[opensuse-factory] beta4 intel hda sound hangs/crashes
I'm using a beta4 64bit DVD for installation on a FSC Scenic W620 Pentium4 computer. I checked the media - its ok. Tried the installation 3 times and every time it hangs/stops/freezes at some point. For example now it hangs (mouse movement ok, but nothing else happens) in the "configuring sound" screen. After basic installation it started the kernel without reboot. The dmesg output looks like this. Michael Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.4-2-default (geeko@buildhost) (gcc version 4.3.3 20081002 (prerelease) [gcc-4_3-branch revision 140831] (SUSE Linux) ) #1 SMP 2008-10-28 22:32:39 +0100 Command line: root=/dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ1UL422693-part6 resume=/dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ1UL422693-part5 splash=silent showopts vga=0x31a KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable) BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data) BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) last_pfn = 0x3f6f0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 init_memory_mapping 0000000000 - 003f600000 page 2M 003f600000 - 003f6f0000 page 4k kernel direct mapping tables up to 3f6f0000 @ 8000-b000 last_map_addr: 3f6f0000 end: 3f6f0000 RAMDISK: 3f0dd000 - 3f6e4f06 DMI present. ACPI: RSDP 000F7210, 0024 (r2 PTLTD ) ACPI: XSDT 3F6F68DF, 0044 (r1 PTLTD XSDT 50000 LTP 0) ACPI: FACP 3F6F6997, 00F4 (r3 FSC �������� 50000 F4240) ACPI: DSDT 3F6F6A8B, 44AB (r1 FSC D2334 50000 MSFT 2000002) ACPI: FACS 3F6FBFC0, 0040 ACPI: MCFG 3F6FAF36, 0040 (r1 PTLTD MCFG 50000 LTP 0) ACPI: APIC 3F6FAF76, 0062 (r1 FSC APIC 50000 CSF 0) ACPI: BOOT 3F6FAFD8, 0028 (r1 PTLTD $SBFTBL$ 50000 LTP 1) ACPI: DMI detected: Fujitsu Siemens No NUMA configuration found Faking a node at 0000000000000000-000000003f6f0000 Bootmem setup node 0 0000000000000000-000000003f6f0000 NODE_DATA [0000000000009000 - 000000000001dfff] bootmap [000000000001e000 - 0000000000025edf] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003f6f0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000b52af8] TEXT DATA BSS ==> [0000200000 - 0000b52af8] #3 [003f0dd000 - 003f6e4f06] RAMDISK ==> [003f0dd000 - 003f6e4f06] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f71b0] 000f71b0 [ffffe20000000000-ffffe20000ffffff] PMD -> [ffff880001200000-ffff8800021fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0003f6f0 On node 0 totalpages: 259726 DMA zone: 1446 pages, LIFO batch:0 DMA32 zone: 251732 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0xf008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) PERCPU: Allocating 61600 bytes of per cpu data NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 253178 Policy zone: DMA32 Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ1UL422693-part6 resume=/dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ1UL422693-part5 splash=silent showopts vga=0x31a bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 3391.450 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Memory: 1006468k/1039296k available (2725k kernel code, 32436k reserved, 2609k data, 1460k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 6782.90 BogoMIPS (lpj=13565800) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal LVT vector (0xfa) already installed using mwait in idle threads. ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 553 Objects with 57 Devices 125 Methods 26 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0079 [00] enable : System is already in ACPI mode Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12468638 Detected 12.468 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6782.99 BogoMIPS (lpj=13565980) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7010600070106, new 0x7010600070106 CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (13565.89 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 net_namespace: 1936 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 10 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:....................................................................................................................... Initialized 23/26 Regions 12/12 Fields 42/42 Buffers 42/42 Packages (562 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 3 _STA executions (examined 61 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 10 PCI: MCFG area at d0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at d0000000 - d0afffff ACPI: Device [PS2M] status [00000008]: functional but not present; setting present ACPI: Device [LPT] status [00000008]: functional but not present; setting present ACPI: Device [ECP] status [00000008]: functional but not present; setting present ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [f0080000, f00fffff] PCI: 0000:00:02.0 reg 14 io port: [1000, 1007] PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0040000, f007ffff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0000000, f0003fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [2400, 241f] PCI: 0000:00:1d.1 reg 20 io port: [2800, 281f] PCI: 0000:00:1d.2 reg 20 io port: [2c00, 2c1f] PCI: 0000:00:1d.3 reg 20 io port: [3000, 301f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0004000, f00043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [3800, 380f] PCI: 0000:00:1f.2 reg 10 io port: [3830, 3837] PCI: 0000:00:1f.2 reg 14 io port: [3824, 3827] PCI: 0000:00:1f.2 reg 18 io port: [3828, 382f] PCI: 0000:00:1f.2 reg 1c io port: [3820, 3823] PCI: 0000:00:1f.2 reg 20 io port: [3810, 381f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [3400, 341f] PCI: 0000:0b:04.0 reg 10 io port: [4000, 40ff] PCI: 0000:0b:04.0 reg 14 32bit mmio: [f0100000, f01000ff] pci 0000:0b:04.0: supports D1 pci 0000:0b:04.0: supports D2 pci 0000:0b:04.0: PME# supported from D1 D2 D3hot D3cold pci 0000:0b:04.