Hi, I am on business trip now, so my bbb is not reachable. But I see that the following 13.2 image seems to have proper kernel: http://download.opensuse.org/ports/armv7hl/distribution/13.2/appliances/open... Could you check please, that it boots at least? 2014-10-22 11:08 GMT+04:00 <lists@lazygranch.com>:
I can't do much beyond testing. Is there a 13.2 you would like tested?
Original Message From: Matwey V. Kornilov Sent: Tuesday, October 21, 2014 8:12 AM To: lists Subject: Re: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
Hm
I have not tested zypper update. /boot/initrd file is missed in your system, that is the problem. The question is why it is missed.
2014-10-21 14:42 GMT+04:00 lists <lists@lazygranch.com>:
As I suspected /sbin/reboot and systemctl reboot are identical, so that was not the problem.
After issuing a zypper update, the system will not reboot. Log file follows: ---------------------------------------------- There are some running programs that use files deleted by recent upgrade. You may wish to restart some of them. Run 'zypper ps' to list these programs. linux:~ # linux:~ # systemctl reboot [ OK ] Stopped target System Time Synchronized. Stopping User Manager for 0... Stopping ifup managed network interface eth0... [ OK ] Stopped target Graphical Interface. [ OK ] Stopped target Multi-User System. Stopping LSB: Network time protocol daemon (ntpd)... Stopping D-Bus System Message Bus... Stopping Command Scheduler... Stopping OpenSSH Daemon... Stopping /etc/init.d/after.local Compatibility... [ OK ] Stopped /etc/init.d/after.local Compatibility. Stopping Login Service... [ OK ] Stopped target Login Prompts. Stopping Serial Getty on ttyO0... Stopping Getty on tty1... Stopping System Logging Service... Starting Store Sound Card State... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Command Scheduler. [ OK ] Stopped Getty on tty1. [ OK ] Stopped User Manager for 0. [ OK ] Stopped Login Service. [ OK ] Stopped WPA Supplicant daemon. [ OK ] Stopped System Logging Service. [ OK ] Stopped OpenSSH Daemon. [FAILED] Failed to start Store Sound Card State. See 'systemctl status alsa-store.service' for details. [ OK ] Removed slice user-0.slice. [ OK ] Removed slice system-getty.slice. [ OK ] Unmounted /var/lib/ntp/proc. [ OK ] Stopped LSB: Network time protocol daemon (ntpd). [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Stopped Serial Getty on ttyO0. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping /etc/init.d/boot.local Compatibility... [ OK ] Stopped /etc/init.d/boot.local Compatibility. [ OK ] Stopped target Network. Stopping LSB: Configure network interfaces and set up routing... Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped ifup managed network interface eth0. [ OK ] Removed slice system-network.slice. [ OK ] Stopped LSB: Configure network interfaces and set up routing. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped target Timers. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed Syslog Socket. [ OK ] Stopped target System Initialization. Stopping Apply Kernel Variables... [ OK ] Stopped Apply Kernel Variables. Stopping Setup Virtual Console... [ OK ] Stopped Setup Virtual Console. [ OK ] Stopped target Encrypted Volumes. Unmounting /sys/kernel/debug... Stopping Load Kernel Modules... [ OK ] Stopped Load Kernel Modules. Stopping Load/Save Random Seed... Stopping Update UTMP about System Reboot/Shutdown... [ OK ] Stopped target Swap. Deactivating swap /dev/mmcblk0p3... Deactivating swap /dev/mmcblk0p3... Deactivating swap /dev/mmcblk0p3... Deactivating swap /dev/mmcblk0p3... [ OK ] Unmounted /sys/kernel/debug. [ OK ] Stopped Load/Save Random Seed. [ OK ] Deactivated swap /dev/mmcblk0p3. [ OK ] Deactivated swap /dev/disk/by-uuid/3266908b-29c8-4e7...b-973603a14145. [ OK ] Deactivated swap /dev/disk/by-path/platform-48060000.mmc-part3. [ OK ] Deactivated swap /dev/disk/by-id/mmc-SD32G_0x0169c961-part3. [ OK ] Stopped Update UTMP about System Reboot/Shutdown. Stopping Recreate Volatile Files and Directories... [ OK ] Stopped Recreate Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting Runtime Directory... Unmounting /boot... Unmounting Lock Directory... [ OK ] Unmounted Runtime Directory. [ OK ] Unmounted Lock Directory. [ OK ] Unmounted /boot. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). Stopping LSB: Multiple Device RAID... Stopping Remount Root and Kernel File Systems... [ OK ] Stopped Remount Root and Kernel File Systems. Stopping Replay Read-Ahead Data... [ OK ] Stopped Replay Read-Ahead Data. Stopping Collect Read-Ahead Data... [ OK ] Stopped Collect Read-Ahead Data. [ OK ] Stopped LSB: Multiple Device RAID. [ OK ] Reached target Shutdown. Sending SIGTERM to remaining processes... Sending SIGKILL to remaining processes... Hardware watchdog 'OMAP Watchdog', version 0 Unmounting file systems. Unmounting /dev/mqueue. All filesystems unmounted. Deactivating swaps. All swaps deactivated. Detaching loop devices. All loop devices detached. Detaching DM devices. All DM devices detached. Storage is finalized. [ 3460.794319] reboot: Restarting system
