Hallo Leute. Wer hat viel Erfahrung mit SuSE 7.0 mit Fritz-Classic (ISA) Karten? Ich bekomme folgende Fehlermeldung, wenn meine Karte sich rauswählen möchte: Apr 25 20:31:24 marvin kernel: OPEN: 192.168.1.100 -> 140.84.4.202 UDP, port: 61020 -> 53 Apr 25 20:31:24 marvin kernel: ippp0: dialing 1 010280192347... Apr 25 20:31:24 marvin isdnlog: Apr 25 20:31:24 * tei 99 calling +49 102801923, with msn_1 RING (Data) Apr 25 20:31:26 marvin isdnlog: Apr 25 20:31:26 tei 99 calling +49 102801923, with msn_1 Time:Wed Apr 25 21:28:00 2001 Apr 25 20:31:26 marvin isdnlog: Apr 25 20:31:26 tei 99 calling +49 102801923, with msn_1 CONNECT (Data) Apr 25 20:31:26 marvin isdnlog: Apr 25 20:31:26 tei 99 calling +49 102801923, with msn_1 Unknown provider ??? (-1) Apr 25 20:31:27 marvin ipppd[1626]: Local number: 7450801, Remote number: 010280192347, Type: outgoing Apr 25 20:31:27 marvin ipppd[1626]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 Apr 25 20:31:27 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:27 marvin kernel: isdn_net: ippp0 connected Apr 25 20:31:29 marvin kernel: isdn_tx_timeout dev ippp0 dialstate 0 Apr 25 20:31:30 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:39 marvin last message repeated 3 times Apr 25 20:31:39 marvin kernel: eth0: transmit timed out, status 007b, resetting. Apr 25 20:31:42 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:44 marvin kernel: isdn_tx_timeout dev ippp0 dialstate 0 Apr 25 20:31:45 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:48 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:51 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:54 marvin ipppd[1626]: sent [0][LCP ConfReq id=0x1 <mru 1524> <magic 0xa778cb4>] Apr 25 20:31:57 marvin ipppd[1626]: LCP: timeout sending Config-Requests Apr 25 20:31:57 marvin ipppd[1626]: Connection terminated. Apr 25 20:31:57 marvin ipppd[1626]: taking down PHASE_DEAD link 0, linkunit: 0 Apr 25 20:31:57 marvin ipppd[1626]: LCP is down Apr 25 20:31:57 marvin ipppd[1626]: closing fd 7 from unit 0 Apr 25 20:31:57 marvin ipppd[1626]: link 0 closed , linkunit: 0 Apr 25 20:31:57 marvin ipppd[1626]: reinit_unit: 0 Apr 25 20:31:57 marvin ipppd[1626]: Connect[0]: /dev/ippp0, fd: 7 Ich habe schon alles erdenkliche probiert, wäre schön, wenn Ihr mir helfen könntet. Viele Grüße, Martin. -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net