Modemeinwahl auf SuSE 8.0 DialIn Server
Hallo, habe einen DialIn Server auf Basis von SuSE 8.0, AVM C4 ISDN-Karte und der Manpage von capiplugin eingerichtet. Die Einwahl per eingebauten Analog-Modem meines Laptops funktioniert. Die Analogeinwahl eines Internet-Faxes der Firma Sagem bricht an einem bestimmten Zeitpunkt ab und legt auf. Die Logeinträge in /var/log/messages sind bis dahin gleich: siehe unten P.S. Die Einwahl des Faxes bei T-Online funktioniert und er holt per POP die Mails ab. Was macht T-Online dabei mehr? Kann mir jemand eine Erklärung geben, vor allem für die ersten 20 Logeinträge warum der pppd so viele Einträge produziert? Was bedeutet der Eintrag "ncci_change_state", bei dem das Modem weitermacht, das Fax aber auflegt. Einwahl per Modem Jan 31 13:10:51 MMSF-PGW isdnlog: Jan 31 13:10:51 * Call to tei 127 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen RING (3.1 kHz audio) Jan 31 13:10:51 MMSF-PGW pppd[1965]: plci_change_state:0x104 0 -> 4 event=5 Jan 31 13:10:51 MMSF-PGW pppd[1965]: incoming call contr=4 cip=4 421xxxx -> yyyy Jan 31 13:10:51 MMSF-PGW pppd[1965]: capiplugin: incoming call: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) (0x4) Jan 31 13:10:51 MMSF-PGW pppd[1965]: accept plci 0x0104 8,1,0 Jan 31 13:10:51 MMSF-PGW pppd[1965]: plci_change_state:0x104 4 -> 6 event=12 Jan 31 13:10:51 MMSF-PGW pppd[1965]: controller 4: listen_change_state 2 -> 3 Jan 31 13:10:51 MMSF-PGW pppd[1965]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 Jan 31 13:10:51 MMSF-PGW pppd[1965]: controller 4: listen_change_state 3 -> 0 Jan 31 13:10:51 MMSF-PGW isdnlog: Jan 31 13:10:51 Call to tei 71 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen CONNECT (3.1 kHz audio) Jan 31 13:10:51 MMSF-PGW pppd[1966]: plci_change_state:0x104 0 -> 4 event=5 Jan 31 13:10:51 MMSF-PGW pppd[1966]: incoming call contr=4 cip=4 421xxxx -> yyyy Jan 31 13:10:51 MMSF-PGW pppd[1966]: capiplugin: incoming call: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) (0x4) Jan 31 13:10:51 MMSF-PGW pppd[1966]: accept plci 0x0104 8,1,0 Jan 31 13:10:51 MMSF-PGW pppd[1966]: plci_change_state:0x104 4 -> 6 event=12 Jan 31 13:10:51 MMSF-PGW pppd[1966]: controller 4: listen_change_state 2 -> 3 Jan 31 13:10:51 MMSF-PGW pppd[1966]: DISCONNECT_IND reason 0x3304 (Another application got that call) for plci 0x104 Jan 31 13:10:51 MMSF-PGW pppd[1966]: plci_change_state:0x104 6 -> 8 event=9 Jan 31 13:10:51 MMSF-PGW pppd[1966]: plci_change_state:0x104 8 -> 0 event=11 Jan 31 13:10:51 MMSF-PGW pppd[1966]: capiplugin: disconnect(remote): "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) 0x3304 (0x0000) - Another application got that call Jan 31 13:10:51 MMSF-PGW pppd[1966]: controller 4: listen_change_state state=3 event=1 ???? Jan 31 13:10:51 MMSF-PGW pppd[1966]: capiplugin: waiting for incoming call ... Jan 31 13:10:51 MMSF-PGW pppd[1966]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x4010032 capimask2=0x0 Jan 31 13:10:51 MMSF-PGW pppd[1966]: controller 4: listen_change_state 3 -> 2 Jan 31 13:10:51 MMSF-PGW pppd[1966]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x4010032 capimask2=0x0 Jan 31 13:10:51 MMSF-PGW pppd[1966]: controller 4: listen_change_state state=2 event=4 ???? Jan 31 13:10:51 MMSF-PGW kernel: capidrv-4: incoming call 421xxxx,1,2,yyyy Jan 31 13:10:51 MMSF-PGW kernel: capidrv-4: patching si2=2 to 0 for VBOX Jan 31 13:10:51 MMSF-PGW kernel: isdn_tty: call from 421xxxx -> yyyy ignored Jan 31 13:10:51 MMSF-PGW kernel: capidrv-4: incoming call 421xxxx,1,0,yyyy ignored Jan 31 13:10:51 MMSF-PGW pppd[1965]: plci_change_state:0x104 6 -> 3 event=6 Jan 31 13:11:03 MMSF-PGW pppd[1965]: ncci_change_state:0x10104 0 -> 2 event=2 <------ hier bricht das Fax ab und legt auf, siehe unten 13:04:37 Jan 31 13:11:03 MMSF-PGW pppd[1965]: ncci_change_state:0x10104 2 -> 3 event=6 Jan 31 13:11:03 MMSF-PGW kernel: kcapi: appl 3 ncci 0x10104 up Jan 31 13:11:03 MMSF-PGW pppd[1965]: ncci_change_state:0x10104 3 -> 4 event=7 Jan 31 13:11:03 MMSF-PGW pppd[1965]: ncci 0x10104 up Jan 31 13:11:03 MMSF-PGW pppd[1965]: capiplugin: connected: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x10104) Jan 31 13:11:03 MMSF-PGW pppd[1965]: capiplugin: using /dev/capi/0: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x10104) Jan 31 13:11:04 MMSF-PGW pppd[1965]: using channel 3 Jan 31 13:11:04 MMSF-PGW pppd[1965]: Using interface ppp0 Jan 31 13:11:04 MMSF-PGW pppd[1965]: Connect: ppp0 <--> /dev/capi/0 Jan 31 13:11:04 MMSF-PGW pppd[1965]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x34748720> <pcomp> <accomp>] Jan 31 13:11:04 MMSF-PGW pppd[1965]: capiplugin: phase establish (was serialconn). Jan 31 13:11:06 MMSF-PGW pppd[1965]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x34748720> <pcomp> <accomp>] Jan 31 13:11:07 MMSF-PGW pppd[1965]: rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <magic 0x59e830c1> <pcomp> <accomp> <callback CBCP> <mrru 1614> <endpoint [local:03.ea.25.27.6a.a0.41.fb.9c.82.e4.14.fd.4b.f0.65.00.00.00.00]>] Jan 31 13:11:07 MMSF-PGW pppd[1965]: sent [LCP ConfRej id=0x0 <mrru 1614>] Jan 31 13:11:07 MMSF-PGW pppd[1965]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x59e830c1> <pcomp> <accomp> <callback CBCP> <endpoint [local:03.ea.25.27.6a.a0.41.fb.9c.82.e4.14.fd.4b.f0.65.00.00.00.00]>] Jan 31 13:11:07 MMSF-PGW pppd[1965]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x59e830c1> <pcomp> <accomp> <callback CBCP> <endpoint [local:03.ea.25.27.6a.a0.41.fb.9c.82.e4.14.fd.4b.f0.65.00.00.00.00]>] Jan 31 13:11:08 MMSF-PGW pppd[1965]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x34748720> <pcomp> <accomp>] Jan 31 13:11:08 MMSF-PGW pppd[1965]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0x34748720> <pcomp> <accomp>] Jan 31 13:11:08 MMSF-PGW pppd[1965]: sent [LCP EchoReq id=0x0 magic=0x34748720] Jan 31 13:11:08 MMSF-PGW pppd[1965]: cbcp_lowerup Jan 31 13:11:08 MMSF-PGW pppd[1965]: want: 2 Einwahl per Internetfax: Jan 31 13:04:26 MMSF-PGW isdnlog: Jan 31 13:04:26 Call to tei 127 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen HANGUP (Timeout) Jan 31 13:04:26 MMSF-PGW isdnlog: Jan 31 13:04:26 * Call to tei 127 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen RING (3.1 kHz audio) Jan 31 13:04:26 MMSF-PGW pppd[1958]: plci_change_state:0x104 0 -> 4 event=5 Jan 31 13:04:26 MMSF-PGW pppd[1958]: incoming call contr=4 