U-Boot SPL 2013.04 (Mar 17 2014 - 15:34:07) musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 OMAP SD/MMC: 0
U-Boot 2013.04 (Mar 17 2014 - 15:34:07)
I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 mmc0 is current device SD/MMC found on device 0 1950 bytes read in 8 ms (237.3 KiB/s) Running bootscript from mmc0 ... ## Executing script at 80200000 kerneladdr=0x80200000 ramdiskaddr=0x81000000 mmc0 is current device 4504224 bytes read in 607 ms (7.1 MiB/s) ** File not found initrd ** 21959 bytes read in 19 ms (1.1 MiB/s) ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f885c6
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.10-102-default (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP Mon Oct 6 12:30:22 UTC 2014 (afaa845) [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e35000 s14848 r8192 d13824 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: root=/dev/disk/by-id/mmc-SD32G_0x0169c961-part2 loader=uboot disk=/dev/disk/by-id/mmc-SD32G_0x0169c961 resume=/dev/disk/by-id/mmc-SD32G_0x0169c961-part3 plymouth.enable=0 console=ttyO0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 486400K/523264K available (5744K kernel code, 653K rwdata, 2468K rodata, 542K init, 961K bss, 36864K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc080d488 (8214 kB) [ 0.000000] .init : 0xc080e000 - 0xc0895a00 ( 543 kB) [ 0.000000] .data : 0xc0896000 - 0xc09397f0 ( 654 kB) [ 0.000000] .bss : 0xc09397f0 - 0xc0a29bf0 ( 961 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=5 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000439] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912) [ 0.119750] pid_max: default: 32768 minimum: 301 [ 0.119910] Security Framework initialized [ 0.120043] AppArmor: AppArmor initialized [ 0.120275] Mount-cache hash table entries: 512 [ 0.126681] Initializing cgroup subsys memory [ 0.126768] Initializing cgroup subsys devices [ 0.126795] Initializing cgroup subsys freezer [ 0.126809] Initializing cgroup subsys net_cls [ 0.126821] Initializing cgroup subsys blkio [ 0.126833] Initializing cgroup subsys perf_event [ 0.126934] CPU: Testing write buffer coherency: ok [ 0.127494] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.127577] Setting up static identity map for 0xc0570678 - 0xc05706d0 [ 0.132972] Brought up 1 CPUs [ 0.133002] SMP: Total of 1 processors activated (366.18 BogoMIPS). [ 0.133014] CPU: All CPU(s) started in SVC mode. [ 0.134258] devtmpfs: initialized [ 0.199509] pinctrl core: initialized pinctrl subsystem [ 0.200243] regulator-dummy: no parameters [ 0.202072] NET: Registered protocol family 16 [ 0.205994] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.216203] platform 49000000.edma: alias fck already exists [ 0.216235] platform 49000000.edma: alias fck already exists [ 0.216255] platform 49000000.edma: alias fck already exists [ 0.217357] OMAP GPIO hardware version 0.1 [ 0.225102] platform 48310000.rng: Cannot lookup hwmod 'rng' [ 0.225624] No ATAGs? [ 0.225642] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.227111] omap_init_mbox: hwmod doesn't have valid attrs [ 0.228658] Serial: AMBA PL011 UART driver [ 0.235854] bio: create slab <bio-0> at 0 [ 0.246546] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.247303] vmmcsd_fixed: 3300 mV [ 0.250697] SCSI subsystem initialized [ 0.251444] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.251478] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.253210] NetLabel: Initializing [ 0.253232] NetLabel: domain hash size = 128 [ 0.253241] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.253330] NetLabel: unlabeled traffic allowed by default [ 0.253610] Switched to clocksource timer1 [ 0.273147] AppArmor: AppArmor Filesystem Enabled [ 0.289058] NET: Registered protocol family 2 [ 0.290065] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.290186] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.290292] TCP: Hash tables configured (established 4096 bind 4096) [ 0.290406] TCP: reno registered [ 0.290430] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.290462] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.290850] NET: Registered protocol family 1 [ 0.291454] Unpacking initramfs... [ 0.291478] Initramfs