Got a problem with my external USB Harddisk (Storagebird, 1TB). The kernel (2.6.31-rc7-4-default, 32bit) detects the disc, but does immediately an device reset. After that, the device doesn't show up any more in lsusb and must be powercycled. Happens with the machines direct USB ports and USB hub. [ 187.108207] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 14 [ 187.217072] usb 1-2.1.1: New USB device found, idVendor=152d, idProduct=2329 [ 187.217113] usb 1-2.1.1: New USB device strings: Mfr=10, Product=11, SerialNumber=3 [ 187.217153] usb 1-2.1.1: Product: Storagebird 35EV821 [ 187.217188] usb 1-2.1.1: Manufacturer: 0123456 [ 187.217222] usb 1-2.1.1: SerialNumber: 00000000008C [ 187.217473] usb 1-2.1.1: configuration #1 chosen from 1 choice [ 187.221326] scsi5 : SCSI emulation for USB Mass Storage devices [ 187.221735] usb-storage: device found at 14 [ 187.221742] usb-storage: waiting for device to settle before scanning [ 190.220753] scsi 5:0:0:0: Direct-Access WDC WD10 EAVS-00D7B0 PQ: 0 ANSI: 2 CCS [ 190.221170] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 190.221988] usb-storage: device scan complete [ 190.232450] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 190.233843] sd 5:0:0:0: [sdd] Write Protect is off [ 190.233861] sd 5:0:0:0: [sdd] Mode Sense: 34 00 00 00 [ 190.233865] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 190.235351] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 190.235371] sdd: sdd1 [ 190.245178] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 190.245196] sd 5:0:0:0: [sdd] Attached SCSI disk [ 190.428207] usb 1-2.1.1: reset high speed USB device using ehci_hcd and address 14 [ 190.528209] usb 1-2.1.1: device descriptor read/64, error -71 [ 190.732203] usb 1-2.1.1: device descriptor read/64, error -71 However, booting a SLED11 (2.6.27.29-0.1-pae) doesn't show this behavior, the disc is working fine. https://bugzilla.novell.com/show_bug.cgi?id=536457 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org