[opensuse-factory] Re: Resume on (new) laptop with encrypted disk with TW

newer
Re: [opensuse-factory] banned for...

older
[opensuse-factory] zypper dup...

Mari Donkers

27 Jul 2017 27 Jul '17

10:55

"H.Merijn Brand" wrote

...

I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

I'd like the laptop to be functional when I open after hibernation :) Anything I missed?

Are you sure it doesn't eventually emerge from hibernation? I have the exact same setup (except HDD instead of SSD for root file system) and on my system it takes quite a long time (with a blank black screen) for my laptop to finish thawing from hibernation. Suspend is very fast of course. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Show replies by date

H.Merijn Brand

27 Jul 27 Jul

11:05

On Thu, 27 Jul 2017 12:55:03 +0200, Mari Donkers wrote:

...

"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

I'd like the laptop to be functional when I open after hibernation :) Anything I missed?

Are you sure it doesn't eventually emerge from hibernation? I have the exact same setup (except HDD instead of SSD for root file system) and on my system it takes quite a long time (with a blank black screen) for my laptop to finish thawing from hibernation. Suspend is very fast of course.

I just tried 1. Close lid < 2 seconds to go into hibernation 2. Open lid Blank screen with cursor, start counting ± 85 seconds, fan starts ± 166 seconds, screen completely blank foloowed by a reboot -- H.Merijn Brand http://tux.nl Perl Monger http://amsterdam.pm.org/ using perl5.00307 .. 5.27 porting perl5 on HP-UX, AIX, and openSUSE http://mirrors.develooper.com/hpux/ http://www.test-smoke.org/ http://qa.perl.org http://www.goldmark.org/jeff/stupid-disclaimers/

Carlos E. R.

13:40

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2017-07-27 13:05, H.Merijn Brand wrote:

...

On Thu, 27 Jul 2017 12:55:03 +0200, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

I'd like the laptop to be functional when I open after hibernation :) Anything I missed?

Are you sure it doesn't eventually emerge from hibernation? I have the exact same setup (except HDD instead of SSD for root file system) and on my system it takes quite a long time (with a blank black screen) for my laptop to finish thawing from hibernation. Suspend is very fast of course.

I just tried

1. Close lid < 2 seconds to go into hibernation

No, that goes into suspend. Suspend to ram. Hibernation is to disk. You can tell the system to go into hibernation instead on close lid. - -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAll57U4ACgkQja8UbcUWM1xTkgD/RnOQ7rgO4pbtvYb9rbSousmW tq7l1IypXN/11d8GHRcA/ibv0LW5zUptN1ahCZoxh7iqqOfITcdUJ07vRi+csUup =G0d0 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Mari Donkers

11:08

On 27-07-17 12:55, Mari Donkers wrote:

...

"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

I'd like the laptop to be functional when I open after hibernation :) Anything I missed?

Are you sure it doesn't eventually emerge from hibernation? I have the exact same setup (except HDD instead of SSD for root file system) and on my system it takes quite a long time (with a blank black screen) for my laptop to finish thawing from hibernation. Suspend is very fast of course.

BTW: how big is your swap partition? I have 2G more than my RAM size. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Axel Braun

11:27

My guess is more the hybrid graphics card. Dunno what the tool is called to disable the Nvidia before hibernation and enable it afterwards. First test could be to disable it in Bios Schöne Grüße Axel -- Written from cell phone - excuses for typos Am 27. Juli 2017 13:08:04 MESZ schrieb Mari Donkers :

...

On 27-07-17 12:55, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a

...
...
encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open

...
...
lid, I get a black screen with a cursor (that won't move when I use

...
...
touchpad). After a while the system reboots.

I'd like the laptop to be functional when I open after hibernation :) Anything I missed?

Are you sure it doesn't eventually emerge from hibernation? I have

second the the the

...
exact same setup (except HDD instead of SSD for root file system) and on my system it takes quite a long time (with a blank black screen) for my laptop to finish thawing from hibernation. Suspend is very fast of course.

BTW: how big is your swap partition? I have 2G more than my RAM size. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

H.Merijn Brand

11:45

On Thu, 27 Jul 2017 13:27:42 +0200, Axel Braun wrote:

...

My guess is more the hybrid graphics card. Dunno what the tool is called to disable the Nvidia before hibernation and enable it afterwards.

First test could be to disable it in Bios

SPOT ON! You are my local hero for today :) I changed the BIOS setting from Hybrid to Discrete, and all works fine!

...

Axel

-- H.Merijn Brand http://tux.nl Perl Monger http://amsterdam.pm.org/ using perl5.00307 .. 5.27 porting perl5 on HP-UX, AIX, and openSUSE http://mirrors.develooper.com/hpux/ http://www.test-smoke.org/ http://qa.perl.org http://www.goldmark.org/jeff/stupid-disclaimers/

Carlos E. R.