unpacking failed: junk in compressed archive [ 0.299505] Freeing initrd memory: 4396K (c1000000 - c144b000) [ 0.299662] NetWinder Floating Point Emulator V0.97 (extended precision) [ 0.299811] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.302003] audit: initializing netlink socket (disabled) [ 0.302080] type=2000 audit(0.290:1): initialized [ 0.552093] zbud: loaded [ 0.552374] VFS: Disk quotas dquot_6.5.2 [ 0.552593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.553250] msgmni has been set to 990 [ 0.554953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.555168] io scheduler noop registered [ 0.555185] io scheduler deadline registered [ 0.555219] io scheduler cfq registered (default) [ 0.556152] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.558467] Error: Driver 'acx565akm' is already registered, aborting... [ 0.559609] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 0.570286] Serial: IMX driver [ 0.571190] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.234133] console [ttyO0] enabled [ 1.239142] Non-volatile memory driver v1.3 [ 1.243764] [drm] Initialized drm 1.1.0 20060810 [ 1.250499] mousedev: PS/2 mouse device common for all mice [ 1.261600] cpuidle: using governor ladder [ 1.266008] cpuidle: using governor menu [ 1.270268] ledtrig-cpu: registered to indicate activity on CPUs [ 1.276744] hidraw: raw HID events driver (C) Jiri Kosina [ 1.284586] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.291572] [drm] No driver support for vblank timestamp query. [ 1.297881] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 1.305422] TCP: cubic registered [ 1.309011] NET: Registered protocol family 10 [ 1.314944] Key type dns_resolver registered [ 1.319600] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 1.327765] SmartReflex Class3 initialized [ 1.332997] registered taskstats version 1 [ 1.337745] platform omapdrm.0: Driver omapdrm requests probe deferral [ 1.344737] Error: Driver 'tfp410' is already registered, aborting... [ 1.351806] slave hdmi.6: could not get i2c [ 1.356309] platform hdmi.6: Driver slave requests probe deferral [ 1.363043] platform 4830e000.lcdc: Driver tilcdc requests probe deferral [ 1.371774] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.379127] platform omapdrm.0: Driver omapdrm requests probe deferral [ 1.389137] tilcdc 4830e000.lcdc: no encoders/connectors found [ 1.395403] tilcdc 4830e000.lcdc: failed to initialize mode setting [ 1.403172] platform omapdrm.0: Driver omapdrm requests probe deferral [ 1.410204] /home/abuild/rpmbuild/BUILD/kernel-default-3.11.10/linux-3.11/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.422527] sr_init: No PMIC hook to init smartreflex [ 1.428086] sr_init: platform driver register failed for SR [ 1.434024] imx-drm imx-drm: No connectors reported connected with modes [ 1.441093] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.461926] Console: switching to colour frame buffer device 128x48 [ 1.477292] imx-drm imx-drm: fb0: frame buffer device [ 1.482712] imx-drm imx-drm: registered panic notifier [ 1.489295] md: Waiting for all devices to be available before autodetect [ 1.496526] md: If you don't use raid, use raid=noautodetect [ 1.503834] md: Autodetecting RAID arrays. [ 1.508165] md: Scanned 0 and added 0 devices. [ 1.512845] md: autorun ... [ 1.515822] md: ... autorun DONE. [ 1.519604] VFS: Cannot open root device "disk/by-id/mmc-SD32G_0x0169c961-part2" or unknown-block(0,0): error -6 [ 1.530369] Please append a correct "root=" boot option; here are the available partitions: [ 1.539203] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.547924] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.10-102-default #1 [ 1.555404] [<c0021368>] (unwind_backtrace+0x0/0x134) from [<c001cf48>] (show_stack+0x10/0x14) [ 1.564508] [<c001cf48>] (show_stack+0x10/0x14) from [<c0565254>] (dump_stack+0x80/0x90) [ 1.573051] [<c0565254>] (dump_stack+0x80/0x90) from [<c0561940>] (panic+0xa4/0x1f8) [ 1.581232] [<c0561940>] (panic+0xa4/0x1f8) from [<c080f0bc>] (mount_block_root+0x240/0x2c8) [ 1.590138] [<c080f0bc>] (mount_block_root+0x240/0x2c8) from [<c080f304>] (prepare_namespace+0x15c/0x1a4) [ 1.600232] [<c080f304>] (prepare_namespace+0x15c/0x1a4) from [<c080ed60>] (kernel_init_freeable+0x258/0x268) [ 1.610691] [<c080ed60>] (kernel_init_freeable+0x258/0x268) from [<c055fe28>] (kernel_init+0x14/0x160) [ 1.620509] [<c055fe28>] (kernel_init+0x14/0x160) from [<c00190e8>] (ret_from_fork+0x14/0x2c) [ 1.629501] drm_kms_helper: panic occurred, switching back to text console -------------------------------------------------------------------------
This is the point where it locks up.
