On Sat, Sep 22, 2007 at 11:11:17AM +0200, M9. wrote:

Hi,

Do i have to file a bug report for this?

...

monkey9@tribal-sfn2:~> su Wachtwoord: tribal-sfn2:/home/monkey9 # zypper update -t packages Onbekend type oplosbare: packages

zypper update -t package Without 's'. Ciao, Marcus --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Marcus Meissner wrote:

On Sat, Sep 22, 2007 at 11:11:17AM +0200, M9. wrote:

...

Hi,

Do i have to file a bug report for this?

...

monkey9@tribal-sfn2:~> su Wachtwoord: tribal-sfn2:/home/monkey9 # zypper update -t packages Onbekend type oplosbare: packages

zypper update -t package

Without 's'.

Ciao, Marcus After trying your above suggestion. some of the output was omitted. zypper update -t package

Problem: yast2-gtk cannot be installed due to missing dependencies Problem: No valid solution found with just resolvables of best architecture. With this run only resolvables with the best architecture have been regarded. Problem: gdm cannot be installed due to missing dependencies Problem: Can't satisfy requirement /sbin/update-bootloader for kernel-bigsmp-2.6.22.5-25.i586 Regarding all resolvables with a compatible architecture. number, (r)etry or (c)ancel> c -- 73 de Donn Washburn 307 Savoy Street Email: " n5xwb@hal-pc.org " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb@arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 Did you know? The transistor was invented by three white men. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

M9. escribió:

thnx, did not notice that, me stupid.. ;-0

No, you are not, is just that zypper up -t package is not quite intuitive :( I think zypper upgrade (or something like zypper upgrade-all) should do what you want (and there is bugzilla entry for that IIRC) -- "You don't have to burn books to destroy a culture. Just get people to stop reading them." --Ray Bradbury Cristian Rodríguez R. SUSE LINUX Products GmbH Research & Development --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Miquel A. Noguera schreef:

El Martes, 25 de Septiembre de 2007 06:08:09 Cristian Rodriguez escribió:

...

I think zypper upgrade (or something like zypper upgrade-all) should do what you want (and there is bugzilla entry for that IIRC)

I agree too.

Of course now zypper is a lot better than previous versions, but still it needs some improvements so it becomes the tool that really we are looking for.

Regards.

Zypper works fine, and very fast. This command is not in the help yet, so i think it might not be completely set? # zypper upgrade-all is certainly more intuitive, but where to place like fi: -v or -t? - -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.22.5-29-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.3 (x86_64) KDE: 3.5.7 "release 71" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFG+LVtX5/X5X6LpDgRAnsmAKCaQJ7R3S7H5GUwv89Hn/OdwYBKYgCeL91v 1iwQAk2bmHla5TS68lHAxN0= =wLmK -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

* Miquel A. Noguera [Sep 25. 2007 08:09]:

Of course now zypper is a lot better than previous versions, but still it needs some improvements so it becomes the tool that really we are looking for.

So what are you really looking for ? What kind of improvements do you want to see in zypper ? Klaus --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

El Martes, 25 de Septiembre de 2007 09:58:05 Klaus Kaempf escribió: Hi, Klaus.

So what are you really looking for ? What kind of improvements do you want to see in zypper ?

Don't worry: my wishlist is ready and I'm planning to post it here or where it is necessary to discuss it and to go for it ;-) Nevertheless, now it's too late for final 10.3, so I think is better to wait it is released and tested, and then we ask for enhancements. When you think that it is the right moment to discuss it, just let me know. Regards. Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Klaus Kaempf wrote:

* Igor Jagec [Sep 25. 2007 09:40]:

...

Are there any plans to include features like limit rate while downloading (on Yum it is called Throttle) and repo priorities? Repo priorities are in the queue, yes.

That's great, thanks.

Throttle is not on the list yet. Can you provide a use-case for it ?

