Feature changed by: Vladimir Botka (vbotka) Feature #306418, revision 6 Title: Bluetooth configuration via YaST openSUSE-11.2: Evaluation Priority Requester: Important openSUSE-11.3: Unconfirmed Priority Requester: Important Requested by: Joop Boonen (worldcitizen) Description: Corrently is rather complex for a newbee to configue for instance a gps receiver that is connected via bluetooth. Configure /etc/bluetooth/rfcomm.conf rfcomm bind rfcomm0 start gpsd /dev/rfcomm0 It would be helpful is bluetooth and bluetooth devices could be configured via YaST. + Discussion: + #1: Vladimir Botka (vbotka) (2009-06-05 17:09:56) + There are 2 subjects here, which should not be put together 1. + bluetooth configuration 2. gpsd configuration + I strongly disagree to put the Bluetooth configuration into the YaST. + At present the Bluetooth configuration is done via Bluetooth Applet. To + create another point of configuration will increase the complexity and + increase the possibility of an error. The simplicity should be the main + goal nowadays to keep the system maintainable. + If rfcomm GUI is required the “Bluetooth Applet → Preferences” is the + right place. -- openSUSE Feature: https://features.opensuse.org/306418