AW: [suse-isdn] RE: [x] - RE: [suse-isdn] Probs mit ps2pdf unter 9.1

4 Nov 2004

      Hallo Christian,
dachte ich hätte es ziemlich genau beschrieben:
Was ist das unten für eine Datei?
Soll das die FaxDispatch-Datei sein?
Dann ist die Geschichte unter 9.1 wieder mal ganz anders als unter
9.0?!!?!?!
Wenn ja, dann setze FILETYPE=pdf; mal in die erste Zeile und probiere es
aus.
Würde mich interessieren ob das so tut.
Hylafax läuft hier unter 9.0.

Gruß,

Michael

-----Ursprüngliche Nachricht-----
Von: Christian Schmidt [mailto:linux@web-maxx.de]
Gesendet: Donnerstag, 4. November 2004 18:11
An: 'Michael Conrad'; suse-isdn@suse.com
Betreff: [suse-isdn] RE: [x] - RE: [suse-isdn] Probs mit ps2pdf unter
9.1

Hallo Michael,

bei mir sieht die Datei wie folgt aus:

if [ "$7" != "" ]; then
    PHONEMATCH=$7\$
    USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"`
    if [ "$USERENTRY" != "" ]; then
	USERNAME=`echo $USERENTRY | awk '{print $1}'`
	SENDTO="$USERNAME"
    fi
fi

Soll ich FILETYPE=pdf; in die erste Zeile setzen?

