[opensuse-factory] TW 20170702: USB Stick mounted as CD
Hi, I ran into an interesting issue with a USB-Stick. It was used a Netinstall Stick for Tumbleweed long time ago, in between it was formatted as VFAT. When I put it in and try to mount, it is recognized as 'openSUSE-Tumbleweed- NET-x86_6400' (although it has a different name): Error mounting /dev/sdb1 at /run/media/docb/openSUSE-Tumbleweed-NET-x86_6400: Command-line `mount -t "iso9660" -o "uhelper=udisks2,nodev,nosuid,uid=1001,gid=100,iocharset=utf8,mode=0400,dmode=0500" "/dev/sdb1" "/run/media/docb/openSUSE-Tumbleweed-NET-x86_6400"' exited with non-zero exit status 32: mount: /run/media/docb/openSUSE-Tumbleweed-NET- x86_6400: Wrong file system type, invalid option, or superblock of /dev/sdb1 is corrupted. I can mount it manually: mount -t "vfat" -o "uhelper=udisks2,nodev,nosuid,uid=1001,gid=100,iocharset=utf8" "/dev/sdb1" "/ mnt" T520:/home/docb # fsck /dev/sdb1 fsck von util-linux 2.30 fsck.fat 4.1 (2017-01-24) /dev/sdb1: 1 files, 0/61743 clusters Parted gives: Model: Generic Flash Disk (scsi) Disk /dev/sdb: 1013MB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 1013MB 1012MB primary fat16 type=06 My best guess is that KDE stores the Device ID, and based on this tries to mount it as CD? Any other ideas? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Jul 05 2017, Axel Braun <axel.braun@gmx.de> wrote:
What does file say about the contents? Andreas. -- Andreas Schwab, SUSE Labs, schwab@suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Mittwoch, 5. Juli 2017, 12:17:29 CEST schrieb Andreas Schwab:
It shows correctly the three PDF that are on the stick Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Op woensdag 5 juli 2017 12:13:12 CEST schreef Axel Braun:
Probably due to remains of a hybrid filesystem. Try this: destroy partition tables etc: dd if=/dev/zero of=/dev/sdX bs=1M count=100 where X is the alphabetic representing the USB stick. Next create a new partition table and partition, and format with vfat. -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
05.07.2017 13:13, Axel Braun пишет:
How do you try to mount it?
Well, the full device was indeed iso9660; it appears that whatever attempts to mount it gets confused - it sees iso9660 label and applies result of detection of full device to partition. So this is definitely a bug.
So question remains - how do you tried to mount it without using "mount" command?
fdisk would be more useful as parted is too high level. But in principle it is more or less clear. Could you show output of wipefs /dev/sdb wipefs /dev/sdb1 (it won't do anything, just show what signatures were detected; you could use --no-act to be sure). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 2017-07-05 19:16, Andrei Borzenkov wrote:
Known bug. There was a recent thread about it. Bug 1046268 - USB Keys are mis-identified by device notifier Bug 1046096 - Can't mount fat32 USB stick: issue on the partition table -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)
05.07.2017 20:58, Carlos E. R. пишет:
I cannot reproduce this behavior and neither of these bug reports explains how to reproduce it. Someone needs to give exact steps starting with known image. I tried with TW netinstall and I can normally mount partition (although under wrong label, which is a bug, but with well understood root cause).
Hi Andrei, Please explain what is missing from bug 1046096 to reproduce. You explained on bugzilla that you can't reproduce on XFCE for the part where the desktop can't mount. This was never reported: both bugs reported KDE/Plasma being unable to mount. I think it's reasonable to assume these desktop might have different ways to mount a device. Cheers, Pierre. Le jeudi 6 juillet 2017, 16:36:10 NZST Andrei Borzenkov a écrit :
-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Thu, Jul 6, 2017 at 9:01 AM, Pierre de Villemereuil <flyos@mailoo.org> wrote:
Hi Andrei,
Please explain what is missing from bug 1046096 to reproduce. You explained on bugzilla that you can't reproduce on XFCE for the part where the desktop can't mount. This was never reported: both bugs reported KDE/Plasma being unable to mount. I think it's reasonable to assume these desktop might have different ways to mount a device.
