[opensuse-factory] status: distribution
Hi, I have builds for Milestone7, but I'm facing a heavy dillema: Somehow the base system became unstable without any chances to it that I'm aware of, see e.g. bugzilla.novell.com/537366 And there isn't really much time left to debug this for real as we need to have it on the mirrors before the power loss. But releasing it in this state won't get us many friends. I'm pretty sure it's one or two root causes, the problem is to find them ;( http://download.opensuse.org/factory/iso/ has new ISOs and the factory repo has M7, perhaps more people looking into the problem help. On the good news: The number of build failures is really down to something that would have been acceptable weeks ago ;) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Stephan Kulow <coolo@novell.com> [09-08-09 11:28]:
I have builds for Milestone7, but I'm facing a heavy dillema:
Somehow the base system became unstable without any chances to it that I'm aware of, see e.g. bugzilla.novell.com/537366
And there isn't really much time left to debug this for real as we need to have it on the mirrors before the power loss. But releasing it in this state won't get us many friends. I'm pretty sure it's one or two root causes, the problem is to find them ;(
http://download.opensuse.org/factory/iso/ has new ISOs and the factory repo has M7, perhaps more people looking into the problem help.
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64 -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Op 08-09-09 17:45, Patrick Shanahan schreef:
* Stephan Kulow <coolo@novell.com> [09-08-09 11:28]:
I have builds for Milestone7, but I'm facing a heavy dillema:
Somehow the base system became unstable without any chances to it that I'm aware of, see e.g. bugzilla.novell.com/537366
And there isn't really much time left to debug this for real as we need to have it on the mirrors before the power loss. But releasing it in this state won't get us many friends. I'm pretty sure it's one or two root causes, the problem is to find them ;(
http://download.opensuse.org/factory/iso/ has new ISOs and the factory repo has M7, perhaps more people looking into the problem help.
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
Me too, npwse. -- Enjoy your time around, Oddball (M9.) (Now or never...) OS: Linux 2.6.31-rc8-6-desktop x86_64 Huidige gebruiker: oddball@AMD64x2-SFN1 Systeem: openSUSE 11.2 Milestone 7 (x86_64) KDE: 4.3.1 (KDE 4.3.1) "release 1" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Tuesday 08 September 2009 17:54:51 Oddball wrote:
Op 08-09-09 17:45, Patrick Shanahan schreef:
* Stephan Kulow <coolo@novell.com> [09-08-09 11:28]:
I have builds for Milestone7, but I'm facing a heavy dillema:
Somehow the base system became unstable without any chances to it that I'm aware of, see e.g. bugzilla.novell.com/537366
And there isn't really much time left to debug this for real as we need to have it on the mirrors before the power loss. But releasing it in this state won't get us many friends. I'm pretty sure it's one or two root causes, the problem is to find them ;(
http://download.opensuse.org/factory/iso/ has new ISOs and the factory repo has M7, perhaps more people looking into the problem help.
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days. Will -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Will Stephenson <wstephenson@suse.de> [09-08-09 12:12]:
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
Well, I do have a problem that I had failed to check. Mounting of usb devices does *not* work and appears to be kernel specific, kernel-default-2.6.31-5.2.x86_64 kernel-default-2.6.31-6.1.x86_64 both have this problem, kernel-default-2.6.31-4.2.x86_64 does not. As I am using my system productively, and for the most part successfully, I will have to return to the 4.2 kernel shortly.... :^( bug report: 537068 tks, -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Op 08-09-09 18:29, Patrick Shanahan schreef:
* Will Stephenson <wstephenson@suse.de> [09-08-09 12:12]:
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
Well, I do have a problem that I had failed to check. Mounting of usb devices does *not* work and appears to be kernel specific, kernel-default-2.6.31-5.2.x86_64 kernel-default-2.6.31-6.1.x86_64 both have this problem, kernel-default-2.6.31-4.2.x86_64 does not.
As I am using my system productively, and for the most part successfully, I will have to return to the 4.2 kernel shortly.... :^(
bug report: 537068
tks,
What do you mean with 'USB devices'? An external harddrive, or an usb-stick? Over here usb-stick and usb-cardreader work. -- Enjoy your time around, Oddball (M9.) (Now or never...) OS: Linux 2.6.31-rc8-6-desktop x86_64 Huidige gebruiker: oddball@AMD64x2-SFN1 Systeem: openSUSE 11.2 Milestone 7 (x86_64) KDE: 4.3.1 (KDE 4.3.1) "release 1" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Oddball <monkey9@iae.nl> [09-08-09 14:50]:
What do you mean with 'USB devices'? An external harddrive, or an usb-stick? Over here usb-stick and usb-cardreader work.
