[opensuse-factory] usb midi keyboard broken
since kernel 3.3.3-21-desktop my usb midi keyboard stop working. No midi events at all. uname -a Linux ThinkpadSM.rf-studio 3.3.3-21-desktop #1 SMP PREEMPT Mon Apr 23 09:18:43 UTC 2012 (739b98b) x86_64 x86_64 x86_64 GNU/Linux rf@ThinkpadSM:~> amidi -l Dir Device Name IO hw:1,0,0 USB Keystation 88es MIDI 1 rf@ThinkpadSM:~> amidi -p hw:1,0,0 -d ^C 0 bytes read any hint? greetz steffen -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Am 26.04.2012 17:19, schrieb Steffen Müller:
- -- Ralf Lang Linux Consultant / Developer Tel.: +49-170-6381563 Mail: lang@b1-systems.de B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk+ZbHMACgkQCs1dsHJ/X7CnyQCfQQq3yQa8JjhLqlnVzczAD6nI aVMAoNPFPdButibPBEhL2dD/1mvjUnp9 =YbaT -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 04/26/2012 05:19 PM, Steffen Müller wrote:
since kernel 3.3.3-21-desktop my usb midi keyboard stop working. No midi events at all.
Does this mean that 3.3.2 worked? regards, -- js suse labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Jiri Slaby writes:
Does this mean that 3.3.2 worked?
If the keyboard uses class compliant USB MIDI, then yes:
uname -a Linux Box 3.3.2-20-pae #1 SMP Fri Apr 13 20:52:58 UTC 2012 (addbdfa) i686 athlon i386 GNU/Linux
F0 3E 13 00 20 00 00 08 02 F7 F0 3E 13 00 20 00 00 08 05 F7 If on the other hand it needs a firmware loader, then the issue might have to do with it not loading the firmware correctly (although I don't think it would even show up as a MIDI device in ALSA then). Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf microQ V2.22R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/26/2012 09:13 PM, Achim Gratz wrote:
Ok then. It would be interesting to see dmesg output from 3.3.3. regards, - -- js suse labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJPmb1gAAoJEL0lsQQGtHBJA/AP/RmMNFQYI4kyhfBKVtn1aqRT xsiXTxrFMAiIYlU1sqRYEUG0eGZwcdHc0kb/GJXQM8R/3YxXnMT1AE1odnPr5hHm C2TFTS4cB1VZE1WKa+leucvFQlsqI6FDvM1YljX5K0nmBQ4BEQGXv02D6cJEAJOt kl9rCZSUbJKYNU1Ry2OqHq1YEnezi3yB8UKzrpNbDJ6MKq/3u6gSHEZdYKzCEhqt Xb43E+5b7N+C1DKliQW20QkpgfQ1UgKZ/CnTbBbfzh/Nn/O1PrhPMyUC0PK2bGPf itFPUV/Ewe5udABGogcOGNhkwjf2w3Qrb/Q4T0sKl0AEU5YUU1gli09O8WpBISmH mAMMHTKOuiPPreiDeoYo0slizbq3Dyq6qTtKs6hKbxKv4rq7L7sCCgMW/XVLuF0o btgxaObNFc0Z7RZvJ0wl8xrVJFghHxv03tLgPiTa4y9AQSjCzWUtM40kizS8yI78 PJu4Bl3HSX319q+K+ZFmXJyV2xya0/zCtZkVLgm+9ZmHfNqbtsHtDtdFQPAqNUv7 JCgsBRdxedcqoat4F5o1yP93QSP2PLfXyvFTMTu8j/QSJHKF9YWunqyXhHgTODse gG07818eT6kVJJLHOAeiWhokWRRzlIOl/QOXPXgmZ82V0w9NJW8n0wh24uII52Ue vLth27AW1V6S9fufK3aL =UDCS -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Jiri Slaby writes:
Ok then. It would be interesting to see dmesg output from 3.3.3.
I'll install the new kernel today or tomorrow and see what changes. I can always boot 3.3.2 if it really breaks MIDI... Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf Blofeld V1.15B11: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Donnerstag, 26. April 2012, 23:25:52 schrieb Jiri Slaby:
here is my dmesg output: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.3-21-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Mon Apr 23 09:18:43 UTC 2012 (739b98b) [ 0.000000] Command line: root=/dev/disk/by-id/ata-ST9500420AS_5VJE8QXF- part1 resume=/dev/disk/by-id/ata-ST9500420AS_5VJE8QXF-part3 splash=silent quiet i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 pcie_aspm=force i915.lvds_downclock=1 vga=0x317 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ba99f000 (usable) [ 0.000000] BIOS-e820: 00000000ba99f000 - 00000000bae9f000 (reserved) [ 0.000000] BIOS-e820: 00000000bae9f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe800000 - 00000000fe810000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 1143RK2/1143RK2, BIOS 8HET41WW(1.23) 01/13/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ ba995000- ba99f000 [ 0.000000] RAMDISK: 3746e000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000baffe120 0009C (v01 LENOVO TP-8H 00000123 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000bafec000 000F4 (v03 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000bafef000 09B1D (v01 LENOVO TP-8H 00000123 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf35000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-8H 00000123 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00A1F (v01 LENOVO SataSec 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baffb000 008C6 (v01 LENOVO SataPri 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baffa000 0078A (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baff9000 001F9 (v01 LENOVO PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000bafee000 000A5 (v32 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafeb000 00038 (v01 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafea000 00098 (v01 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafe9000 0003C (v01 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafe8000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe7000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe5000 0003E (v01 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe4000 0026A (v01 LENOVO TP-8H 00000123 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000- ffff88023e3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000ba99f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2074413 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 745944 pages, LIFO batch:31 [ 0.000000] Normal zone: 17913 pages used for memmap [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ba99f000 - 00000000bae9f000 [ 0.000000] PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe800000 [ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fe810000 [ 0.000000] PM: Registered nosave memory: 00000000fe810000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79488 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042159 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata- ST9500420AS_5VJE8QXF-part1 resume=/dev/disk/by-id/ata-ST9500420AS_5VJE8QXF- part3 splash=silent quiet i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 pcie_aspm=force i915.lvds_downclock=1 vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8088036k/9435136k available (6010k kernel code, 1137484k absent, 209616k reserved, 6990k data, 940k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2394.582 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.16 BogoMIPS (lpj=2394582) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000038] Security Framework initialized [ 0.000050] AppArmor: AppArmor initialized [ 0.000747] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003200] Mount-cache hash table entries: 256 [ 0.003292] Initializing cgroup subsys cpuacct [ 0.003294] Initializing cgroup subsys memory [ 0.003307] Initializing cgroup subsys devices [ 0.003309] Initializing cgroup subsys freezer [ 0.003311] Initializing cgroup subsys net_cls [ 0.003312] Initializing cgroup subsys blkio [ 0.003317] Initializing cgroup subsys perf_event [ 0.003342] Disabled fast string operations [ 0.003344] CPU: Physical Processor ID: 0 [ 0.003345] CPU: Processor Core ID: 0 [ 0.003349] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003350] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003352] mce: CPU supports 7 MCE banks [ 0.003363] CPU0: Thermal monitoring enabled (TM1) [ 0.003368] using mwait in idle threads. [ 0.004116] ACPI: Core revision 20120111 [ 0.015581] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025572] CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz stepping 07 [ 0.127392] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.127397] PEBS disabled