Hi Liste, sorry wegen der vielen Mails, aber Probleme mit Windoof ... habe bis jetzt alle geposteten Möglichkeiten probiert, aber keine Chance ... Kann sein, daß ich mich zu bloed anstelle !!!! Ich danke für weitere Hilfe schon mal im voraus !!! Hier nun nochmal meine Dateien gepostet:
ls -l /etc/ppp
total 21 lrwxrwxrwx 1 root root 7 Oct 14 01:41 auth-down -> auth-up -rwxr-x--x 1 root root 469 Mar 6 1998 auth-up -rw------- 1 root root 177 Nov 11 18:25 chap-secrets -rw-r--r-- 1 root root 0 Nov 11 19:08 dir -rw-r--r-- 1 root root 1897 Apr 4 1999 ibod.cf -rw-r----- 1 root root 281 Nov 11 03:54 ioptions -rw-r----- 1 root root 1395 Nov 11 05:08 ioptions.YaST lrwxrwxrwx 1 root root 5 Oct 14 01:41 ip-down -> ip-up -rwxr-x--x 1 root root 3031 Jul 18 1998 ip-up -rw-r--r-- 1 root root 5908 Apr 4 1999 options -rw-r----- 1 root root 1395 Nov 11 04:30 options.ippp0 -rw------- 1 root root 1145 Nov 11 18:26 pap-secrets -rw------- 1 root root 0 Oct 28 21:24 pap-secrets.new drwxr-xr-x 2 root root 1024 Oct 14 01:44 peers
/etc/ppp/chap-secrets
# Secrets for authentication using CHAP # client server secret IP addresses "micky2309@planet-interkom.de" * "xxxxxxxx" "*" micky2309@planet-interkom.de "xxxxxxxxx"
/etc/ppp/pap-secrets
# Secrets for authentication using PAP # client server secret IP addresses # OUTBOUND CONNECTIONS # Here you should add your userid password to connect to your providers via # pap. The * means that the password is to be used for ANY host you connect # to. Thus you do not have to worry about the foreign machine name. Just # replace password with your password. # If you have different providers with different passwords then you better # remove the following line. #hostname * password # INBOUND CONNECTIONS #client hostname <password> 192.168.1.1 # If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, # all users in /etc/passwd can use their password for pap-authentication. # # Every regular user can use PPP and has to use passwords from /etc/passwd #* hostname "" # UserIDs that cannot use PPP at all. Check your /etc/passwd and add any # other accounts that should not be able to use pppd! Replace hostname # with your local hostname. #guest hostname "*" - #master hostname "*" - #root hostname "*" - #support hostname "*" - #stats hostname "*" - "suse" * "linux" "micky2309@planet-interkom.de" * "xxxxxxxxxx"
/etc/ppp/ioptions
# /etc/ppp/ioptions # for isdn4linux/syncPPP global options for ipppd # # # Klaus Franken, kfr@suse.de # Version: 15.05.97 (5.0) # # lock # Set 'debug' to create a lot of information in /var/log/messages debug # Set '+pwlog' for logging passwords in /var/log/messages +pwlog
/etc/ppp/ioptions.YAST
# /etc/ppp/options.ippp? # # for isdn4linux/syncPPP and dynamic IP-numbers # # # Klaus Franken, kfr@suse.de # Version: 27.08.97 (5.1) # # This file is copy by YaST from /etc/ppp/ioptions.YaST # to options.<device> # The device(s) # for more than one device try: # /dev/ippp0 /dev/ippp1 ... /dev/ippp0 # The IP addresses: <local>:<remote> # just "0.0.0.0:" or nothing for dynamic IP #0.0.0.0: # my user name user "micky2309@planet-interkom.de" # my system name (only for CHAP!) # name my_system_name # accept IP addresses from peer # use with dynamic IP ipcp-accept-local ipcp-accept-remote noipdefault # try to get IP address from interface # option specific to ipppd (as opposed to pppd) # use only with static IP #useifip # disable all header-compression -vj -vjccomp -ac -pc -bsdcomp # sometimes you need this: #noccp # max receive unit mru 1524 # max transmit unit mtu 1500 # If this machine is a server, force authentication by uncommenting one # of the following. However, if this machine is a client, doing this will # prevent a succesful connection! (message "peer refused to authenticate"). # So, only uncomment on a server. # "+pap" / "+chap" NUR AKTIVIEREN, WENN DIES EIN SERVER IST!!! #+pap #+chap # if you have problems with handshaking (no response for first # lcp-package) try to decrease the retry-cycle. Default is 3 sec, # try for example 2 sec: # lcp-restart 2
/etc/ppp/options
# to <n>. #remotename <n> # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. {proxyarp,noproxyarp} noproxyarp # Use the system password database for authenticating the peer using # PAP. Note: mgetty already provides this option. If this is specified # then dialin from users using a script under Linux to fire up ppp wont work. #login # If this option is given, pppd will send an LCP echo-request frame to # the peer every n seconds. Under Linux, the echo-request is sent when # no packets have been received from the peer for n seconds. Normally # the peer should respond to the echo-request by sending an echo-reply. # This option can be used with the lcp-echo-failure option to detect # that the peer is no longer connected. #lcp-echo-interval 30 # If this option is given, pppd will presume the peer to be dead if n # LCP echo-requests are sent without receiving a valid LCP echo-reply. # If this happens, pppd will terminate the connection. Use of this # option requires a non-zero value for the lcp-echo-interval parameter. # This option can be used to enable pppd to terminate after the physical # connection has been broken (e.g., the modem has hung up) in # situations where no hardware modem control lines are available. #lcp-echo-failure 4 # Specifies that pppd should disconnect if the link is idle for n seconds. #idle 600 # Disable the IPXCP and IPX protocols. noipx # Disable VJ novj novjccomp # ---<End of File>---
/etc/ppp/options.ippp0
# /etc/ppp/options.ippp? # # for isdn4linux/syncPPP and dynamic IP-numbers # # # Klaus Franken, kfr@suse.de # Version: 27.08.97 (5.1) # # This file is copy by YaST from /etc/ppp/ioptions.YaST # to options.<device> # The device(s) # for more than one device try: # /dev/ippp0 /dev/ippp1 ... /dev/ippp0 # The IP addresses: <local>:<remote> # just "0.0.0.0:" or nothing for dynamic IP #0.0.0.0: # my user name user "micky2309@planet-interkom.de" # my system name (only for CHAP!) # name my_system_name # accept IP addresses from peer # use with dynamic IP ipcp-accept-local ipcp-accept-remote noipdefault # try to get IP address from interface # option specific to ipppd (as opposed to pppd) # use only with static IP #useifip # disable all header-compression -vj -vjccomp -ac -pc -bsdcomp # sometimes you need this: #noccp # max receive unit mru 1524 # max transmit unit mtu 1500 # If this machine is a server, force authentication by uncommenting one # of the following. However, if this machine is a client, doing this will # prevent a succesful connection! (message "peer refused to authenticate"). # So, only uncomment on a server. # "+pap" / "+chap" NUR AKTIVIEREN, WENN DIES EIN SERVER IST!!! #+pap #+chap # if you have problems with handshaking (no response for first # lcp-package) try to decrease the retry-cycle. Default is 3 sec, # try for example 2 sec: # lcp-restart 2