cip=4 421xxxx -> yyyy Jan 31 13:04:26 MMSF-PGW pppd[1958]: capiplugin: incoming call: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) (0x4) Jan 31 13:04:26 MMSF-PGW pppd[1958]: accept plci 0x0104 8,1,0 Jan 31 13:04:26 MMSF-PGW pppd[1958]: plci_change_state:0x104 4 -> 6 event=12 Jan 31 13:04:26 MMSF-PGW pppd[1958]: controller 4: listen_change_state 2 -> 3 Jan 31 13:04:26 MMSF-PGW pppd[1958]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 Jan 31 13:04:26 MMSF-PGW pppd[1958]: controller 4: listen_change_state 3 -> 0 Jan 31 13:04:26 MMSF-PGW isdnlog: Jan 31 13:04:26 Call to tei 70 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen CONNECT (3.1 kHz audio) Jan 31 13:04:26 MMSF-PGW pppd[1959]: plci_change_state:0x104 0 -> 4 event=5 Jan 31 13:04:26 MMSF-PGW pppd[1959]: incoming call contr=4 cip=4 421xxxx -> yyyy Jan 31 13:04:26 MMSF-PGW pppd[1959]: capiplugin: incoming call: "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) (0x4) Jan 31 13:04:26 MMSF-PGW pppd[1959]: accept plci 0x0104 8,1,0 Jan 31 13:04:26 MMSF-PGW pppd[1959]: plci_change_state:0x104 4 -> 6 event=12 Jan 31 13:04:26 MMSF-PGW pppd[1959]: controller 4: listen_change_state 2 -> 3 Jan 31 13:04:26 MMSF-PGW pppd[1959]: DISCONNECT_IND reason 0x3304 (Another application got that call) for plci 0x104 Jan 31 13:04:26 MMSF-PGW pppd[1959]: plci_change_state:0x104 6 -> 8 event=9 Jan 31 13:04:26 MMSF-PGW pppd[1959]: plci_change_state:0x104 8 -> 0 event=11 Jan 31 13:04:26 MMSF-PGW pppd[1959]: capiplugin: disconnect(remote): "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) 0x3304 (0x0000) - Another application got that call Jan 31 13:04:26 MMSF-PGW pppd[1959]: controller 4: listen_change_state state=3 event=1 ???? Jan 31 13:04:26 MMSF-PGW pppd[1959]: capiplugin: waiting for incoming call ... Jan 31 13:04:26 MMSF-PGW pppd[1959]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x4010032 capimask2=0x0 Jan 31 13:04:26 MMSF-PGW pppd[1959]: controller 4: listen_change_state 3 -> 2 Jan 31 13:04:26 MMSF-PGW pppd[1959]: contr 4: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x4010032 capimask2=0x0 Jan 31 13:04:26 MMSF-PGW pppd[1959]: controller 4: listen_change_state state=2 event=4 ???? Jan 31 13:04:26 MMSF-PGW kernel: capidrv-4: incoming call 421xxxx,1,2,yyyy Jan 31 13:04:26 MMSF-PGW kernel: capidrv-4: patching si2=2 to 0 for VBOX Jan 31 13:04:26 MMSF-PGW kernel: isdn_tty: call from 421xxxx -> yyyy ignored Jan 31 13:04:26 MMSF-PGW kernel: capidrv-4: incoming call 421xxxx,1,0,yyyy ignored Jan 31 13:04:26 MMSF-PGW pppd[1958]: plci_change_state:0x104 6 -> 3 event=6 Jan 31 13:04:37 MMSF-PGW isdnlog: Jan 31 13:04:37 Call to tei 70 from +49 421/xxxx, Bremen on +49 421/yyyy, Bremen HANGUP ( 0:00:11) Jan 31 13:04:37 MMSF-PGW pppd[1958]: DISCONNECT_IND reason 0x3490 (Normal call clearing) for plci 0x104 Jan 31 13:04:37 MMSF-PGW pppd[1958]: plci_change_state:0x104 3 -> 8 event=9 Jan 31 13:04:37 MMSF-PGW pppd[1958]: plci_change_state:0x104 8 -> 0 event=11 Jan 31 13:04:37 MMSF-PGW pppd[1958]: capiplugin: disconnect(remote): "421xxxx" -> "yyyy" incoming (pcli=0x104/ncci=0x0) 0x3490 (0x0000) - Normal call clearing Gruß Sönke Meyer
participants (1)
-
Meyer, Soenke