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [4000, 4fff] PCI: bridge 0000:00:1e.0 32bit mmio: [f0100000, f01fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:01: ioport range 0xcb0-0xcbb has been reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xf000-0xf07f has been reserved system 00:03: ioport range 0xf100-0xf10f has been reserved system 00:03: ioport range 0xf180-0xf1bf has been reserved system 00:03: ioport range 0x800-0x87f has been reserved system 00:03: ioport range 0xf820-0xf82f has been reserved system 00:03: ioport range 0xfe00-0xfe00 has been reserved system 00:03: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:03: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:03: iomem range 0xfebfc000-0xfebfffff has been reserved system 00:03: iomem range 0xfed13000-0xfed13fff has been reserved system 00:03: iomem range 0xfed14000-0xfed17fff has been reserved system 00:03: iomem range 0xfed18000-0xfed18fff has been reserved system 00:03: iomem range 0xfed19000-0xfed19fff has been reserved system 00:03: iomem range 0xd0000000-0xdfffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1e.0: IO window: 0x4000-0x4fff pci 0000:00:1e.0: MEM window: 0xf0100000-0xf01fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [0, 0] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [0, 0] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 0b index 0 io port: [4000, 4fff] bus: 0b index 1 mmio: [f0100000, f01fffff] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 io port: [0, ffff] bus: 0b index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 6175k freed Simple Boot Flag at 0x69 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1225969497.676:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 494 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20001080000, using 7872k, total 7872k vesafb: mode is 1280x1024x16, linelength=2560, pages=1968 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 208945 bytes bootsplash: ...found (1280x1024, 220863 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver8 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A i8042 aux: probe of 00:09 failed with error -16 PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 TCP cubic registered registered taskstats version 1 Freeing unused kernel memory: 1460k freed Write protecting the kernel read-only data: 5012k processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3800-0x3807 ide1: BM-DMA at 0x3808-0x380f Probing IDE interface ide0... hda: PHILIPS DROM6216, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ACPI: No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT A disabled ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x3830 ctl 0x3824 bmdma 0x3810 irq 18 ata2: SATA max UDMA/133 cmd 0x3828 ctl 0x3820 bmdma 0x3818 irq 18 ata1.00: failed to set max address (err_mask=0x1) ata1.00: device aborted resize (139338758 -> 156301488), skipping HPA handling ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7 ata1.00: 139338758 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: ATA-7: SAMSUNG HD160JJ, ZM100-41, max UDMA7 ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found udevd version 128 started usbcore: registered new interface driver usbfs sd 0:0:0:0: [sda] 139338758 512-byte hardware sectors: (71.3GB/66.4GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 usbcore: registered new interface driver hub sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usbcore: registered new device driver usb sd 0:0:0:0: [sda] 139338758 512-byte hardware sectors: (71.3GB/66.4GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 USB Universal Host Controller Interface driver v3.0 sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB) ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000 sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice sdb:<6>hub 1-0:1.0: USB hub found sdb1 sdb2 sdb3 <<6>hub 1-0:1.0: 8 ports detected sdb5 sdb6 sdb7 > sd 1:0:0:0: [sdb] Attached SCSI disk usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.4-2-default ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.4-2-default uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.4-2-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002c00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.4-2-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 20, io base 0x00003000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.4-2-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb 4-2: configuration #1 chosen from 1 choice usb 4-2: New USB device found, idVendor=046d, idProduct=c504 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB Receiver usb 4-2: Manufacturer: Logitech PM: Starting manual resume from disk usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input1 input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input2 input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. udevd version 128 started sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 input: PC Speaker as /devices/platform/pcspkr/input/input3 agpgart-intel 0000:00:00.0: Intel 915G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 intel_rng: FWH not detected ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 ACPI: Power Button (CM) [PWRB] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded vendor=8086 device=244e r8169 0000:0b:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth0: RTL8110s at 