http://bugzilla.opensuse.org/show_bug.cgi?id=1193970 Bug ID: 1193970 Summary: SD7.0 Express Card + JMS581LT Card Reader 152d:0581 stuck in UHS-I mode and not upgraded to NVME mode Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs@opensuse.org Reporter: ich@schugy.de QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- The Blueendless SD05 card reader should support M.2 SATA SSDs, M.2 NVME SSDs and also SD7.1 Express cards. When a SD Express Card is inserted only the much slower UHS-I interface is being used (only 1/10th of the expected speed). The second row of pins needed for the SD Express standard is visible in the card slot and on the back of the card. Given the omnipresence of SD cards they should be used to their full potential. The card is an ADATA Premier Extreme SD7.0 Express card (ASD256GEX3L1-C / GTIN 4711085935717). Some SD Express code is already in the kernel: https://patchwork.kernel.org/project/linux-mmc/patch/1603353768-3298-1-git-s... uname -r 5.15.7-1-default dmesg usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 7 using xhci_hcd usb 2-1: New USB device found, idVendor=152d, idProduct=0581, bcdDevice=11.04 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: USB to ATA/ATAPI Bridge usb 2-1: Manufacturer: JMicron usb 2-1: SerialNumber: 0123456789ABCDEF scsi host1: uas scsi 1:0:0:0: Direct-Access JMicron Generic SD70 1104 PQ: 0 ANSI: 6 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 493895680 512-byte logical blocks: (253 GB/236 GiB) sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 53 00 00 08 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk lsusb -vvd 152d:0581 Bus 002 Device 007: ID 152d:0581 JMicron Technology Corp. / JMicron USA Technology Corp. USB to ATA/ATAPI Bridge Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp. idProduct 0x0581 bcdDevice 11.04 iManufacturer 1 JMicron iProduct 2 USB to ATA/ATAPI Bridge iSerial 3 0123456789ABCDEF bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0079 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 98 iInterface 10 MSC USB Attached SCSI Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Command pipe (0x01) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 MaxStreams 32 Status pipe (0x02) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-in pipe (0x03) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-out pipe (0x04) Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000f0e BESL Link Power Management (LPM) Supported BESL value 3840 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 32 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1100 bmSublinkSpeedAttr[0] 0x000a4030 Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[1] 0x000a40b0 Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0001 Self Powered And just in case the root hub: lsusb -vv -d 1d6b:0003 Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 5.15 iManufacturer 3 Linux 5.15.7-1-default xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.4 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 1 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 lowspeed L1 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x0023 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x02 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1104 bmSublinkSpeedAttr[0] 0x00050034 Speed Attribute ID: 4 5Gb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[1] 0x000500b4 Speed Attribute ID: 4 5Gb/s Symmetric TX SuperSpeed can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 5.15 iManufacturer 3 Linux 5.15.7-1-default xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.0203 lowspeed enable connect Port 2: 0000.02a0 lowspeed L1 Port 3: 0000.02a0 lowspeed L1 Port 4: 0000.02a0 lowspeed L1 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002b bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x02 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds SuperSpeedPlus USB Device Capability: bLength 28 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000023 Sublink Speed Attribute count 3 Sublink Speed ID count 1 wFunctionalitySupport 0x1104 bmSublinkSpeedAttr[0] 0x00050034 Speed Attribute ID: 4 5Gb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[1] 0x000500b4 Speed Attribute ID: 4 5Gb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[2] 0x000a4035 Speed Attribute ID: 5 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[3] 0x000a40b5 Speed Attribute ID: 5 10Gb/s Symmetric TX SuperSpeedPlus can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0001 Self Powered -- You are receiving this mail because: You are the assignee for the bug.