Hallo, ich habe folgendes Problem mit meiner ISDN-Konfiguration, für das ich bei Google (Web und News) keine Lösung gefunden habe: Nach der Eingabe von "isdnctrl dial ipp0" an der Konsole erhalte ich /var/log/messages diese Fehlermeldung: isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon. Zusätzlich erhlate ich an der Konsole diese Meldung: sonne:/ # isdnctrl dial ippp0 ippp0: Resource temporarily unavailable Die ISDN-Konfiguration habe ich mit yast vorgenommen. Die Testläufe von yast sind auch erfolgreich. Bisher starte ich das ISDN-System manuell: sonne:/ # /sbin/init.d/i4l start Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added EAZ/MSN for ippp0 is 98762781 Layer-2-Protocol for ippp0 is hdlc Layer-3-Protocol for ippp0 is trans Encapsulation for ippp0 is syncppp Security for ippp0 is on Hangup-Timeout for ippp0 is 60 sec. Charge-Hangup for ippp0 is off Incoming-Hangup for ippp0 is off Dialmax for ippp0 is 2 times. Callback for ippp0 is off Callback delay for ippp0 is 2 sec. Reject before Callback for ippp0 is on Setting up network device ippp0 Starting ippp-daemon for ISDN device ippp0 with /etc/ppp/options.ippp0 ipppd: No devices found. ippp0 bound to 0 sonne:/ # /sbin/init.d/i4l_hardware start Loading ISDN drivers ... Loading HiSax driver ... /sbin/insmod /lib/modules/2.2.19/misc/hisax.o type=14 io=0x580 irq=3 mem=0xd0000 protocol=2 id=HiSax Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0... Ifconfig meldet nach dem Start des ISDN-Systems u.a.: sonne:/ # ifconfig ippp0 Link encap:Point-to-Point Protocol inet addr:192.168.0.2 P-t-P:192.168.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP DYNAMIC MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:30 Danke für jeden Hinweis Bye JT
On Sun, Aug 26, 2001 at 09:13:01PM +0200, Jan Tim Schueszler wrote:
Hallo,
ich habe folgendes Problem mit meiner ISDN-Konfiguration, für das ich bei Google (Web und News) keine Lösung gefunden habe:
Nach der Eingabe von "isdnctrl dial ipp0" an der Konsole erhalte ich /var/log/messages diese Fehlermeldung:
isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.
Zusätzlich erhlate ich an der Konsole diese Meldung:
sonne:/ # isdnctrl dial ippp0 ippp0: Resource temporarily unavailable
Die ISDN-Konfiguration habe ich mit yast vorgenommen. Die Testläufe von yast sind auch erfolgreich.
Bisher starte ich das ISDN-System manuell:
sonne:/ # /sbin/init.d/i4l start Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added EAZ/MSN for ippp0 is 98762781 Layer-2-Protocol for ippp0 is hdlc Layer-3-Protocol for ippp0 is trans Encapsulation for ippp0 is syncppp Security for ippp0 is on Hangup-Timeout for ippp0 is 60 sec. Charge-Hangup for ippp0 is off Incoming-Hangup for ippp0 is off Dialmax for ippp0 is 2 times. Callback for ippp0 is off Callback delay for ippp0 is 2 sec. Reject before Callback for ippp0 is on Setting up network device ippp0 Starting ippp-daemon for ISDN device ippp0 with /etc/ppp/options.ippp0 ipppd: No devices found.
Hmm. es scheint so als ob die /etc/ppp/options.ippp0 fehlerhaft ist und dort der Eintrag /dev/ippp0 fehlt. -- Karsten Keil SuSE Labs ISDN development
Jan Tim Schueszler wrote:
Hallo,
Bisher starte ich das ISDN-System manuell:
sonne:/ # /sbin/init.d/i4l start Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added
<-- snipp--> <--snipp-->
sonne:/ # /sbin/init.d/i4l_hardware start Loading ISDN drivers ... Loading HiSax driver ...
<--snipp--> Sollte das die Reihenfolge sein in der du startest, kann das auch nicht klappen, erst aktiviertst du Software die auf Hardwaretreibern aufsetzt, die noch garnicht vorhanden sind, weil du sie erst danach startest, also: rci4l_hardware start rci4l start ist die richtige Reihenfolge. So wirds auch vom INITscript aufgerufen. cu Gerald
Jan Tim Schueszler wrote:
Hallo,
Bisher starte ich das ISDN-System manuell:
sonne:/ # /sbin/init.d/i4l start Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added
<-- snipp--> <--snipp-->
sonne:/ # /sbin/init.d/i4l_hardware start Loading ISDN drivers ... Loading HiSax driver ...
<--snipp--> Sollte das die Reihenfolge sein in der du startest, kann das auch nicht klappen, erst aktiviertst du Software die auf Hardwaretreibern aufsetzt, die noch garnicht vorhanden sind, weil du sie erst danach startest, also: rci4l_hardware start rci4l start ist die richtige Reihenfolge. So wirds auch vom INITscript aufgerufen. cu Gerald
Hallo Liste, hallo Jan, Jan Tim Schueszler wrote:
Hallo,
Bisher starte ich das ISDN-System manuell:
sonne:/ # /sbin/init.d/i4l start Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added
<-- snipp--> <--snipp-->
sonne:/ # /sbin/init.d/i4l_hardware start Loading ISDN drivers ... Loading HiSax driver ...
<--snipp--> Sollte das die Reihenfolge sein in der du startest, kann das auch nicht klappen, erst aktiviertst du Software die auf Hardwaretreibern aufsetzt, die noch garnicht vorhanden sind, weil du sie erst danach startest, also: rci4l_hardware start rci4l start ist die richtige Reihenfolge. So wirds auch vom INITscript aufgerufen. cu Gerald
participants (3)
-
Gerald Goebel
-
Jan Tim Schueszler
-
Karsten Keil