0xffffc200001ec000, 00:30:05:d4:d3:ff, XID 04000000 IRQ 19 hda: ATAPI 16X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 parport_pc 00:0b: activated parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 iTCO_vendor_support: vendor-support=0 parport_pc 00:0c: activated parport_pc 00:0c: reported by Plug and Play ACPI parport1: PC-style at 0x278 (0x678), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0xf060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs ppdev: user-space parallel port driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/patch_realtek.c:5535: hda_codec: Unknown model for ALC260, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3051: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3055: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3056: mono: mono_out=0x11 ALSA sound/pci/hda/hda_codec.c:3064: inputs: mic=0x12, fmic=0x13, line=0x14, fline=0x0, cd=0x0, aux=0x0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: [<ffffffffa02f748f>] alc_mic_automute+0x28/0xd5 [snd_hda_intel] PGD 3cce4067 PUD 3c915067 PMD 0 Oops: 0000 [1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:0b:04.0/net/eth0/ifindex CPU 0 Modules linked in: snd_hda_intel(+) ppdev snd_pcm snd_timer snd_page_alloc snd_hwdep iTCO_wdt iTCO_vendor_support i2c_i801 snd rtc_cmos parport_pc ide_cd_mod r8169 rtc_core container soundcore rtc_lib parport cdrom button intel_agp pcspkr i2c_core sg usbhid hid ff_memless uhci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ata_generic ata_piix pata_acpi libata scsi_mod dock piix ide_core thermal processor thermal_sys hwmon Supported: Yes Pid: 764, comm: modprobe Not tainted 2.6.27.4-2-default #1 RIP: 0010:[<ffffffffa02f748f>] [<ffffffffa02f748f>] alc_mic_automute+0x28/0xd5 [snd_hda_intel] RSP: 0018:ffff88003e051cc8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000f09 RDX: ffff88003e0ee800 RSI: ffff88003ccb2200 RDI: ffff88003cd30800 RBP: ffff88003e0ee810 R08: 0000000000000000 R09: ffff88003cd30800 R10: 0000000000000000 R11: ffffffff8036b179 R12: ffff88003cd30800 R13: ffff88003e0ee800 R14: ffff88003cd30800 R15: ffffffffa032dbf0 FS: 00007fb3d0eca6f0(0000) GS:ffffffff80846a00(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000003e159000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 764, threadinfo ffff88003e050000, task ffff88003e15e3c0) Stack: 0000000000000001 ffff88003e0ee810 ffff88003cd30800 ffff88003e0ee800 ffffffffa032dd70 ffffffffa02f600a 0000000000000000 ffff88003cd30800 0000000000000000 ffff88003d9c18c0 ffffffffa032dd70 ffffffffa03098a3 Call Trace: [<ffffffffa02f600a>] alc_init+0xb6/0xc1 [snd_hda_intel] [<ffffffffa03098a3>] snd_hda_build_controls+0x46/0x8b [snd_hda_intel] [<ffffffffa03097ca>] azx_probe+0xff/0x192 [snd_hda_intel] [<ffffffff8037955a>] pci_device_probe+0xbb/0x108 [<ffffffff803ecb2f>] really_probe+0xdd/0x1e5 [<ffffffff803ecd1c>] __driver_attach+0x46/0x6d [<ffffffff803ec2c1>] bus_for_each_dev+0x44/0x78 [<ffffffff803ebba7>] bus_add_driver+0xef/0x235 [<ffffffff803ecee0>] driver_register+0xa2/0x11f [<ffffffff80379802>] __pci_register_driver+0x5d/0x8f [<ffffffff80209041>] _stext+0x41/0x11d [<ffffffff8026523e>] sys_init_module+0xa0/0x1ba [<ffffffff8020c37a>] system_call_fastpath+0x16/0x1b [<00007fb3d0a423ba>] 0x7fb3d0a423ba Code: ff ff c3 41 56 45 31 c0 b9 09 0f 00 00 49 89 fe 41 55 41 54 55 53 48 8b 97 88 00 00 00 48 8b 82 00 01 00 00 0f b7 9a 4a 03 00 00 <44> 0f b7 28 0f b7 82 4c 03 00 00 31 d2 89 de 8d 68 e8 e8 e8 8e RIP [<ffffffffa02f748f>] alc_mic_automute+0x28/0xd5 [snd_hda_intel] RSP <ffff88003e051cc8> CR2: 0000000000000000 ---[ end trace 9047d95a7ccec4f4 ]--- Adding 2104472k swap on /dev/sdb5. Priority:-1 extents:1 across:2104472k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sdb7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1225969510.456:2): operation="profile_load" name="/bin/ping" name2="default" pid=1686 type=1505 audit(1225969510.484:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1715 type=1505 audit(1225969510.548:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1720 type=1505 audit(1225969510.592:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1740 type=1505 audit(1225969510.636:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1753 type=1505 audit(1225969510.692:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1764 type=1505 audit(1225969510.732:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1775 type=1505 audit(1225969510.800:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1781 type=1505 audit(1225969510.876:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1786 type=1505 audit(1225969510.916:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1801 NET: Registered protocol family 10 lo: Disabled Privacy Extensions r8169: eth0: link up st: Version 20080504, fixed bufsize 32768, s/g segs 256 eth0: no IPv6 routers present ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 usb 1-1: new high speed USB device using ehci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: New USB device found, idVendor=0411, idProduct=0098 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: USB Flash Disk usb 1-1: Manufacturer: BUFFALO usb 1-1: SerialNumber: A700000000001215 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning scsi 2:0:0:0: Direct-Access BUFFALO USB Flash Disk 4000 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdc] 8028160 512-byte hardware sectors: (4.11GB/3.82GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdc] Assuming drive cache: write through sd 2:0:0:0: [sdc] 8028160 512-byte hardware sectors: (4.11GB/3.82GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (1)
-
Michael Born