Hallo Liste, Ich habe meinen SuSE-Linux Rechner (Version 6.4) mit der Fritz!PCI an einer Telefonanlage EUMEX 322 PCI mit unten aufgeführten Konfigurationsdateien eingerichtet und erhalte folgende Log-Dateien. auszug aus der var/log/isdnlog --------snip ------ May 23 12:56:47 2000| |+49413123 | 0| 0| 959079407| -1|I| 26| 0| 0|3.2|1|1|0.025|DM|0| 33| -1| May 23 12:56:51 2000| |+49413127 |-959079411| 1429348| 959079411| -1|I| -1| 0| 0|3.2|1|1|0.025|DM|0| 33| -1| May 23 18:14:05 2000| | | 169| 16932| 959098445| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 23 18:19:49 2000| | | 0| 0| 959098789| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 23 18:24:49 2000| | |10607| 1060643| 959099089| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 24 09:27:33 2000| | | 1876| 187563| 959153253| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| ------- snap ------ auszug aus /var/log/messages --------- snip ------------ May 24 08:53:22 rechner syslogd 1.3-3: restart. May 24 08:53:25 rechner kernel: klogd 1.3-3, log source = /proc/kmsg started. May 24 08:53:25 rechner kernel: Inspecting /boot/System.map-2.2.14 May 24 08:53:26 rechner kernel: Loaded 8865 symbols from /boot/System.map-2.2.14. May 24 08:53:26 rechner kernel: Symbols match kernel version 2.2.14. May 24 08:53:26 rechner kernel: Loaded 220 symbols from 11 modules. May 24 08:53:26 rechner kernel: ISDN subsystem Rev: 1.97/1.82/1.103/1.61/1.17/1.3 loaded May 24 08:53:26 rechner kernel: HiSax: Linux Driver for passive ISDN cards May 24 08:53:26 rechner kernel: HiSax: Version 3.3d (module) May 24 08:53:26 rechner kernel: HiSax: Layer1 Revision 2.37 May 24 08:53:26 rechner kernel: HiSax: Layer2 Revision 2.20 May 24 08:53:26 rechner kernel: HiSax: TeiMgr Revision 2.13 May 24 08:53:26 rechner kernel: HiSax: Layer3 Revision 2.10 May 24 08:53:26 rechner kernel: HiSax: LinkLayer Revision 2.40 May 24 08:53:26 rechner kernel: HiSax: Approval certification valid May 24 08:53:26 rechner kernel: HiSax: Approved with ELSA Quickstep series cards May 24 08:53:26 rechner kernel: HiSax: Approval registration numbers: May 24 08:53:26 rechner kernel: HiSax: German D133361J CETECOM ICT Services GmbH May 24 08:53:26 rechner kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH May 24 08:53:26 rechner kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards May 24 08:53:26 rechner kernel: HiSax: Total 1 card defined May 24 08:53:26 rechner kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) May 24 08:53:27 rechner kernel: HiSax: AVM PCI driver Rev. 1.14 May 24 08:53:27 rechner kernel: AVM PCI: stat 0x2020a May 24 08:53:27 rechner kernel: AVM PCI: Class A Rev 2 May 24 08:53:27 rechner kernel: HiSax: AVM Fritz!PCI config irq:11 base:0xD000 May 24 08:53:27 rechner kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1 May 24 08:53:27 rechner kernel: AVM Fritz PnP/PCI: IRQ 11 count 0 May 24 08:53:27 rechner kernel: AVM Fritz PnP/PCI: IRQ 11 count 5 May 24 08:53:27 rechner kernel: HiSax: DSS1 Rev. 2.22 May 24 08:53:27 rechner kernel: HiSax: 2 channels added May 24 08:53:28 rechner kernel: HiSax: MAX_WAITING_CALLS added May 24 08:53:28 rechner kernel: HiSax: debugging flags card 1 set to 4 May 24 08:53:28 rechner kernel: ippp, open, slot: 0, minor: 0, state: 0000 May 24 08:53:28 rechner kernel: ippp_ccp: allocated reset data structure c33cc000 May 24 08:53:28 rechner kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html May 24 08:53:28 rechner kernel: ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe000, IRQ 15. May 24 08:53:28 rechner kernel: eth0: RealTek RTL-8029 found at 0xe000, IRQ 15, 00:E0:7D:80:47:0B. May 24 08:53:28 rechner kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de) May 24 08:53:28 rechner kernel: nfsd_fh_init : initialized fhcache, entries=512 May 24 08:53:37 rechner modprobe: modprobe: Can't locate module char-major-4 May 24 08:53:37 rechner /usr/sbin/gpm[261]: oops() invoked from gpm.c(897) May 24 08:53:37 rechner /usr/sbin/gpm[261]: /dev/mouse: No such device May 24 08:53:44 rechner sshd[308]: log: Server listening on port 22. May 24 08:53:44 rechner sshd[308]: log: Generating 768 bit RSA key. May 24 08:53:45 rechner sshd[308]: log: RSA key generation complete. May 24 08:53:45 rechner /usr/sbin/cron[317]: (CRON) STARTUP (fork ok) May 24 08:53:46 rechner in.identd[321]: started