Don't have an external "usb" hard-drive, but it sees my card-reader, but not the card and does not see a flash-drive stick. the 4.2 kernel does work, the 5.2 and 6.1 do not, for me, x86_64. -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Patrick Shanahan <ptilopteri@gmail.com> [09-08-09 18:19]:
Don't have an external "usb" hard-drive, but it sees my card-reader, but not the card and does not see a flash-drive stick.
the 4.2 kernel does work, the 5.2 and 6.1 do not, for me, x86_64.
this morning's update to kernel-default-2.6.31-7.1 has solved the problem for me :^). -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, Sep 09, 2009 at 11:15:49AM -0400, Patrick Shanahan wrote:
* Patrick Shanahan <ptilopteri@gmail.com> [09-08-09 18:19]:
Don't have an external "usb" hard-drive, but it sees my card-reader, but not the card and does not see a flash-drive stick.
the 4.2 kernel does work, the 5.2 and 6.1 do not, for me, x86_64.
this morning's update to kernel-default-2.6.31-7.1 has solved the problem for me :^).
Yes, it was an upstream inotify bug that was resolved in the 2.6.31-rc9 release upstream. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Tuesday 08 September 2009 11:11:40 Will Stephenson wrote: ...
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
The same here, on a 32 bit system. Restart hal doesn't help. -- Regards, Rajko http://news.opensuse.org/category/people-of-opensuse/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Tue, 8 Sep 2009 19:01:41 -0500, "Rajko M." <rmatov101@charter.net> wrote:
On Tuesday 08 September 2009 11:11:40 Will Stephenson wrote: ...
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
The same here, on a 32 bit system. Restart hal doesn't help.
same here for 64bit.. anyone know the cause or workaround?
-- Regards, Rajko http://news.opensuse.org/category/people-of-opensuse/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
2009-09-11 09:04 keltezéssel, Per Osbäck írta:
On Tue, 8 Sep 2009 19:01:41 -0500, "Rajko M." <rmatov101@charter.net> wrote:
On Tuesday 08 September 2009 11:11:40 Will Stephenson wrote: ...
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
The same here, on a 32 bit system. Restart hal doesn't help.
same here for 64bit.. anyone know the cause or workaround?
For me the problem went away with 2 reboots :-) I installed it with 'zypper dup' and on the second boot (and most likely also the first, I just did not see it) it was printed, that my filesystem is broken, needs fsck, / is only mounted read only. Strangely I did not get a # prompt to fix it, but the machine booted further, as there was no problem. When I rebooted again, this time to single user, to fix the problems, the filesystem was already all right, and booted without any hald or other problems to runlevel 5. Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Fredag den 11. september 2009 09:04:38 skrev Per Osbäck:
On Tue, 8 Sep 2009 19:01:41 -0500, "Rajko M." <rmatov101@charter.net>
wrote:
On Tuesday 08 September 2009 11:11:40 Will Stephenson wrote: ...
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
The same here, on a 32 bit system. Restart hal doesn't help.
same here for 64bit.. anyone know the cause or workaround?
Read M7 most annoying bugs http://en.opensuse.org/Bugs:Most_Annoying_Bugs_11.2_dev -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
The following is a resend of a message bounced due to the power outage: encapsulated message Re: [opensuse-factory] status: distribution From: Richard <ricreig@gmail.com> To: opensuse-factory@opensuse.org On Tue September 8 2009 8:01:41 pm Rajko M. wrote:
On Tuesday 08 September 2009 11:11:40 Will Stephenson wrote: ...
I have updated, zypper dup, to M7 from M6 and rebooted new kernel w/o a problem. x86_64
And for me hald segfaults on boot and so keyboard and mouse in X and network are broken - Happy days.
The same here, on a 32 bit system. Restart hal doesn't help.
Regards, Rajko
[Bug 537945]. Suggest strongly checking out this bug. In it, there is a FIX. I added the suggested repo, replaced HAL with the version (newer) in there and it fixed the problem completely. --- Richard End of encapsulated message -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Sunday 13 September 2009 13:57:30 Richard wrote:
The following is a resend of a message bounced due to the power outage: ... [Bug 537945]. Suggest strongly checking out this bug. In it, there is a FIX.
I added the suggested repo, replaced HAL with the version (newer) in there and it fixed the problem completely.
Indeed. My procedure was download and rpm -Uvh hal*.rpm I didn't want to add repo: http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/ for this single case. -- Regards, Rajko People of openSUSE editor. Latest interviews: http://news.opensuse.org/category/people-of-opensuse/ About us: http://en.opensuse.org/People_of_openSUSE/About -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Sunday 13 September 2009 14:22:57 Rajko M. wrote: ...
[Bug 537945]. Suggest strongly checking out this bug. In it, there is a FIX.
I added the suggested repo, replaced HAL with the version (newer) in there and it fixed the problem completely.
Indeed. My procedure was download and rpm -Uvh hal*.rpm
I didn't want to add repo: http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/
for this single case.
This is just tested: Hardware: AMD Athlon 64 3200+ Software: LiveCD M7 KDE desktop Mozilla Firefox Bug: Hal doesn't run. Browse to: http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/i586 find hal-0.5.13-16.1 Click on it and use Firefox offer to install package. Open Konsole switch to root: rchal start -- Regards, Rajko People of openSUSE editor. Latest interviews: http://news.opensuse.org/category/people-of-opensuse/ About us: http://en.opensuse.org/People_of_openSUSE/About -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (10)
-
Greg KH -
Martin Schlander -
Oddball -
Patrick Shanahan -
Per Osbäck -
Peter Czanik -
Rajko M. -
Richard -
Stephan Kulow -
Will Stephenson