SuSE 9.1 + Kernel 2.6.10 = Kein ISDN Device

28 Dec 2004

      Hallo,

ich möchte ein ISDN Dial-In aufsetzen. Leider komme ich nicht weiter.
Nach dem Updaten des UDEV läuft zumindest die CAPI Schnittstelle,
leider wird der Rest nicht initalisert :-(

Wenn ich das USB Kabel einstecke leuchtet an der FritzCard die
Power und USB LED. Wenn ich zb. "capiinfo" eingebe geht die Power
LED aus. Bei meinen Experimenten hatte ich kurzzeitig sogar
alle drei LED am leuchten (POWER,USB, D)
Was ja schonmal nicht schlecht ausschaut, leider bekomm ich das auch
nicht mehr wiederholt.

Mein System: SuSE 9.1
ISDN-Karte: FritzCard USB

Wäre schön wenn mir jemand den entscheidenen Tipp geben kann :)

Grüße
Thomas

Logfiles:--------------------------------------------------------------

# uname -a
Linux nemon-md 2.6.10 #1 Mon Dec 27 15:42:54 CET 2004 i686 athlon i386
GNU/Linux

-----------------------------------------------------------------------
# cat /var/log/messages

Dec 28 12:49:56 nemon-md kernel: usb 4-2: new full speed USB device
using uhci_hcd and address 3
Dec 28 12:49:57 nemon-md /etc/hotplug/usb.agent[15065]: need a device
for this command
Dec 28 12:49:57 nemon-md kernel: fcusb: Driver 'fcusb' attached to
stack. (152)
Dec 28 12:49:57 nemon-md kernel: fcusb: Stack version 3.11-04
Dec 28 12:49:57 nemon-md kernel: kcapi: Controller 1: fcusb-0003 attached
Dec 28 12:49:57 nemon-md kernel: kcapi: card 1 "fcusb-0003" ready.
Dec 28 12:50:02 nemon-md /etc/hotplug/usb.agent[15065]: head: cannot
open `/dev/isdninfo' for reading: No such device or address
Dec 28 12:50:02 nemon-md ifup-ippp: no ISDN device available

-----------------------------------------------------------------------
# lsmod
Module                  Size  Used by
fcusb                 608664  0
capi                   17856  0
capifs                  6024  2 capi
kernelcapi             46752  2 fcusb,capi
[...]

-----------------------------------------------------------------------
# capiinfo | more
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-04  (49.20)
Serial Number: 0000000
BChannels: 2
Global Options: 0x00000039
    internal controller supported
    DTMF supported
    Supplementary Services supported
    channel allocation supported (leased lines)
[...]

-----------------------------------------------------------------------

# ls -1 /etc/sysconfig/isdn
capi.conf.usb.contr0
cfg-contr0
cfg-net0

# more capi.conf.usb.contr0
#temp capi.conf generated by load-avmusb
# card  file    proto   io      irq     mem     cardnr  options
fcusb   -       -       -       -       -       -

# more cfg-contr0
AREACODE="+49 391"
DIALPREFIX=""
DRIVER="fcusb"
ISDNLOG_START="yes"
NAME="AVM FRITZ!Card USB"
PARA_SUBTYPE="1"
PARA_TYPE="8003"
PROTOCOL="euro"
STARTMODE="hotplug"
UNIQUE="mZxt.RVNsyDIgL75"

# more cfg-net0
CALLBACK="off"
CBDELAY="2"
CHARGEHUP="off"
DEFAULTROUTE="no"
DYNAMICIP="no"
FIREWALL="no"
IPADDR="192.168.1.1"
IPPPD_OPTIONS=""
MSN="5571718"
MULTILINK="no"
PROTOCOL="syncppp"
PROVIDER="provider2"
PTPADDR="192.168.1.2"
REMOTE_IN=""
SECURE="off"
STARTMODE="hotplug"

# more /etc/sysconfig/network/ifcfg-ippp0
#
# DO NOT EDIT THIS FILE !!!
# autogenerated by SuSEconfig.isdn from /etc/sysconfig/isdn/cfg-net0
# edit /etc/sysconfig/isdn/cfg-net0 instead and run
# SuSEconfig --module isdn
#
STARTMODE="hotplug"
IPADDR="192.168.1.1"
PTPADDR="192.168.1.2"
DEFAULTROUTE="no"
FIREWALL="no"
MSN="557****"
DIALMODE="manual"
DIALPREFIX=""
DIALMAX=""
REMOTE_OUT=""
REMOTE_IN=""
PROVIDER="provider2"
SECURE="off"
CHARGEHUP="off"
CALLBACK="off"
CBDELAY="2"
CBHUP=""
IHUP=""
VERBOSE_LEVEL=""
SLAVES=""
MULTILINK="no"
SLAVEMSN=""
SLAVE_IN=""
SLAVE_OUT=""
LAYER2="hdlc"
LAYER3="trans"
ENCAP="syncppp"
IP_RESEND=""
IP_RESEND_PARAMETER=""
SMPPPD_IGNORE=""
DYNAMICIP="no"
IPPPD_OPTIONS=""
ASKPASSWORD="no"
MTU=""
MRU=""
RUN_POLL_TCPIP=""

-----------------------------------------------------------------------
# capiinit status
1 fcusb      running  fcusb-0004       A1 3.11-04 4

-----------------------------------------------------------------------
# cinternet -I
01 a dsl0
02 i ippp0
# cinternet -i ippp0 -A
# tail /var/log/messages
Dec 28 13:01:19 nemon-md ifup-ippp: no ISDN device available
# cat /dev/isdnctrl
cat: /dev/isdnctrl: Kein passendes Gerät bzw. keine passende Adresse
gefunden
# cat /dev/isdninfo
cat: /dev/isdninfo: Kein passendes Gerät bzw. keine passende Adresse
gefunden

Thomas Oeding

Thomas Oeding

tags

participants (1)