[openFATE 305403] Bootloader beep configuration
Feature changed by: Maximilian Maher (maxmaher) Feature #305403, revision 21 Title: Bootloader beep configuration Hackweek IV: Done Priority Requester: Desirable Projectmanager: Desirable openSUSE-11.2: Done Priority Requester: Desirable Projectmanager: Desirable Requested by: Jiri Srain (jsrain) Description: Allow to configure whether the acoustic signal should be used for installed bootloader. Acoustic signal is valuable for visually impaired people, while it may be disturbing e.g. in libraries. Test Case: - Try to configure acoustic signal with yastbootloader module. + Call Yast Bootloader Module and try to configure the Acoustic Signal's + with it. Discussion: #1: Jiri Srain (jsrain) (2008-11-12 15:58:43) Default can be set depending on whether braille display was found or whether text-to-speech in isolinux was used. #2: Stefan Behlert (sbehlert) (2008-11-12 17:15:07) Is this feature meant as 'allow atuomatic setting of'? The beep is afaik already configurable to be 'off'. If not, this would be a bug. #3: Stefan Seyfried (seife) (2008-11-12 18:09:40) Please reject this feature. This is seriously overengineered. The beep now defaults to off int the installed system. If somebody wants to enable it, he can do so with gfxboot --change-config "boot::beep=1" Marco only needs to document that for his customers and everything is fine. Please, no YaST module for that. #4: Jiri Srain (jsrain) (2008-11-13 09:39:44) (reply to #3) It's not about a new module, just about a check box in the bootloader configuration. #5: Jiri Srain (jsrain) (2009-06-01 11:38:11) (reply to #4) Jozo, please, find a reasonable location for the check box. #6: Jozef Uhliarik (juhliarik) (2009-06-25 10:37:14) Steffen how can I obtain info about status of "beep" from gfxboot? I know how to switch on/off option but I need also status. Please let me know. #7: Steffen Winterfeldt (snwint) (2009-06-25 11:40:48) (reply to #6) You can't. If you have an INF file parser, you can run 'gfxboot --show- config' and get the value from there. #8: Jozef Uhliarik (juhliarik) (2009-07-27 16:54:15) done in yast2-bootloader 2.18.11 -- openSUSE Feature: https://features.opensuse.org/305403
participants (1)
-
fate_noreply@suse.de