Am Dienstag 28 August 2007 schrieb Martin Møller:
Okay.. These are my results:
I was wrong about 2.6.5 -- It also says port 2 is bad, as does 2.6.4 and 2.6.12 and every other 2.6.x kernel that loads ehci-hcd. For all the 2.6 kernels, the load was at 1 or higher with ehci-hcd loaded and nothing going on... I tried: SuSE Linux 9.1, SLES9 SP1, Knoppix 4
You have khubd running non stop.
However, both 2.4.21 and 2.4.27 kernel work fine (but cannot see my harddisks, save the USB one, for lack of SATA support) Mounted one USB partition with the 2.4.27 kernel from GamesKnoppix I and wrote the attached files to the USB disk.
Can you bisect through 2.5 ?
2.4 distros: GamesKnoppix I, UnitedLinux SP3.
So I guess that means that SuSE Linux 9.0 was the last time I had functional USB 2.0 speed without workarounds... How time flies...
Something must have changed dramatically going to 2.6 for the ehci-hcd driver...
There's no indication the change must have been dramatic to cause this. Are you using a VIA chipset? Regards Oliver -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org