May 24 09:27:30 rechner su1: jens success: dial May 24 09:27:31 rechner kernel: ippp0: dialing 1 00101901929... May 24 09:27:33 rechner ipppd[121]: Local number: 27, Remote number: 00101901929, Type: outgoing May 24 09:27:33 rechner ipppd[121]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 May 24 09:27:33 rechner kernel: isdn_net: ippp0 connected May 24 09:27:33 rechner kernel: isdn_net: chargetime of ippp0 now 239887 May 24 09:27:34 rechner ipppd[121]: Remote message: May 24 09:27:34 rechner ipppd[121]: MPPP negotiation, He: No We: No May 24 09:27:34 rechner ipppd[121]: CCP enabled! Trying CCP. May 24 09:27:34 rechner ipppd[121]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) May 24 09:27:34 rechner ipppd[121]: ccp_resetci! May 24 09:27:34 rechner ipppd[121]: local IP address 213.6.97.74 May 24 09:27:34 rechner ipppd[121]: remote IP address 62.104.214.47 May 24 09:53:22 rechner -- MARK -- May 24 09:58:47 rechner su1: jens success: hangup May 24 09:58:48 rechner kernel: isdn_net: local hangup ippp0 May 24 09:58:49 rechner kernel: ippp0: Chargesum is 0 May 24 09:58:49 rechner ipppd[121]: Modem hangup May 24 09:58:49 rechner kernel: isdn: HiSax,ch0 cause: E021F May 24 09:58:49 rechner ipppd[121]: Connection terminated. May 24 09:58:49 rechner ipppd[121]: taking down PHASE_DEAD link 0, linkunit: 0 May 24 09:58:49 rechner ipppd[121]: closing fd 7 from unit 0 May 24 09:58:49 rechner ipppd[121]: link 0 closed , linkunit: 0 May 24 09:58:49 rechner ipppd[121]: reinit_unit: 0 May 24 09:58:49 rechner kernel: ippp, open, slot: 1, minor: 0, state: 0000 May 24 09:58:49 rechner kernel: ippp_ccp: allocated reset data structure c31ab000 May 24 09:58:49 rechner ipppd[121]: Connect[0]: /dev/ippp0, fd: 7 May 24 09:58:50 rechner kernel: ippp_ccp: freeing reset data structure c33cc000 --------------- snap --------------------- ich möchte folgendes mitprotokolliert haben: 1. Telefonnummer 2. Gesprächsdauer (funktioniert ja) 3. Gesprächskosten 4. empfangene und gesendete Bytes wie man anhand des auszug aus der var/log/isdnlog erkennen kann, werden zwar die verbindungen mitprotokolliert, aber die anderen infos sind nicht vorhanden. Wo liegt mein Fehler, was muß man noch wo einstellen, damit die Daten mitprotokolliert werden? Wer kann mir helfen? die isdn.conf [GLOBAL] COUNTRYPREFIX = + COUNTRYCODE = 49 AREAPREFIX = 0 AREACODE = 04123 AREADIFF = /usr/lib/isdn/vorwahl.dat [VARIABLES] [ISDNLOG] LOGFILE = /var/log/isdn.log STOPCMD=stop ILABEL = %b %e %T %ICall to tei %t from %N2 on %n2 OLABEL = %b %e %T %Itei %t calling %N2 with %n2 REPFMTWWW = "%X %D %17.17H %T %-17.17F %-20.20l SI: %S %9u %U %I %O" REPFMTSHORT = "%X%D %8.8H %T %-14.14F%U%I %O" REPFMT = " %X %D %15.15H %T %-15.15F %7u %U %I %O" CHARGEMAX=36.00 CURRENCY=0.025,DM BYTEMAX=734003200,16 CONNECTMAX=162000,1 RATEFILE = /usr/lib/isdn/rate-de.dat RATECONF = /etc/isdn/rate.conf HOLIDAYS = /usr/lib/isdn/holiday-de.dat COUNTRYFILE = /usr/lib/isdn/country-de.dat #SPECIALNUMBERS = /usr/lib/isdn/sonderrufnummern.dat ZONEFILE=/usr/lib/isdn/zone-de-%s.dat VBN=010 VBNLEN=2:3 PRESELECTED=33 die callerid.conf [MSN] number = 27 # interne telefonnr der Telefonanlage EUMEX 322 PCI für fritzcard alias = internet zone = 0 interface = ippp0 SI=7 [MSN] number = 4711887 # eigentliche telefonnummer der fritzcard alias = interruf zone = 1 interface = ippp0 [MSN] number = 19 # interne telefonnr der EUMEX 322 PCI f. einen weiteren apparat alias = Schlafzimmer zone = 0 [MSN] number = 29# interne telefonnr der EUMEX 322 PCI f. einen weiteren apparat alias = Wohnzimmer zone = 0 [MSN] number = 23# interne telefonnr der EUMEX 322 PCI f. einen weiteren apparat alias = arbeitszimmer zone = 1 [MSN] number = 44444444 # externe telefonnummer alias = arbeitsruf zone = 1 [MSN] number = 10 # interne telefonnummer der Telefonanlage EUMEX 322 PCI für fax alias = Fax zone = 0 [MSN] number = 0040123456 alias = müllermilch zone = 3 [MSN] number = 040123456 alias = müllermilch # doppelt, da ich nicht weiß obŽs funktioniert zone = 3 [MSN] number = 00150019251 alias = talkline [MSN] number = 0150019251 # nur kontrolle, wegen der Null alias = talkinel etc/isdn/isdnlog.isdnctrl0.options [options] daemon=yes syslog=1024 xisdn=4087 monitor=yes stdout=2048 newline=yes width=80 start=yes port=20011 thruput=5 time=2 bilingual=no amt=0 hangup=5:3 other=yes