[opensuse-gnome] Murrine GTK engine issues?!
Hey, Have to start of with that im not sure wether to post this into opensuse-gnome or opensuse-factory. Thats why i sent to both lists. I seem to have some problems with the Murrine engine in 11.3+Factory Tested. Among others, the gnome panel has some issues, see attached image. The white border on the marked "urxvt" is not supposed to be there. The same problem occurs if i use the default Sonar theme. There the border is like light-green, not white. It was Not like that when i had a default 11.3 installation. I have Tried to compile murrine from source, but still, looks weird. I have tried other engines, like equin-eh whatever its called. and That one looks okey. Not sure howto "debug" it, or where to look for error messages. I Also see problems with the progressbar in Transmission-gtk, where it looks way off, like if it was 16 colors or something. I have tried googling and looking at the openSUSE forums, but so far, no go... Anyone experience the same problems and/or has some good ideas on howto get around them? br /smurfd
I'm a ATI user and ATI drivers have some strange problems with gaussian blurs amongst other things. This looks more like a compositing problem than a murrine problem from a ATI user perspective. NM On Wed, Feb 2, 2011 at 12:32 PM, smurfd <smurfd@gmail.com> wrote:
Hey,
Have to start of with that im not sure wether to post this into opensuse-gnome or opensuse-factory. Thats why i sent to both lists.
I seem to have some problems with the Murrine engine in 11.3+Factory Tested.
Among others, the gnome panel has some issues, see attached image. The white border on the marked "urxvt" is not supposed to be there. The same problem occurs if i use the default Sonar theme. There the border is like light-green, not white. It was Not like that when i had a default 11.3 installation.
I have Tried to compile murrine from source, but still, looks weird. I have tried other engines, like equin-eh whatever its called. and That one looks okey.
Not sure howto "debug" it, or where to look for error messages.
I Also see problems with the progressbar in Transmission-gtk, where it looks way off, like if it was 16 colors or something. I have tried googling and looking at the openSUSE forums, but so far, no go...
Anyone experience the same problems and/or has some good ideas on howto get around them?
br /smurfd
-- nelson marques nmo.marques@gmail.com -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-gnome+help@opensuse.org
Hey, Well, im using Nvidia, but sure .. could be something with that, so ill try to update/downgrade the driver im using... The driver im using now is at version : 260.19.29-22.1 Thanks, ill give it a try! On Wed, Feb 2, 2011 at 5:31 PM, Nelson Marques <nmo.marques@gmail.com> wrote:
I'm a ATI user and ATI drivers have some strange problems with gaussian blurs amongst other things. This looks more like a compositing problem than a murrine problem from a ATI user perspective.
NM
On Wed, Feb 2, 2011 at 12:32 PM, smurfd <smurfd@gmail.com> wrote:
Hey,
Have to start of with that im not sure wether to post this into opensuse-gnome or opensuse-factory. Thats why i sent to both lists.
I seem to have some problems with the Murrine engine in 11.3+Factory Tested.
Among others, the gnome panel has some issues, see attached image. The white border on the marked "urxvt" is not supposed to be there. The same problem occurs if i use the default Sonar theme. There the border is like light-green, not white. It was Not like that when i had a default 11.3 installation.
I have Tried to compile murrine from source, but still, looks weird. I have tried other engines, like equin-eh whatever its called. and That one looks okey.
Not sure howto "debug" it, or where to look for error messages.
I Also see problems with the progressbar in Transmission-gtk, where it looks way off, like if it was 16 colors or something. I have tried googling and looking at the openSUSE forums, but so far, no go...
Anyone experience the same problems and/or has some good ideas on howto get around them?
br /smurfd
-- nelson marques nmo.marques@gmail.com
-- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-gnome+help@opensuse.org
Hmm first of i noticed that i only used /etc/X11/xorg.conf.d/ and no /etc/X11/xorg.conf file.. so i will try when i get home to use a /etc/X11/xorg.conf file from a previous install created by nvidia-xconfig to see how it looks... On Thu, Feb 3, 2011 at 8:45 AM, smurfd <smurfd@gmail.com> wrote:
Hey,
Well, im using Nvidia, but sure .. could be something with that, so ill try to update/downgrade the driver im using... The driver im using now is at version : 260.19.29-22.1
Thanks, ill give it a try!