Gary
On Mon, 20 Oct 2014 12:56:54 +0400 "Matwey V. Kornilov" <matwey.kornilov@gmail.com> wrote:
2014-10-19 20:15 GMT+04:00 <lists@lazygranch.com>:
It looks like you got auto corrected.
In my case, I entered reboot and it just sat there. So are saying I should enter systemctl reboot ?
Please, use the following for the reference: http://www.freedesktop.org/software/systemd/man/systemctl.html
I'm not trying to be argumentative. I just want to know exactly what to test before I reload the OS.
Original Message From: Matwey V. Kornilov Sent: Sunday, October 19, 2014 4:45 AM To: lists@lazygranch.com Subject: Re: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
systemctl reboot does the things
2014-10-18 23:57 GMT+04:00 <lists@lazygranch.com>:
Are you issuing the reboot command?
In my case it never rebooted.
Original Message From: Matwey V. Kornilov Sent: Saturday, October 18, 2014 11:05 AM To: lists@lazygranch.com; opensuse-arm Subject: Re: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
You said that the system did not boot. So I checked. It boots for me. There is difference between the first and the sequential boots, so I checked that it was able to reboot successfully.
HDMI is not related here.
2014-10-18 20:51 GMT+04:00 <lists@lazygranch.com>:
I wrote over the SDHC with a different disty, though I can load opensuse again. But before I do that, I want to be clear what I'm supposed to document.
First I presume this is just with the image, that is, don't upgrade.
So the idea is if I boot twice, the HDMI returns?
So the plan is to load the image, use the ncurses installer, and save whatever is dumped via the serial port while it boots. Then do I use the reboot command? Or do I hit the reset button. Assuming it boots, I then save the serial port dump.
Sorry for the top post, but I'm on a smartphone.
Original Message From: Matwey V. Kornilov Sent: Saturday, October 18, 2014 2:53 AM To: opensuse-arm@opensuse.org Subject: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
Hi
openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw
second-boots fine, just checked. Could you show full log of the first boot?
14.10.2014 05:17, lists пишет: > On Mon, 13 Oct 2014 01:19:16 -0700 > lists <lists@lazygranch.com> wrote: > >> The title says it all. No HDMI on this specific build. >> openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz >> >> Otherwise, it boots/runs. I'm going to flog it a bit more. > > This image seems to have other problems. I used zypper update, > then issued the reboot command. The display on the serial port > got to "starting kernel" and just froze there. > > I did a reboot by hand (i.e. hold the boot button and apply > power). --------------------------------------------- > U-Boot 2013.04 (Mar 17 2014 - 15:34:07) > > I2C: ready > DRAM: 512 MiB > WARNING: Caches not enamusb-hdrc: ConfigData=0xde (UTMI-8, dyn > FIFOs, HB-ISO Rx, HB-ISO Tx, SDRC RTL version 2.0 musb-hdrc: > setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Peripheral mode controller at 47401000 using PIO, IRQ 0 > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO > Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Host mode contnot set. Validating first E-fuse MAC > cpsw, usb_ether > Hit any key to stop autoboot: 0 > mmc0 is current device > SD/MMC found on device 0 > 1950 bytes read in 6 ms (317.4 KiB/s) > Running bootscript from mmc0 ... > ## Executing script at 80200000 > kerneladdr=0x802000004504224 bytes read in 609 ms (7.1 MiB/s) > ** File not found initrd ** > 21959 bytes read in 24 ms (892.6 KiB/s) > ## Flattened Device Tree Tree in pla885c6 > > Starting kernel ... > > ------------------------------ > Again, nothing happens. To be sure, I went to the HDMI port, > just to see if the display got transferred there, and again, > nothing. > > At this point, I'm going to halt testing and wait until someone > thinks there is an image with HDMI support. >
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru
-- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru
-- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru
-- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org