![](https://seccdn.libravatar.org/avatar/2aead830a01ecd8af5c0a7577cc6cdad.jpg?s=120&d=mm&r=g)
Hallo, wahrscheinlich schon oft gefragt und noch mehr geantwortet. Trotzdem. Direkt nach, b.z.w waehrend des bootens wird (versucht ??) eine Verbindung aufzubauen. Wer macht das ???? Ein Auszug aus "dmesg" ---- HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Teles IO driver Rev. 2.12 HiSax: Teles 16.3 config irq:12 isac:0x980 cfg:0xD80 HiSax: hscx A:0x180 hscx B:0x580 Teles3: ISAC version (0): 2086/2186 V1.1 Teles3: HSCX version A: V2.1 B: V2.1 Teles 16.3: IRQ 12 count 0 Teles 16.3: IRQ 12 count 3 HiSax: DSS1 Rev. 2.14 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: debugging flags card 1 set to 4 ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocating reset data structure ippp0: dialing 1 0191011... <---- das ist die TELEKOM isdn_net: ippp0 connected isdn_net: chargetime of ippp0 now 5885 isdn_net: local hangup ippp0 ippp0: Chargesum is 0 ippp, open, slot: 1, minor: 0, state: 0000 ippp_ccp: allocating reset data structure ippp0: dialing 1 0191011... isdn_net: ippp0 connected isdn_net: chargetime of ippp0 now 21420 parport0: PC-style at 0x378 [SPP,EPP] parport0: Printer, Canon BJC-250 ppa: Version 2.03 (for Linux 2.2.x) ... ... isdn_net: local hangup ippp0 ippp0: Chargesum is 0 ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocating reset data structure ------ Danke im voraus Peter
![](https://seccdn.libravatar.org/avatar/5301d22cbbdb51117ece83b32dd3a328.jpg?s=120&d=mm&r=g)
On Thu, Nov 18, 1999 at 17:53 +0100, Peter Schopen wrote:
Hallo, wahrscheinlich schon oft gefragt und noch mehr geantwortet.
Eben. Benutze die SDB, wenn Du schon eine SuSE und eine FAQ hast. virtually yours - Gerhard Sittig -- If you don't understand or are scared by any of the above ask your parents or an adult to help you.
participants (2)
-
Gerhard Sittig
-
Peter Schopen