Bis Suse 9.0 war meine Linuxwelt noch in Ordnung, aber leider war unter 9.1 keine Unterstützung möglich. Nun las ich in der Hardwaredatenbank, dass die Anlage nun wieder unterstützt wird. Aber leider kann keine Anwahl durchgeführt werden. Die Anlage wird am USB-Port erkannt. Bei isdnctrl addit ippp0 kommt die Meldung Can't open isdnctrl: no such device Vielleicht kann mir jemand weiterhelfen. ;-) Hier die wichtigen Auszüge aus boot.msg Inspecting /boot/System.map-2.6.8-24-smp Loaded 24419 symbols from /boot/System.map-2.6.8-24-smp. Symbols match kernel version 2.6.8. No module symbols loaded - kernel modules not enabled. ... ... ... <6>usb 1-3: Product: COMpact_2104_USB <6>usb 1-3: Manufacturer: AUERSWALD GmbH & CO. KG <6>usb 1-3: SerialNumber: 807 <6>usb 2-2: new full speed USB device using address 2 <6>usb 2-2: Product: hp scanjet 3500c series <6>usb 2-2: Manufacturer: Hewlett-Packard <6>usb 2-2: SerialNumber: SCN2BUN81K71P <6>usb 2-3: new full speed USB device using address 3 <6>usb 2-3: Product: DeskJet 930C <6>usb 2-3: Manufacturer: Hewlett-Packard ... ... ... <6>usb 2-2: new full speed USB device using address 5 <6>usb 2-2: Product: hp scanjet 3500c series <6>usb 2-2: Manufacturer: Hewlett-Packard <6>usb 2-2: SerialNumber: SCN2BUN81K71P <6>usb 2-3: new full speed USB device using address 6 <6>usb 2-3: Product: DeskJet 930C <6>usb 2-3: Manufacturer: Hewlett-Packard <6>usb 2-3: SerialNumber: ES06F1D1S8JJ <6>usb 1-3: new full speed USB device using address 3 <6>usb 1-3: Product: COMpact_2104_USB <6>usb 1-3: Manufacturer: AUERSWALD GmbH & CO. KG <6>usb 1-3: SerialNumber: 807 <5>ReiserFS: hdb2: using ordered data mode <5>ReiserFS: hdb2: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hdb2: checking transaction log (hdb2) <5>ReiserFS: hdb2: Using r5 hash to sort names <6>NTFS driver 2.1.17 [Flags: R/O MODULE]. <6>NTFS volume version 3.1. <6>NTFS volume version 3.1. <6>subfs 0.9 <6>drivers/usb/misc/auerswald.c: device is a COMpact_2104_USB,Ser# 807, MSN5089720 <6>usbcore: registered new driver auerswald <6>CSLIP: code copyright 1989 Regents of the University of California <5>ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded <6>HiSax: Linux Driver for passive ISDN cards <6>HiSax: Version 3.5 (module) <6>HiSax: Layer1 Revision 2.46.2.5 <6>HiSax: Layer2 Revision 2.30.2.4 <6>HiSax: TeiMgr Revision 2.20.2.3 <6>HiSax: Layer3 Revision 2.22.2.3 <6>HiSax: LinkLayer Revision 2.59.2.4 <6>Initializing USB Mass Storage driver... ... ... ... Boot logging started on /dev/tty1(/dev/console) at Thu Jan 20 16:29:52 2005 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn SuSEfirewall2_init) Initializing random number generatordone Setting up ISDN card contr0 Auerswald COMpact 2104 USBskipped Starting Firewall Initialization (phase 1 of 3) done <notice>exit status of (random isdn SuSEfirewall2_init) is (0 5 0) <notice>start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) eth0 No configuration found for eth0unused ippp0 error in /usr/sbin/isdnctrl addif ippp0failed Setting up service network . . . . . . . . . . . . . . . .done <notice>exit status of (network) is (0) siga -isdn: 3.2 isdn_cfg /etc/sysconfig/isdn/cfg-contr0 AREACODE="+49 2066" DIALPREFIX="" DRIVER="auerswald" ISDNLOG_START="yes" NAME="Auerswald COMpact 2104 USB" PARA_SUBTYPE="2" PARA_TYPE="42" PROTOCOL="euro" STARTMODE="hotplug" UNIQUE="2UT6.54mZJRpzEi6" ------------------------------------------------------------------------------- 3.3 isdn net config /etc/sysconfig/isdn/cfg-net0 CHARGEHUP="on" DEFAULTROUTE="yes" DYNAMICIP="yes" FIREWALL="yes" IPADDR="" MSN="meine MSN" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="tonline" PTPADDR="" STARTMODE="onboot" USERCONTROL="yes" ... ... ... 3.5 smpppd.conf - /etc/smpppd.conf stop-on-disconnect = notdemand open-inet-socket = no number-of-loglines = 250 ------------------------------------------------------------------------------- 3.6 isdn_ctrl - /usr/sbin/isdnctrl list all Can't open /dev/isdnctrl or /dev/isdn/isdnctrl: No such device ------------------------------------------------------------------------------- 3.7 isdn_capi - /etc/sysconfig/isdn/capi.conf.contr0 file /etc/sysconfig/isdn/capi.conf.contr0 not found -- 10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail +++ GMX - die erste Adresse für Mail, Message, More +++