due to CPU errata. [ 0.127399] ... version: 3 [ 0.127400] ... bit width: 48 [ 0.127401] ... generic registers: 4 [ 0.127402] ... value mask: 0000ffffffffffff [ 0.127404] ... max period: 000000007fffffff [ 0.127405] ... fixed-purpose events: 3 [ 0.127406] ... event mask: 000000070000000f [ 0.135603] NMI watchdog enabled, takes one hw-pmu counter. [ 0.143397] Booting Node 0, Processors #1 [ 0.143403] smpboot cpu 1: start_ip = 98000 [ 0.154414] Disabled fast string operations [ 0.174504] NMI watchdog enabled, takes one hw-pmu counter. [ 0.180348] #2 [ 0.180351] smpboot cpu 2: start_ip = 98000 [ 0.191461] Disabled fast string operations [ 0.211547] NMI watchdog enabled, takes one hw-pmu counter. [ 0.217288] #3 [ 0.217291] smpboot cpu 3: start_ip = 98000 [ 0.228399] Disabled fast string operations [ 0.248484] NMI watchdog enabled, takes one hw-pmu counter. [ 0.250203] Brought up 4 CPUs [ 0.250208] Total of 4 processors activated (19156.65 BogoMIPS). [ 0.253985] devtmpfs: initialized [ 0.255264] PM: Registering ACPI NVS region at bae9f000 (1048576 bytes) [ 0.255422] print_constraints: dummy: [ 0.255453] RTC time: 7:23:24, date: 04/27/12 [ 0.255494] NET: Registered protocol family 16 [ 0.255660] ACPI: bus type pci registered [ 0.255729] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.255731] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.264588] PCI: Using configuration type 1 for base access [ 0.265500] bio: create slab <bio-0> at 0 [ 0.265584] ACPI: Added _OSI(Module Device) [ 0.265586] ACPI: Added _OSI(Processor Device) [ 0.265588] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.265589] ACPI: Added _OSI(Processor Aggregator Device) [ 0.267794] ACPI: EC: Look up EC in DSDT [ 0.270010] ACPI: Executed 1 blocks of module-level executable AML code [ 0.275074] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.275870] ACPI: SSDT 00000000bae8f718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.276485] ACPI: Dynamic OEM Table Load: [ 0.276487] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.276858] ACPI: SSDT 00000000bae90a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.277533] ACPI: Dynamic OEM Table Load: [ 0.277535] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.277689] ACPI: SSDT 00000000bae8ed98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.278297] ACPI: Dynamic OEM Table Load: [ 0.278299] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.679475] ACPI: Interpreter enabled [ 0.679477] ACPI: (supports S0 S1 S3 S4 S5) [ 0.679511] ACPI: Using IOAPIC for interrupt routing [ 0.685818] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.686040] ACPI: No dock devices found. [ 0.686043] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.686508] \_SB_.PCI0:_OSC invalid UUID [ 0.686509] _OSC request data:1 8 1f [ 0.686512] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.687282] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.687284] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.687286] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.687289] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.687291] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.687322] PCI host bridge to bus 0000:00 [ 0.687324] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.687326] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.687327] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.687329] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff] [ 0.687330] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.687338] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.687374] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 0.687384] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.687390] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.687394] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.687447] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.687470] pci 0000:00:16.0: reg 10: [mem 0xd2605000-0xd260500f 64bit] [ 0.687549] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.687585] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.687606] pci 0000:00:1a.0: reg 10: [mem 0xd260a000-0xd260a3ff] [ 0.687697] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.687724] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.687739] pci 0000:00:1b.0: reg 10: [mem 0xd2600000-0xd2603fff 64bit] [ 0.687808] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.687832] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.687912] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.687938] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.688017] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.688044] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 0.688123] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.688149] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.688229] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.688262] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604 [ 0.688392] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.688431] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.688452] pci 0000:00:1d.0: reg 10: [mem 0xd2609000-0xd26093ff] [ 0.688544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.688572] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601 [ 0.688698] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.688716] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f] [ 0.688724] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097] [ 0.688732] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087] [ 0.688740] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093] [ 0.688748] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.688756] pci 0000:00:1f.2: reg 24: [mem 0xd2608000-0xd26087ff] [ 0.688801] pci 0000:00:1f.2: PME# supported from D3hot [ 0.688821] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.688836] pci 0000:00:1f.3: reg 10: [mem 0xd2604000-0xd26040ff 64bit] [ 0.688858] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.688932] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.689060] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.689128] pci 0000:02:00.0: reg 10: [io 0x4000-0x40ff] [ 0.689247] pci 0000:02:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref] [ 0.689322] pci 0000:02:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 0.689655] pci 0000:02:00.0: supports D1 D2 [ 0.689656] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.691536] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.691545] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.691564] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.691822] pci 0000:03:00.0: [1180:e823] type 0 class 0x000880 [ 0.691840] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz. [ 0.691866] pci 0000:03:00.0: reg 10: [mem 0xd1e00000-0xd1e000ff] [ 0.692061] pci 0000:03:00.0: supports D1 D2 [ 0.692063] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.693572] pci 0000:00:1c.2: PCI bridge to [bus 03-07] [ 0.693590] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.693594] pci 0000:00:1c.2: bridge window [mem 0xd1e00000-0xd25fffff] [ 0.693600] pci 0000:00:1c.2: bridge window [mem 0xd0500000-0xd0cfffff 64bit pref] [ 0.693801] pci 0000:08:00.0: [8086:0084] type 0 class 0x000280 [ 0.693962] pci 0000:08:00.0: reg 10: [mem 0xd1d00000-0xd1d01fff 64bit] [ 0.694770] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.696566] pci 0000:00:1c.3: PCI bridge to [bus 08-08] [ 0.696586] pci 0000:00:1c.3: bridge window [mem 0xd1d00000-0xd1dfffff] [ 0.696662] pci 0000:00:1c.7: PCI bridge to [bus 09-0d] [ 0.696667] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] [ 0.696672] pci 