On Wed, Feb 2, 2011 at 5:31 PM, Nelson Marques <nmo.marques@gmail.com> wrote:
I'm a ATI user and ATI drivers have some strange problems with gaussian blurs amongst other things. This looks more like a compositing problem than a murrine problem from a ATI user perspective.
NM
On Wed, Feb 2, 2011 at 12:32 PM, smurfd <smurfd@gmail.com> wrote:
Hey,
Have to start of with that im not sure wether to post this into opensuse-gnome or opensuse-factory. Thats why i sent to both lists.
I seem to have some problems with the Murrine engine in 11.3+Factory Tested.
Among others, the gnome panel has some issues, see attached image. The white border on the marked "urxvt" is not supposed to be there. The same problem occurs if i use the default Sonar theme. There the border is like light-green, not white. It was Not like that when i had a default 11.3 installation.
I have Tried to compile murrine from source, but still, looks weird. I have tried other engines, like equin-eh whatever its called. and That one looks okey.
Not sure howto "debug" it, or where to look for error messages.
I Also see problems with the progressbar in Transmission-gtk, where it looks way off, like if it was 16 colors or something. I have tried googling and looking at the openSUSE forums, but so far, no go...
Anyone experience the same problems and/or has some good ideas on howto get around them?
br /smurfd
-- nelson marques nmo.marques@gmail.com
-- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-gnome+help@opensuse.org
Sadly there was no luck ... still the same. And i tried, it uses the xorg.conf before the xorg.conf.d folder.... On Thu, Feb 3, 2011 at 12:51 PM, smurfd <smurfd@gmail.com> wrote:
Hmm first of i noticed that i only used /etc/X11/xorg.conf.d/ and no /etc/X11/xorg.conf file.. so i will try when i get home to use a /etc/X11/xorg.conf file from a previous install created by nvidia-xconfig to see how it looks...
On Thu, Feb 3, 2011 at 8:45 AM, smurfd <smurfd@gmail.com> wrote:
Hey,
Well, im using Nvidia, but sure .. could be something with that, so ill try to update/downgrade the driver im using... The driver im using now is at version : 260.19.29-22.1
Thanks, ill give it a try!
On Wed, Feb 2, 2011 at 5:31 PM, Nelson Marques <nmo.marques@gmail.com> wrote:
I'm a ATI user and ATI drivers have some strange problems with gaussian blurs amongst other things. This looks more like a compositing problem than a murrine problem from a ATI user perspective.
NM
On Wed, Feb 2, 2011 at 12:32 PM, smurfd <smurfd@gmail.com> wrote:
Hey,
Have to start of with that im not sure wether to post this into opensuse-gnome or opensuse-factory. Thats why i sent to both lists.
I seem to have some problems with the Murrine engine in 11.3+Factory Tested.
Among others, the gnome panel has some issues, see attached image. The white border on the marked "urxvt" is not supposed to be there. The same problem occurs if i use the default Sonar theme. There the border is like light-green, not white. It was Not like that when i had a default 11.3 installation.
I have Tried to compile murrine from source, but still, looks weird. I have tried other engines, like equin-eh whatever its called. and That one looks okey.
Not sure howto "debug" it, or where to look for error messages.
I Also see problems with the progressbar in Transmission-gtk, where it looks way off, like if it was 16 colors or something. I have tried googling and looking at the openSUSE forums, but so far, no go...
Anyone experience the same problems and/or has some good ideas on howto get around them?
br /smurfd
-- nelson marques nmo.marques@gmail.com
-- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-gnome+help@opensuse.org
participants (2)
-
Nelson Marques -
smurfd