This bug got reassigned to udisks because it was shown that udsisk already has wrong filesystem type. Both KDE and XFCE (should) use udisks as backend to discover and mount devices so should have the same issue. If someone could make available image of reasonable size that exhibits this problem it would be good. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Donnerstag, 6. Juli 2017, 08:38:06 CEST schrieb Andrei Borzenkov:
If someone could make available image of reasonable size that exhibits this problem it would be good.
An image of the questionable stick for example? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
I have attached a dumpfile of the first sectors of a non working USB stick in my bug report, is that not something you could use? You'll find it here: https://bugzilla.suse.com/attachment.cgi?id=730322 Using the following command creates a problematic stick (just as reported in the bug reported) for me: dd if=/dev/zero of=/dev/sdb bs=4M dd if=dumpfile of=/dev/sdb bs=1M The USB stick created like this cannot be mounted by KDE/Plasma, but can be mounted by "mount", is seen as a FAT32 by fdisk and as iso9660 by Gparted. I just tested it. I don't think it can get more reproducible than that! ;) Hope this helps! Cheers, Pierre. Le jeudi 6 juillet 2017, 18:55:29 NZST Andrei Borzenkov a écrit :
-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Pierre de Villemereuil wrote:
The USB stick created like this cannot be mounted by KDE/Plasma, but can be mounted by "mount", is seen as a FAT32 by fdisk and as iso9660 by Gparted. I just tested it.
After recent Tumbleweed update I run into this issue as well with two USB sticks formerly used with installation image. The automounting feature (with XFCE) does not work. Also removing all partition(s) with fdisk and adding/formatting new partition does not help. Ciao, Michael.
On 2017-07-06 08:38, Andrei Borzenkov wrote:
Indeed, that bug has instructions: Step to reproduce: 1- Download the Leap ISO, I used the NET install image from: https://software.opensuse.org/distributions/leap 2- Plug a USB key and copy the ISO on the USB key using: sudo dd if=/home/pierre/Downloads/openSUSE-Leap-42.2-NET-x86_64.iso of=/dev/sdc bs=4M status=progress && sync 3- Unplug & Replug (probably not necessary...) 4- Open Gparted, remove partitions on the USB key (don't touch the partition table!), create a new one in FAT32, put a label of your liking (say "MYLABEL"). This was a bit brutal and not cautious, but it creates roughly what you need, a formatted USB stick.
On that same bug there is an attachment with what you request. At least the start of the image, 10 MB. If not, I can try create one and compress it, but I don't have a TW install to check if it reproduces the issue. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)
On 2017-07-06 11:49, Carlos E. R. wrote:
Telcontar:/data/storage_b/Isos/Leap/42.2 # dd if=openSUSE-Leap-42.2-NET-x86_64.iso of=/dev/sde bs=4M status=progress 23+1 records in 23+1 records out 99614720 bytes (100 MB, 95 MiB) copied, 11.8951 s, 8.4 MB/s Telcontar:/data/storage_b/Isos/Leap/42.2 # Telcontar:/data/storage_b/Isos/Leap/42.2 # cd Telcontar:~ # lsblk --output NAME,KNAME,RA,RM,RO,SIZE,TYPE,FSTYPE,LABEL,PARTLABEL,MOUNTPOINT,UUID,PARTUUID,WWN,MODEL,ALIGNMENT,HOTPLUG /dev/sde NAME KNAME RA RM RO SIZE TYPE FSTYPE LABEL PARTLABEL MOUNTPOINT UUID PARTUUID WWN MODEL ALIGNMENT HOTPLUG sde sde 512 1 0 7.2G disk iso9660 openSUSE-Leap-42.2-NET-x86_64028 2016-11-09-10-10-35-00 TF10 0 1 ├─sde1 sde1 512 1 0 3.7M part vfat 1E63-B137 5d2e2084-01 0 1 └─sde2 sde2 512 1 0 91.2M part iso9660 openSUSE-Leap-42.2-NET-x86_64028 2016-11-09-10-10-35-00 5d2e2084-02 0 1 Telcontar:~ # gparted /dev/sde ====================== libparted : 3.1 ====================== (gpartedbin:14143): Gtk-WARNING **: Theme directory base/ of theme oxygen has no size field Telcontar:~ # lsblk --output NAME,KNAME,RA,RM,RO,SIZE,TYPE,FSTYPE,LABEL,PARTLABEL,MOUNTPOINT,UUID,PARTUUID,WWN,MODEL,ALIGNMENT,HOTPLUG /dev/sde NAME KNAME RA RM RO SIZE TYPE FSTYPE LABEL PARTLABEL MOUNTPOINT UUID PARTUUID WWN MODEL ALIGNMENT HOTPLUG sde sde 512 1 0 7.2G disk iso9660 openSUSE-Leap-42.2-NET-x86_64028 2016-11-09-10-10-35-00 TF10 0 1 └─sde1 sde1 512 1 0 7.2G part vfat BUG_1046096 A820-25B5 5d2e2084-01 0 1 Telcontar:~ # file -s /dev/sde /dev/sde: DOS/MBR boot sector Telcontar:~ # file -s /dev/sde1 /dev/sde1: DOS/MBR boot sector Telcontar:~ # Mounting via Thunar poses no problem: Telcontar:~ # mount | grep sde /dev/sde1 on /media/BUG_1046096 type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2) Telcontar:~ # All that on Leap 42. I'm trying to reproduce on a virtual machine with TW, but vmware doesn't make the stick visible to the guest, for some reason it refuses. I tried with an NTFS stick, same thing: the virtual machine does not see it. That's some extra problem I did not expect. Well, I have compressed the image and I can mail it to you, but I don't know if it reproduces the problem on TW or not. [...] The bzip2 compressed image has 4.3 GB, so impossible to email. Well, yes, split it in 10 MB chunks and email some hundreds of emails... (I have a script fro doing that). It is even to big for google drive. Andrei, it would be best if you try to create it following the instructions on the bugzilla. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)
05.07.2017 13:13, Axel Braun пишет:
This is caused by /usr/lib/udev/rules.d/61-persistent-storage-compat.rules, specifically line ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*" Comment it out, it should fix things. You will still get wrong label unless you set label on filesystem on partition explicitly, but filesystem type should now be correct one. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Jul 05 2017, Axel Braun <axel.braun@gmx.de> wrote:
What does file say about the contents? Andreas. -- Andreas Schwab, SUSE Labs, schwab@suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Mittwoch, 5. Juli 2017, 12:17:29 CEST schrieb Andreas Schwab:
It shows correctly the three PDF that are on the stick Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Op woensdag 5 juli 2017 12:13:12 CEST schreef Axel Braun:
Probably due to remains of a hybrid filesystem. Try this: destroy partition tables etc: dd if=/dev/zero of=/dev/sdX bs=1M count=100 where X is the alphabetic representing the USB stick. Next create a new partition table and partition, and format with vfat. -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
05.07.2017 13:13, Axel Braun пишет:
How do you try to mount it?
Well, the full device was indeed iso9660; it appears that whatever attempts to mount it gets confused - it sees iso9660 label and applies result of detection of full device to partition. So this is definitely a bug.
So question remains - how do you tried to mount it without using "mount" command?
fdisk would be more useful as parted is too high level. But in principle it is more or less clear. Could you show output of wipefs /dev/sdb wipefs /dev/sdb1 (it won't do anything, just show what signatures were detected; you could use --no-act to be sure). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 2017-07-05 19:16, Andrei Borzenkov wrote:
Known bug. There was a recent thread about it. Bug 1046268 - USB Keys are mis-identified by device notifier Bug 1046096 - Can't mount fat32 USB stick: issue on the partition table -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)
05.07.2017 20:58, Carlos E. R. пишет:
I cannot reproduce this behavior and neither of these bug reports explains how to reproduce it. Someone needs to give exact steps starting with known image. I tried with TW netinstall and I can normally mount partition (although under wrong label, which is a bug, but with well understood root cause).
participants (8)
-
Andreas Schwab -
Andrei Borzenkov -
Axel Braun -
Carlos E. R. -
Carlos E. R. -
Knurpht - Gertjan Lettink -
Michael Ströder -
Pierre de Villemereuil