0000:00:1c.7: bridge window [mem 0xd1500000-0xd1cfffff] [ 0.696681] pci 0000:00:1c.7: bridge window [mem 0xd0d00000-0xd14fffff 64bit pref] [ 0.696710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.696866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.696908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.696950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.696992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.697040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.697144] \_SB_.PCI0:_OSC invalid UUID [ 0.697145] _OSC request data:1 1f 1f [ 0.697148] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.697192] \_SB_.PCI0:_OSC invalid UUID [ 0.697193] _OSC request data:1 0 1d [ 0.697195] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.697197] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.701409] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.701472] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.701529] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.701585] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.701646] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.701703] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.701760] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.701816] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.701891] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.701898] vgaarb: loaded [ 0.701899] vgaarb: bridge control possible 0000:00:02.0 [ 0.702016] SCSI subsystem initialized [ 0.702057] libata version 3.00 loaded. [ 0.702092] usbcore: registered new interface driver usbfs [ 0.702103] usbcore: registered new interface driver hub [ 0.702122] usbcore: registered new device driver usb [ 0.702172] PCI: Using ACPI for IRQ routing [ 0.704100] PCI: pci_cache_line_size set to 64 bytes [ 0.704545] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.704547] reserve RAM buffer: 00000000ba99f000 - 00000000bbffffff [ 0.704549] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.704551] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.704638] NetLabel: Initializing [ 0.704640] NetLabel: domain hash size = 128 [ 0.704640] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.704650] NetLabel: unlabeled traffic allowed by default [ 0.704659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.704663] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.706679] Switching to clocksource hpet [ 0.708980] AppArmor: AppArmor Filesystem Enabled [ 0.708999] pnp: PnP ACPI init [ 0.709012] ACPI: bus type pnp registered [ 0.709436] pnp 00:00: [bus 00-3e] [ 0.709439] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.709440] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.709442] pnp 00:00: [io 0x0d00-0xffff window] [ 0.709444] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.709445] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.709447] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.709449] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.709450] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.709452] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.709454] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.709455] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.709457] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.709458] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.709460] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.709462] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.709464] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.709466] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.709467] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.709469] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.709529] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.709605] pnp 00:01: [io 0x06a4] [ 0.709607] pnp 00:01: [io 0x06a0] [ 0.709644] system 00:01: [io 0x06a4] has been reserved [ 0.709646] system 00:01: [io 0x06a0] has been reserved [ 0.709648] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.709660] pnp 00:02: [io 0x0000-0x001f] [ 0.709662] pnp 00:02: [io 0x0081-0x0091] [ 0.709663] pnp 00:02: [io 0x0093-0x009f] [ 0.709665] pnp 00:02: [io 0x00c0-0x00df] [ 0.709667] pnp 00:02: [dma 4] [ 0.709686] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.709695] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.709714] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.709815] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.709834] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.709845] pnp 00:05: [io 0x00f0] [ 0.709853] pnp 00:05: [irq 13] [ 0.709873] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.709885] pnp 00:06: [io 0x002e-0x002f] [ 0.709886] pnp 00:06: [io 0x004e-0x004f] [ 0.709888] pnp 00:06: [io 0x0061] [ 0.709889] pnp 00:06: [io 0x0063] [ 0.709890] pnp 00:06: [io 0x0065] [ 0.709891] pnp 00:06: [io 0x0067] [ 0.709892] pnp 00:06: [io 0x0070] [ 0.709894] pnp 00:06: [io 0x0080] [ 0.709895] pnp 00:06: [io 0x0092] [ 0.709896] pnp 00:06: [io 0x00b2-0x00b3] [ 0.709898] pnp 00:06: [io 0x1000-0x100f] [ 0.709899] pnp 00:06: [io 0xffff] [ 0.709900] pnp 00:06: [io 0xffff] [ 0.709901] pnp 00:06: [io 0x0400-0x0453] [ 0.709903] pnp 00:06: [io 0x0458-0x047f] [ 0.709905] pnp 00:06: [io 0x0500-0x057f] [ 0.709906] pnp 00:06: [io 0x0068-0x006f] [ 0.709908] pnp 00:06: [mem 0xfe800000-0xfe80ffff] [ 0.709944] system 00:06: [io 0x1000-0x100f] has been reserved [ 0.709946] system 00:06: [io 0xffff] has been reserved [ 0.709948] system 00:06: [io 0xffff] has been reserved [ 0.709950] system 00:06: [io 0x0400-0x0453] has been reserved [ 0.709952] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.709954] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.709956] system 00:06: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.709959] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.709968] pnp 00:07: [io 0x0070-0x0077] [ 0.709973] pnp 00:07: [irq 8] [ 0.709994] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.710024] pnp 00:08: [io 0x0454-0x0457] [ 0.710055] system 00:08: [io 0x0454-0x0457] has been reserved [ 0.710057] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.710066] pnp 00:09: [io 0x0060] [ 0.710068] pnp 00:09: [io 0x0064] [ 0.710072] pnp 00:09: [irq 1] [ 0.710093] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.710104] pnp 00:0a: [irq 12] [ 0.710125] pnp 00:0a: Plug and Play ACPI device, IDs LEN0023 PNP0f13 (active) [ 0.710262] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.710264] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.710265] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.710267] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.710268] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.710270] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.710271] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.710272] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.710274] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.710275] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.710277] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.710314] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.710317] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.710319] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.710321] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.710323] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.710325] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.710327] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.710329] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.710331] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved [ 0.710333] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.710335] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.710607] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.710609] pnp 00:0c: [mem 0x40000000-0x401fffff] [ 0.710657] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved [ 0.710659] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved [ 0.710662] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.710681] pnp: PnP ACPI: found 13 devices [ 0.710682] ACPI: ACPI bus type pnp unregistered [ 0.717196] PCI: max bus depth: 1 pci_try_num: 2 [ 0.717243] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.717254] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.717257] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.717265] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.717271] pci 0000:00:1c.2: PCI bridge to [bus 03-07] [ 0.717275] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.717280] pci 0000:00:1c.2: bridge window [mem 0xd1e00000-0xd25fffff] [ 0.717284] pci 0000:00:1c.2: bridge window [mem 0xd0500000-0xd0cfffff 64bit pref] [ 0.717291] pci 0000:00:1c.3: PCI bridge to [bus 08-08] [ 0.717296] pci 0000:00:1c.3: bridge window [mem 0xd1d00000-0xd1dfffff] [ 0.717304] pci 0000:00:1c.7: PCI bridge to [bus 09-0d] [ 0.717308] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] [ 0.717314] pci 0000:00:1c.7: bridge window [mem 0xd1500000-0xd1cfffff] [ 0.717320] pci 0000:00:1c.7: bridge window [mem 0xd0d00000-0xd14fffff 64bit pref] [ 0.717371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.717373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.717374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.717376] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.717378] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.717380] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.717381] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.717383] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.717385] pci_bus 0000:03: resource 1 [mem 0xd1e00000-0xd25fffff] [ 0.717386] pci_bus 0000:03: resource 2 [mem 0xd0500000-0xd0cfffff 64bit pref] [ 0.717388] pci_bus 0000:08: resource 1 [mem 0xd1d00000-0xd1dfffff] [ 0.717390] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 0.717391] pci_bus 0000:09: resource 1 [mem 0xd1500000-0xd1cfffff] [ 0.717393] pci_bus 0000:09: resource 2 [mem 0xd0d00000-0xd14fffff 64bit pref] [ 0.717456] NET: Registered protocol family 2 [ 0.717675] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.719538] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.720718] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.720861] TCP: Hash tables configured (established 524288 bind 65536) [ 0.720862] TCP reno registered [ 0.720878] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.720910] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.721017] NET: Registered protocol family 1 [ 0.721029] pci 0000:00:02.0: Boot video device [ 0.721339] PCI: CLS 64 bytes, default 64 [ 0.721376] Unpacking initramfs... [ 0.908011] Freeing initrd memory: 11784k freed [ 0.909612] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.909616] Placing 64MB software IO TLB between ffff8800b6995000 - ffff8800ba995000 [ 0.909618] software IO TLB at phys 0xb6995000 - 0xba995000 [ 0.910227] audit: initializing netlink socket (disabled) [ 0.910241] type=2000 audit(1335511403.750:1): initialized [ 0.928320] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.929048] VFS: Disk quotas dquot_6.5.2 [ 0.929077] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.929349] msgmni has been set to 15819 [ 0.929568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.929605] io scheduler noop registered [ 0.929607] io scheduler deadline registered [ 0.929626] io scheduler cfq registered (default) [ 0.930008] vesafb: mode is 1024x768x16, linelength=2048, pages=41 [ 0.930009] vesafb: scrolling: redraw [ 0.930011] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.930482] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90005800000, using 3072k, total 65472k [ 0.957601] Console: switching to colour frame buffer device 128x48 [ 0.984619] fb0: VESA VGA frame buffer device [ 0.984627] intel_idle: MWAIT substates: 0x21120 [ 0.984628] intel_idle: v0.4 model 0x2A [ 0.984629] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.984663] GHES: HEST is not enabled! [ 0.984707] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.985246] Non-volatile memory driver v1.3 [ 0.985247] Linux agpgart interface v0.103 [ 0.985311] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 0.985411] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.986425] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.986533] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 0.986630] ahci 0000:00:1f.2: version 3.0 [ 0.986683] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.986713] ahci: SSS flag set, parallel bus scan disabled [ 0.997394] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.997403] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.997413] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.001809] scsi0 : ahci [ 1.001906] scsi1 : ahci [ 1.001965] scsi2 : ahci [ 1.002024] scsi3 : ahci [ 1.002082] scsi4 : ahci [ 1.002142] scsi5 : ahci [ 1.002677] ata1: SATA max UDMA/133 abar m2048@0xd2608000 port 0xd2608100 irq 40 [ 1.002679] ata2: DUMMY [ 1.002680] ata3: DUMMY [ 1.002681] ata4: DUMMY [ 1.002683] ata5: SATA max UDMA/133 abar m2048@0xd2608000 port 0xd2608300 irq 40 [ 1.002686] ata6: SATA max UDMA/133 abar m2048@0xd2608000 port 0xd2608380 irq 40 [ 1.002765] Fixed MDIO Bus: probed [ 1.002766] arcnet loaded. [ 1.002768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.002813] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.002817] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.002840] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.002871] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.006738] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.006752] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd260a000 [ 1.012337] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.012395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.012401] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.012406] usb usb1: Product: EHCI Host Controller [ 1.012410] usb usb1: Manufacturer: Linux 3.3.3-21-desktop ehci_hcd [ 1.012423] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.012529] hub 1-0:1.0: USB hub found [ 1.012532] hub 1-0:1.0: 2 ports detected [ 1.012602] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.012605] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.012610] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.012631] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.016517] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.016531] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd2609000 [ 1.022319] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.022368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.022373] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.022378] usb usb2: Product: EHCI Host Controller [ 1.022382] usb usb2: Manufacturer: Linux 3.3.3-21-desktop ehci_hcd [ 1.022386] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.022494] hub 2-0:1.0: USB hub found [ 1.022497] hub 2-0:1.0: 2 ports detected [ 1.022548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.022557] uhci_hcd: USB Universal Host Controller Interface driver [ 1.022584] Initializing USB Mass Storage driver... [ 1.022605] usbcore: registered new interface driver usb-storage [ 1.022606] USB Mass Storage support registered. [ 1.022613] usbcore: