Hi. What could be wrong with bootsplash in Gnome LiveCD Reloaded (openSUSE-11.1-GNOME-Reloaded-LiveCD.i686-0.0.2-Build1.3). Although everything seems to be set correct, bootsplash isn´t displayed, only the boot messages. I do not know what may be the problem, why it doesn´t work. Or is it disabled on purpose? Here you are outputs menu.lst, bootsplash and mkinitrd. output menu.lst # Modified by YaST2. Last modification on Sun Jun 21 08:32:23 EDT 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,1)/boot/message ##YaST - activate ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.1 root (hd0,1) kernel /boot/vmlinuz-2.6.27.23-0.1-default root=/dev/sda2 resume=/dev/sda1 splash=silent showopts initrd /boot/initrd-2.6.27.23-0.1-default output bootsplash linux-n0c1:/etc/sysconfig # cat bootsplash ## Path: System/Boot ## Description: enables/disables bootup graphics ## Type: yesno ## Default: yes # # SPLASH can be set to "no" to turn off the splash-screen on console 1 # at boot time (after kernel load). # # SPLASH=no to disable the splash screen # # SPLASH=yes to show the splash screen # SPLASH="yes" ## Path: System/Boot ## Description: selects bootsplash graphics theme ## Type: string ## Default: "" # # Bootsplash theme. Should be based in /etc/bootsplash/themes/. # THEME="openSUSE" output mkinitrd linux-n0c1:/etc/sysconfig # mkinitrd Kernel image: /boot/vmlinuz-2.6.27.23-0.1-default Initrd image: /boot/initrd-2.6.27.23-0.1-default Root device: /dev/sda2 (mounted on / as ext3) Resume device: /dev/sda1 Kernel Modules: hwmon thermal_sys processor thermal fan jbd mbcache ext3 scsi_mod scsi_transport_spi mptbase mptscsih mptspi edd crc-t10dif sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1024x768) 24249 blocks -- S pozdravom / Best regards, Rasto -- To unsubscribe, e-mail: opensuse-gnome+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-gnome+help@opensuse.org