06.12.2014 19:02 Uhr; "Andrei Borzenkov" <arvidjaar@gmail.com>

В Sat, 6 Dec 2014 13:24:49 +0100 ub22@gmx.net пишет:

...

Hi,

I installed Tumbleweed like this description: https://de.opensuse.org/Portal:Tumbleweed/Themen

After the Update, I the system don't boot anymore. The Kernel hangs with

A start job is running for Load Kernel Modules (.../no limit)

Looks like some kernel module hangs during initialization. What's in /etc/modules-load.d?

This directory is empty. # ls -l /etc/mod* /etc/modprobe.d: insgesamt 40 -rw-r--r-- 1 root root 3647 28. Sep 23:23 00-system.conf -rw-r--r-- 1 root root 532 14. Nov 2012 10-unsupported-modules.conf -rw-r--r-- 1 root root 181 24. Nov 18:40 50-alsa.conf -rw-r--r-- 1 root root 4584 7. Nov 09:17 50-blacklist.conf -rw-r--r-- 1 root root 128 26. Nov 12:38 50-bluetooth.conf -rw-r--r-- 1 root root 33 24. Nov 14:52 50-ipw2200.conf -rw-r--r-- 1 root root 34 24. Nov 14:52 50-iwl3945.conf -rw-r--r-- 1 root root 18 24. Nov 14:52 50-prism54.conf -rw-r--r-- 1 root root 47 22. Nov 2011 99-local.conf /etc/modules-load.d: insgesamt 0 In good old /var/log/boot.log I find following (after the boot of the old Kernel - which works): [ INFO ] Network Manager is not active. [DEPEND] Dependency failed for Network Manager Wait Online. Starting Authorization Manager... [ OK ] Reached target Host and Network Name Lookups. Mounting /tmp... [ OK ] Started wicked DHCPv6 supplicant service. [ OK ] Started wicked AutoIPv4 supplicant service. [ OK ] Started System Logging Service. [ OK ] Started wicked DHCPv4 supplicant service. Starting wicked network management service daemon... [ OK ] Started wicked network management service daemon. Starting wicked network nanny service... [ OK ] Started wicked network nanny service. Starting wicked managed network interfaces... [ OK ] Started Activation of LVM2 logical volumes. [ OK ] Started Authorization Manager. [ OK ] Mounted /tmp. [ OK ] Started Modem Manager. [ OK ] Started File System Check on /dev/disk/by-id/ata-ST...-part6. Mounting /mnt/images... [ OK ] Mounted /mnt/images. [* ] (1 of 2) A start job is running for wicked managed network interfaces (6s / no limit)^M[** ] (1 of 2) A start job is running for wicked managed network interfaces (6s / no limit)^M[*** ] (1 of 2) A start job is running for wicked managed network interfaces (7s / no limit)^M[ *** ] (2 of 2) A start job is running for dev-mapper-cr_my.crypt.device (7s / no limit)^M[ *** ] (2 of 2) A start job is running for dev-mapper-cr_my.crypt.device (8s / no limit)^M[ ***] (2 of 2) A start job is running for dev-mapper-cr_my.crypt.device (8s / no limit)^M[ **] (1 of 2) A start job is running for wicked managed network interfaces (8s / no limit)^M[ OK ] Started wicked managed network interfaces. [ OK ] Reached target Network. Starting NIS/YP Clients to NIS Domain Binder... Starting OpenSSH Daemon... Starting NTP Server Daemon... Starting CUPS Printing Service... [ OK ] Started CUPS Printing Service. [ OK ] Reached target Network is Online. Starting LSB: NFS client services... Starting Login and scanning of iSCSI devices... [ OK ] Started Login and scanning of iSCSI devices. Starting Activation of LVM2 logical volumes... [ OK ] Started OpenSSH Daemon. [ OK ] Started NIS/YP Clients to NIS Domain Binder. [ OK ] Reached target User and Group Name Lookups. Starting Command Scheduler... [ OK ] Started Command Scheduler. [ OK ] Started NTP Server Daemon. For me it looks like a sequencing error. The kernel will use the network before the network is present.

...

(I reboot after 1h).

A boot with the same Kernel (in the moment 3.17.4-1-desktop) in recovery mode - no deviation.

Only if I use the old Kernel 3.16.6-2-desktop - the system boots without truble.

Conditions: Tumbleweed /home is mounted via NFS 4.0 on openSUSE 13.2 (Harlequin) (x86_64) Kernel 3.17.1-53.gd944251-desktop (Tumbleweed) Encrypted Filesystem (created via yast2 disk) on a mounted drive

On my second desktop I've in the beginning the same trouble but works after a restart in recovery mode now fine.

I find in the new version nicer a systemctl (before rc...) function to restart this nor I can mount the encfs on the old kernel (segmentation fault). Also the /var/log/messages I can't find any more detailed information.

Any Idea? How I can find the right place in the log - now the log system is again changed :-(

Regards Ulf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Hello Willi,

07.12.2014 00:54 Uhr "Wilhelm Boltz" <lists@boltzclan.de> Hello Ulf,

Am Samstag, 6. Dezember 2014, 13:24:49 schrieb ub22@gmx.net:

...

Hi,

I installed Tumbleweed like this description: https://de.opensuse.org/Portal:Tumbleweed/Themen

[...]

perhaps You should have a look at <https://en.opensuse.org/Tumbleweed> and especially at <https://en.opensuse.org/openSUSE:Tumbleweed_installation#Upgrade>

Looks like the same. I generated a script to do this on all my desktops: # cat /bin/MkTumbleweed.sh #!/bin/bash myOldRepos="/etc/zypp/repos.d/$( date +%F )" mkdir ${myOldRepos} || ( echo "${myOldRepos} exists" ; exit ) mv /etc/zypp/repos.d/*.repo ${myOldRepos} # zypper ar -f -c http://download.opensuse.org/tumbleweed/repo/oss repo-oss zypper ar -f -c http://download.opensuse.org/tumbleweed/repo/non-oss repo-non-oss zypper ar -f -c http://download.opensuse.org/tumbleweed/repo/debug repo-debug zypper ar -f -c http://download.opensuse.org/update/tumbleweed repo-update # zypper ar -f -d -c http://download.opensuse.org/tumbleweed/repo/src-oss repo-src-oss zypper ar -f -d -c http://download.opensuse.org/tumbleweed/repo/src-non-oss repo-src-non-oss # zypper ar -f -c -n packman http://packman.inode.at/suse/openSUSE_Tumbleweed/ packman # # Included after boot trouble #zypper ar -f -c http://download.opensuse.org/distribution/openSUSE-current/repo/oss/ current-oss #zypper ar -f -c http://download.opensuse.org/distribution/openSUSE-current/repo/non-oss/ current-nonoss #zypper ar -f -c http://download.opensuse.org/update/openSUSE-current/ update-oss #zypper ar -f -c http://download.opensuse.org/update/openSUSE-non-oss-current/ update-nonoss # #zypper ar -f -c http://download.opensuse.org/source/distribution/openSUSE-current/repo/oss/ src-oss #zypper ar -f -c http://download.opensuse.org/source/distribution/openSUSE-current/repo/non-o... src-nonoss # #zypper ar -f -c http://download.opensuse.org/debug/distribution/openSUSE-current/repo/oss/ debug-oss # # Show all repositorys, update all references and do the distupdate (with download in advance) zypper lr -u zypper ref zypper dup --download in-advance Regards Ulf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org