Am 07.07.2016 um 10:15 schrieb Matwey V. Kornilov:
05.07.2016 20:25, Andreas Färber пишет:
Am 22.06.2016 um 19:22 schrieb Matwey V. Kornilov:
diff --git a/config/armv7hl/default b/config/armv7hl/default index 3843c60..c42ecc0 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default [...] @@ -7234,13 +7300,15 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=m CONFIG_DEVFREQ_GOV_POWERSAVE=m CONFIG_DEVFREQ_GOV_USERSPACE=m +CONFIG_DEVFREQ_GOV_PASSIVE=m
# # DEVFREQ Drivers # -CONFIG_ARM_EXYNOS5_BUS_DEVFREQ=y +# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_PM_DEVFREQ_EVENT=y +# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
Any reason to disable these two in both default and lpae?
Hm, no reason.
Fixed.
If not, I'd like to change this to not "regress".
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y CONFIG_EXTCON=m
@@ -5210,6 +5252,7 @@ CONFIG_DRM_TILCDC_SLAVE_COMPAT=y CONFIG_DRM_VIRTIO_GPU=m CONFIG_DRM_MSM=m # CONFIG_DRM_MSM_REGISTER_LOGGING is not set +# CONFIG_DRM_MSM_HDMI_HDCP is not set
We may want to turn this on in a follow-up?
=y
CONFIG_DRM_MSM_DSI=y CONFIG_DRM_MSM_DSI_PLL=y CONFIG_DRM_MSM_DSI_28NM_PHY=y @@ -5236,12 +5279,16 @@ CONFIG_DRM_BRIDGE=y # # Display Interface Bridges # +# CONFIG_DRM_ANALOGIX_ANX78XX is not set
Ditto here.
=m
Done.
CONFIG_DRM_DW_HDMI=m CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m +CONFIG_DRM_ANALOGIX_DP=m # CONFIG_DRM_STI is not set # CONFIG_DRM_ETNAVIV is not set +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_MEDIATEK=m
# # Frame buffer Devices @@ -5539,6 +5586,7 @@ CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y # CONFIG_SND_SOC_AMD_ACP is not set CONFIG_SND_ATMEL_SOC=m CONFIG_SND_EDMA_SOC=m +# CONFIG_SND_DAVINCI_SOC_I2S is not set
Ditto
I think =m won't hurt, though I can't understand what its purpose is :)
It looks like that option unlike the below DAVINCI is for DA850 only, which appears to be ARM9, so your choice was correct.
CONFIG_SND_DAVINCI_SOC_MCASP=m CONFIG_SND_DESIGNWARE_I2S=m
@@ -5675,6 +5723,7 @@ CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_TAS2552=m CONFIG_SND_SOC_TAS5086=m CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SOC_TAS5720=m CONFIG_SND_SOC_TFA9879=m CONFIG_SND_SOC_TLV320AIC23=m CONFIG_SND_SOC_TLV320AIC23_I2C=m @@ -5700,6 +5749,7 @@ CONFIG_SND_SOC_WM8804=m CONFIG_SND_SOC_WM8804_I2C=m CONFIG_SND_SOC_WM8804_SPI=m CONFIG_SND_SOC_WM8903=m +# CONFIG_SND_SOC_WM8960 is not set
Ditto
I think that this really should be =m if possible.
Done.
CONFIG_SND_SOC_WM8962=m CONFIG_SND_SOC_WM8974=m CONFIG_SND_SOC_WM8978=m
@@ -6287,6 +6342,7 @@ CONFIG_LEDS_SYSCON=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m +# CONFIG_LEDS_TRIGGER_MTD is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_CPU=y @@ -6298,6 +6354,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set
I'll follow up with enabling all triggers for consistency.
# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y @@ -6369,8 +6426,6 @@ CONFIG_RTC_DRV_FM3130=y CONFIG_RTC_DRV_RX8581=y CONFIG_RTC_DRV_RX8025=y CONFIG_RTC_DRV_EM3027=y -CONFIG_RTC_DRV_RV3029C2=y -CONFIG_RTC_DRV_RV3029_HWMON=y CONFIG_RTC_DRV_RV8803=y CONFIG_RTC_DRV_S5M=y
@@ -6379,6 +6434,7 @@ CONFIG_RTC_DRV_S5M=y # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set +CONFIG_RTC_DRV_DS1302=m
Usually we chose =y for RTC drivers. Change or leave?
Some of them =m, for instance CONFIG_RTC_DRV_RX8010=m So probably all of them should be =y.
Unchanged.
# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set @@ -6397,6 +6453,8 @@ CONFIG_RTC_I2C_AND_SPI=y # CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_PCF2127=y +CONFIG_RTC_DRV_RV3029C2=y +CONFIG_RTC_DRV_RV3029_HWMON=y
# # Platform RTC drivers
Queued armv7hl and updating armv6hl now. Thanks for your help, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org