Hi, I just did a fresh install of Alpha2 on a real machine (laptop Acer Aspire 3022WLMi) and the installer shows unresolvable conflicts on package selection: kdeaddons3 kdeaddons3-kate kdeaddons3-konqueror kdeaddons3-kicker ... YaST did not recognize my RTL8169 nic, alpha1 did. But on boot it is shown. Firewall is disabled (maybe because there was no nic found) wlan BCM4318 is not supported as in alpha1 internal modem (snd-atiixp-sound) not recognized (well it never works, but 10.0 or Alpha1 found the device) YaST says: "Warnung: TV-Karten koennen nicht ueberprueft werden" (Warning: Cannot check for TV cards) The xorg.conf file that was generated by YaST is really funny: Lot's of "vmware" entries and totally unuseable for my ATI X600 PCIE graphics. YaST did not show up the sshd on networkinstall, but it is started. Well, rebooting...without framebuffer (deleted vga=0x317) Graphics did not start. So: Switching to runlevel 3 and trying to configure my graphics via "sax2": sax2 starts, shows the background and a mousecursor and after 10 seconds it dies. Ok, I read the SaX.log...GLX not loaded. I opened xorg.conf...the file is changed! Only "wrong" entry now, the max resolution (800x600), so I changed it to 1280x800. If I run as root "X" an empty xserver starts up and stay. "rckdm restart" chrashes: linux kdm: :0[4882]: Abnormal termination of greeter for display :0, code 125, signal 0 I set DISPLAYMANAGER="xdm" in /etc/sysconfig/displaymanager rcxdm works, but if I log in as user I end up with an empty desktop and a moveable mouse.In my process list I see: kdeinit Running... dcopserver [kdeinit] --nosid klauncher [kdeinit] kaccess [kdeinit] kwrapper ksmserver ksmserver [kdeinit] kio_file [kdeinit] file .... klipper [kdeinit] suseplugger [kdeinit] -caption knotify [kdeinit] kded kded drkonqi -display :0.0 --appname kded --signal 11 .... The last process (drkonqi) repeats endless, kded chrashes again and again. Next try: wmaker...also chrashes Next try: twm...works Well _this_ seems to be a real "alpha"-version! :-) -- mdc
On Saturday 22 October 2005 14:45, meister@netz00.com wrote:
Hi,
I just did a fresh install of Alpha2 on a real machine (laptop Acer Aspire 3022WLMi) and the installer shows unresolvable conflicts on package selection: kdeaddons3 kdeaddons3-kate kdeaddons3-konqueror kdeaddons3-kicker ...
known issue, should be fixed in the next days in Edge.
YaST did not recognize my RTL8169 nic, alpha1 did. But on boot it is shown. Firewall is disabled (maybe because there was no nic found) wlan BCM4318 is not supported as in alpha1 internal modem (snd-atiixp-sound) not recognized (well it never works, but 10.0 or Alpha1 found the device)
YaST says: "Warnung: TV-Karten koennen nicht ueberprueft werden" (Warning: Cannot check for TV cards)
I have seen as well, no idea yet.
YaST did not show up the sshd on networkinstall, but it is started.
Well, rebooting...without framebuffer (deleted vga=0x317) Graphics did not start. So: Switching to runlevel 3 and trying to configure my graphics via "sax2": sax2 starts, shows the background and a mousecursor and after 10 seconds it dies.
fontconfig issue
Ok, I read the SaX.log...GLX not loaded. I opened xorg.conf...the file is changed! Only "wrong" entry now, the max resolution (800x600), so I changed it to 1280x800.
If I run as root "X" an empty xserver starts up and stay. "rckdm restart" chrashes: linux kdm: :0[4882]: Abnormal termination of greeter for display :0, code 125, signal 0
also the mentioned fontconfig problem, run fc-cache -f as root and all the apps will suddenly work again. The "Most Annoying Bug" page is such a great read :) bye adrian -- Adrian Schroeter SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany email: adrian@suse.de
Am Samstag 22 Oktober 2005 15:07 schrieb Adrian Schroeter <adrian@suse.de>:
On Saturday 22 October 2005 14:45, meister@netz00.com wrote:
I just did a fresh install of Alpha2 on a real machine (laptop Acer Aspire 3022WLMi) and the installer shows unresolvable conflicts on known issue, should be fixed in the next days in Edge.
Hi Adrian, so I will wait...
... Switching to runlevel 3 and trying to configure my graphics via "sax2": sax2 starts, shows the background and a mousecursor and after 10 seconds it dies. fontconfig issue .. If I run as root "X" an empty xserver starts up and stay. "rckdm restart" chrashes: linux kdm: :0[4882]: Abnormal termination of greeter for display :0, code 125, signal 0 also the mentioned fontconfig problem, run fc-cache -f as root and all the apps will suddenly work again.
