Hallo, ich habe mir gerade die 64Bit-Treiber für die Fritz PCI Isdn-Karte downgeloaded, kompiliert und installiert. Die Module scheinen auch zu funktionieren, aber wie kann ich die Karte benutzen? Jul 29 16:53:47 client1 kernel: module fcpci unsupported by SUSE/Novell, tainting kernel. Jul 29 16:53:47 client1 kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 Jul 29 16:53:47 client1 kernel: fcpci: (fcpci built on Jul 29 2005 at 16:29:55) Jul 29 16:53:47 client1 kernel: fcpci: -- 64 bit CAPI driver -- Jul 29 16:53:47 client1 kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169 Jul 29 16:53:47 client1 kernel: fcpci: AVM FRITZ!Card PCI found: port 0xd400, irq 169 Jul 29 16:53:47 client1 kernel: fcpci: Loading... Jul 29 16:53:47 client1 kernel: fcpci: Driver 'fcpci' attached to fcpci-stack. (304) Jul 29 16:53:47 client1 kernel: fcpci: Stack version 3.11-07 Jul 29 16:53:47 client1 kernel: kcapi: Controller 1: fcpci-d400-169 attached Jul 29 16:53:47 client1 kernel: kcapi: card 1 "fcpci-d400-169" ready. Jul 29 16:53:47 client1 kernel: fcpci: Loaded. Danke und Gruß Boris