registered new interface driver ums-alauda [ 1.022619] usbcore: registered new interface driver ums-cypress [ 1.022625] usbcore: registered new interface driver ums-datafab [ 1.022632] usbcore: registered new interface driver ums-freecom [ 1.022639] usbcore: registered new interface driver ums-isd200 [ 1.022645] usbcore: registered new interface driver ums-jumpshot [ 1.022652] usbcore: registered new interface driver ums-karma [ 1.022658] usbcore: registered new interface driver ums-onetouch [ 1.022665] usbcore: registered new interface driver ums-sddr09 [ 1.022671] usbcore: registered new interface driver ums-sddr55 [ 1.022677] usbcore: registered new interface driver ums-usbat [ 1.022709] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.025003] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.025025] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.025115] mousedev: PS/2 mouse device common for all mice [ 1.025209] rtc_cmos 00:07: RTC can wake from S4 [ 1.025321] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.025349] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.025427] cpuidle: using governor ladder [ 1.025515] cpuidle: using governor menu [ 1.025517] EFI Variables Facility v0.08 2004-May-17 [ 1.025665] usbcore: registered new interface driver usbhid [ 1.025667] usbhid: USB HID core driver [ 1.025822] TCP cubic registered [ 1.025915] NET: Registered protocol family 10 [ 1.026279] lib80211: common routines for IEEE802.11 drivers [ 1.026281] lib80211_crypt: registered algorithm 'NULL' [ 1.026282] Registering the dns_resolver key type [ 1.026309] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 1.026424] PM: Checking hibernation image partition /dev/disk/by-id/ata- ST9500420AS_5VJE8QXF-part3 [ 1.040349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.306979] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.309150] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.309161] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.309169] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.310983] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100 [ 1.310992] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.313295] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.313305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.313313] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.313945] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.315070] ata1.00: configured for UDMA/100 [ 1.315350] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 [ 1.315584] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.315779] sd 0:0:0:0: [sda] Write Protect is off [ 1.315782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.315865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.356537] sda: sda1 sda2 sda3 [ 1.357478] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.428237] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.428246] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.428680] hub 1-1:1.0: USB hub found [ 1.428853] hub 1-1:1.0: 6 ports detected [ 1.531604] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.619488] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.621450] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 1.621461] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.621468] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.621479] ata5.00: ATAPI: HL-DT-STDVDRAM GT33N, LE02, max UDMA/66 [ 1.623705] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 1.623716] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.623724] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.623737] ata5.00: configured for UDMA/66 [ 1.625518] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LE02 PQ: 0 ANSI: 5 [ 1.645786] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.645795] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.646230] hub 2-1:1.0: USB hub found [ 1.646408] hub 2-1:1.0: 6 ports detected [ 1.720442] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd [ 1.721711] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400 [ 1.721733] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.755116] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 1.810185] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c018 [ 1.810194] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.810201] usb 1-1.2: Product: USB Optical Mouse [ 1.810205] usb 1-1.2: Manufacturer: Logitech [ 1.812968] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 [ 1.813268] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 1.886315] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd [ 1.909048] Refined TSC clocksource calibration: 2394.560 MHz. [ 1.909060] Switching to clocksource tsc [ 1.930005] ata6: SATA link down (SStatus 0 SControl 300) [ 1.973188] usb 1-1.3: New USB device found, idVendor=0763, idProduct=0192 [ 1.973197] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.973203] usb 1-1.3: Product: USB Keystation 88es [ 1.973207] usb 1-1.3: Manufacturer: M-Audio [ 2.047940] usb 1-1.5: new high-speed USB device number 5 using ehci_hcd [ 2.139307] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b257 [ 2.139316] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.139322] usb 1-1.5: Product: Integrated Camera [ 2.139326] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd. [ 2.202722] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd [ 2.306070] usb 2-1.2: New USB device found, idVendor=413c, idProduct=2105 [ 2.306080] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.306086] usb 2-1.2: Product: Dell USB Keyboard [ 2.306090] usb 2-1.2: Manufacturer: Dell [ 2.322885] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 [ 2.323127] generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 2.396423] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd [ 2.492214] usb 2-1.5: New USB device found, idVendor=0bdb, idProduct=1911 [ 2.492224] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.492230] usb 2-1.5: Product: F5521gw [ 2.492234] usb 2-1.5: Manufacturer: Lenovo [ 2.492237] usb 2-1.5: SerialNumber: 30AA3B5F34E89E00 [ 6.242153] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 6.421154] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4 [ 6.485009] PM: Hibernation image not present or could not be loaded. [ 6.485034] registered taskstats version 1 [ 6.485770] Magic number: 8:579:370 [ 6.485879] rtc_cmos 00:07: setting system clock to 2012-04-27 07:23:30 UTC (1335511410) [ 6.487324] Freeing unused kernel memory: 940k freed [ 6.487431] Write protecting the kernel read-only data: 12288k [ 6.487947] Freeing unused kernel memory: 116k freed [ 6.492629] Freeing unused kernel memory: 1892k freed [ 6.523330] udevd[104]: starting version 173 [ 6.533388] ACPI: Requesting acpi_cpufreq [ 6.541398] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 6.542439] ACPI: Lid Switch [LID0] [ 6.542510] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 6.543366] ACPI: Power Button [PWRF] [ 6.546640] [drm] Initialized drm 1.1.0 20060810 [ 6.551699] i915 0000:00:02.0: setting latency timer to 64 [ 6.553980] ACPI Error: No handler for Region [ECRM] (ffff880234c9da98) [EmbeddedControl] (20120111/evregion-376) [ 6.553987] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20120111/exfldio-306) [ 6.553993] ACPI Error: Method parse/execution failed [\_TZ_.RDEC] (Node ffff8802350844c0), AE_NOT_EXIST (20120111/psparse-536) [ 6.554003] ACPI Error: Method parse/execution failed [\_TZ_.TZS0._TMP] (Node ffff880235084448), AE_NOT_EXIST (20120111/psparse-536) [ 6.554283] thermal LNXTHERM:01: registered as thermal_zone0 [ 6.554287] ACPI: Thermal Zone [TZS1] (41 C) [ 6.626220] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 6.626229] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.626231] [drm] Driver supports precise vblank timestamp query. [ 6.626264] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.247138] checking generic (c0000000 3ff0000) vs hw (c0000000 10000000) [ 7.247141] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 7.247154] Console: switching to colour dummy device 80x25 [ 7.247612] fbcon: inteldrmfb (fb0) is primary device [ 7.771527] Console: switching to colour frame buffer device 170x48 [ 7.774008] fb0: inteldrmfb frame buffer device [ 7.774009] drm: registered panic notifier [ 7.775798] acpi device:43: registered as cooling_device4 [ 7.776078] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 7.776120] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.776140] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.821159] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 7.821163] PM: Marking nosave pages: 00000000ba99f000 - 00000000bafff000 [ 7.821199] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000 [ 7.822015] PM: Basic memory bitmaps created [ 7.848367] PM: Basic memory bitmaps freed [ 7.848371] video LNXVIDEO:00: Restoring backlight state [ 7.857376] PM: Starting manual resume from disk [ 7.857379] PM: Hibernation image partition 8:3 present [ 7.857380] PM: Looking for hibernation image. [ 7.857682] PM: Image not found (code -22) [ 7.857686] PM: Hibernation image not present or could not be loaded. [ 8.001803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 8.205064] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr [ 8.801210] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 9.139353] systemd[1]: Set hostname to <ThinkpadSM.rf-studio>. [ 11.043083] systemd-readahead-replay[394]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 11.170747] udevd[405]: starting version 173 [ 12.541691] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr [ 12.702044] boot.localnet[420]: Using boot-specified hostname 'ThinkpadSM.rf-studio' [ 12.702057] boot.localnet[420]: Setting up hostname 'ThinkpadSM'..done [ 12.743234] boot.localnet[420]: Setting up loopback interface RTNETLINK answers: File exists [ 12.744222] boot.localnet[420]: ..done [ 13.458255] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 13.458406] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 13.458584] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 13.458651] iTCO_vendor_support: vendor-support=0 [ 13.458856] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc900057aa000, f0:de:f1:8b:aa:17, XID 0c200000 IRQ 42 [ 13.458859] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 13.459530] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251) [ 13.459538] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.459756] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 13.459857] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 13.459921] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 13.461685] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.463070] cfg80211: Calling CRDA to update world regulatory domain [ 13.466062] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 13.466671] mei 0000:00:16.0: setting latency timer to 64 [ 13.466749] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 13.467480] sdhci: Secure Digital Host Controller Interface driver [ 13.467483] sdhci: Copyright(c) Pierre Ossman [ 13.467930] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4) [ 13.468169] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator [ 13.468441] Registered led device: mmc0:: [ 13.468987] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 13.468990] Copyright(c) 2003-2011 Intel Corporation [ 13.469098] iwlwifi 0000:08:00.0: pci_resource_len = 0x00002000 [ 13.469101] iwlwifi 0000:08:00.0: pci_resource_base = ffffc900057e0000 [ 13.469103] iwlwifi 0000:08:00.0: HW Revision ID = 0x0 [ 13.469197] iwlwifi 0000:08:00.0: irq 44 for MSI/MSI-X [ 13.469245] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 13.469247] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 13.469249] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 13.469251] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 13.469252] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_P2P disabled [ 13.469259] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 13.469324] iwlwifi 0000:08:00.0: L1 Disabled; Enabling L0S [ 13.469976] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA [ 13.470141] sdhci-pci 0000:03:00.0: could not set regulator OCR (-22) [ 13.474732] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 13.474867] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 13.475035] ACPI: AC Adapter [ADP1] (on-line) [ 13.505715] sdhci-pci 0000:03:00.0: could not set regulator OCR (-22) [ 13.509006] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 13.509009] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.509011] thinkpad_acpi: ThinkPad BIOS 8HET41WW(1.23), EC unknown [ 13.509013] thinkpad_acpi: Lenovo ThinkPad E520, model 1143RK2 [ 13.509043] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 13.509053] ACPI: Battery Slot [BAT0] (battery present) [ 13.510683] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 13.513990] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it [ 13.513996] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation [ 13.515387] thinkpad_acpi: asked for hotkey mask 0x0077ffff, but firmware forced it to 0x0003887c [ 13.517179] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 13.517414] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 13.517722] iwlwifi 0000:08:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 13.517725] iwlwifi 0000:08:00.0: Device SKU: 0x50 [ 13.517727] iwlwifi 0000:08:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 13.517739] iwlwifi 0000:08:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 13.519114] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is blocked [ 13.519180] Registered led device: tpacpi::thinklight [ 13.519196] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 13.519293] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 13.521077] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 13.521941] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 13.524097] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 13.526496] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 13.526838] iwlwifi 0000:08:00.0: loaded firmware version 39.31.5.1 build 35138 [ 13.526985] Registered led device: phy0-led [ 13.531916] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 13.541661] sdhci-pci 0000:03:00.0: could not set regulator OCR (-22) [ 13.576617] sdhci-pci 0000:03:00.0: could not set regulator OCR (-22) [ 13.778656] ifup[686]: Service network not started and mode 'auto' -> skipping [ 13.786501] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.786541] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 13.789301] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 13.789306] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 13.789474] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 13.808063] ifup[714]: Service network not started and mode 'auto' -> skipping [ 13.820063] cfg80211: World regulatory domain updated: [ 13.820066] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.820068] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.820070] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.820072] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.820073] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.820075] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.997997] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 