HallloWalter, und alle andere! jetzt bin ich so weit dir den Inhalt von ax25 Dateien zusenden: ------------------------------- ax25-up ------------------------------ #!/bin/bash # Version = ax25-config-0.3.3 # Startkiss # Firmware-TNCs in den KISS-Modus schalten #stty 19200 < /dev/ttyS1 #echo -e "\r\033@K1\r" > /dev/ttyS1 #sleep 3 # # KISS-Modul einbinden modprobe ax25; modprobe mkiss # # KISS-Gerät an /dev/ttyS1 als Port kiss anbinden /usr/sbin/kissattach /dev/ttyS1 kiss 44.130.54.201 # Parameter einstellen: P=128, W=10, TX-Delay=150 /usr/sbin/kissparms -p kiss -r 128 -s 10 -l 20 -t 150 echo 100 > /proc/sys/net/ax25/ax0/t1_timeout echo 30 > /proc/sys/net/ax25/ax0/t2_timeout echo 30000 > /proc/sys/net/ax25/ax0/t3_timeout echo 10 > /proc/sys/net/ax25/ax0/maximum_retry_count echo 4 > /proc/sys/net/ax25/ax0/standard_window_size echo 256 > /proc/sys/net/ax25/ax0/maximum_packet_length # Endkiss # StartARNM /usr/sbin/axparms -route add kiss default db0wbd -ipmode vc # weitere Routen: /sbin/arp -H ax25 -f /etc/ax25/arptab /sbin/route del -net 44.0.0.0 netmask 255.0.0.0 ax0 /sbin/route add -net 44.0.0.0 netmask 255.0.0.0 irtt 8000 ax0 # Gateways: /sbin/route add -net 44.130.54.0 netmask 255.255.255.0 gw 44.130.54.200 irtt 12 000 ax0 echo 1 >/proc/sys/net/ax25/ax0/ip_default_mode # # Start AX25 routing daemon /usr/sbin/ax25rtd & echo $! > /var/run/ax25rtd.pid # # Monitor auf Terminal 11 starten /usr/bin/listen -artc > /dev/tty11 & echo $! > /var/run/listen.pid # EndARNM ---------------------------------------- "ax25-config-kiss" ---------------------------------------- # # Don't add lines in this file, these will be lost next time you # Use the ax25-config utility. # Changes of existing lines will *not* being lost. Rufzeichen="hb9irb-0" Modem="kiss" Ax25Device="kiss" NetDevice="ax0" KernelModules="ax25;mkiss" TxDelay="150" TxTail="20" Persistance="128" SlotTime="10" Paclen="256" MaxFrame="4" T1="100" T2="30" T3="30000" Retry="10" IpNr="44.130.54.201" Netmask="255.0.0.0" Broadcast="44.255.255.255" Port="/dev/ttyS1" SoftDcd="" Baudrate="19200" Bitrate="9600" IoBase="" Irq="" IntExt="" Clk="" Divider="" ChipClock="" Type="" ClockSource="" Mode="" StartAx25d="n" TcpIp="n" Zugang="n" GastName="no" BenutzerGruppe="nogroup" BenutzerHome="/tmp" DMA="1" PTT="" PTT="" START_AX25RTD="yes" START_NETROM="" START_NODE="" NetRomCall="" NetRomAlias="" START_NETROMD="" Gateway="db0wbd" GatewayAx25Path="" GatewayARP="" dns="" DataA="" DataB="" ctrlA="" ctrlB="" MIX="" Pipe="" kjd="" --------------------------------------- "axports" --------------------------------------- # /etc/ax25/axports #Name Call Baudrate PacLen MaxFrame Beschreibung kiss hb9irb-0 19200 256 4 kiss-19200 Bd --------------------------------------- "gatewaytab" ---------------------------------------- # Gateways: /sbin/route add -net 44.130.54.0 netmask 255.255.255.0 gw 44.130.54.200 irtt 12 000 @ND@ --------------------------------------- "ax25rtd.conf" --------------------------------------- # created from ax25-config ax25-maxroutes 256 ip-maxroutes 256 # Startkiss [kiss] ip-learn-routes yes ip-adjust-mode no arp-add yes # Endkiss --------------------------------------- "ax25-down" --------------------------------------- #!/bin/bash # # Einen eventuell laufenden ax25d beenden if [ -e /var/run/ax25d.pid ]; then killall ax25d rm -f /var/run/ax25d.pid fi # Einen eventuell laufenden ax25rtd beenden if [ -e /var/run/ax25rtd.pid ]; then killall ax25rtd rm -f /var/run/ax25rtd.pid fi # Monitor beenden if [ -e /var/run/listen.pid ]; then killall listen rm -f /var/run/listen.pid fi echo "$(ls /proc/sys/net/ax25)" > /tmp/ax25-config.tmp read Auswahl < /tmp/ax25-config.tmp i=0 while [ "$Auswahl" != "" ] do let i=i+1 awk ' NR == '$i' { print $1 }' /tmp/ax25-config.tmp > /tmp/ax25-config-tmp read Auswahl < /tmp/ax25-config-tmp if [ "$Auswahl" != "" ]; then ifconfig "$Auswahl" down fi done # Startkiss killproc -KILL /usr/sbin/kissattach > /dev/null modprobe -r mkiss; modprobe -r ax25 > /dev/null # Endkiss --------------------------------------- --------------------------------------- Das waers alles, diese Dateien sind alles von "ax25config" generiert worden. Ein Ping sowie ein HTTP Verbidung zu IP 44.130.54.200 ist leider gemess diese Konfiguration nicht möglich. Danke und 73 de Pasquale