hi, ich hab die suse 7.3 mit einer teles-pci-karte. hab vbox installiert und konfiguriert. ohne irgendeine fehlermeldung (mal abgesehen von dem versuch, das der standard-suse-kernel 2.4.10 beim rechnerstart etwas von einem mißglückten versuch meldet via hisax noch eine netjet-karte oder so zu laden ) funzt auch der start. ruf ich mich nun selbst an, klingelt es auch brav .... KAM meldet auch, daß ein Anruf kommt. Nach dem eingestellten timeout von 3 rings "hebt" vbox auch ab - um auch gleich wieder aufzulegen oder so - das ergebnis ist zumindest, das eine weibliche telekomstimme meint "dieser anschluß ist zur zeit nicht erreichbar ..... ". so sieht das log des anrufs aus : 07-May 00:26:48 <I> -----------------------[Begin session]---------------------- 07-May 00:26:48 <I> Running vbox version 2.0.0BETA5... 07-May 00:26:48 <I> Tcl interpreter version 8.3... 07-May 00:26:48 <D> Found command 'debuglevel = FEWIDJ' (-global-)... 07-May 00:26:48 <D> Found command 'port = /dev/ttyI6'... 07-May 00:26:48 <D> Found command 'modeminit = ATZ&B512&E935190' (/dev/ttyI6)... 07-May 00:26:48 <D> Found command 'user = hanno' (/dev/ttyI6)... 07-May 00:26:48 <D> Found command 'group = users' (/dev/ttyI6)... 07-May 00:26:48 <D> Found command 'spooldir = /var/spool/vbox/hanno' (/dev/ttyI6)... 07-May 00:26:48 <I> User hanno's messagebox is "/var/spool/vbox/hanno"... 07-May 00:26:48 <I> User hanno's vbox.conf is "/var/spool/vbox/hanno/vbox.conf"... 07-May 00:26:48 <D> Setting "/var/spool/vbox/hanno" to 500.100 (0700)... 07-May 00:26:48 <D> Opening modem port "/dev/ttyI6"... 07-May 00:26:48 <D> Locking vboxgetty (/var/run/vboxgetty-ttyI6.pid)... 07-May 00:26:48 <D> Setting "/var/run/vboxgetty-ttyI6.pid" to 500.100 (0644)... 07-May 00:26:48 <D> Locking modem port (/var/lock/LCK..ttyI6)... 07-May 00:26:48 <D> Setting "/var/lock/LCK..ttyI6" to 500.100 (0644)... 07-May 00:26:48 <I> Drop permissions to userid 500; groupid 100... 07-May 00:26:48 <I> Initializing modem port (voice mode; 2500 ms)... 07-May 00:26:50 <D> Hangup modem (drop dtr 400 ms)... 07-May 00:26:50 <D> Flushing modem (timeout)... 07-May 00:26:51 <J> Setting modem speed to 57600... 07-May 00:26:51 <J> Setting modem flow control (HARD)... 07-May 00:26:51 <D> Flushing modem... 07-May 00:26:51 <D> Sending "ATZ&B512&E935190"... 07-May 00:26:51 <J> Reading modem echo (4 secs timeout)... 07-May 00:26:51 <J> Reading modem input (4 secs timeout)... 07-May 00:26:51 <D> Waiting for "OK"... Got it. 07-May 00:26:51 <D> Flushing modem... 07-May 00:26:51 <D> Sending "AT+FCLASS=8"... 07-May 00:26:51 <J> Reading modem echo (4 secs timeout)... 07-May 00:26:51 <J> Reading modem input (4 secs timeout)... 07-May 00:26:51 <D> Waiting for "OK|VCON"... Got "OK" (1). 07-May 00:26:51 <D> Flushing modem... 07-May 00:26:51 <D> Sending "ATS13.2=1S13.4=1"... 07-May 00:26:51 <J> Reading modem echo (4 secs timeout)... 07-May 00:26:51 <J> Reading modem input (4 secs timeout)... 07-May 00:26:51 <D> Waiting for "OK|VCON"... Got "OK" (1). 07-May 00:26:51 <D> Flushing modem... 07-May 00:26:51 <I> Waiting... 07-May 00:27:00 <I> Wakeup! 07-May 00:27:00 <D> Checking free space on "/var/spool/vbox/hanno"... 07-May 00:27:00 <J> -965267456 bytes available; 2000000 bytes needed... enough. 07-May 00:27:00 <D> Getting number of rings to wait before answer call... 07-May 00:27:00 <J> Jumping to section "[RINGS]"... 07-May 00:27:00 <D> Parsing time(s) "23:30-23:59,00:00-08:59"... 07-May 00:27:00 <D> Range 23:30:00 - 23:59:59 (00:27:00): don't match. 07-May 00:27:00 <D> Range 00:00:00 - 08:59:59 (00:27:00): match. 07-May 00:27:00 <D> Parsing day(s) "*"... 07-May 00:27:00 <D> Range *: match. 07-May 00:27:00 <D> Call will be answered after 1 rings... 07-May 00:27:00 <J> Reading modem input (2 secs timeout)... 07-May 00:27:00 <I> [ 1/ 1] RING... 07-May 00:27:00 <J> Reading modem input (2 secs timeout)... 07-May 00:27:00 <D> Flushing modem... 07-May 00:27:00 <D> Sending "ATS20?"... 07-May 00:27:00 <J> Reading modem echo (4 secs timeout)... 