RAWIP-Verbindung belegt immer zwei B-Kanaele--Normal???
Seit zwei Tagen martere ich mein Hirn und verstehe es nicht mehr. Habe eine rawip-Verbindung zwischen zwei Rechnern konfiguriert. Verwende zwei Host-routes und auf beiden Rechnern auto-dial-mode. Alles funktioniert prima ---ABER ES WERDEN IMMER BEIDE B-KAN"ALE BELEGT---- Das ist doch nicht normal oder? Ich will das beide die Verbindung aufnehmen koennen. Was ist da falsch? Anbei die Konfiguration beide interfaces. Bin fuer jeden Hinweis Dankbar. Grus Andreas ======================================== ullix:~ # isdnctrl status isdn0 isdn0 connected from 14 ullix:~ # isdnctrl list isdn0 Current setup of interface 'isdn0': EAZ/MSN: 13 Phone number(s): Outgoing: 14 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 2 Hangup-Timeout: 60 Incoming-Hangup: off ChargeHangup: off Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: rawip Slave Interface: None Slave delay: 10 Slave trigger: 6000 cps Master Interface: None Pre-Bound to: Nothing PPP-Bound to: Nothing ullix:~ # ====================================== root@plunx:/home/hallmann > isdnctrl status isdn0 isdn0 connected to 13 root@plunx:/home/hallmann > isdnctrl list isdn0 Current setup of interface 'isdn0': EAZ/MSN: 14 Phone number(s): Outgoing: 13 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 2 Hangup-Timeout: 60 Incoming-Hangup: off ChargeHangup: off Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: rawip Slave Interface: None Slave delay: 10 Slave trigger: 6000 cps Master Interface: None Pre-Bound to: Nothing PPP-Bound to: Nothing
participants (1)
-
Andreas Hallmann