[Bug 1201013] New: intel_pstate: cpu frequency is always above maximum
http://bugzilla.opensuse.org/show_bug.cgi?id=1201013 Bug ID: 1201013 Summary: intel_pstate: cpu frequency is always above maximum Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs@opensuse.org Reporter: aturan.work@gmail.com QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- With intel_pstate driver, the cpu frequency never goes under maximum frequency but may go under turbo frequency so it is in range 2.80GHz - 3.40GHz. Intel�� Core��� i5-4200H CPU @ 2.80GHz with no kernel parameters: $ cpupower frequency-info analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: Cannot determine or is not supported. hardware limits: 800 MHz - 3.40 GHz available cpufreq governors: performance powersave current policy: frequency should be within 800 MHz and 3.40 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency: Unable to call hardware current CPU frequency: 3.21 GHz (asserted by call to kernel) boost state support: Supported: yes Active: yes $ grep MHz /proc/cpuinfo cpu MHz : 2793.606 cpu MHz : 3058.532 cpu MHz : 2793.606 cpu MHz : 2793.606 with intel_pstate=disable: $ cpupower frequency-info analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us hardware limits: 800 MHz - 2.80 GHz available frequency steps: 2.80 GHz, 2.80 GHz, 2.70 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.50 GHz, 1.40 GHz, 1.20 GHz, 1.10 GHz, 900 MHz, 800 MHz available cpufreq governors: ondemand performance schedutil current policy: frequency should be within 800 MHz and 2.80 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency: Unable to call hardware current CPU frequency: 1.03 GHz (asserted by call to kernel) boost state support: Supported: yes Active: yes $ grep MHz /proc/cpuinfo cpu MHz : 800.000 cpu MHz : 1073.813 cpu MHz : 1100.000 cpu MHz : 800.000 $ uname --kernel-release --kernel-version 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) -- You are receiving this mail because: You are the assignee for the bug.
participants (1)
-
bugzilla_noreply@suse.com