======================================== From: guenny@gmx.de To: Internet Mail::[mark@lumbertrade.com]; Internet Mail::[suse-isdn@suse.com] Subject: [suse-isdn] isdnlog - konfiguration Date: 5/24/00 10:44 AM Hallo Liste, Ich habe meinen SuSE-Linux Rechner (Version 6.4) mit der Fritz!PCI an ein= er=20 Telefonanlage EUMEX 322 PCI mit unten aufgef=FChrten Konfigurationsdateie= n=20 eingerichtet und erhalte folgende Log-Dateien. auszug aus der var/log/isdnlog=20 --------snip ------ May 23 12:56:47 2000| |+49413123 | 0| 0|=20 959079407| -1|I| 26| 0| 0|3.2|1|1|0.025|DM|0| 33| -1| May 23 12:56:51 2000| |+49413127 |-959079411| 1429= 348|=20 959079411| -1|I| -1| 0| 0|3.2|1|1|0.025|DM|0| 33| -1| May 23 18:14:05 2000| | | 169| 16932|=20 959098445| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 23 18:19:49 2000| | | 0| 0|=20 959098789| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 23 18:24:49 2000| | |10607| 1060643|=20 959099089| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| May 24 09:27:33 2000| | | 1876| 187563|=20 959153253| -1|O| 31| 0| 0|3.2|0|0|0.025|DM|0| 29| -1| ------- snap ------ auszug aus /var/log/messages --------- snip ------------ May 24 08:53:22 rechner syslogd 1.3-3: restart. May 24 08:53:25 rechner kernel: klogd 1.3-3, log source =3D /proc/kmsg st= arted. May 24 08:53:25 rechner kernel: Inspecting /boot/System.map-2.2.14 May 24 08:53:26 rechner kernel: Loaded 8865 symbols from=20 /boot/System.map-2.2.14. May 24 08:53:26 rechner kernel: Symbols match kernel version 2.2.14. May 24 08:53:26 rechner kernel: Loaded 220 symbols from 11 modules. May 24 08:53:26 rechner kernel: ISDN subsystem Rev:=20 1.97/1.82/1.103/1.61/1.17/1.3 loaded May 24 08:53:26 rechner kernel: HiSax: Linux Driver for passive ISDN card= s May 24 08:53:26 rechner kernel: HiSax: Version 3.3d (module) May 24 08:53:26 rechner kernel: HiSax: Layer1 Revision 2.37 May 24 08:53:26 rechner kernel: HiSax: Layer2 Revision 2.20 May 24 08:53:26 rechner kernel: HiSax: TeiMgr Revision 2.13 May 24 08:53:26 rechner kernel: HiSax: Layer3 Revision 2.10 May 24 08:53:26 rechner kernel: HiSax: LinkLayer Revision 2.40 May 24 08:53:26 rechner kernel: HiSax: Approval certification valid May 24 08:53:26 rechner kernel: HiSax: Approved with ELSA Quickstep serie= s=20 cards May 24 08:53:26 rechner kernel: HiSax: Approval registration numbers: May 24 08:53:26 rechner kernel: HiSax: German D133361J CETECOM ICT Servic= es=20 GmbH May 24 08:53:26 rechner kernel: HiSax: EU (D133362J) CETECOM ICT Services= GmbH May 24 08:53:26 rechner kernel: HiSax: Approved with Eicon Technology Div= a=20 2.01 PCI cards May 24 08:53:26 rechner kernel: HiSax: Total 1 card defined May 24 08:53:26 rechner kernel: HiSax: Card 1 Protocol EDSS1 Id=3DHiSax (= 0) May 24 08:53:27 rechner kernel: HiSax: AVM PCI driver Rev. 1.14 May 24 08:53:27 rechner kernel: AVM PCI: stat 0x2020a May 24 08:53:27 rechner kernel: AVM PCI: Class A Rev 2 May 24 08:53:27 rechner kernel: HiSax: AVM Fritz!PCI config irq:11 base:0= xD000 May 24 08:53:27 rechner kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1 May 24 08:53:27 rechner kernel: AVM Fritz PnP/PCI: IRQ 11 count 0 May 24 