Danke und Gruß
Christian
...
-----Original Message-----
From: Michael Conrad [mailto:michael_conrad@conradconsulting.de]
Sent: Thursday, November 04, 2004 6:10 PM
To: Christian Schmidt; suse-isdn@suse.com
Subject: AW: [x] - RE: [suse-isdn] Probs mit ps2pdf unter 9.1
Hallo Christian,
habe dein Problem gefunden.
Du mußt unter faxrcvd in der Zeile Filetype=Tif setzen, nicht pdf!!!!!
Das email-forwarding als .pdf machst du über die Datei
FaxDispatch (auch in /bin).
Dort gibst du Filetype=pdf an.
Siehe unten:
#
# Dispatch fax to email depending on own MSN or extention
(ISDN lines) # sourced from faxrcvd
FILETYPE=pdf;
SENDTO=FaxMaster,Micha;
Gruß,
Michael
-----Ursprüngliche Nachricht-----
Von: Christian Schmidt [mailto:linux@web-maxx.de]
Gesendet: Donnerstag, 4. November 2004 17:13
An: 'Michael Conrad'; suse-isdn@suse.com
Betreff: [x] - RE: [suse-isdn] Probs mit ps2pdf unter 9.1
Hallo,
die Datei sieht wie folgt aus:
--------------Schnipp-------------
#! /bin/sh
#	$Id: faxrcvd.sh.in,v 1.9 2003/02/09 02:39:33 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics # # Permission
to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without
fee, provided # that (i) the above copyright notices and this
permission notice appear in # all copies of the software and
related documentation, and (ii) the names of # Sam Leffler
and Silicon Graphics may not be used in any advertising or #
publicity relating to the software without the specific,
prior written # permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF
ANY KIND, # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY # WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE
FOR # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OF ANY KIND, # OR ANY DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR PROFITS, # WHETHER OR NOT ADVISED
OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF #
LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE # OF THIS SOFTWARE.
#
#
# faxrcvd file devID commID error-msg
#
if [ $# -lt 4 ]; then
    echo "Usage: $0 file devID commID error-msg [CIDNumber]
[CIDName] [destination]"
    exit 1
fi
test -f etc/setup.cache || {
    SPOOL=`pwd`
    cat<<EOF
FATAL ERROR: $SPOOL/etc/setup.cache is missing!
The file $SPOOL/etc/setup.cache is not present.  This
probably means the machine has not been setup using the
faxsetup(8C) command.  Read the documentation on setting up
HylaFAX before you startup a server system.
EOF
    exit 1
}
. etc/setup.cache
INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
ENCODING=base64
TIFF2PS=tiff2ps
PS2PDF=ps2pdf
TOADDR=FaxMaster
TIFFINFO=tiffinfo
NOTIFY_FAXMASTER=always
#
# wraper for base64 encoding
#
# first try uuencode if it is not installed fallback to #
metamails mimencode if it is also not installed give an #
error message # function base64 {
if [ -x /usr/bin/uuencode ]; then
        /usr/bin/uuencode -m $1 $1 | /usr/bin/sed '1d;$d'
    elif [ -x /usr/bin/mimencode ]; then
        /usr/bin/mimencode $1
    else
        echo "Error: No encoder for base64 found."
        echo "Please install sharutils or metamail."
    fi
}
#
# Permit various types of attachment types: ps, tif, pdf #
Note that non-ASCII filetypes require sharutils or metamail.
# pdf requires tiff2ps and ps2pdf
#
#FILETYPE=pdf -----hier tif setzen also
FILETYPE=tif
#
# There is no good portable way to find out the fully
qualified # domain name (FQDN) of the host or the TCP port
for the hylafax # service so we fudge here.  Folks may want
to tailor this to # their needs; e.g. add a domain or use
localhost so the loopback # interface is used.
#
HOSTNAME=`hostname`			# XXX no good way to find FQDN
PORT=4559				# XXX no good way to
lookup service
FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"
CIDNUMBER="$5"
CIDNAME="$6"
FILENAME=`echo $FILE | $SED -e 's/\.tif//' -e 's/recvq\///'`
if [ -f $FILE ]; then
    #
    # Check the sender's TSI and setup to dispatch
    # facsimile received from well-known senders.
    #
    SUBADDR="`$INFO $FILE | $AWK -F: '/SubAddr/ { print $2 }'
2>/dev/null`"
    SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }'
2>/dev/null`"
    SENDTO=
    if [ -f bin/FaxDispatch ]; then
  . bin/FaxDispatch	# NB: FaxDispatch sets SENDTO
based on $7
    fi
    #
    # Don't send FaxMaster duplicates, and FaxMaster may not even
    # want a message at all, depending on NOTIFY_FAXMASTER.
    #
    case $NOTIFY_FAXMASTER$MSG in
  never*)		NOTIFY_FAXMASTER=no;;
  errors)		NOTIFY_FAXMASTER=no;;
  *)		NOTIFY_FAXMASTER=yes;;
    esac
    if [ "$TOADDR" != "$SENDTO" -a "$NOTIFY_FAXMASTER" != "no" ]; then
  (echo "To: $TOADDR"
   echo "From: The HylaFAX Receive Agent <fax>"
   echo "Subject: Facsimile received from $SENDER";
   echo ""
   echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
  echo "ReceivedOn: $DEVICE"
  if [ "$MSG" ]; then
      echo ""
      echo "The full document was not received because:"
      echo ""
      echo "    $MSG"
      echo ""
      echo "    ---- Transcript of session follows ----"
      echo ""
      if [ -f log/c$COMMID ]; then
      $SED -e '/-- data/d' \
       -e '/start.*timer/d' -e '/stop.*timer/d' \
       log/c$COMMID
      elif [ -n "$COMMID" ]; then
      echo "    No transcript available (CommID c$COMMID)."
      else
      echo "    No transcript available."
      fi
  else
      echo "    CommID: c$COMMID
(ftp://$HOSTNAME:$PORT/log/c$COMMID)"
  fi
  if [ "$CIDNUMBER" ]; then
      echo " CIDNumber: $CIDNUMBER"
  fi
  if [ "$CIDNAME" ]; then
