Guten Morgen, vielen Dank schon mal für die bisherige Hilfe.... hier nun die weiteren Informationen. Bitte schaut doch auch noch mal in die /var/logs/messages da scheint wohl was mit dem IRQ nicht zu stimmen. Wer hat da noch einen Vorschlag? Gruß Christian linux:/etc/init.d # cat /etc/rc.config.d/i4l_hardware.rc.config # # driver-id for card identification # set to "HiSax" # or whatever you defined when loading driver within kernel # I4L_ID_1="eicon0" # # D-channel protocol 1=1TR6, 2=EDSS1(Euro-ISDN) 3=leased 4=NI1 # I4L_PROTOCOL_1="2" # Type ISDN-card # HiSax passiv type 1...7999 (used 37) # AVM active type 8001 # Eicon active type 8010 # IBM active type 8020 # ICN active type 8030 I4L_TYPE_1="8010" # # Subtype of a given type # I4L_SUBTYPE_1="2" # # used IRQ if any # eg. 12 or 15 when loading as module # set to "" when driver is loaded within kernel # I4L_IRQ_1="11" # # Membase if any # I4L_MEMBASE_1="0xd0000" # # IO address if any # I4L_IO_1="" # # IO0 (ISA PnP) # I4L_IO0_1="" # # IO1 (ISA PnP) # I4L_IO1_1="" # # IO2 (ISA PnP) # I4L_IO2_1="" # # for backward compatibility # HiSax-modul: the complete line to load module # e.g Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and # ELSA QuickStep1000 PCI, Euro ISDN: # "type=5,18 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa" # # is equivalent for follow commandline # modprobe hisax type=5,18 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa # I4L_MODUL_OPTIONS_1="" # # specials # # Debug Level, 4 (default) # I4L_HISAXDEBUG_1="" # # EAZ mapping set # eg: I4L_EAZMAP_1="280,280,280,283,283,280,-,-" I4L_EAZMAP_1="" linux:/etc/init.d # linux:/etc/init.d # ./i4l_hardware start Loading ISDN drivers ... Loading EICON driver ... /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/net/slhc.o Using /lib/modules/2.4.10-4GB/kernel/drivers/net/slhc.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/isdn.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/isdn.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/eicon/eicon.o irq=11 membase=0xd0000 id=eicon0 Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/eicon/eicon.o Loading EICON firmware ... Loading Startup Code (dnload.bin 1024 bytes)... Adapter-type is Eicon-SCOM Protocol File : /usr/lib/isdn/te_etsi.sy (67406 bytes) Downloading Code (67406 bytes)... Error, possibly updated driver, try re-compile utility ! ioctl LOAD: Input/output error Loading of Firmware etsi failed! Check that the values in '/etc/rc.config.d/*' are correct: and see /usr/share/doc/packages/i4l/README.eicon I4L_ID: eicon0 I4L_IRQ: 11 I4L_MEMBASE: 0xd0000 linux:/etc/init.d # /var/logs/messages... Ok meine Uhr stimmt nicht ganz :-) und auf der eth0 card war kein Kabel. Die tr0 card war zu diesem Zeitpunkt auch noch die einzige im Ring. eth0 und tr0 arbeiten beide OK. Jan 3 11:58:59 linux kernel: Kernel logging (proc) stopped. Jan 3 11:58:59 linux kernel: Kernel log daemon terminating. Jan 3 11:59:00 linux exiting on signal 15 Jan 3 12:02:58 linux syslogd 1.4.1: restart. Jan 3 12:03:03 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Jan 3 12:03:03 linux kernel: Inspecting /boot/System.map-2.4.10-4GB Jan 3 12:03:05 linux rpc.statd[360]: Version 0.3.1 Starting Jan 3 12:03:08 linux kernel: Loaded 11264 symbols from /boot/System.map-2.4.10-4GB. Jan 3 12:03:08 linux kernel: Symbols match kernel version 2.4.10. Jan 3 12:03:08 linux kernel: Loaded 262 symbols from 5 modules. Jan 3 12:03:08 linux kernel: CSLIP: code copyright 1989 Regents of the University of California Jan 3 12:03:08 linux kernel: ISDN subsystem Rev: 1.114.6.14/1.94.6.7/1.140.6.8/1.85.6.6/1.21.6.1/1.5.6.3 loaded Jan 3 12:03:08 linux kernel: Eicon active ISDN driver Rev: 1.37.6.5/1.15.6.2/1.16/1.41.6.2 Jan 3 12:03:08 linux kernel: Eicon active ISDN driver Release: 2.0.16 Jan 3 12:03:08 linux kernel: Eicon: Driver-ID: eicon Jan 3 12:03:08 linux kernel: Eicon: assuming bri card at 0xd0000 