[opensuse-factory] Install DVD ISO Leap Tumbleweed
Hello, last weekend i like to install a new Version of Leap and later Tumbleweed but this is not possible ? I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode. With the 13.2 ISO I have no Problems? are the new Leap and tumbleweed ISO broken ? -- mit freundlichen Grüßen / best regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
* Günther J. Niederwimmer
last weekend i like to install a new Version of Leap and later Tumbleweed but this is not possible ?
I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode.
I last installed Tw on a laptop about six months ago by following the instructions on https://en.opensuse.org/openSUSE:Tumbleweed_installation I downloaded the livd cd, burned the iso to a usb stick, .. Now memory is cloudy, but booted from the stick. Cannot remember procedure to allow starting system from stick using efi. Then installed Tw from the live image. You don't say how you proceeded. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
* Patrick Shanahan
* Günther J. Niederwimmer
[11-10-15 10:13]: last weekend i like to install a new Version of Leap and later Tumbleweed but this is not possible ?
I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode.
I last installed Tw on a laptop about six months ago by following the instructions on https://en.opensuse.org/openSUSE:Tumbleweed_installation
I downloaded the livd cd, burned the iso to a usb stick, .. Now memory is cloudy, but booted from the stick. Cannot remember procedure to allow starting system from stick using efi.
Then installed Tw from the live image.
You don't say how you proceeded.
ps: The iso may still be broken, I don't know. It was remarked early October that the iso's were not installable. ?? But, it may be easier to install 13.2 and change repos to Tw and: zypper ref;zypper -v dup -d then zypper -v dup I always download completely in advance and believe it protects me from changed curl/zypper/rpm library changes that could ruin the upgrade. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
best way to instal leap and tw is download netinstal iso ( leap or
tumble) , dd if=...iso of=/dev/usbflash
boot from usb flash in efi mode and begin install
On 10 November 2015 at 16:58, Patrick Shanahan
* Patrick Shanahan
[11-10-15 10:51]: * Günther J. Niederwimmer
[11-10-15 10:13]: last weekend i like to install a new Version of Leap and later Tumbleweed but this is not possible ?
I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode.
I last installed Tw on a laptop about six months ago by following the instructions on https://en.opensuse.org/openSUSE:Tumbleweed_installation
I downloaded the livd cd, burned the iso to a usb stick, .. Now memory is cloudy, but booted from the stick. Cannot remember procedure to allow starting system from stick using efi.
Then installed Tw from the live image.
You don't say how you proceeded.
ps: The iso may still be broken, I don't know. It was remarked early October that the iso's were not installable. ??
But, it may be easier to install 13.2 and change repos to Tw and: zypper ref;zypper -v dup -d then zypper -v dup
I always download completely in advance and believe it protects me from changed curl/zypper/rpm library changes that could ruin the upgrade.
-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Wed, Nov 11, 2015 at 02:53:41PM +0100, Ondřej Súkup wrote:
best way to instal leap and tw is download netinstal iso ( leap or tumble) , dd if=...iso of=/dev/usbflash
best way to install openSUSE is just to boot installation kernel and initrd with `install=' parametr pointing to nearest network repository mirror. Cheers, S_W
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-) You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ... Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Hello, Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible. I can't see anything ? only the cursor is on. -- mit freundlichen Grüßen / best regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tue, 10 Nov 2015 17:26:44 +0100
Günther J. Niederwimmer
Hello,
Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible.
I can't see anything ? only the cursor is on.
Can you get at least to EFI shell? then probably some EFI debugging is needed to check what can be wrong. Like if DVD is seen, turn on some debugging and more. Josef -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Dienstag, 10. November 2015, 17:29:27 schrieb Josef Reidinger:
On Tue, 10 Nov 2015 17:26:44 +0100
Günther J. Niederwimmer
wrote: Hello,
Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible.
I can't see anything ? only the cursor is on.
Can you get at least to EFI shell? then probably some EFI debugging is needed to check what can be wrong. Like if DVD is seen, turn on some debugging and more.
But the 13.2 is "normal" installing (secure Boot enabled) what is so different ? -- mit freundlichen Grüssen / best regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tue, 10 Nov 2015 17:55:14 +0100
Günther J. Niederwimmer
Am Dienstag, 10. November 2015, 17:29:27 schrieb Josef Reidinger:
On Tue, 10 Nov 2015 17:26:44 +0100
Günther J. Niederwimmer
wrote: Hello,
Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible.
I can't see anything ? only the cursor is on.
Can you get at least to EFI shell? then probably some EFI debugging is needed to check what can be wrong. Like if DVD is seen, turn on some debugging and more.
But the 13.2 is "normal" installing (secure Boot enabled)
what is so different ?
Problem can be new shim as mentioned below, also some changes in EFI handling code or whatever, really hard to quess it without debugging. Josef -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tue, Nov 10, 2015 at 06:03:20PM +0100, Josef Reidinger wrote:
On Tue, 10 Nov 2015 17:55:14 +0100 Günther J. Niederwimmer
wrote: Am Dienstag, 10. November 2015, 17:29:27 schrieb Josef Reidinger:
On Tue, 10 Nov 2015 17:26:44 +0100
Günther J. Niederwimmer
wrote: Hello,
Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible.
I can't see anything ? only the cursor is on.
Can you get at least to EFI shell? then probably some EFI debugging is needed to check what can be wrong. Like if DVD is seen, turn on some debugging and more.
But the 13.2 is "normal" installing (secure Boot enabled)
what is so different ?
Problem can be new shim as mentioned below, also some changes in EFI handling code or whatever, really hard to quess it without debugging.
If you hit the problem with Secure Boot turned ON, then it was most likely the new shim upgrade with new openSSL patch that crashes on some hardware models. https://bugzilla.opensuse.org/show_bug.cgi?id=950569 Thanks, Michael
Josef -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
10.11.2015 19:26, Günther J. Niederwimmer пишет:
Hello,
Am Dienstag, 10. November 2015, 17:09:36 schrieb Bernhard Voelker:
On 11/10/2015 04:06 PM, Günther J. Niederwimmer wrote:
[...] but it is NOT possible to install this versions in EFI Mode.
The reasons for "not possible" vary from CD medium error, installer crashes, power outage, house burnt down, "I was on holiday" ... to general galaxy expansion issues. ;-)
You didn't tell us what you were trying to do, and what you got exactly, so I wouldn't expect too precise answers ...
I can't tell anything, I burn the DVD's and make a start from this DVD's but the System crash, only a reset is possible.
I can't see anything ? only the cursor is on.
Is secure boot enabled? Try to disable it. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Günther J. Niederwimmer writes:
I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode.
You may be affected by this bug: http://bugzilla.opensuse.org/show_bug.cgi?id=950569 Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Q+, Q and microQ: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (9)
-
Achim Gratz
-
Andrei Borzenkov
-
Bernhard Voelker
-
Günther J. Niederwimmer
-
Josef Reidinger
-
Michael Chang
-
Ondřej Súkup
-
Patrick Shanahan
-
Tomáš Čech