You meant on something like that: # zypper update --limit-rate=80k # zypper update --throttle=80k ? BTW it would be very nice if you make man pages for zypp.conf file. I gues we can "tweak" it :) I have another question about Zypper, do you have any plan to include Rollback support? Or at least support for some rpm transacrion set, such as noscripts, notriggers, nodocs, test, repackage... Rollback is a nice feature and I use it on my Fedora 7 machines. Cheers! - -- Igor Jagec -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFG+PYFkUCZ6zGRt4ARAnmXAKCLrmDWlpKljt6019YhlFx9+Mz7RQCeObeT kQmIJyFzWbiPxGWte8TOXdw= =cr09 -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

On Uto, 2007-09-25 at 13:56 +0200, Klaus Kaempf wrote:

* Igor Jagec [Sep 25. 2007 13:49]:

...

...

Throttle is not on the list yet. Can you provide a use-case for it ? You meant on something like that: # zypper update --limit-rate=80k # zypper update --throttle=80k No, I meant a description why and when such an option would be useful.

This option is for instance useful for us who share Internet connection with neighbors. Or when we don't want to use all bandwidth we have for updating system or installing software. The problem is that I share Internet connection with my neighbors via wireless network and if I do some big downloads without bandwidth limitation, they (neighbors) are sometimes unable to use Internet at all. Broadband Internet connection (ADSL in our case) is very expensive here in Croatia, so we usually share Internet connection. I know, maybe we should have QoS or something, but we do not have implemented such advanced solutions. It's a bit overkill for our small network.

...

I have another question about Zypper, do you have any plan to include Rollback support? Or at least support for some rpm transacrion set, such as noscripts, notriggers, nodocs, test, repackage... Rollback is a nice feature and I use it on my Fedora 7 machines. Yes, this is planned.

That's great, thanks!

However, the term 'rollback' has quite different meanings depending on whom you talk to. As we support a wide range of architectures with our SUSE Linux software, rollback for e.g. zSeries (IBM s/390) users means 'bit identical' reversion to a previous state. Thats rather hard to achieve with rpm.

I didn't know that, thanks. -- Igor Jagec

El Martes, 25 de Septiembre de 2007 13:56:22 Klaus Kaempf escribió:

...

You meant on something like that:

# zypper update --limit-rate=80k # zypper update --throttle=80k

No, I meant a description why and when such an option would be useful.

It will be great too the possibility of freshen an update server (physical or virtual) in our local network without consuming all the bandwidth, allowing to reuse downloaded files in several boxes / several times. Thus we could test new updates in a virtual machine and, if everything works as espected, then apply the changes to the real system without to download them again. Of course, this implies we need to keep downloaded files, wich I don't know if it's possible actually with zypper (is it?) Regards. Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

El Martes, 25 de Septiembre de 2007 20:23:48 Cristian Rodriguez escribió:

...

...that's the reason why I use SmartPM. At least for now.

Smart is nota solution.

Unfortunately we haven't had "any solution" in 10.1 or 10.2, "only" non supported workarounds such as smart or apt :-( In 10,3 zypper is so good that we will only need apt/smart in few occasions, and probably in 11.0 we will be able to forget them definitively :-) Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Dňa Tuesday 25 September 2007 20:49:43 Miquel A. Noguera ste napísal:

El Martes, 25 de Septiembre de 2007 20:23:48 Cristian Rodriguez escribió:

...

...

...that's the reason why I use SmartPM. At least for now.

Smart is nota solution.

Unfortunately we haven't had "any solution" in 10.1 or 10.2, "only" non supported workarounds such as smart or apt :-(

In 10,3 zypper is so good that we will only need apt/smart in few occasions, and probably in 11.0 we will be able to forget them definitively :-)

In which occasions? Stano --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

El Miércoles, 26 de Septiembre de 2007 10:36:27 Stanislav Visnovsky escribió:

...

In 10,3 zypper is so good that we will only need apt/smart in few occasions, and probably in 11.0 we will be able to forget them definitively

:-)

In which occasions?

