ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.895947] usb 3-2: Product: USB2.0 Hub [ 5.901665] hub 3-2:1.0: USB hub found [ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 5.911512] hub 3-2:1.0: 4 ports detected [ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000) [ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 5.950427] Console: switching to colour dummy device 80x25 [ 5.951515] fbcon: inteldrmfb (fb0) is primary device [ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd [ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0608 [ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.201327] usb 3-2.4: Product: USB2.0 Hub [ 6.202290] hub 3-2.4:1.0: USB hub found [ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.202925] hub 3-2.4:1.0: 4 ports detected [ 6.313235] Console: switching to colour frame buffer device 236x63 [ 6.334979] fb0: inteldrmfb frame buffer device [ 6.335054] drm: registered panic notifier [ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 6.338677] acpi device:2e: registered as cooling_device4 [ 6.338816] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8 [ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 6.343258] acpi device:32: registered as cooling_device5 [ 6.343536] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.402163] Btrfs loaded [ 6.443076] md: linear personality registered for level -1 [ 6.478910] device-mapper: uevent: version 1.0.3 [ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd [ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d, idProduct=c063 [ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse [ 6.519906] usb 3-2.4.4: Manufacturer: DELL [ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.536487] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10 [ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0 [ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000 [ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000 [ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000 [ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000 [ 39.517655] PM: Basic memory bitmaps created [ 39.540690] PM: Basic memory bitmaps freed [ 39.540694] video LNXVIDEO:00: Restoring backlight state [ 39.540695] video LNXVIDEO:01: Restoring backlight state [ 39.590164] PM: Starting manual resume from disk [ 39.595666] PM: Hibernation image partition 253:3 present [ 39.595669] PM: Looking for hibernation image. [ 39.597171] PM: Image not found (code -22) [ 39.597173] PM: Hibernation image not present or could not be loaded. [ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1 transid 21081 /dev/mapper/system-root [ 39.616353] btrfs: turning off barriers [ 39.616356] btrfs: enabling auto defrag [ 39.616357] btrfs: use lzo compression [ 39.616358] btrfs: disk space caching is enabled [ 39.661102] Btrfs detected SSD devices, enabling SSD mode [ 40.401467] btrfs: turning off barriers [ 40.407291] btrfs: enabling auto defrag [ 40.407352] btrfs: use lzo compression [ 40.418719] btrfs: disk space caching is enabled [ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>. [ 41.272117] udevd[606]: starting version 173 [ 41.435290] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:16.0[A] _PRT entry [ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.435834] mei 0000:00:16.0: setting latency timer to 64 [ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X [ 41.473031] iTCO_vendor_support: vendor-support=0 [ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found 0000:06:00.0[A] _PRT entry [ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64 [ 41.487779] mtp-probe[752]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1" [ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1f.3[C] _PRT entry [ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1 Dest:1) [ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device [ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 41.528598] mtp-probe[776]: checking bus 3, device 5: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4" [ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device [ 41.538647] btrfs: turning off barriers [ 41.538650] btrfs: enabling auto defrag [ 41.538653] btrfs: use lzo compression [ 41.538653] btrfs: disk space caching is enabled [ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.568681] mtp-probe[794]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4" [ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device [ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 41.597648] Bluetooth: Core ver 2.16 [ 41.603983] NET: Registered protocol family 31 [ 41.608008] ACPI: AC Adapter [ADP0] (on-line) [ 41.614610] Bluetooth: HCI device and connection manager initialized [ 41.614613] Bluetooth: HCI socket layer initialized [ 41.614615] Bluetooth: L2CAP socket layer initialized [ 41.614622] Bluetooth: SCO socket layer initialized [ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 41.654637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 41.681836] ACPI: Battery Slot [BAT0] (battery present) [ 41.687239] wmi: Mapper loaded [ 41.693494] Linux video capture interface: v2.00 [ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 41.702161] usbcore: registered new interface driver btusb [ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 41.742658] cfg80211: Calling CRDA to update world regulatory domain [ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 41.766095] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0c45:642a) [ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 41.778771] Copyright(c) 2003-2011 Intel Corporation [ 41.778833] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12 [ 41.778960] usbcore: registered new interface driver uvcvideo [ 41.778962] USB Video Class driver (1.1.1) [ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found 0000:00:1b.0[A] _PRT entry [ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found 0000:03:00.0[A] _PRT entry [ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64 [ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000 [ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X [ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0 [ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 41.829386] ifup[893]: Service network not started and mode 'auto' -> skipping [ 41.852847] cfg80211: World regulatory domain updated: [ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22 Mode:1 Active:1 Dest:1) [ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001 SID:F0F8 SQ:0 SVT:1) [ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13 [ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1 build 33993 [ 41.940849] Registered led device: phy0-led [ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 42.010557] ifup[964]: Service network not started and mode 'auto' -> skipping [ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap. Priority:0 extents:1 across:2097148k SS [ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d [ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1 [ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1 [ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007 [ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a [ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5 [ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1 [ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0 [ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1 [ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0 [ 45.437901] ALSA hda_codec.c:4964 inputs: [ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12 [ 45.437904] ALSA hda_codec.c:4968 Mic=0x18 [ 45.437905] ALSA hda_codec.c:4970 [ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d [ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269 [ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 45.453689] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 45.458609] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active. [ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros, 137097/159744 bloques [ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1 transid 22126 /dev/mapper/system-home [ 45.829949] btrfs: turning off barriers [ 45.834896] btrfs: enabling auto defrag [ 45.834957] btrfs: use lzo compression [ 45.840735] EXT4-fs (sda1): barriers disabled [ 45.849518] btrfs: disk space caching is enabled [ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: acl,barrier=0,data=writeback,user_xattr [ 45.869431] Btrfs detected SSD devices, enabling SSD mode [ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.174581] Bluetooth: BNEP filters: protocol multicast [ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.337233] Bluetooth: RFCOMM TTY layer initialized [ 47.337238] Bluetooth: RFCOMM socket layer initialized [ 47.337239] Bluetooth: RFCOMM ver 1.11 [ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X [ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 47.648775] NET: Registered protocol family 17 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
On Mon, Dec 26, 2011 at 10:42:06PM -0300, Cristian Rodríguez wrote:
[ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1 transid 21081 /dev/mapper/system-root [ 39.616353] btrfs: turning off barriers
why do you use the 'nobarrier' option? you're risking loss of data and an unmountable filesystem upon power outage or system crash. david -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
On 27/12/11 13:04, David Sterba wrote:
On Mon, Dec 26, 2011 at 10:42:06PM -0300, Cristian Rodríguez wrote:
[ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1 transid 21081 /dev/mapper/system-root [ 39.616353] btrfs: turning off barriers
why do you use the 'nobarrier' option?
well, I want it as fast as possible. you're risking loss of data and
an unmountable filesystem upon power outage or system crash.
Im aware of that ;-) The laptop is battery backed, and shuts down when battery is critical.. currently only crashes/hangs before mounting any file system. (just before attempting to unlock the encrypted volume) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
On Sun, Dec 25, 2011 at 5:20 PM, Cristian Rodríguez <crrodriguez@opensuse.org> wrote:
Heh, today I tested a crazy theory I had about this problem, turned out to be somewhat accurate.. it is not that the machine that hangs always, but it deceivingly "appears" to hang as I cannot get past the cryptsetup password prompt.. it is the keyboard controller that becomes non responsive, that 's it either before the "prompt" (where it hangs) or right after showing it. (in that scenario the USB port works, as plugin and removing a device shows the relevant events in the console)
It is random, let's say, the USB port works twice every three boots.
If it's just USB or keyboard that's non-responsive, you may be able to ssh into the box and collect a dmesg log. Oh, but I suppose ssh is not going to work if you're stuck at cryptsetup. Netconsole might work, if your kernel supports it. Or maybe a video of a text-mode boot? It might be instructive to compare the log with no options with a log using one of the options you found that seems to help. Bjorn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org
participants (3)
-
Bjorn Helgaas -
Cristian Rodríguez -
David Sterba