08:53:27 rechner kernel: AVM Fritz PnP/PCI: IRQ 11 count 5 May 24 08:53:27 rechner kernel: HiSax: DSS1 Rev. 2.22 May 24 08:53:27 rechner kernel: HiSax: 2 channels added May 24 08:53:28 rechner kernel: HiSax: MAX_WAITING_CALLS added May 24 08:53:28 rechner kernel: HiSax: debugging flags card 1 set to 4 May 24 08:53:28 rechner kernel: ippp, open, slot: 0, minor: 0, state: 000= 0 May 24 08:53:28 rechner kernel: ippp_ccp: allocated reset data structure=20 c33cc000 May 24 08:53:28 rechner kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P= =2E=20 Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html May 24 08:53:28 rechner kernel: ne2k-pci.c: PCI NE2000 clone 'RealTek=20 RTL-8029' at I/O 0xe000, IRQ 15. May 24 08:53:28 rechner kernel: eth0: RealTek RTL-8029 found at 0xe000, I= RQ=20 15, 00:E0:7D:80:47:0B. May 24 08:53:28 rechner kernel: Installing knfsd (copyright (C) 1996=20 okir@monad.swb.de) May 24 08:53:28 rechner kernel: nfsd_fh_init : initialized fhcache,=20 entries=3D512 May 24 08:53:37 rechner modprobe: modprobe: Can't locate module char-majo= r-4 May 24 08:53:37 rechner /usr/sbin/gpm[261]: oops() invoked from gpm.c(897= ) May 24 08:53:37 rechner /usr/sbin/gpm[261]: /dev/mouse: No such device May 24 08:53:44 rechner sshd[308]: log: Server listening on port 22. May 24 08:53:44 rechner sshd[308]: log: Generating 768 bit RSA key. May 24 08:53:45 rechner sshd[308]: log: RSA key generation complete. May 24 08:53:45 rechner /usr/sbin/cron[317]: (CRON) STARTUP (fork ok)=20 May 24 08:53:46 rechner in.identd[321]: started May 24 09:27:30 rechner su1: jens success: dial May 24 09:27:31 rechner kernel: ippp0: dialing 1 00101901929... May 24 09:27:33 rechner ipppd[121]: Local number: 27, Remote number:=20 00101901929, Type: outgoing May 24 09:27:33 rechner ipppd[121]: PHASE_WAIT -> PHASE_ESTABLISHED, ifun= it:=20 0, linkunit: 0, fd: 7 May 24 09:27:33 rechner kernel: isdn_net: ippp0 connected May 24 09:27:33 rechner kernel: isdn_net: chargetime of ippp0 now 239887 May 24 09:27:34 rechner ipppd[121]: Remote message:=20 May 24 09:27:34 rechner ipppd[121]: MPPP negotiation, He: No We: No May 24 09:27:34 rechner ipppd[121]: CCP enabled! Trying CCP.=20 May 24 09:27:34 rechner ipppd[121]: CCP: got ccp-unit 0 for link 0 (proto= col:=20 0x80fd) May 24 09:27:34 rechner ipppd[121]: ccp_resetci!=20 May 24 09:27:34 rechner ipppd[121]: local IP address 213.6.97.74 May 24 09:27:34 rechner ipppd[121]: remote IP address 62.104.214.47 May 24 09:53:22 rechner -- MARK -- May 24 09:58:47 rechner su1: jens success: hangup May 24 09:58:48 rechner kernel: isdn_net: local hangup ippp0 May 24 09:58:49 rechner kernel: ippp0: Chargesum is 0 May 24 09:58:49 rechner ipppd[121]: Modem hangup May 24 09:58:49 rechner kernel: isdn: HiSax,ch0 cause: E021F May 24 09:58:49 rechner ipppd[121]: Connection terminated. May 24 09:58:49 rechner ipppd[121]: taking down PHASE_DEAD link 0, linkun= it: 0 May 24 09:58:49 rechner ipppd[121]: closing fd 7 from unit 0 May 24 09:58:49 rechner ipppd[121]: link 0 closed , linkunit: 0 May 24 09:58:49 rechner ipppd[121]: reinit_unit: 0=20 May 24 09:58:49 rechner kernel: ippp, open, slot: 1, minor: 