13.998092] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.178129] udevd[792]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5 2 4': No such file or directory [ 15.179242] udevd[793]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 1 3': No such file or directory [ 15.180634] udevd[798]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5 1 5': No such file or directory [ 15.181655] udevd[795]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 2 3': No such file or directory [ 15.182495] udevd[797]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 1 4': No such file or directory [ 15.726850] Linux video capture interface: v2.00 [ 15.765629] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b257) [ 15.767161] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11 [ 15.767300] usbcore: registered new interface driver uvcvideo [ 15.767302] USB Video Class driver (1.1.1) [ 15.773792] cdc_wdm 2-1.5:1.5: cdc-wdm0: USB WDM device [ 15.773866] cdc_wdm 2-1.5:1.8: cdc-wdm1: USB WDM device [ 15.773897] usbcore: registered new interface driver cdc_wdm [ 15.773975] cdc_acm 2-1.5:1.1: ttyACM0: USB ACM device [ 15.774587] cdc_acm 2-1.5:1.3: ttyACM1: USB ACM device [ 15.775711] usbcore: registered new interface driver snd-usb-audio [ 15.803670] usb 2-1.5: MAC-Address: 0x02:0x80:0x37:0xec:0x02:0x00 [ 15.804036] cdc_ncm 2-1.5:1.6: usb0: register 'cdc_ncm' at usb-0000:00:1d.0-1.5, CDC NCM, 02:80:37:ec:02:00 [ 15.804069] usbcore: registered new interface driver cdc_ncm [ 15.804148] cdc_acm 2-1.5:1.9: ttyACM2: USB ACM device [ 15.806918] usbcore: registered new interface driver cdc_acm [ 15.806921] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 15.831569] ifup[974]: Service network not started and mode 'auto' -> skipping [ 16.582347] Adding 2099196k swap on /dev/sda3. Priority:0 extents:1 across:2099196k [ 16.704181] systemd-fsck[983]: /dev/sda2: sauber, 549193/28434432 Dateien, 76689882/113708032 Blöcke (Prüfung nach 3 Einhängevorgängen) [ 17.808339] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 17.837388] ALSA midi.c:214 urb status -32 [ 17.838232] ALSA midi.c:214 urb status -32 [ 17.839230] ALSA midi.c:214 urb status -32 [ 17.840102] ALSA midi.c:214 urb status -32 [ 17.840976] ALSA midi.c:214 urb status -32 [ 17.841849] ALSA midi.c:214 urb status -32 [ 17.842723] ALSA midi.c:214 urb status -32 [ 17.843600] ALSA midi.c:214 urb status -32 [ 17.844472] ALSA midi.c:214 urb status -32 [ 17.845346] ALSA midi.c:214 urb status -32 [ 17.846218] ALSA midi.c:214 urb status -32 [ 17.847091] ALSA midi.c:214 urb status -32 [ 17.847966] ALSA midi.c:214 urb status -32 [ 17.848619] ALSA midi.c:192 usb_submit_urb: -113 [ 18.412334] tlp[1005]: Loading tp-smapi kernel module...done. [ 18.428695] tlp[1005]: Disabling radios: bluetooth wifi wwan. [ 18.429874] tlp[1005]: Setting battery charge thresholds...done. [ 19.231803] vboxdrv: Found 4 processor cores. [ 19.232041] vboxdrv: fAsync=0 offMin=0x153 offMax=0xf7b [ 19.232086] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.232087] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000). [ 19.408883] r8169 0000:02:00.0: eth0: link down [ 19.409372] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.413380] ADDRCONF(NETDEV_UP): usb0: link is not ready [ 19.419251] cdc_ncm: usb0: network connection: disconnected [ 19.439382] vboxpci: IOMMU not found (not registered) [ 20.965634] r8169 0000:02:00.0: eth0: link up [ 20.966078] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.029433] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0 [ 21.033608] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 21.116308] r8169 0000:02:00.0: eth0: link down [ 21.116357] r8169 0000:02:00.0: eth0: link down [ 21.117693] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.679798] r8169 0000:02:00.0: eth0: link up [ 22.680367] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.216260] eth0: no IPv6 routers present [ 63.838727] fuse init (API version 7.18) [ 200.645628] usb 1-1.3: USB disconnect, device number 4 [ 205.423660] usb 1-1.3: new full-speed USB device number 6 using ehci_hcd [ 205.510786] usb 1-1.3: New USB device found, idVendor=0763, idProduct=0192 [ 205.510795] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 205.510801] usb 1-1.3: Product: USB Keystation 88es [ 205.510805] usb 1-1.3: Manufacturer: M-Audio [ 207.557807] ALSA midi.c:214 urb status -32 [ 207.557994] ALSA midi.c:214 urb status -32 [ 207.558242] ALSA midi.c:214 urb status -32 [ 207.558542] ALSA midi.c:214 urb status -32 [ 207.558915] ALSA midi.c:214 urb status -32 [ 207.559116] ALSA midi.c:214 urb status -32 [ 207.559414] ALSA midi.c:214 urb status -32 [ 207.559664] ALSA midi.c:214 urb status -32 [ 207.559864] ALSA midi.c:214 urb status -32 [ 207.560113] ALSA midi.c:214 urb status -32 [ 207.560413] ALSA midi.c:214 urb status -32 [ 207.560613] ALSA midi.c:214 urb status -32 [ 207.560862] ALSA midi.c:214 urb status -32 [ 207.561111] ALSA midi.c:214 urb status -32 [ 207.561412] ALSA midi.c:214 urb status -32 [ 207.561627] ALSA midi.c:214 urb status -32 [ 207.561861] ALSA midi.c:214 urb status -32 [ 207.562110] ALSA midi.c:214 urb status -32 [ 207.562376] ALSA midi.c:214 urb status -32 [ 207.562609] ALSA midi.c:214 urb status -32 [ 207.562858] ALSA midi.c:214 urb status -32 [ 207.563108] ALSA midi.c:214 urb status -32 [ 207.563355] ALSA midi.c:214 urb status -32 [ 207.563608] ALSA midi.c:214 urb status -32 [ 207.563857] ALSA midi.c:214 urb status -32 [ 207.564107] ALSA midi.c:214 urb status -32 [ 207.564353] ALSA midi.c:214 urb status -32 [ 207.564606] ALSA midi.c:214 urb status -32 [ 207.564855] ALSA midi.c:214 urb status -32 [ 207.565105] ALSA midi.c:214 urb status -32 [ 207.565356] ALSA midi.c:214 urb status -32 [ 207.565605] ALSA midi.c:214 urb status -32 [ 207.565854] ALSA midi.c:214 urb status -32 [ 207.566104] ALSA midi.c:214 urb status -32 [ 207.566350] ALSA midi.c:214 urb status -32 [ 207.566603] ALSA midi.c:214 urb status -32 [ 207.566852] ALSA midi.c:214 urb status -32 [ 207.567102] ALSA midi.c:214 urb status -32 [ 207.567349] ALSA midi.c:214 urb status -32 [ 207.567601] ALSA midi.c:214 urb status -32 [ 207.567851] ALSA midi.c:214 urb status -32 [ 207.568100] ALSA midi.c:214 urb status -32 [ 224.418062] usb 1-1.3: USB disconnect, device number 6 [ 227.662396] usb 1-1.3: new full-speed USB device number 7 using ehci_hcd [ 227.749541] usb 1-1.3: New USB device found, idVendor=0763, idProduct=0192 [ 227.749550] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 227.749556] usb 1-1.3: Product: USB Keystation 88es [ 227.749560] usb 1-1.3: Manufacturer: M-Audio [ 229.750236] ALSA midi.c:214 urb status -32 [ 229.750700] ALSA midi.c:214 urb status -32 [ 229.750911] ALSA midi.c:214 urb status -32 [ 229.751175] ALSA midi.c:214 urb status -32 [ 229.751413] ALSA midi.c:214 urb status -32 [ 229.751659] ALSA midi.c:214 urb status -32 [ 229.751910] ALSA midi.c:214 urb status -32 [ 229.752210] ALSA midi.c:214 urb status -32 [ 229.752459] ALSA midi.c:214 urb status -32 [ 229.752662] ALSA midi.c:214 urb status -32 [ 229.752907] ALSA midi.c:214 urb status -32 [ 229.753208] ALSA midi.c:214 urb status -32 [ 229.753457] ALSA midi.c:214 urb status -32 [ 229.753660] ALSA midi.c:214 urb status -32 [ 229.753906] ALSA midi.c:214 urb status -32 [ 229.754206] ALSA midi.c:214 urb status -32 [ 229.754456] ALSA midi.c:214 urb status -32 [ 229.754658] ALSA midi.c:214 urb status -32 [ 229.754904] ALSA midi.c:214 urb status -32 [ 229.755204] ALSA midi.c:214 urb status -32 [ 229.755421] ALSA midi.c:214 urb status -32 [ 229.755656] ALSA midi.c:214 urb status -32 [ 229.755903] ALSA midi.c:214 urb status -32 [ 229.756170] ALSA midi.c:214 urb status -32 [ 229.756418] ALSA midi.c:214 urb status -32 [ 229.756654] ALSA midi.c:214 urb status -32 [ 229.756901] ALSA midi.c:214 urb status -32 [ 229.757168] ALSA midi.c:214 urb status -32 [ 229.757416] ALSA midi.c:214 urb status -32 [ 229.757653] ALSA midi.c:214 urb status -32 [ 229.757900] ALSA midi.c:214 urb status -32 [ 229.758166] ALSA midi.c:214 urb status -32 [ 229.758401] ALSA midi.c:214 urb status -32 [ 229.758652] ALSA midi.c:214 urb status -32 [ 229.758899] ALSA midi.c:214 urb status -32 [ 229.759153] ALSA midi.c:214 urb status -32 [ 229.759402] ALSA midi.c:214 urb status -32 [ 229.759650] ALSA midi.c:214 urb status -32 [ 229.759896] ALSA midi.c:214 urb status -32 [ 229.760164] ALSA midi.c:214 urb status -32 [ 229.760412] ALSA midi.c:214 urb status -32 [ 229.760649] ALSA midi.c:214 urb status -32 [ 229.760895] ALSA midi.c:214 urb status -32 and this is tail -f /var/log/messages when I plug the usb midi keyboard in: ... Apr 27 09:36:40 ThinkpadSM kernel: [ 795.467626] usb 1-1.3: USB disconnect, device number 7 Apr 27 09:36:44 ThinkpadSM kernel: [ 799.479188] usb 1-1.3: new full-speed USB device number 8 using ehci_hcd Apr 27 09:36:44 ThinkpadSM kernel: [ 799.566198] usb 1-1.3: New USB device found, idVendor=0763, idProduct=0192 Apr 27 09:36:44 ThinkpadSM kernel: [ 799.566208] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 27 09:36:44 ThinkpadSM kernel: [ 799.566214] usb 1-1.3: Product: USB Keystation 88es Apr 27 09:36:44 ThinkpadSM kernel: [ 799.566218] usb 1-1.3: Manufacturer: M- Audio Apr 27 09:36:44 ThinkpadSM udevd[2795]: failed to execute '/lib/udev/mtp- probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 1 8': No such file or directory Apr 27 09:36:46 ThinkpadSM kernel: [ 801.663768] ALSA midi.c:214 urb status -32 Apr 27 09:36:46 ThinkpadSM kernel: [ 801.663988] ALSA midi.c:214 urb status -32 Apr 27 09:36:46 ThinkpadSM kernel: [ 801.664200] ALSA midi.c:214 urb status -32 Apr 27 09:36:46 ThinkpadSM kernel: [ 801.664448] ALSA midi.c:214 urb status -32 Apr 27 09:36:46 ThinkpadSM kernel: [ 801.664703] ALSA midi.c:214 urb status -32 .... regards, steffen
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/27/2012 09:37 AM, Steffen Müller wrote:
Hmm... I suspect some USB patches added in 3.3.3... Alan, Greg, any ideas? 3.3.2 is reported to work. thanks, - -- js suse labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJPmk7tAAoJEL0lsQQGtHBJRjMQAISHi8yIkLvpJDZjKM/uY5px II9wXE8D4rhgjXaeOADFS92lPyaLES1IJYRudh5QRRsOfguU7y0iZSbqukpaaJse EOcQSRvtKjzQOn0qmvAuYDORYLWELJG+TDeMas+4ecBFygEmzIAkmgULJsw1dkQR L7H7B+pVL9lKdBQg0annMxxqPkxbrRL8kYu4ZkNOLhKdk6SNcMw4KBq7xVQc1Jfa GwDdHdpE6/2D9UE4fiEU4q7FTCeF+on1GYnpw8+P6CJT2ovNcp0GF1TeW4q5yAMx YgkOjyUXzYnbz5j9jHVkZgOgCXKudj/AdexuehMnC+YXqPFG40cc0KHWHhBh5LbG 7TJ6zJ0bby7yazk3mV1P099eR6YinB7zsHWHhW6COwh4t6ZeWOAQVUbL2mAFoOZy Dq9S8wVnQKj+/M5ewWjTnX6yVbySJ/wDfVRx+HRiyEvARqFyHC9EdAsQG+aHHlU1 RDu+56CprOnkvsNXaZUabRUZVfOyVfpYeWBXEkcd8nSDmqUnnOUpgy4035YjTsAf MU8ph+r3PqepDyjW1uaE+CTApGjD38Dxrt070yxtqOhBntBZp/WXYUkDq5BQEcnr o35xfluDIiUQzhYzbO92Qr+MA03moVcQXG72s+2cnAWdTw5+zo3VCHfEgZtdpmFN 2mRV1ljPbjt9314rGTXv =vE/l -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Fri, 27 Apr 2012, Jiri Slaby wrote:
No ideas. It would be good to see a usbmon trace, with as many other USB devices unplugged as possible. Even better would be to see also a second usbmon trace from a working kernel. Alan Stern -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Oh man! After look and try many usr relevant settings I found the malfactor: tlp usb autosuspend settings. I use tlp (energy-saving tools for thinkpad laptops) and they autosuspend usb devices by default. Now I have blacklisted my midi keyboard an all is good. I can reproduce the problem this way. Seems so that the midi keyboard doesn't wake up if it once sleeping. For all with similar problems: edit /etc/default/tlp and set USB_BLACKLIST="<device id from usbls>" or disable usb autosuspend entirely with USB_AUTOSUSPEND=0 thanks and sorry for the bother. steffen Am Freitag, 27. April 2012, 11:26:12 schrieb Alan Stern:
Am Samstag, 28. April 2012, 13:45:56 schrieb Steffen Müller:
No problem, but we ought to test whether we can make it work with a kernel quirk. Can you please test whether it works with USB_QUIRK_RESET_RESUME in drivers/usb/core/quirks.c ? Regards Oliver -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Samstag, 28. April 2012, 17:30:04 schrieb Oliver Neukum:
yes, it works now without blacklisting for autosuspend after build patched kernel with this in drivers/usb/core/quirks.c rf@ThinkpadSM:~/tmp> diff -uNr quirks-org.c quirks.c --- quirks-org.c 2012-04-28 23:19:45.440959001 +0200 +++ quirks.c 2012-04-28 20:38:50.000000000 +0200 @@ -123,6 +123,9 @@ /* Guillemot Webcam Hercules Dualpix Exchange*/ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Midiman M-Audio Keystation 88es */ + { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, rf@ThinkpadSM:~/tmp> regards steffen
Am Samstag, 28. April 2012, 23:26:58 schrieb Steffen Müller:
Could you please send a formal patch with "Signed-off-by" and stuff upstream? Regards Oliver -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am 30.04.2012 11:00, schrieb Steffen Müller:
Am Montag, 30. April 2012, 10:48:21 schrieb Oliver Neukum:
Am Samstag, 28. April 2012, 23:26:58 schrieb Steffen Müller:
Use the attached one (I used you as author and added a signed-off-by) Oliver, who is upstream here? You? Best regards, Stefan -- Stefan Seyfried "Dispatch war rocket Ajax to bring back his body!"
Am Montag, 30. April 2012, 12:39:53 schrieb Stefan Seyfried:
Thank you! steffen -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Montag, 30. April 2012, 12:39:53 schrieb Stefan Seyfried:
This is core code. It goes directly to Greg. "Greg Kroah-Hartman" <gregkh@linuxfoundation.org> Regards Oliver -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Tested-by: Steffen Müller <steffen.mueller@radio-frei.de> Signed-off-by: Steffen Müller <steffen.mueller@radio-frei.de> Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4c65eb6..32d3adc 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -123,6 +123,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Guillemot Webcam Hercules Dualpix Exchange*/ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Midiman M-Audio Keystation 88es */ + { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Jiri Slaby writes:
Ok then. It would be interesting to see dmesg output from 3.3.3.
This 3.3.3 kernel does work for me:
F0 3E 13 00 20 00 00 08 02 F7 F0 3E 13 00 20 00 00 08 05 F7 F0 3E 13 00 20 00 00 08 08 F7 F0 3E 13 00 20 00 00 08 09 F7^C 40 bytes read I have another MIDI interface that needs firmware loading and that appears to work, too (I haven't tested that it actually sends/receives MIDI). I connected both devices after logging in to KDE, in the past I had trouble with the MIDI interface when it was plugged in during boot since it often did not receive the firmware in this case. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf rackAttack: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Donnerstag, 26. April 2012, 19:34:20 schrieb Jiri Slaby:
but yes, it worked before, but I'm not sure if it was on 3.3.2 or a previous kernel version since I don't remember when I used the keyboard the last time and I allways update the kernel if there is a new one in tumbleweed
participants (9)
-
Achim Gratz -
Alan Stern -
Felipe Balbi -
Jiri Slaby -
Oliver Neukum -
Oliver Neukum -
Ralf Lang -
Stefan Seyfried -
Steffen Müller