13:42

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2017-07-27 13:08, Mari Donkers wrote:

...

On 27-07-17 12:55, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

That's suspend, not hibernation.

...

BTW: how big is your swap partition? I have 2G more than my RAM size.

Swap is not used during suspend to ram, which is what happens normally when you close the lid. - -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAll57cwACgkQja8UbcUWM1yqrwD/ahafchDmfNBhPDuLx+Tav58N w7ZoEBrGbL76eNW1BGEA/2i2LGB2RLFkI5f1z2VNBBJz/jurlSAhI9zW9jCqob4U =FbCn -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

H.Merijn Brand

13:59

On Thu, 27 Jul 2017 15:42:36 +0200, "Carlos E. R." wrote:

...

On 2017-07-27 13:08, Mari Donkers wrote:

...
On 27-07-17 12:55, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

That's suspend, not hibernation.

Yes, my bad, sorry for the confusion (if any)

...

...
BTW: how big is your swap partition? I have 2G more than my RAM size.

Swap is not used during suspend to ram, which is what happens normally when you close the lid.

And the video-setting in BIOS already solved this case.

...

Carlos E. R.

Mari Donkers

15:43

On 27-07-17 15:42, Carlos E. R. wrote:

...

On 2017-07-27 13:08, Mari Donkers wrote:

...
On 27-07-17 12:55, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

That's suspend, not hibernation.

You can change the behaviour in Power Settings. It might have been hibernation as he said.

...

...
BTW: how big is your swap partition? I have 2G more than my RAM size.

Swap is not used during suspend to ram, which is what happens normally when you close the lid.

Indeed, but you can change it to whatever you want. I have hibernate on power button and suspend on lid close. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Carlos E. R.

17:28

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2017-07-27 17:43, Mari Donkers wrote:

...

On 27-07-17 15:42, Carlos E. R. wrote:

...
On 2017-07-27 13:08, Mari Donkers wrote:

...
On 27-07-17 12:55, Mari Donkers wrote:

...
"H.Merijn Brand" wrote

...
I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes.

When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots.

That's suspend, not hibernation.

You can change the behaviour in Power Settings. It might have been hibernation as he said.

...
...
BTW: how big is your swap partition? I have 2G more than my RAM size.

Swap is not used during suspend to ram, which is what happens normally when you close the lid.

Indeed, but you can change it to whatever you want. I have hibernate on power button and suspend on lid close.

It takes more than two seconds to hibernate from disk or restore back. - -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAll6IssACgkQja8UbcUWM1zbQAD+JzNHi0SycacgXL9tHZJH1ooY mMBhe0Okk9ql+8CdwEEA/iax+8sIFdtab/BxDe9fmxHCNKY/fBWJxaUK3SqntBHt =oRin -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Mari Donkers

17:52

On 27-07-17 19:28, Carlos E. R. wrote:

...

On 2017-07-27 17:43, Mari Donkers wrote:

...
Indeed, but you can change it to whatever you want. I have hibernate on power button and suspend on lid close.

It takes more than two seconds to hibernate from disk or restore back.

It does take much longer on my laptop. But I don't have an SSD and it's already years old. What can one roughly expect for hibernate/thaw with an SSD and a modern laptop? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Carlos E. R.

18:03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2017-07-27 19:52, Mari Donkers wrote:

...

On 27-07-17 19:28, Carlos E. R. wrote:

...
On 2017-07-27 17:43, Mari Donkers wrote:

...
Indeed, but you can change it to whatever you want. I have hibernate on power button and suspend on lid close.

It takes more than two seconds to hibernate from disk or restore back.

It does take much longer on my laptop. But I don't have an SSD and it's already years old. What can one roughly expect for hibernate/thaw with an SSD and a modern laptop?

I have a modern miniserver with SSD, and hibernate takes a bit. Even the bios checking routines take a bit, too. I haven't timed it, I seldom do it, but I think about a minute. Maybe half - the thing is, the display remains blank during most of the procedure, it is difficult to know what phase it is at. - -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAll6KuEACgkQja8UbcUWM1wmvQD/U1fxRBVs8X3A399G3Fnmrq/q zIRuCzqFi9TR2s8tOTcA/3q/aRnGcUMAqsjtZDTLxLd4snuJqU81RZ41OxbXwyuC =lQJ2 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

2471

Age (days ago)

2471

Last active (days ago)

List overview

Download

11 comments

4 participants

participants (4)

Axel Braun
Carlos E. R.
H.Merijn Brand
Mari Donkers