      echo "   CIDName: $CIDNAME"
  fi
  if [ -n "$SENDTO" ]; then
      echo ""
      echo "The facsimile was automatically dispatched
to: $SENDTO."
  fi
  ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
    fi
    if [ -n "$SENDTO" ]; then
  (MIMEBOUNDARY="NextPart$$"
   echo "Mime-Version: 1.0"
   echo "Content-Type: Multipart/Mixed;
Boundary=\"$MIMEBOUNDARY\""
   echo "Content-Transfer-Encoding: 7bit"
   echo "To: $SENDTO"
   echo "From: The HylaFAX Receive Agent <fax>"
   echo "Subject: Facsimile received from $SENDER";
   echo ""
   echo "--$MIMEBOUNDARY"
   echo "Content-Type: text/plain; charset=us-ascii"
   echo "Content-Transfer-Encoding: 7bit"
   echo ""
   echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
   echo "ReceivedOn: $DEVICE"
   if [ "$MSG" ]; then
      echo ""
      echo "The full document was not received because:"
      echo ""
      echo "    $MSG"
      echo ""
      echo "    ---- Transcript of session follows ----"
      echo ""
      if [ -f log/c$COMMID ]; then
      $SED -e '/-- data/d' \
           -e '/start.*timer/d' -e '/stop.*timer/d' \
           log/c$COMMID
      elif [ -n "$COMMID" ]; then
      echo "    No transcript available (CommID c$COMMID)."
      else
      echo "    No transcript available."
      fi
   else
      echo "    CommID: c$COMMID
(ftp://$HOSTNAME:$PORT/log/c$COMMID)"
   fi
   if [ "$CIDNUMBER" ]; then
      echo " CIDNumber: $CIDNUMBER"
   fi
   if [ "$CIDNAME" ]; then
      echo "   CIDName: $CIDNAME"
   fi
   echo ""
   echo "--$MIMEBOUNDARY"
   if [ "$FILETYPE" = "tif" ]; then
       echo "Content-Type: image/tiff; name=\"$FILENAME.tif\""
       echo "Content-Description: FAX document"
       echo "Content-Transfer-Encoding: $ENCODING"
       echo "Content-Disposition: attachment;
filename=\"$FILENAME.tif\""
       echo ""
       base64 $FILE 2>/dev/null
   elif [ "$FILETYPE" = "pdf" ]; then
       echo "Content-Type: application/pdf; name=\"c$COMMID.pdf\""
       echo "Content-Description: FAX document"
       echo "Content-Transfer-Encoding: $ENCODING"
       echo "Content-Disposition: attachment;
filename=\"c$COMMID.pdf\""
       echo ""
       GW=`$TIFFINFO $FILE | $GREP "Image Width" | \
      $SED 's/.*Image Width: \([0-9]*\).*/\1/g' |
sort -n | $SED -n '$p'`
       GL=`$TIFFINFO $FILE | $GREP "Image Length" | \
      $SED 's/.*Image Length: \([0-9]*\).*/\1/g' |
sort -n | $SED -n '$p'`
       RW=`$TIFFINFO $FILE | $GREP "Resolution" | \
      $SED 's/.*Resolution: \([0-9]*\).*/\1/g' | sort
-n | $SED -n '$p'`
       RL=`$TIFFINFO $FILE | $GREP "Resolution" | \
      $SED 's/.*Resolution: [0-9]*,
\([0-9]*\).*/\1/g' | sort -n | $SED -n '$p'`
       $TIFF2PS -a -O $FILE.ps $FILE 2>/dev/null # fax2ps
looks bad
       $PS2PDF -g$GW\x$GL -r$RW\x$RL $FILE.ps $FILE.pdf
2>/dev/null
       base64 $FILE.pdf 2>/dev/null
       $RM -f $FILE.ps $FILE.pdf 2>/dev/null
   else #  default as Postscript
       echo "Content-Type: application/postscript;
name=\"$FILENAME.ps\""
       echo "Content-Description: FAX document"
       echo "Content-Transfer-Encoding: 7bit"
       echo "Content-Disposition: attachment;
filename=\"$FILENAME.ps\""
       echo ""
       $FAX2PS $FILE 2>/dev/null
   fi
   echo ""
   echo "--$MIMEBOUNDARY--"
  ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
    fi
else
    #
    # Generate notification mail for a failed attempt.
    #
    (echo "To: $TOADDR"
     echo "From: The HylaFAX Receive Agent <fax>"
     echo "Subject: facsimile not received"
     echo ""
     echo "An attempt to receive facsimile on $DEVICE failed because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
  $SED -e '/-- data/d' \
       -e '/start.*timer/d' -e '/stop.*timer/d' \
      log/c$COMMID
     elif [ -n "$COMMID" ]; then
  echo "    No transcript available (CommID c$COMMID)."
     else
  echo "    No transcript available."
     fi
    ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR fi
--------------Schnapp-------------
Gruß
Christian
...
-----Original Message-----
From: Michael Conrad [mailto:michael_conrad@conradconsulting.de]
Sent: Thursday, November 04, 2004 5:08 PM
To: Christian Schmidt; suse-isdn@suse.com
Subject: AW: [suse-isdn] Probs mit ps2pdf unter 9.1
Hallo Christian,
kommt mir bekannt vor.
Hast du auch alle notwendigen files installiert?
Wie sieht folgend Datei aus:
/var/spool/fax/bin/faxrcvd
Gruß,
Michael
-----Ursprüngliche Nachricht-----
Von: Christian Schmidt [mailto:linux@web-maxx.de]
Gesendet: Donnerstag, 4. November 2004 15:27
An: suse-isdn@suse.com
Betreff: [suse-isdn] Probs mit ps2pdf unter 9.1
Hallo,
ich habe Hylafax auf meinem Server installiert und lasse dort die
eingehenden Faxe mittels ps2pdf in ein PDF umwandeln und als Mail
verschicken.
Ich kann die verschickten PDFs aber nicht öffnen, der
Acrobat Reader
meldet:
'Dateityp nicht unterstützt oder beschädigt...'
Die Datei hat auch nur eine Größe von 100 Byte Kennt jemand dieses
Problem?
Christian
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
    suse-isdn-unsubscribe@suse.com
Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie
eine Mail an: suse-isdn-help@suse.com
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
    suse-isdn-unsubscribe@suse.com
Um eine Liste aller verfügbaren Kommandos zu bekommen,
schicken Sie eine Mail an: suse-isdn-help@suse.com
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
    suse-isdn-unsubscribe@suse.com
Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken
Sie eine Mail an: suse-isdn-help@suse.com