Occasion 2 ========== apt allows to block automatic updates for desired packages. If it is known kenrel-x.y.z or package-a.b.c broks our system, we don't want it to be updated until there is a new trusted version available. With apt, all I have to do is edit /etc/apt/apt.conf and add problematic packages to de "Hold" line. Do zypper provide a similar function? Regards. Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Dňa Wednesday 26 September 2007 12:37:06 Miquel A. Noguera ste napísal:

El Miércoles, 26 de Septiembre de 2007 10:36:27 Stanislav Visnovsky escribió:

...

...

In 10,3 zypper is so good that we will only need apt/smart in few occasions, and probably in 11.0 we will be able to forget them definitively

:-)

In which occasions?

Occasion 2 ==========

apt allows to block automatic updates for desired packages.

If it is known kenrel-x.y.z or package-a.b.c broks our system, we don't want it to be updated until there is a new trusted version available.

With apt, all I have to do is edit /etc/apt/apt.conf and add problematic packages to de "Hold" line.

Do zypper provide a similar function?

Would /etc/zypp/locks help? See 'man zypper'. Stano --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

El Miércoles, 26 de Septiembre de 2007 10:36:27 Stanislav Visnovsky escribió:

In which occasions?

occasion 3: =========== zypper downloads a package, applies it and then goes for next package. It means our box can be in a inconsistent state until update is finised (even hours). With apt (or smart) all packages are first downloaded and they will be installed only when all required packages are downloaded, wich will shorten dramatically this time. Additionally, if conection is down during update proces, never knows what will happen with zypper (may be our box will be in a inconsistent state until conection is available again). With apt/smart this problem doesn't exist. Instead interrubted download will be resumed for saving our time. I am wrong? Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

El Miércoles, 26 de Septiembre de 2007 12:58:44 Stanislav Visnovsky escribió:

...

With apt, all I have to do is edit /etc/apt/apt.conf and add problematic packages to de "Hold" line.

Do zypper provide a similar function?

Would /etc/zypp/locks help? See 'man zypper'.

Oh, probably yes. I looked it before, but for shure I did not pay sufficient attention to LOOKS section. So, I must put one indidual line for each package to retain (wilcards accepted. For example kernel-bigsmp-2.6.22.5-29 or just kernel-bigsmp*) Right? Is it handled in any way from yast2? Thanks. Miquel. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Miquel A. Noguera wrote:

El Miércoles, 26 de Septiembre de 2007 12:58:44 Stanislav Visnovsky escribió:

...

...

With apt, all I have to do is edit /etc/apt/apt.conf and add problematic packages to de "Hold" line.

Do zypper provide a similar function? Would /etc/zypp/locks help? See 'man zypper'.

Oh, probably yes. I looked it before, but for shure I did not pay sufficient attention to LOOKS section.

So, I must put one indidual line for each package to retain (wilcards accepted. For example kernel-bigsmp-2.6.22.5-29 or just kernel-bigsmp*) Right? # Nope, it goes like this: kernel-bigsmp # or kernel-bigsmp* # if you want to avoid installing/updating/removing all versions of # kernel-bigsmp or packages matching kernel-bigsmp*

# or the folloving if you want avoid installing/updating/removing # a specific version of it kernel-bigsmp > x.x.x.x

Is it handled in any way from yast2?

I don't think so. Jano --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Dňa Saturday 24 November 2007 16:21:48 ste napísal:

On Wed, 26 Sep 2007, Stanislav Visnovsky wrote:

...

Would /etc/zypp/locks help? See 'man zypper'.

Hmm, what happened to that? On FACTORY:

gp@rana:~> man zypper | grep lock Reformatting zypper(8), please wait...

gp@rana:~> rpm -q zypper zypper-0.6.15-0.4

visnov@mammoth:~> zypper -V zypper 0.8.25 Try 'zypper in zypper' first.

The only file the FILES section of the man page refers to is /var/lib/zypp/cache.

The SEE ALSO section only refers to rug(1) and YaST2(8), none of which covers /etc/zypp/locks.

Also, should the zypper man page still refer to rug(1)?

It provides rug backward compatibility, so it kind of makes sense. Stano --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org