* Karol Mroz [08-14-14 20:00]:

On Thu, Aug 14, 2014 at 07:49:37PM -0400, Patrick Shanahan wrote:

...

Just updated to 20140813-factory and kernel 3.16.0 and eth0 no longer works. What has changed and what must I do to get network access??

Hi Patrick,

Could you elaborate a bit on how eth0 is being configured (ie. dhcp) and specifically what kind of error you're seeing? Are you using NetworkManager or Wicked?

Have to use wicked, networkmanager would never work on this box for me ???

If Wicked, providing at least the output from:

`wicked --debug all ifup eth0`

I rebooted the system and now can access eth0, but only have local network access, cannot reach outside my local net/router. The machine ip shows in the routers dhcp client table the output you requested is: http://wahoo.no-ip.org/~pat/wicked.txt

would be helpful.

If I read your mind correctly and assume Wicked+dhcp for eth0, then you might quickly try:

sed -i 's/<use-nanny>true<\/use-nanny>/<use-nanny>false<\/use-nanny>/' /etc/wicked/common.xml

did this

wicked ifup eth0

answers: eth0 up but still only local net access tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

* Karol Mroz [08-14-14 20:46]:

On Thu, Aug 14, 2014 at 08:35:40PM -0400, Patrick Shanahan wrote:

...

* Karol Mroz [08-14-14 20:00]:

...

On Thu, Aug 14, 2014 at 07:49:37PM -0400, Patrick Shanahan wrote:

...

Just updated to 20140813-factory and kernel 3.16.0 and eth0 no longer works. What has changed and what must I do to get network access??

Hi Patrick,

Could you elaborate a bit on how eth0 is being configured (ie. dhcp) and specifically what kind of error you're seeing? Are you using NetworkManager or Wicked?

Have to use wicked, networkmanager would never work on this box for me ???

...

If Wicked, providing at least the output from:

`wicked --debug all ifup eth0`

I rebooted the system and now can access eth0, but only have local network access, cannot reach outside my local net/router. The machine ip shows in the routers dhcp client table

the output you requested is: http://wahoo.no-ip.org/~pat/wicked.txt

Returns error 500 for me.

Attached

Let's check addressing and routing table: `ip a` && `ip r`

1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 70:71:bc:e9:03:c0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::7271:bcff:fee9:3c0/64 scope link valid_lft forever preferred_lft forever 3: enp7s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 70:71:bc:e9:03:c1 brd ff:ff:ff:ff:ff:ff 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.10

Can you reach numerical IP's outside? Trying to see if perhaps we didn't update /etc/resolv.conf?

No, I cannot tks, sorry bout delays, have other duties :^) -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

On Thu, Aug 14, 2014 at 06:44:33PM -0700, Karol Mroz wrote:

On Thu, Aug 14, 2014 at 09:37:01PM -0400, Patrick Shanahan wrote:

...

* Karol Mroz [08-14-14 20:46]:

...

On Thu, Aug 14, 2014 at 08:35:40PM -0400, Patrick Shanahan wrote:

...

* Karol Mroz [08-14-14 20:00]:

...

On Thu, Aug 14, 2014 at 07:49:37PM -0400, Patrick Shanahan wrote:

...

Just updated to 20140813-factory and kernel 3.16.0 and eth0 no longer works. What has changed and what must I do to get network access??

Hi Patrick,

Could you elaborate a bit on how eth0 is being configured (ie. dhcp) and specifically what kind of error you're seeing? Are you using NetworkManager or Wicked?

Have to use wicked, networkmanager would never work on this box for me ???

...

If Wicked, providing at least the output from:

`wicked --debug all ifup eth0`

I rebooted the system and now can access eth0, but only have local network access, cannot reach outside my local net/router. The machine ip shows in the routers dhcp client table

the output you requested is: http://wahoo.no-ip.org/~pat/wicked.txt

Returns error 500 for me.

Attached

...

Let's check addressing and routing table: `ip a` && `ip r`

1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 70:71:bc:e9:03:c0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::7271:bcff:fee9:3c0/64 scope link valid_lft forever preferred_lft forever 3: enp7s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 70:71:bc:e9:03:c1 brd ff:ff:ff:ff:ff:ff 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.10

Looks like you're missing a default route.

To you /etc/sysconfig/network/ifcfg-eth0 file, could you please add:

DHCLIENT_SET_DEFAULT_ROUTE='yes'

And test again?

Also, perhaps keep nanny disabled as mentioned in previous mail, by setting <use-nanny> flag to false in /etc/wicked/common.xml

Thanks, Karol

...

...

Can you reach numerical IP's outside? Trying to see if perhaps we didn't update /etc/resolv.conf?

No, I cannot

tks, sorry bout delays, have other duties :^)

-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

On Thu, Aug 14, 2014 at 09:55:20PM -0400, Patrick Shanahan wrote:

* Karol Mroz [08-14-14 21:50]: [...]

...

...

To you /etc/sysconfig/network/ifcfg-eth0 file, could you please add:

DHCLIENT_SET_DEFAULT_ROUTE='yes'

Missed that, it was set to 'no'

...

...

And test again?

now I have network as should be expected. Tks,

Great, glad it's working for you. -Karol

...

Also, perhaps keep nanny disabled as mentioned in previous mail, by setting <use-nanny> flag to false in /etc/wicked/common.xml

It is *still* set to "false"

tks, much for your help.

I don't understand why this happened. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org