0, state: 000= 0 May 24 09:58:49 rechner kernel: ippp_ccp: allocated reset data structure=20 c31ab000 May 24 09:58:49 rechner ipppd[121]: Connect[0]: /dev/ippp0, fd: 7 May 24 09:58:50 rechner kernel: ippp_ccp: freeing reset data structure=20 c33cc000 --------------- snap --------------------- ich m=F6chte folgendes mitprotokolliert haben: 1. Telefonnummer 2. Gespr=E4chsdauer (funktioniert ja) 3. Gespr=E4chskosten=20 4. empfangene und gesendete Bytes wie man anhand des auszug aus der var/log/isdnlog erkennen kann, werden z= war=20 die verbindungen mitprotokolliert, aber die anderen infos sind nicht=20 vorhanden. Wo liegt mein Fehler, was mu=DF man noch wo einstellen, damit die Daten=20 mitprotokolliert werden? Wer kann mir helfen? die isdn.conf [GLOBAL] COUNTRYPREFIX =3D + COUNTRYCODE =3D 49 AREAPREFIX =3D 0 AREACODE =3D 04123 AREADIFF =3D /usr/lib/isdn/vorwahl.dat [VARIABLES] [ISDNLOG] LOGFILE =3D /var/log/isdn.log STOPCMD=3Dstop ILABEL =3D %b %e %T %ICall to tei %t from %N2 on %n2 OLABEL =3D %b %e %T %Itei %t calling %N2 with %n2 REPFMTWWW =3D "%X %D %17.17H %T %-17.17F %-20.20l SI: %S %9u %U %I = %O" REPFMTSHORT =3D "%X%D %8.8H %T %-14.14F%U%I %O" REPFMT =3D " %X %D %15.15H %T %-15.15F %7u %U %I %O" CHARGEMAX=3D36.00 CURRENCY=3D0.025,DM BYTEMAX=3D734003200,16 CONNECTMAX=3D162000,1 RATEFILE =3D /usr/lib/isdn/rate-de.dat RATECONF =3D /etc/isdn/rate.conf HOLIDAYS =3D /usr/lib/isdn/holiday-de.dat COUNTRYFILE =3D /usr/lib/isdn/country-de.dat #SPECIALNUMBERS =3D /usr/lib/isdn/sonderrufnummern.dat ZONEFILE=3D/usr/lib/isdn/zone-de-%s.dat=20 VBN=3D010 VBNLEN=3D2:3 PRESELECTED=3D33 die callerid.conf [MSN] number =3D 27 # interne telefonnr der Telefonanlage EUMEX 322 PCI f=FCr f= ritzcard alias =3D internet zone =3D 0 interface =3D ippp0 SI=3D7 [MSN] number =3D 4711887 # eigentliche telefonnummer der fritzcard alias =3D interruf zone =3D 1 interface =3D ippp0 [MSN] number =3D 19 # interne telefonnr der EUMEX 322 PCI f. einen weiteren app= arat alias =3D Schlafzimmer zone =3D 0 [MSN] number =3D 29# interne telefonnr der EUMEX 322 PCI f. einen weiteren appa= rat alias =3D Wohnzimmer zone =3D 0 [MSN] number =3D 23# interne telefonnr der EUMEX 322 PCI f. einen weiteren appa= rat alias =3D arbeitszimmer zone =3D 1 [MSN] number =3D 44444444 # externe telefonnummer=20 alias =3D arbeitsruf zone =3D 1 [MSN] number =3D 10 # interne telefonnummer der Telefonanlage EUMEX 322 PCI f=FC= r fax=20 alias =3D Fax zone =3D 0 [MSN] number =3D 0040123456 alias =3D m=FCllermilch zone =3D 3 [MSN] number =3D 040123456 alias =3D m=FCllermilch # doppelt, da ich nicht wei=DF ob=B4s funktionier= t zone =3D 3 [MSN] number =3D 00150019251 alias =3D talkline [MSN] number =3D 0150019251 # nur kontrolle, wegen der Null alias =3D talkinel etc/isdn/isdnlog.isdnctrl0.options [options] daemon=3Dyes syslog=3D1024 xisdn=3D4087 monitor=3Dyes stdout=3D2048 newline=3Dyes width=3D80 start=3Dyes port=3D20011 thruput=3D5 time=3D2 bilingual=3Dno amt=3D0 hangup=3D5:3 other=3Dyes --------------------------------------------------------------------- To unsubscribe, e-mail: suse-isdn-unsubscribe@suse.com For additional commands, e-mail: suse-isdn-help@suse.com