Re: [suse-isdn] SuSE 8.2 und AVM FRITZ!Card DSL PCI
On Tue, Apr 08, 2003 at 08:38:21PM +0200, Thomas Necker wrote:
Hi
Ich habe ein Problem mit einer AVM FRITZ!Card DSL PCI unter SuSE 8.2. Wenn ich versuche, eine Verbindung mit kinternet aufzubauen, passiert gar nichts. In der Log-Datei stehet lapidar:
Apr 7 19:45:26 linux kernel: isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.
Mit YaST konfigurierte Geräte sind:
- AVM FRITZ!Card DSL PCI Als contr0 konfiguriert - ISDN-Verbindung Als net0 mit Provider freenet (Protokoll syncppp) konfiguriert
Das ist dann auch eine ISDN Verbindung - keine DSL
Als seitheriger Modem-Benutzer bin ich leider etwas hilflos, wo ich anfangen könnte zu suchen. Seltsam kommt mir vor, daß bei den oben konfigurierten Geräten nirgendwo ippp0 vorkommt, während beim Modem an gleicher Stelle ppp0 durchaus vorhanden ist. Seltsam auch, daß /dev/ippp0 zur Gruppe root gehört und die Permissions 600 hat
Das ist OK.
Ich wäre dankbar für jeden Tip.
Das gesamte Log sieht folgendermaßen aus:
... Sieht alles OK aus.
<snip>
Apr 7 19:45:26 linux kernel: isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.
Das bedeutet das der ipppd nicht laeuft. Was passiert wenn Du als root rcnetwork start -o type=ippp machst ? -- Karsten Keil SuSE Labs ISDN development
Sorry für die verspätete Antwort, aber der Rechner steht bei einem Freund.
Mit YaST konfigurierte Geräte sind:
- AVM FRITZ!Card DSL PCI Als contr0 konfiguriert - ISDN-Verbindung Als net0 mit Provider freenet (Protokoll syncppp) konfiguriert
Das ist dann auch eine ISDN Verbindung - keine DSL
Das ist auch so gewünscht.
Das bedeutet das der ipppd nicht laeuft. Was passiert wenn Du als root
rcnetwork start -o type=ippp
machst ?
Nicht besonders aussagekräftig: linux:~ # rcnetwork start -o type=ippp debug rcnetwork [DEBUG] CONFFILES = ippp0 rcnetwork [DEBUG] CONFIG = rcnetwork [DEBUG] INTERFACE = Setting up network interfaces: ippp0 askpassword=yes: rc network cannot start this interface rcnetwork [DEBUG] (returned 5) onboot In der Log-Datei steht gar nichts als Grund. Ich hatte den Rechner frisch installiert, die ISDN-Einrichtung beim Installieren aber übersprungen und erst nachträglich durchgeführt. Was könnte ich denn sonst noch an Analysen durchführen? Vielleicht helfen noch die vorhandenen PCI-Devices: PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 2). Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 2). Master Capable. Latency=64. Min Gnt=8. Bus 0, device 29, function 0: USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 2). IRQ 5. I/O at 0xd800 [0xd81f]. Bus 0, device 29, function 1: USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 2). IRQ 9. I/O at 0xd400 [0xd41f]. Bus 0, device 29, function 2: USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 2). IRQ 9. I/O at 0xd000 [0xd01f]. Bus 0, device 29, function 7: USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 2). IRQ 11. Non-prefetchable 32 bit memory at 0xf1800000 [0xf18003ff]. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 130). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 2). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 2). IRQ 9. I/O at 0xf000 [0xf00f]. Non-prefetchable 32 bit memory at 0x20000000 [0x200003ff]. Bus 0, device 31, function 5: Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 2). IRQ 9. I/O at 0xb800 [0xb8ff]. I/O at 0xb400 [0xb43f]. Non-prefetchable 32 bit memory at 0xef800000 [0xef8001ff]. Non-prefetchable 32 bit memory at 0xef000000 [0xef0000ff]. Bus 1, device 0, function 0: VGA compatible controller: PCI device 10de:0182 (nVidia Corporation) (rev 162). IRQ 5. Master Capable. Latency=64. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xf2000000 [0xf2ffffff]. Prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. Bus 2, device 5, function 0: Ethernet controller: PCI device 14e4:4401 (Broadcom Corporation) (rev 1). IRQ 10. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xf1000000 [0xf1001fff]. Bus 2, device 13, function 0: Multimedia controller: PCI device 1131:5402 (Philips Semiconductors) (rev 131). IRQ 9. Master Capable. Latency=32. Min Gnt=3.Max Lat=1. Non-prefetchable 32 bit memory at 0xf0800000 [0xf0ffffff]. Non-prefetchable 32 bit memory at 0xf0000000 [0xf01fffff]. Tschüß, Thomas -- -------------------------------------------- Thomas Necker EMail: devel@ThomasNecker.de --------------------------------------------
On Fri, Apr 11, 2003 at 07:33:38PM +0200, Thomas Necker wrote:
Sorry für die verspätete Antwort, aber der Rechner steht bei einem Freund.
Mit YaST konfigurierte Geräte sind:
- AVM FRITZ!Card DSL PCI Als contr0 konfiguriert - ISDN-Verbindung Als net0 mit Provider freenet (Protokoll syncppp) konfiguriert
Das ist dann auch eine ISDN Verbindung - keine DSL
Das ist auch so gewünscht.
Das bedeutet das der ipppd nicht laeuft. Was passiert wenn Du als root
rcnetwork start -o type=ippp
machst ?
Nicht besonders aussagekräftig:
linux:~ # rcnetwork start -o type=ippp debug rcnetwork [DEBUG] CONFFILES = ippp0 rcnetwork [DEBUG] CONFIG = rcnetwork [DEBUG] INTERFACE = Setting up network interfaces: ippp0 askpassword=yes: rc network cannot start this interface rcnetwork [DEBUG] (returned 5) onboot
Doch das sagt schon alles. Das ask passwort bei ipppd funktioniert momentan nur ueber manuellen Start das heist kinternet kann nicht verwendet werden bevor nicht als root ifup ippp0 gemacht wurde. Also am besten ask passwort ausschalten. -- Karsten Keil SuSE Labs ISDN development
Doch das sagt schon alles. Das ask passwort bei ipppd funktioniert momentan nur ueber manuellen Start das heist kinternet kann nicht verwendet werden bevor nicht als root ifup ippp0 gemacht wurde. Also am besten ask passwort ausschalten.
Danke für die Antwort. Aber dann wird das Paßwort auf der Platte gespeichert, was ich prinzipiell immer vermeide. Ist das denn ein großes Problem oder ist da demnächst ein Patch zu erwarten? Gibt es irgendeine (für einen unbedarften User) bequeme Möglichkeit außer kinternet, eine Verbindung mit Eingabe des Paßworts beim Verbindungsaufbau herzustellen? Was macht "ifup ippp0" denn genau? Wählt es sich automatisch ein? Oder muß ich das nur einmal nach dem Systemstart machen und kann dann kinternet mit askpassword benutzen? Tschüß, Thomas -- -------------------------------------------- Thomas Necker EMail: devel@ThomasNecker.de --------------------------------------------
participants (2)
-
Karsten Keil
-
Thomas Necker