Yes, that did it. :-) But not all appps works: YaST->Hardware->Information shown nothing and the log says: Arch.ycp:308: Couldn't find an agent to handle '.probe.is_uml' Well I think that is also the reason, why YaST did not find the sound. Selecting the right module in the sound configuration of YaST works.
The "Most Annoying Bug" page is such a great read :)
Ok, blame on me, I did not read it before posting. -- mdc
On Saturday 22 October 2005 15:57, meister@netz00.com wrote:
<adrian@suse.de>:
On Saturday 22 October 2005 14:45, meister@netz00.com wrote: ...
also the mentioned fontconfig problem, run fc-cache -f as root and all the apps will suddenly work again.
Yes, that did it. :-) But not all appps works: YaST->Hardware->Information shown nothing and the log says: Arch.ycp:308: Couldn't find an agent to handle '.probe.is_uml'
hm, yast2-hardware-detection rpm is installed ? bye adrian -- Adrian Schroeter SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany email: adrian@suse.de
Am Samstag 22 Oktober 2005 16:04 schrieb Adrian Schroeter <adrian@suse.de>:
But not all appps works: YaST->Hardware->Information shown nothing and the log says: Arch.ycp:308: Couldn't find an agent to handle '.probe.is_uml' hm, yast2-hardware-detection rpm is installed ?
Hi Adrian, due to a bug in kmail 1.8 my answer got lost. Here it is again:
no, it isn't. By why not? I did a normal install. Booted from CD1, selected fresh install, choose kde. A dependency is missing than. This might be worse a bug report for for the YaST people.
-- mdc
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 meister@netz00.com escribió:
Hi,
I just did a fresh install of Alpha2 on a real machine (laptop Acer Aspire 3022WLMi) and the installer shows unresolvable conflicts on package selection: kdeaddons3 kdeaddons3-kate kdeaddons3-konqueror kdeaddons3-kicker ...
YaST did not recognize my RTL8169 nic, alpha1 did. But on boot it is shown. Firewall is disabled (maybe because there was no nic found) wlan BCM4318 is not supported as in alpha1 internal modem (snd-atiixp-sound) not recognized (well it never works, but 10.0 or Alpha1 found the device)
YaST says: "Warnung: TV-Karten koennen nicht ueberprueft werden" (Warning: Cannot check for TV cards)
The xorg.conf file that was generated by YaST is really funny: Lot's of "vmware" entries and totally unuseable for my ATI X600 PCIE graphics.
YaST did not show up the sshd on networkinstall, but it is started.
Well, rebooting...without framebuffer (deleted vga=0x317) Graphics did not start. So: Switching to runlevel 3 and trying to configure my graphics via "sax2": sax2 starts, shows the background and a mousecursor and after 10 seconds it dies.
Ok, I read the SaX.log...GLX not loaded. I opened xorg.conf...the file is changed! Only "wrong" entry now, the max resolution (800x600), so I changed it to 1280x800.
If I run as root "X" an empty xserver starts up and stay. "rckdm restart" chrashes: linux kdm: :0[4882]: Abnormal termination of greeter for display :0, code 125, signal 0
I set DISPLAYMANAGER="xdm" in /etc/sysconfig/displaymanager rcxdm works, but if I log in as user I end up with an empty desktop and a moveable mouse.In my process list I see: kdeinit Running... dcopserver [kdeinit] --nosid klauncher [kdeinit] kaccess [kdeinit] kwrapper ksmserver ksmserver [kdeinit] kio_file [kdeinit] file .... klipper [kdeinit] suseplugger [kdeinit] -caption knotify [kdeinit] kded kded drkonqi -display :0.0 --appname kded --signal 11 ....
The last process (drkonqi) repeats endless, kded chrashes again and again. Next try: wmaker...also chrashes
Next try: twm...works
Well _this_ seems to be a real "alpha"-version! :-)
-- mdc
Hi meister,I'm sorry you have so problems with this new version. I'm thinking to pass from alpha1 to alpha-3 directly. ;-) Have a luck... Cheers - -- Chema Ollés Usuario Linux: #198057 Linux 2.6.14-rc3-g82984114 #1 SMP Sat Oct 8 15:39:19 CEST 2005 i686 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDWjms65SpD7GhbzoRAl0AAKCLYNFvbUW26rZA7ISPmsS/nWIcFgCfe/XW 101SU70lnYFEAdRxrZnzCrU= =HPHs -----END PGP SIGNATURE-----
participants (3)
-
Adrian Schroeter -
Chema Ollés -
meister＠netz00.com