[opensuse-gnome] Using Yast with QT GUI
Hi list, Wonder if are there any hopes to have back the QT Yast GUI working in current and next openSUSE releases, as it was before. In my humble opinion the actual Yast GUI (which if I'm not wrong is gtk based) looks uglier in comparison to QT version. Thanks. Regards, -- Marco Calistri (amdturion) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
On Tue, 2014-05-13 at 12:08 -0300, Marco Calistri wrote:
Hi list,
Wonder if are there any hopes to have back the QT Yast GUI working in current and next openSUSE releases, as it was before.
In my humble opinion the actual Yast GUI (which if I'm not wrong is gtk based) looks uglier in comparison to QT version.
Thanks.
Regards,
-- Marco Calistri (amdturion)
I'm not sure I understand.. in openSUSE 13.1 we have both the QT UI and the GTK one.. Can you explain what you mean, perhaps with screenshots just so I can be sure what you're talking about? :) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Il 13/05/2014 12:17, Richard Brown ha scritto:
On Tue, 2014-05-13 at 12:08 -0300, Marco Calistri wrote:
Hi list,
Wonder if are there any hopes to have back the QT Yast GUI working in current and next openSUSE releases, as it was before.
In my humble opinion the actual Yast GUI (which if I'm not wrong is gtk based) looks uglier in comparison to QT version.
Thanks.
Regards,
-- Marco Calistri (amdturion)
I'm not sure I understand.. in openSUSE 13.1 we have both the QT UI and the GTK one..
Can you explain what you mean, perhaps with screenshots just so I can be sure what you're talking about? :)
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all. See you later. Cheers, -- Marco Calistri (amdturion) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Il 13/05/2014 17:22, Marco Calistri ha scritto:
Il 13/05/2014 12:17, Richard Brown ha scritto:
On Tue, 2014-05-13 at 12:08 -0300, Marco Calistri wrote:
Hi list,
Wonder if are there any hopes to have back the QT Yast GUI working in current and next openSUSE releases, as it was before.
In my humble opinion the actual Yast GUI (which if I'm not wrong is gtk based) looks uglier in comparison to QT version.
Thanks.
Regards,
-- Marco Calistri (amdturion)
I'm not sure I understand.. in openSUSE 13.1 we have both the QT UI and the GTK one..
Can you explain what you mean, perhaps with screenshots just so I can be sure what you're talking about? :)
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers,
Please read and comment this link containing: https://news.opensuse.org/2013/10/10/coming-soon-opensuse-13-1-with-yast-in-... -- Marco Calistri (amdturion) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode? -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Le mercredi 14 mai 2014 à 00:43 +0200, Richard Brown a écrit :
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine
You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode?
Nope, only Qt5 is needed these days ;) (but I'm still not convinced from the superiority of Qt5 for YaST on a GNOME desktop). -- Frederic Crozat Project Manager Enterprise Desktop SUSE -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2014-05-14 09:04, Frederic Crozat wrote:
Nope, only Qt5 is needed these days ;) (but I'm still not convinced from the superiority of Qt5 for YaST on a GNOME desktop).
The OP probably refers to the different functionality of the yast modules for software management and software updates, which are very different in the GTK version. I like and use YaST GTK, but I do need and use the QT version instead for those two modules. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlNzVOYACgkQja8UbcUWM1zwSAEAkYhz8kOuraEkx6iMjMneKHsA yvGpp3GhrnoLz3hEDXUA/jXSUs/AJA0NnNdCd83OdNiPQPhTcbza+Gt2kReYZO99 =0hN+ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Il 13/05/2014 19:43, Richard Brown ha scritto:
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine
You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode?
Hi have full KDE DE installed on my system. Hope to test again Yast within Friday. Regards, -- Marco Calistri (amdturion) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Il 14/05/2014 11:55, Marco Calistri ha scritto:
Il 13/05/2014 19:43, Richard Brown ha scritto:
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine
You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode?
Hi have full KDE DE installed on my system.
Hope to test again Yast within Friday.
Regards,
Please look at the error: https://flic.kr/p/nDz2qn In my system is not working! -- Marco Calistri opensuse 13.1 (Bottle) 64 bit - Kernel 3.11.10-7-default Gnome 3.10.1 Intel® Core™ i5-2410M CPU @ 2.30GHz × 4 - Intel® Sandybridge Mobile -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
On Wed, 2014-05-14 at 22:24 -0300, Marco Calistri wrote:
Il 14/05/2014 11:55, Marco Calistri ha scritto:
Il 13/05/2014 19:43, Richard Brown ha scritto:
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine
You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode?
Hi have full KDE DE installed on my system.
Hope to test again Yast within Friday.
Regards,
Please look at the error:
In my system is not working!
As the error message states "Check the Log File".. any clues in the yast logs?
-- Marco Calistri opensuse 13.1 (Bottle) 64 bit - Kernel 3.11.10-7-default Gnome 3.10.1 Intel® Core™ i5-2410M CPU @ 2.30GHz × 4 - Intel® Sandybridge Mobile
-- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
Il 15/05/2014 05:45, Richard Brown ha scritto:
On Wed, 2014-05-14 at 22:24 -0300, Marco Calistri wrote:
Il 14/05/2014 11:55, Marco Calistri ha scritto:
Il 13/05/2014 19:43, Richard Brown ha scritto:
On 13 May 2014 22:22, Marco Calistri <marco.calistri@yahoo.com.br> wrote:
I will provide a screenshot as soon I will be in my home but the fact is that by using Yast itself to choice the default preferred GUI for Yast and by setting it to be QT then Yast GUI doesn't works at all.
See you later.
Cheers, -- Marco Calistri (amdturion) --
I've just tested it..and it works fine
You do realise you'll need KDE installed (at least KDE base) in order to run YaST in QT mode?
Hi have full KDE DE installed on my system.
Hope to test again Yast within Friday.
Regards,
Please look at the error:
In my system is not working!
As the error message states "Check the Log File".. any clues in the yast logs?
-- Marco Calistri opensuse 13.1 (Bottle) 64 bit - Kernel 3.11.10-7-default Gnome 3.10.1 Intel® Core™ i5-2410M CPU @ 2.30GHz × 4 - Intel® Sandybridge Mobile
It was a missing lib, as I wrote in other reply, very strange that I have not received any dependencies warnings. Finally the problem has been solved! Thank you. Cheers, -- Marco Calistri (amdturion) -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-gnome+owner@opensuse.org
participants (4)
-
Carlos E. R. -
Frederic Crozat -
Marco Calistri -
Richard Brown