07-May 00:27:00 <J> Reading modem input (4 secs timeout)... 07-May 00:27:00 <D> Got s-register value "1". 07-May 00:27:00 <D> Searching user with caller number "0"... 07-May 00:27:00 <J> Jumping to section "[CALLERIDS]"... 07-May 00:27:00 <D> Caller number match user "*** Unknown ***"... 07-May 00:27:00 <D> Section "[STANDARD]" will be used... 07-May 00:27:00 <D> Parsing settings from section "[STANDARD]"... 07-May 00:27:00 <J> Jumping to section "[STANDARD]"... 07-May 00:27:00 <D> Parsing time(s) "20:15-22:14"... 07-May 00:27:00 <D> Range 20:15:00 - 22:14:59 (00:27:00): don't match. 07-May 00:27:00 <J> String contains no matching time! 07-May 00:27:00 <D> Parsing time(s) "*"... 07-May 00:27:00 <D> Range **:**:** - **:**:** (00:27:00): match. 07-May 00:27:00 <D> Parsing day(s) "*"... 07-May 00:27:00 <D> Range *: match. 07-May 00:27:00 <J> Found Flag "RINGS=6"... 07-May 00:27:00 <J> Found Flag "TOLLRINGS=4"... 07-May 00:27:00 <J> Settings: Message "/var/spool/vbox/hanno/messages/standard.msg". 07-May 00:27:00 <J> Settings: Beep "/var/spool/vbox/hanno/messages/beep.msg". 07-May 00:27:00 <J> Settings: Timeout "/var/spool/vbox/hanno/messages/timeout.msg". 07-May 00:27:00 <J> Settings: Script "/var/spool/vbox/hanno/standard.tcl". 07-May 00:27:00 <J> Settings: Rings changed to 6. 07-May 00:27:00 <J> Settings: Rings changed to 4 if new message exist. 07-May 00:27:00 <J> Settings: Check for new messages in "/var/spool/vbox/hanno/incoming". 07-May 00:27:00 <J> Settings: 90 secs record time. 07-May 00:27:00 <J> Settings: Answer call. 07-May 00:27:00 <J> Settings: Record a message. 07-May 00:27:00 <J> Settings: Play standard message. 07-May 00:27:00 <J> Settings: Play beep message. 07-May 00:27:00 <J> Settings: Play timeout message. 07-May 00:27:00 <I> [ 1/ 1] CALLER NUMBER: 0 (*** Unknown ***)... 07-May 00:27:00 <D> New number of rings from "vboxrc" are 6... 07-May 00:27:00 <D> Checking for new messages in "/var/spool/vbox/hanno/incoming"... 07-May 00:27:00 <J> Reading modem input (2 secs timeout)... 07-May 00:27:00 <I> [ 2/ 6] RING... 07-May 00:27:00 <J> Reading modem input (2 secs timeout)... 07-May 00:27:02 <J> Modem timeout function called... 07-May 00:27:02 <J> Can't read from modem [0] (timeout). 07-May 00:27:02 <I> Initializing modem port (voice mode; 2500 ms)... 07-May 00:27:05 <D> Hangup modem (drop dtr 400 ms)... 07-May 00:27:05 <D> Flushing modem (timeout)... 07-May 00:27:05 <J> Setting modem speed to 57600... 07-May 00:27:05 <J> Setting modem flow control (HARD)... 07-May 00:27:05 <D> Flushing modem... 07-May 00:27:05 <D> Sending "ATZ&B512&E935190"... 07-May 00:27:05 <J> Reading modem echo (4 secs timeout)... 07-May 00:27:05 <J> Reading modem input (4 secs timeout)... 07-May 00:27:05 <D> Waiting for "OK"... Got it. 07-May 00:27:05 <D> Flushing modem... 07-May 00:27:05 <D> Sending "AT+FCLASS=8"... 07-May 00:27:05 <J> Reading modem echo (4 secs timeout)... 07-May 00:27:05 <J> Reading modem input (4 secs timeout)... 07-May 00:27:05 <D> Waiting for "OK|VCON"... Got "OK" (1). 07-May 00:27:05 <D> Flushing modem... 07-May 00:27:05 <D> Sending "ATS13.2=1S13.4=1"... 07-May 00:27:05 <J> Reading modem echo (4 secs timeout)... 07-May 00:27:05 <J> Reading modem input (4 secs timeout)... 07-May 00:27:05 <D> Waiting for "OK|VCON"... Got "OK" (1). 07-May 00:27:05 <D> Flushing modem... 07-May 00:27:05 <I> Waiting... 07-May 00:27:22 <D> Blocking all signals (0-64)... 07-May 00:27:22 <I> Exit program on signal 2... 07-May 00:27:22 <D> Hangup modem (drop dtr 400 ms)... 07-May 00:27:22 <D> Flushing modem (timeout)... 07-May 00:27:23 <D> Closing modem port (4)... 07-May 00:27:23 <D> Unlocking vboxgetty (/var/run/vboxgetty-ttyI6.pid)... 07-May 00:27:23 <W> Can't remove lock "/var/run/vboxgetty-ttyI6.pid". 07-May 00:27:23 <D> Unlocking modem port (/var/lock/LCK..ttyI6)... 07-May 00:27:23 <I> ------------------------[End session]----------------------- bin ueber jeden hinweis sehr dankbar hanno