Jan 3 12:03:08 linux kernel: Divas: 0 cards detected Jan 3 12:03:08 linux kernel: Eicon: 1 card added Jan 3 12:03:08 linux kernel: ISDN-SCOM: startup-code loaded Jan 3 12:03:08 linux kernel: Eicon ISDN-SCOM at 0xd0000, irq 11. Jan 3 12:03:08 linux kernel: ISDN-SCOM 960kB, loading firmware ... Jan 3 12:03:08 linux kernel: eicon_isa_load: IRQ # 11 test failed Hier könnte das Problem sein, aber welcher IRQ ist dann besser geeignet? Jan 3 12:03:08 linux kernel: Eicon active ISDN driver unloaded Jan 3 12:03:08 linux kernel: ISDN-subsystem unloaded Jan 3 12:03:08 linux kernel: isapnp: Scanning for PnP cards... Jan 3 12:03:08 linux kernel: isapnp: No Plug & Play device found Jan 3 12:03:08 linux kernel: smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov) Jan 3 12:03:08 linux kernel: eth0: SMC Ultra at 0x300, 00 00 C0 E0 14 A6, IRQ 10 memory 0xcc000-0xcffff. Jan 3 12:03:08 linux kernel: Jan 3 12:03:08 linux kernel: ibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson Jan 3 12:03:08 linux kernel: v2.1.125 10/20/98 Paul Norton <pnorton@ieee.org> Jan 3 12:03:08 linux kernel: v2.2.0 12/30/98 Joel Sloan <jjs@c-me.com> Jan 3 12:03:08 linux kernel: v2.2.1 02/08/00 Mike Sullivan <sullivam@us.ibm.com> Jan 3 12:03:08 linux kernel: v2.2.2 07/27/00 Burt Silverman <burts@us.ibm.com> Jan 3 12:03:08 linux kernel: v2.4.0 03/01/01 Mike Sullivan <sullivan@us.ibm.com> Jan 3 12:03:08 linux kernel: tr0: ISA P&P Auto 16/4 Adapter found Jan 3 12:03:08 linux kernel: tr0: using irq 3, PIOaddr a20, 16K shared RAM. Jan 3 12:03:08 linux kernel: tr0: Hardware address : 00:04:AC:83:70:44 Jan 3 12:03:08 linux kernel: tr0: Shared RAM paging enabled. Page size: 16K Shared Ram size 63K Jan 3 12:03:08 linux kernel: tr0: Maximum Receive Internet Protocol MTU 16Mbps: 16344, 4Mbps: 6104 Jan 3 12:03:08 linux kernel: tr0: Initial interrupt : 16 Mbps, shared RAM base 000c8000. Jan 3 12:03:08 linux kernel: tr0: Opening adapter: Xmit bfrs: 2 X 16384, Rcv bfrs: 16 X 1032 Jan 3 12:03:08 linux kernel: tr0: Adapter is up and running Jan 3 12:03:08 linux kernel: IPv6 v0.8 for NET4.0 Jan 3 12:03:08 linux kernel: IPv6 over IPv4 tunneling driver Jan 3 12:03:08 linux kernel: NETDEV WATCHDOG: eth0: transmit timed out Jan 3 12:03:08 linux kernel: eth0: Tx timed out, cable problem? TSR=0x0, ISR=0x0, t=119. Jan 3 12:03:08 linux kernel: NETDEV WATCHDOG: eth0: transmit timed out Jan 3 12:03:08 linux kernel: eth0: Tx timed out, cable problem? TSR=0x0, ISR=0x0, t=419. Jan 3 12:03:08 linux kernel: eth0: no IPv6 routers present Jan 3 12:03:08 linux kernel: tr0: no IPv6 routers present Hier noch ein ifconfig für die ISA adressen und irq linux:/var/log # ifconfig eth0 Protokoll:Ethernet Hardware Adresse 00:00:C0:E0:14:A6 inet Adresse:10.10.11.10 Bcast:10.10.255.255 Maske:255.0.0.0 inet6 Adresse: fe80::200:c0ff:fee0:14a6/10 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2142 errors:0 dropped:0 overruns:0 frame:0 TX packets:1834 errors:2 dropped:0 overruns:0 carrier:0 Kollisionen:1 Sendewarteschlangenlänge:100 RX bytes:152253 (148.6 Kb) TX bytes:374135 (365.3 Kb) Interrupt:10 Basisadresse:0x310 Speicher:cc000-d0000 lo Protokoll:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:752 (752.0 b) TX bytes:752 (752.0 b) tr0 Protokoll:16/4 Mbps Token Ring (New) Hardware Adresse 00:04:AC:83:70:44 inet Adresse:10.10.10.10 Bcast:10.10.10.255 Maske:255.255.255.0 inet6 Adresse: fe80::204:acff:fe83:7044/10 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1 RX packets:159 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:100 RX bytes:19675 (19.2 Kb) TX bytes:19971 (19.5 Kb) Interrupt:3 Basisadresse:0xa20 Speicher:c8000-cbfff linux:/var/log # -- SMS zu teuer? 50 SMS aus dem E-Mail Office versenden - und das Monat fuer Monat! Dazu gibt es noch 100 MB Speicherplatz fuer die Mailbox, 700 MB virtuelle Festplatte und 50 Faxe pro Monat! Jetzt anmelden unter http://www.freenet.de/tipp/premium/index.html